Narrow By:

• Category: Conduit, Pipe, & Raceways

• Product Type

  

  • 1 1/2 UL40 45 BND STD R (1)
  • 1 1/2 UL40 90 BND STD R (1)
  • 1 1/4 UL40 90 BND STD R (1)
  • 1 Inch R/G Orange W/Tape (1)
  • 1 UL40 45 BND STD R (1)
  • 1 UL40 90 BND STD R (1)
  • 1" PVC Entrance Cap (1)
  • 1-1/2" PVC Entrance Ca (1)
  • 1IN Riser Gard Corr Org 250FT (1)
  • 2 Inch R/G Orange W/Tape (1)
  • 2 PVC TC-40 10'Be (1)
  • 2 SS316 Strut CLMP (1)
  • 2 UL40 45 BND STD R (1)
  • 2 UL40 90 BND STD R (1)
  • 2-1/2" PVC Entrance Cap (1)
  • 3 1/2 UL40 45 BND STD R (1)
  • 3 UL40 90 BND STD R (1)
  • 3" PVC Entrance Cap (1)
  • 3/4"-Multi-Grip Pipe Clamp, Thinwall, Imc, Rigid, ZN PLTD (1)
  • 4 UL40 45 BND STD R (1)
  • 8 X 8 X 4 Junction Box (1)
  • C Cond Body 1" 316 (1)
  • Clamp (1)
  • Entrance Cap (1)
  • Fixed Strut Support (1)
  • Intermediate Metal Conduit (9)
  • Junction Box (1)
  • Nonmetallic Raceway (1)
  • PVC Conduit (15)
  • PVC SCH40 1 X 20 Ul Be (1)
  • PVC SCH40 1-1/2 X 20 Ul Be (1)
  • PVC SCH40 1-1/4 X 20 Ul Be (1)
  • PVC SCH40 2-1/2 X 20 Ul Be (1)
  • PVC SCH40 3/4 X 20 Ul Be (1)
  • PVC SCH40 5 X 20 Ul Be (1)
  • Rigid Conduit Clamp (1)
  • Rigid/Imc Conduit Body (1)
  • Type LL Cond Bdy 4CU 1/2IN PVC 10PK (1)
  • Show More...

• Brand

  

  • Abb Installation Products, Inc (1)
  • Allied Tube & Conduit (6)
  • ARLINGTON (4)
  • Arlington Industries (1)
  • CALBRITE (1)
  • CANTEX,INC (15)
  • Carlon (2)
  • Conduit (10)
  • Eaton (1)
  • nVent CADDY (1)
  • PVC & Accessories (16)
  • Robroy Stainless (1)
  • Thomas&Betts-Abb Ins Prod (3)
  • WIREMOLD (1)
  • Show More...

• Material

  

  • 14 Gauge Low Carbon Steel (1)
  • Flat Rolled Steel (9)
  • Non-Metallic (1)
  • Noryl (1)
  • Polyethylene;Polypropylene;Steel (1)
  • PVC (21)
  • Stainless Steel - 316 (1)
  • Show More...

• Trade Size

  

  • 1 (4)
  • 1 1/2 (2)
  • 1 1/4 (1)
  • 1 in (1)
  • 1 in;27 mm (1)
  • 1 INCH (1)
  • 1/2 in (1)
  • 1/2 in;16 mm (1)
  • 1/2 INCH (1)
  • 1-1/2 (1)
  • 1-1/2 in (1)
  • 1-1/2 in;41 mm (1)
  • 1-1/2 INCH (1)
  • 1-1/4 (1)
  • 1-1/4 in (1)
  • 1-1/4 in;35 mm (1)
  • 2 (4)
  • 2 in (4)
  • 2 in;53 mm (1)
  • 2 Inches (1)
  • 2-1/2 (1)
  • 2-1/2 IN (1)
  • 2-1/2 in;63 mm (1)
  • 3 (1)
  • 3 1/2 (1)
  • 3 in (2)
  • 3 in;78 mm (1)
  • 3/4 (1)
  • 3/4 in (1)
  • 3/4 in;21 mm (1)
  • 3-1/2 in (1)
  • 4 (1)
  • 4 in (2)
  • 4 in;103 mm (1)
  • 5 in (1)
  • 6 in (1)
  • 8 x 8 x 4 (1)
  • Show More...

• Length

  

  • 10 ft (12)
  • 10 ft. (1)
  • 10 in;12-1/2 in (1)
  • 11.62 in;295.1 mm (1)
  • 1200 (1)
  • 20 ft (3)
  • 240 (5)
  • 3.438 (1)
  • 3000 (1)
  • 4.07 (1)
  • 4.18 in (1)
  • 4-5/16 (1)
  • 5.069 (1)
  • 50 ft (1)
  • 7.62 (1)
  • 7.79 in (1)
  • 9 ft 10-1/2 in (2)
  • 9 ft 10-1/4 in (1)
  • 9 ft 11 in (4)
  • 9 ft 11-1/4 in (2)
  • 9.07 (1)
  • Show More...

• Finish

  

  • #4 Polished Finish (1)
  • Electro Galvanized (9)
  • Electro-polished (1)
  • Gray (1)
  • Hot Dip Galvanized (1)
  • Pre-Galvanized (1)
  • Smooth Texture Natural Base;Matte Texture Ivory (1)
  • Show More...

• Color

  

  • Gray (29)
  • Green (Cap) (2)
  • Ivory (1)
  • Orange (2)
  • Orange (Cap) (4)
  • Polished Silver (1)
  • Yellow (Cap) (3)
  • Show More...

• Width

  

  • 0.76 in (1)
  • 1.05 (1)
  • 1.315 (2)
  • 1.66 (2)
  • 1.9 (2)
  • 11.62 in;295.1 mm (1)
  • 1-5/16 in (1)
  • 2.375 (2)
  • 2.545 (1)
  • 2.875 (2)
  • 3.5 (2)
  • 3.618 (1)
  • 3.929 in (1)
  • 4 (1)
  • 4.5 (1)
  • 5.563 (1)
  • 5.885 (1)
  • 6.625 (1)
  • 7.971 (1)
  • 8 (1)
  • 8 in (1)
  • Show More...

• Height

  

  • 1.05 (1)
  • 1.315 (2)
  • 1.66 (2)
  • 1.9 (2)
  • 12.665 (1)
  • 2.375 (2)
  • 2.49 in (1)
  • 2.875 (2)
  • 3.5 (2)
  • 3.575 (1)
  • 4 (1)
  • 4.5 (1)
  • 4.8 in (1)
  • 5.563 (1)
  • 5.9 (1)
  • 6.00 in;152.4 mm (1)
  • 6.625 (1)
  • 6.66 in (1)
  • 7/16 in (1)
  • 8 (1)
  • 9.79 (1)
  • Show More...

• Outside Diameter

  

  • 1.05 (1)
  • 1.315 (1)
  • 1.32 (1)
  • 1.66 (2)
  • 1.9 (2)
  • 2.375 (2)
  • 2.375 in. (1)
  • 2.38 (1)
  • 2.875 (2)
  • 3.5 (2)
  • 4 (1)
  • 4.5 (1)
  • 5.563 (1)
  • 6.625 (1)
  • Show More...

• Inside Diameter

  

  • 0.98 (1)
  • 2 (1)
  • 2.021 in. (1)
  • Show More...

• Hub Size

  

  • 1/2 (1)
  • 2 (1)
  • L(3.929) x W(6.66) x H(7.79) (1)
  • L(9.07) x W(7.971) x H(12.665) (1)
  • Show More...

• For Use With

  

  • Direct Sunlight (1)
  • Pipe, Conduit, Duct and Cable Tray Around Obstructions (1)
  • Rigid Conduit;IMC Conduit;EMT Conduit;Rigid PVC Conduit (1)
  • Show More...

• Application

  

  • Carlon Junction Box Offers All the Corrosion Resistance and Physical Properties Needed For Direct Burial (1)
  • Commercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - Other (1)
  • Datacom and Low Voltage;Electrical Fixing And Fastening;HVAC;Plumbing And Refrigeration;Rooftop (1)
  • For use with Schedule 40 and 80 Conduit (1)
  • Grounded Electrical Wiring System (9)
  • JUNCTION BOX (1)
  • Low Voltage and Power;Classroom;Office;Hotel (1)
  • New work and Retrofit (5)
  • Riser-Gard is suitable for use in vertical runs in a shaft or between floors, as well as areas other than the plenum (2)
  • Underground or Aboveground (15)
  • UV inhibited for use in direct sunlight (1)
  • Show More...

• Special Features

  

  • Combo style - Includes adapter and sleeves (2)
  • Corrosion Resistant:Rust Resistant:Sunlight Resistant;Rated For 90° Cable;Rigid Nonmetallic PVC Schedule 40;Belled End (15)
  • Electric Resistant;Corrosion Resistant (9)
  • Includes adapter sleeve for EMT (1)
  • Includes Combination Recess Hex Head Machine Screw and Square Nut, Pipe Range 0.917 To 1.081 In OD, Load Capacity 400 Lb Vertical, 50 Lb Transverse (1)
  • Lightweight and Easy to Handle (1)
  • Neoprene Gasket (1)
  • Non-Metallic Clamps Offer the Same Chemical Resistance as Carlon Non-Metallic Conduits for a Complete, Corrosion Resistant System (1)
  • Provides Superior Support for Pipe, Conduit, Duct, Cable Tray and Equipment;Foam Bottom Offers Low Abrasion Interface for Better Roof Membrane Protection;Compatible with Roof Surfaces Including Single Ply, Bituminous, Metal and Spray Foam;Provides Superior Load Distribution, Even with Varying Rooftop Surfaces;Ready to Use Out of the Box, Saving Installation Time and Labor Multiple Sizes and Load Ratings Offer the Ability to Tailor The Solution to the Application;Easy to Transport to the Roof;Hot-Dip Galvan (1)
  • Textured lids (1)
  • The first non-metallic junction box UL Listed with a NEMA 6P rating per Section 314, exception of the National Electrical Code (1)
  • UL Listed and is available with tape pre-installed (2)
  • Show More...

• Size

  

  • 1 in. x 45-Degree Plain End Schedule 40 Standard Radius Elbow (1)
  • 1 in. x 90-Degree Plain End Schedule 40 Standard Radius Elbow (1)
  • 1/2 (1)
  • 1-1/2 in. x 45-Degree Plain End Schedule 40 Standard Radius Elbow (1)
  • 1-1/2 in. x 90-Degree Plain End Schedule 40 Standard Radius Elbow (1)
  • 1-1/4 in. x 90-Degree Plain End Schedule 40 Standard Radius Elbow (1)
  • 2 (1)
  • 2 in. x 10 ft. Schedule 40 PVC Conduit (1)
  • 2 in. x 45-Degree Plain End Schedule 40 Standard Radius Elbow (1)
  • 2 in. x 90-Degree Plain End Schedule 40 Standard Radius Elbow (1)
  • 3 in. x 90-Degree Plain End Schedule 40 Standard Radius Elbow (1)
  • 3/4 in (1)
  • 3-1/2 in. x 45-Degree Plain End Schedule 40 Standard Radius Elbow (1)
  • 4 in. x 45-Degree Plain End Schedule 40 Standard Radius Elbow (1)
  • 8 in. x 8 in. x 4 in. Junction Box;Non-Applicable (1)
  • Show More...

• Package Quantity

  

  • 10 CT (6)
  • 10 PK (1)
  • 100 CT (1)
  • 100 PK;1 CT (1)
  • 1140 FT/PK (1)
  • 1400 FT/PK (1)
  • 1760 FT/PK (1)
  • 2 PK (1)
  • 2250 FT/PK (1)
  • 25 CT (1)
  • 260 FT/PK (1)
  • 2800 FT/PK (1)
  • 3300 FT/PK (1)
  • 3600 FT/PK (1)
  • 380 FT/PK (1)
  • 4400 FT/PK (1)
  • 5 PK (1)
  • 50 CT (2)
  • 570 FT/PK (1)
  • 6000 FT/PK (1)
  • 630 FT/PK (1)
  • 880 FT/PK (1)
  • 930 FT/PK (1)
  • Show More...

• Wall Thickness

  

  • .154 in. (1)
  • 0.070 to 0.085 in;1.78 to 2.16 mm (1)
  • 0.075 to 0.090 in;1.91 to 2.29 mm (1)
  • 0.085 to 0.100 in;2.16 to 2.54 mm (2)
  • 0.090 to 0.105 in;2.29 to 2.67 mm (1)
  • 0.095 to 0.110 in;2.41 to 2.79 mm (1)
  • 0.109 in (1)
  • 0.11 (1)
  • 0.113 (1)
  • 0.113 in (1)
  • 0.133 (1)
  • 0.133 in (1)
  • 0.14 (1)
  • 0.140 in (1)
  • 0.140 to 0.160 in;3.56 to 4.06 mm (3)
  • 0.145 (1)
  • 0.145 in (1)
  • 0.154 in (2)
  • 0.203 (1)
  • 0.203 in (1)
  • 0.216 in (2)
  • 0.226 in (1)
  • 0.237 in (2)
  • 0.258 in (1)
  • 0.280 in (1)
  • Show More...

• Weight

  

  • 0.153 lb (1)
  • 0.162 lb (1)
  • 0.216 lb (1)
  • 0.2196 (1)
  • 0.316 (1)
  • 0.32 lb (1)
  • 0.3261 (1)
  • 0.434 lb (1)
  • 0.4414 (1)
  • 0.52 lb (1)
  • 0.5279 (1)
  • 0.6 lb/ft (1)
  • 0.6989 lb (2)
  • 0.82 lb/ft (1)
  • 1.0 lb/EA (1)
  • 1.108 lb (1)
  • 1.1577 (1)
  • 1.1599 lb/ft (1)
  • 1.45 lb (1)
  • 1.5 lb/ft (1)
  • 1.6091 (1)
  • 1.744 lb (1)
  • 1.82 lb/ft (1)
  • 2 lb (1)
  • 2.0669 lb (1)
  • 2.292 lb (1)
  • 2.4199 lb/ft (1)
  • 2.68 (1)
  • 2.8009 lb (1)
  • 3.6359 lb (1)
  • 4.25 lb/EA (1)
  • 4.2799 lb/ft (1)
  • 5.26 lb/ft (1)
  • 6.25 lb/EA (1)
  • 6.82 lb/ft (1)
  • Show More...

• Minimum Qty

  

  • 10 (30)
  • 100 (1)
  • 20 (11)
  • 5 (1)
  • 500 (1)
  • Show More...

• Category Description

  

  • Conduit & Raceways (1)
  • Conduit & Raceways - Pvc Conduit, Fittings, & Boxes (28)
  • IMC Conduit (10)
  • MISC FITTINGS (2)
  • Panduit & Wiremold Metallic & Non-Metallic Raceways (1)
  • PVC & ENT (5)
  • PVC BOXES (2)
  • Pvc Conduit, Ftgs, & Bxs-Pvc Schedule 80 Elbows (1)
  • PVC Conduit, Pipe, Fittings, & Boxes (1)
  • PVC CONDULETS (1)
  • PVC ELBOWS (11)
  • PVC Schedule 40 Conduit (12)
  • PVC STRAPS (2)
  • SERVICE ENTRANCE FITTINGS: Weatherheads & Grounding Fittings & Ground Rods (5)
  • Stainless Steel EMT Conduit (1)
  • STRUT STRAPS (1)
  • Wire/Plug Strips, Surf Raceways, Power Pole, Walkerduct, & Plugmolds (1)
  • Show More...

• Type

  

  • 1-1/2 in. x 45-Degree Plain End Schedule 40 Standard Radius Elbow (1)
  • 1-1/2 in. x 90-Degree Plain End Schedule 40 Standard Radius Elbow (1)
  • 1-1/4 in. x 90-Degree Plain End Schedule 40 Standard Radius Elbow (1)
  • 2 in. x 10 ft. Schedule 40 PVC Conduit (1)
  • 2 in. x 45-Degree Plain End Schedule 40 Standard Radius Elbow (1)
  • 2 in. x 90-Degree Plain End Schedule 40 Standard Radius Elbow (1)
  • 3 in. x 90-Degree Plain End Schedule 40 Standard Radius Elbow (1)
  • 3-1/2 in. x 45-Degree Plain End Schedule 40 Standard Radius Elbow (1)
  • 4 in. x 45-Degree Plain End Schedule 40 Standard Radius Elbow (1)
  • 8 in. x 8 in. x 4 in. Junction Box;Molded Junction Box (1)
  • Conduit Body Assemblies (1)
  • Conduit Clamps & Support Straps (1)
  • Multi-grip and offset pipe clamp (1)
  • nVent CADDY Pyramid ST Strut-Based Supports (1)
  • Plain End Schedule 40 Standard Radius Elbow (2)
  • Push-In Connector (5)
  • PVC - Sch 40/80 (17)
  • Raceway Base, Raceway Cover (1)
  • Rectangular with Cover (1)
  • RIGID (1)
  • Rigid Non-Metallic Conduit Junction Boxes (1)
  • Riser-Gard Flexible Raceway (2)
  • Type LL Conduit Body (1)
  • Show More...

• Diameter

  

  • 1" (1)
  • 1/2" (1)
  • 1-1/4" (1)
  • 2" (1)
  • 2-1/2" (1)
  • 3" (1)
  • 3/4" (1)
  • 3-1/2" (1)
  • 4" (1)
  • 6" (1)
  • Show More...