Narrow By:

• Manufacturer: Industrial

• Product Type

  

  • 200A Surface MTRD 14X26 (1)
  • 200A Surface MTRD 14X26 Neutral (1)
  • Air Conditioning Disconnect Switch (1)
  • Loadcenter (1)
  • Midwest 40A Evap Cooler SW F STL N3R (1)
  • Midwest 60/60A Heat Pump F 10HP N3R (1)
  • MW 100A Post 50/30/20gfci (1)
  • MW 200A Standby (1)
  • MW 30A GD Acd F 7.5HP STL N3R (1)
  • MW 50A Surface Unmtrd (1)
  • MW 60A Acd NF 3PH 15HP STL N3R (1)
  • MW HD Xfer SW 200/200A 2P 120/240V (1)
  • Non-Automatic Disconnect Switch (1)
  • Residential Oh/Ug (Dual CNT) (1)
  • Ringless (1)
  • Safety Switch (3)
  • Terminal Box 400A 16X29 3PH (1)
  • Show More...

• Brand

  

  • Industrial Conn & Sol (1)
  • MIDWEST (18)
  • Show More...

• Current Rating

  

  • 200 A (1)
  • 30 A (1)
  • 400 A (1)
  • 60 A (4)
  • Show More...

• Material

  

  • Galvanized Steel (1)
  • Galvanized Steel or Aluminum (1)
  • Metallic (1)
  • Thermoplastic (2)
  • Thermoplastic (Enclosure) (2)
  • Zinc Coated Steel (1)
  • Show More...

• Number Of Phases

  

  • 1 (4)
  • 3 (2)
  • Show More...

• Voltage Rating

  

  • 120/240 (3)
  • 120/240 V (1)
  • 120/240 V ac (1)
  • 240 (4)
  • 240 V @ 1 Phase (1)
  • 600 (1)
  • Show More...

• Overall Height

  

  • 14-3/8 in (1)
  • 26 in (1)
  • 33 in (1)
  • 7 in (1)
  • 7-1/4 in (2)
  • 9 in (1)
  • Show More...

• Overall Length

  

  • 17 in (1)
  • 30-3/8 in (1)
  • 5 in (4)
  • 7-1/4 in (1)
  • Show More...

• Overall Width

  

  • 2-1/8 in (1)
  • 2-3/4 in (3)
  • 4.7 in (1)
  • 5-3/16 in (1)
  • 6-1/8 in (1)
  • Show More...

• Power Rating

  

  • 10 hp (3)
  • 7.5 to 15 hp (1)
  • Show More...

• Wire Size

  

  • #1 AWG to 300 kcmil (1)
  • #14 to #8 AWG (Solid);#14 to #3 AWG (Stranded Copper);#12 to #8 AWG (Solid);#12 to #3 AWG (Stranded Aluminum) (1)
  • #14 to #8 AWG (Solid);#14 to #3 AWG (Stranded Copper);#12 to #8 AWG (Solid);#12 to #3 AWG (Stranded Aluminum);#12 to #8 AWG (Solid);#12 to #2 AWG (Stranded Aluminum/Copper) (2)
  • #14 to #8 AWG (Solid);#14 to #3 AWG (Stranded Copper, Line/Load);#12 to #8 AWG (Solid);#12 to #3 AWG (Stranded Aluminum, Line/Load);#12 to #8 AWG (Solid);#12 to #2 AWG (Stranded Aluminum/Copper, Ground) (2)
  • Show More...

• Application

  

  • Electric Motor-Driven Air Conditioning and Refrigerating Equipment (2)
  • For 200 AMP Transfer Switches (1)
  • For Converting Overhead To Underground Services, Multi-Circuit Wiring, Inter-Building Wiring On Farms (1)
  • For Poultry Farms, Dairy Farms, Ventilation In Animal Confinement Buildings, Crop Drying And Anywhere An Extended Loss Of Normal Power Service Would Result In Severe Loss, Damage Or Inconvenience (1)
  • Residential (1)
  • Show More...

• Special Features

  

  • All-in-one construction for factory assured terminations Rolled edge door for cord protection Heavy (16 GA) galvanized zinc-coated steel with highest quality electro-deposition finish resists corrosion and fading Welded flange NEMA 3R construction for lasting service in outdoor installations All components are factory wired and assembled, reducing installation time Door has stay-open position for user convenience All terminals accept copper or aluminum wire for added installation flexibility Wide range of (1)
  • Evaporative cooler applications not only require fusing but switching or receptacle functions depending on equipment type and local codes. Two models are offered to meet these varied evaporative cooler applications. (1)
  • G90 galvanized steel with superior electro-deposition paint finish, provides excellent corrosion protection All in one construction for factory assured terminations Rolled edge door for cord protection Cover design allows cords to exist while maintaining the NEMA 3R integrity Wide assortments of concentric knockouts offer flexibility in theinstallation All GFCI Duplexes are listed as weather resistant and tamper resistant as required by 2008 NEC in Article 406.8 and 406.11. Padlockable door to help prevent (1)
  • Heavy duty manual transfer switch provides reliable, trouble-free transfer of power from the normal utility supplied source, to a stand-by generator The double throw mechanism helps prevent dangerous backfeeding of generator power into the utility system Designed to be fully operational and switchable at full rated capacity Quick-make, quick-break switch mechanism All-in-one construction for factory assured terminations Bus bars used to interconnect main and standby switches Knife blade switch contacts pro (1)
  • Heavy galvanized G90 16 GA steel, with highest quality electro-deposition finish, resists corrosion and fading 200 or 125 AMP continuous duty meter socket with meterguides and reinforced jaws for ring and ringless type sockets Utility meter socket compartment barriered from breaker mains for utility power protection Rated NEMA 3R - weather proof equipment All terminals accept copper or aluminum wire for added installation flexibility Doors have padlock provision to prevent unauthorized entry Supplied with (1)
  • Interrupting Capacity 10000 A (1)
  • Metallic, 30A Fusible disconnects. Pullers are removable or reinstallable in the OFF position for user safety during equipment maintenance. Listed for use as service entrance. (1)
  • Metallic, 60A Fusible disconnects. Pullers are removable or reinstallable in the OFF position for user safety during equipment maintenance. Listed for use as service entrance. (1)
  • METER SOCKET–(1) 200A 600V 1P3W G90 N3R 4-TERMINAL SMALL HUB OPNG TRIPLEX GRD TOP/BOT FEED (1)
  • Multiple disconnect devices are offered for heat pump applications that require individual disconnects for the heating and cooling cycles. All pullers are removable or reinstallable in the OFF position for user safety during equipment maintenance. Their UL listing includes the ability to field replace the 60 Ampere puller in the left fuse block with a 30 Ampere puller (FH35-2) for installation flexibility but prohibits the interchangeability of pullers between fuse blocks to insure the proper fuse/puller (1)
  • National Electric Code requires electrical distribution equipment to be rated as “Service Entrance”, wherever electrical power enters a building or other structure. Service entrance products are typically utilized on single-family residences and mobile homes. Midwest Electric offers a broad range of surface mount and pedestal units, factory assembled and wired. Pedestal units come standard with loop feed lugs to reduce installation time and labor expense. Service Entrance equipment is made of heavy, ga (2)
  • Noryl Thermoplastic Enclosure is Corrosion Resistant and Extremely Durable;Giving Long Maintenance-Free Service (2)
  • Pullers are removable or reinstallable in the OFF position for user safety during equipment maintenance Door has padlock provisions to prevent unauthorized access Noryl thermoplastic enclosure is corrosion resistant and extremely durable, giving long maintenance free service Three-piece construction that opens up mounting and wiring areas, reduces installation time Numerous knockouts reduce installation time Straight-in, straight-out wiring saves time and money 265A6036G73 complete block and puller , 265A6 (1)
  • Pullers are removable or reinstallable in the OFF position for user safety during equipment maintenance Door has padlock provisions to prevent unauthorized access Noryl thermoplastic enclosure is corrosion resistant and extremely durable, giving long maintenance free service Three-piece construction that opens up mounting and wiring areas, reduces installation time Numerous knockouts reduce installation time Straight-in, straight-out wiring saves time and money FR65 complete block and block, F682 puller (1)
  • Removable Covers, Embossed Stand-Offs, and Ample Gutter Space for Quick Installation and Wiring;G90 Galvanized Steel or Aluminum Construction for Superior Corrosion Protection;Durable Polyester Powder Coat Finish resists Chipping and Fading;Stainless Steel Latch and Hasp;Lockable Meter, Raceway, and Utility Compartments (1)
  • Terminals accept copper or aluminum wire Factory installed terminal bars Wide range of concentric knockouts Door has stay open position or removes completely Wide range of terminals meet varied application requirements Padlock provisions to prevent unauthorized entry Completely factory assembled Durable, long-lasting construction Heavy zinc coated steel with electro-deposition paint finish Suitable for NEMA 3R and NEMA 1 installations Stationary mounted terminations make circuit tracing much easier Hub pro (1)
  • Show More...

• Weight

  

  • 2.5 lb (1)
  • 3 lb (1)
  • 32 lb (1)
  • Show More...

• Category Description

  

  • Meter Sockets (1)
  • RV Power Pedestals (5)
  • TEMP. POWER PANELS & ACCESSORIES (10)
  • TERMINAL BLOCK ACESSORIES (1)
  • TRANSFER SWITCHES (1)
  • Show More...

• Size

  

  • 16 X 29 (1)
  • 5 X 7 (3)
  • 5 X 9 (1)
  • 6 X 14 (1)
  • Show More...

• Type

  

  • Fused Pull-Out AC Disconnect Switch (2)
  • Neutral Kit (1)
  • Non-Automatic AC Disconnect Switch (1)
  • Non-Fused Pull-Out AC Disconnect Switch (2)
  • Ringless Meter Socket (1)
  • Terminal Box (1)
  • Unmetered Power Outlet (2)
  • Unmetered Transfer Switch (1)
  • Show More...

• Cable Entry

  

  • Knockout Code (F): 1/2, 3/4 IN; Knockout Code (G): 1/2, 3/4, 1 IN; Knockout Code (H): 1/2, 3/4, 1, 1-1/4 IN (1)
  • Knockout Code (F): 1/2, 3/4 IN; Knockout Code (N): 2, 2-1/2, 3 IN (1)
  • Show More...