Narrow By:

• Brand:Littelfuse

• Product Type

  

  • 10250 STD Duty RND&Sel SW (3)
  • 12-Ton (3)
  • 16IN Tongue and Groove Plier (2)
  • 30MM Cont BLK 2NO Amber (2)
  • 3M™ Scotchcode™ Wire Marker Tape Refill Roll (10)
  • Aluminum Building Wire (68)
  • Aluminum Conductor (6)
  • Buss Fuse Puller (1)
  • Buss Fuseholder (5)
  • Buss Midget Fuse (18)
  • Cable (8)
  • Cable Mold (1)
  • Circuit Breaker (6)
  • Class CC Fast Acting Fuse (4)
  • Class CC Time Delay (20)
  • Class CC Time Delay Rejection Fuse (2)
  • Compression Connector (9)
  • Compression Coupling (2)
  • Compression Lug (3)
  • Conductor Lug (8)
  • Conduit Body (6)
  • Conduit Hanger With Bolt (1)
  • Conduit Outlet Body Cover (3)
  • Connector (4)
  • Coupling (3)
  • Electrical Box (6)
  • Emt Compression Connector (22)
  • Emt Compression Coupling (28)
  • EMT Concrete Tight DC Connector (6)
  • Emt Conduit Connector (1)
  • Emt Set Screw Connector (5)
  • Emt Set Screw Coupling (6)
  • EMT SS Diecast Connector (3)
  • Enclosure (3)
  • Enclosure Ventilator (1)
  • Fan Box (2)
  • Fan Support Box (1)
  • Flexible Conduit (1)
  • Floor Box (1)
  • Floor Box Assembly (4)
  • Floor Box Cover (1)
  • Fluorescent Ceiling Mount Light Fixture (2)
  • Fuse (27)
  • Fusetron Dual Element Fuse Class RK5 (21)
  • Fusetron Dual-Element (6)
  • Fusetron Dual-Element Class RK5 (22)
  • Fusetron Fuse (24)
  • Groove Joint Plier (5)
  • Ground Connector (2)
  • Halogen Lamp (1)
  • Handy Box (1)
  • Handy Box Cover (5)
  • Heat Shrink (1)
  • Illuminated Pushbutton (1)
  • In-Line Fuse Holder (1)
  • LED Combination Exit/Emergency Light (2)
  • Led Remote, 1 HD (2)
  • Led Remote, 2 HD (2)
  • Legand Plate (5)
  • Legend Plate (5)
  • Lens (6)
  • Light Bulb (17)
  • Limitron Fast Acting Fuse (10)
  • Linear Fluorescent Lamp (1)
  • Liquid Tight 90° Connector (2)
  • Liquid Tight 90°Connector (2)
  • Liquid Tight Connector (4)
  • Liquidtight Flexible Metallic Conduit (1)
  • Low-Peak Time-Delay 300K (2)
  • Lug (1)
  • Mechanical (68)
  • Mechanical Grounding Connector (1)
  • Molds (2)
  • Multigang Switch Box (1)
  • Non Illuminated Selector Switch (2)
  • Non-Metallic Junction Box (1)
  • Non-Metallic Round Outlet Box (2)
  • Occupancy Sensor (1)
  • Octagon Box (6)
  • Operator Assembly (3)
  • Outlet Box (6)
  • Oxide Inhibitor (1)
  • Perfect Prox Photoelectric Sensor (2)
  • Photoelectric Sensor (10)
  • Pin Terminal (2)
  • Plastic Bushing (2)
  • PLG PWRMT 150A 3W4P .875-1.906 Rev Conts (2)
  • Power Distribution Block (1)
  • Push Button Station (3)
  • Push/Pull Operator (2)
  • Push-Pull Pushbutton Switch (2)
  • Raintight Compression Coupling (4)
  • Raintight Connector (2)
  • Ratcheting Cable Cutter (1)
  • Rigid Conduit (10)
  • Ring Tongue Compression Terminal (5)
  • Rotateable Optic Emergency Light (2)
  • Round Box (1)
  • Round Cover (1)
  • RUN/TAP (8)
  • Select Switch (2)
  • Selector Switch (5)
  • Selector Switch Assembly (3)
  • Sensor (1)
  • Service Entrance Cable (7)
  • Set Screw EMT Connector (3)
  • Single Gang Box (1)
  • Splice (3)
  • Splice Connector (2)
  • SPLICE REDUCER (6)
  • Split Bolt Connector (3)
  • Square Box (6)
  • Stamped Cover (3)
  • Switch Box (2)
  • Switch Box Partition (2)
  • Switch Operator (2)
  • Switch/Receptacle Box (2)
  • Tape Light (7)
  • Terminal (125)
  • Time Delay Fusetron Fuse (24)
  • Type MC Cable (8)
  • Undercabinet (5)
  • Underground Distribution Cable (7)
  • Weatherproof Receptacle Cover (1)
  • Weld Metal (5)
  • Show More...

• Brand

  

  • 3M Electrical Products (11)
  • ALLIED MOULDED (1)
  • Allied Moulded Products (34)
  • Allied Tube & Conduit (10)
  • Allied Tube and Conduit (12)
  • Aluminum (500)
  • American Fittings Corp (86)
  • American Lighting (17)
  • American Lighting, Inc. (7)
  • Amfico (105)
  • Anaconda (3)
  • Anamet Electrical Inc (1)
  • Appleton (97)
  • Appleton/Oz Gedney (3)
  • APPOZGCOMM (12)
  • Brady Worldwide, Inc. (1)
  • Brady® (48)
  • Bridgeport (82)
  • Bridgeport Fittings (43)
  • BROAN (3)
  • BURNDY (250)
  • Burndy LLC (20)
  • Burndy-US, a Hubbell affiliate (2)
  • Bussmann Fuses (11)
  • Cablofil (6)
  • Cementex (4)
  • CHANNELLOCK (14)
  • Channellock , Inc. (1)
  • COMPASS (2)
  • Cooper Bussmann North America (13)
  • Crouse-Hinds (3)
  • DUAL-LITE (1)
  • Eaton (167)
  • Eaton Bussmann series (96)
  • Eaton Corp (15)
  • EATON CUTLER-HAMMER (173)
  • Eaton Cutler-Hammers (1)
  • Edison Fuses (3)
  • Legrand-Wattstopper (2)
  • Mersen (4)
  • Nsi Industries (6)
  • nVent ERICO (9)
  • PANDUIT (1)
  • PLASTIBOND (4)
  • Powr-Gard(R) (5)
  • Red Dot (3)
  • Republic Con-Nucor Tube (5)
  • sensorswitch (2)
  • Southwire (2)
  • SURE-LITES (5)
  • Viton(R) (6)
  • WATTSTOPPER (1)
  • WESTINGHOUSE (1)
  • Westinghouse Lighting (18)
  • Show More...

• Contact Configuration

  

  • 1 NC (2)
  • 1 NO-1 NC (18)
  • 1NO (1)
  • 1NO (standard) (1)
  • 1NO-1NC (1)
  • 2 NO (standard) (2)
  • 2NO (1)
  • 2NO-2NC (1)
  • DPDT (2)
  • Show More...

• For Use With

  

  • Aircraft;Industrials;Hospitals;Electric Utilities;Marine;Computers;Other Equipment (4)
  • All Aluminum Applications (2)
  • Aluminum or Steel Electrical Metallic Tubing (4)
  • Aluminum to Aluminum Connection;Aluminum to Copper Connection;Copper to Copper Connection (8)
  • Battery Ignition System (4)
  • Circuit Wiring (15)
  • Connecting EMT to Box or Enclosure (2)
  • Direct Burial Applications in Earth or Concrete (2)
  • Electric Metallic Tubing (5)
  • EMT Conduit (27)
  • EMT Conduit;Boxes and Enclosures (5)
  • EMT Raceways to Boxes and Enclosures (2)
  • EMT to Box or Enclosure (4)
  • For 4 in x 2-1/8 in Boxes (4)
  • For Parallel or 90°Copper Cable Connection to Rod;Pipe with the Same Connector (2)
  • Greater than 2000 Volts Consult Cable (3)
  • Join EMT to Box or Enclosure (2)
  • Liquidtight Conduit (6)
  • Locknut;Box or Connector (2)
  • Non-Metallic Sheathed Cable (8)
  • Pushbutton Control Station (2)
  • Push-Pull (5)
  • Rigid Conduit (2)
  • Rigid Steel;Rigid Aluminum;IMC Conduit (3)
  • Secure Emt to Box or Enclosure (3)
  • Secure Steel EMT to Box or Enclosure;Concrete-Tight when Taped (3)
  • Selector Switch (2)
  • Steel and Aluminum EMT (5)
  • Steel and Aluminum EMT;Steel and Aluminum Rigid Conduit (2)
  • To Join EMT to Box or Enclosure (18)
  • Two Lengths of EMT Conduit;Rigid and IMC Conduit (3)
  • Type ECC Unit Enclosures (6)
  • Used to Join Steel Emt to Box or Enclosure;Concrete-Tight 1/2 in Thru 2 in Suitable for use with Steel or Aluminum Emt (6)
  • Used With 10250T Series;Pushbutton Operators and Indicating Lights (2)
  • Used With 10250T Series;Selector Switch and Roto-Push Operators (2)
  • Show More...

• Connection Type

  

  • Blade End x Blade End (9)
  • Compression (6)
  • Ferrule End x Ferrule End (36)
  • M12 x 1 Plug-In Connection (9)
  • Rigid (2)
  • Set Screw (7)
  • Threaded (8)
  • Show More...

• Response Time

  

  • 10 s @ 500% (24)
  • 10 S at 500% (47)
  • 12 s @ 200% (6)
  • 12 S at 200% (9)
  • 2 min at 150%, 1 sec at 250% (2)
  • 4 sec at 500% (2)
  • 60 min @ 135%;2 min @ 200 % (3)
  • Interrupt Rating 200 Amp at 250 Vac, 10000 Amp at 125 Vac/Vdc, Material Ceramic Tube, Nickel Plated Brass Endcap (10)
  • Show More...

• Current Rating

  

  • 1 A (4)
  • 10 A (5)
  • 100 A (8)
  • 115 A (3)
  • 115 A @ 60 °C;135 A @ 75 °C;150 A @ 90 °C (2)
  • 125 A (2)
  • 130 AMPERE (60 DEG C), 155 AMPERE (75 DEG C), 175 AMPERE (90 DEG C) (1)
  • 135 A (5)
  • 15 A (5)
  • 150 A (8)
  • 150 A @ 60 °C;180 A @ 75 °C;205 A @ 90 °C (2)
  • 165 A;120 A (2)
  • 170 A @ 60 °C;205 A @ 75 °C;230 A @ 90 °C (2)
  • 175 A (2)
  • 195 AMPERE (60 DEG C), 230 AMPERE (75 DEG C), 260 AMPERE (90 DEG C) (2)
  • 2 A (3)
  • 20 A (3)
  • 20 AMPERE (1)
  • 200 A (7)
  • 200 AMPERE DIRECT BURIAL, 150 AMPERE IN DUCT (1)
  • 205 A (9)
  • 225 AMPERE (60 DEG C), 270 AMPERE (75 DEG C), 305 AMPERE (90 DEG C) (1)
  • 230 A (9)
  • 255 A (2)
  • 260 AMPERE (60 DEG C), 310 AMPERE (75 DEG C), 350 AMPERE (90 DEG C) (1)
  • 3 A (5)
  • 30 A (5)
  • 305 A (5)
  • 315 AMPERE DIRECT BURIAL, 240 AMPERE IN DUCT (1)
  • 320 AMPERE (60 DEG C), 385 AMPERE (75 DEG C), 435 AMPERE (90 DEG C) (2)
  • 350 A (8)
  • 385 A (4)
  • 400 A (2)
  • 435 A (5)
  • 5 A (3)
  • 60 A (6)
  • 75 A (4)
  • 85 AMPERE (60 DEG C), 100 AMPERE (75 DEG C), 115 AMPERE (90 DEG C) (1)
  • Show More...

• Voltage Rating

  

  • 10 to 30 V dc (4)
  • 115 V (1)
  • 120 V ac;277 V ac (3)
  • 120/240 V (4)
  • 120/240 V ac (5)
  • 120/277 (2)
  • 120/277 VAC (2)
  • 120/277@50/60Hz (2)
  • 125 (3)
  • 125 VAC (1)
  • 20 to 264 V ac;15 to 30 V dc (6)
  • 240 V - 240 V (4)
  • 250 (7)
  • 250 V (2)
  • 250 V ac (4)
  • 250 VAC (8)
  • 250 VAC, 125 VDC (30)
  • 300 V (1)
  • 32 V (2)
  • 32 VAC (2)
  • 35 (102)
  • 35 kV (2)
  • 50 Vac/dc (2)
  • 500 V ac (6)
  • 500 VAC (9)
  • 600 (6)
  • 600 V (120)
  • 600 V ac (9)
  • 600 V ac;300 V dc (24)
  • 600 V ac;500 V dc (3)
  • 600 VAC (9)
  • 600 VAC AT 50 TO 400 HZ, 250 VDC (2)
  • 600 Vac, 125 Vdc (2)
  • 600 Vac, 300 Vdc (24)
  • 600 VAC, 50 to 400 Hz, 250 VDC (4)
  • 600V (3)
  • Show More...

• Mounting Type

  

  • 4 in Deep J-Box, 1/2 in Knockout (2)
  • Angled Mid Nail (4)
  • Screw (3)
  • Screw Mount (12)
  • Surface Mount (6)
  • Threaded (2)
  • Wall Mount;Ceiling Mount (2)
  • Show More...

• Material

  

  • 2 Mil Red Urethane Coated Interior/40 Mil Gray PVC Coated Exterior Ferrous Metal (Body), Stainless Steel (Screw) (3)
  • Aluminum (44)
  • Beige/Tan Fiberglass Reinforced Polyester BMC (2)
  • Brass (3)
  • Bronze Alloy, Leaded (3)
  • Bronze, Leaded, Commercial (7)
  • Cast Aluminum (4)
  • CHANNELLOCK® uses high-carbon C1080 steel for superior performance on the job and electronic coating for ultimate rust prevention (12)
  • Copper (143)
  • COPPER ALLOY (28)
  • Copper Alloy, Cast (5)
  • Die Cast (Enclosure) (3)
  • Die-Cast Zinc (9)
  • Fiber (Tube);Brass (End Cap) (6)
  • Fiberglass Reinforced Polyester BMC (2)
  • Glass (Body);Brass( End Cap) (3)
  • Heat-shrink Polyolefin (9)
  • HIGH IMPACT STRENGTH COPPER FREE ALUMINUM (2)
  • Injection Molded Black Polycarbonate (Box), Nickel Plated Cast Brass (Cover), Closed Cell Rubber (Gasket), Nitrile (O-Ring), Plated Carbon Steel (Fastener), Galvanized Steel (Dust Plate), Steel (Wing Bracket) (2)
  • Malleable Iron (2)
  • Melamine (6)
  • Melamine (Tube);Brass (Cap) (2)
  • Melamine Tube (30)
  • Melamine Tube;Nickel-plated bronze endcap (10)
  • Molded Fiberglass Reinforced Polyester (2)
  • MOLDED FIBERGLASS REINFORCED THERMOSET POLYESTER (5)
  • Molded Fiberglass Reinforced Thermoset Polyester;Plated Carbon Steel (Nail);PVC (Speed Clamp) (2)
  • Nickel-plated bronze endcap (18)
  • Noryl (2)
  • Nylon Cloth (3)
  • Plastic (5)
  • Plastic (Actuator) (6)
  • Plastic (Bus) (5)
  • Plastic (Cartridge) (4)
  • Polycarbonate (3)
  • Polyester (6)
  • Polyurethane (10)
  • PVC (3)
  • Screw Machined Zinc Plated Steel (4)
  • Self-Laminating Vinyl (4)
  • Stainless Steel (4)
  • Steel (69)
  • Thermoplastic (6)
  • Vinyl (6)
  • Zinc Die Cast (22)
  • Zinc Die Cast (Bus) (2)
  • Zinc Electroplated Steel (4)
  • ZINC PLATED STEEL (2)
  • Show More...

• Wire Size

  

  • #2/0 AWG to 300 kcmil (6)
  • 0.157 in to 0.319 in (2)
  • 0.187 in Dia x 1 in W (2)
  • 0.187 in Dia x 7 ft L (2)
  • Show More...

• Terminal Type

  

  • Blade (9)
  • Compression (4)
  • Ferrule (18)
  • Ring Tongue (4)
  • Screw (10)
  • Split (3)
  • Show More...

• Application

  

  • Act as Pull Outlets for Conductors being Installed;Provide Openings for Making Splices and Taps in Conductors;Connect Conduit Sections;Provide Taps for Branch Conduit Runs;Make 90° Bends in Conduit Runs;Provide for Access to Conductors for Maintenance and Future System Changes (2)
  • Asset Tracking;Barcode Labeling;Circuit Board Labeling;Component and Equipment Labeling;Data and Telecommunications Labeling;General Identification;Inventory and Inspection Labeling (2)
  • Asset Tracking;Component and Equipment Labeling;Data and Telecommunications Labeling;Electrical Labeling;Facility Identification;General Identification;Inventory and Inspection Labeling;Laboratory Labeling;Wire and Cable Labeling (2)
  • Automation and Logic Control Equipment (5)
  • Branch Circuits;Line Protection;Small Control Transformers;Industrial Control (6)
  • Bridgeport Fittings Mighty-Seal® product line is designed to provide quick and easy raintight connection to EMT raceways. Patented (2)
  • Bridgeport now offers a full line of EMT to FMC/Greenfield Transition Couplings. You no longer need to assemble multiple fittings, or mount a box, to transition between raceways. These couplings provide dimensional flexibility for a raceway system when dropping in to switchgear and transitioning into transformers. Patented (3)
  • Bridgeport now offers a full line of EMT/Rigid to FMC/Greenfield Transition Couplings. You no longer need to assemble multiple fittings, or mount a box, to transition between raceways. These couplings provide dimensional flexibility for a raceway system when dropping in to switchgear and transitioning into transformers. Patented (2)
  • Cable Management (2)
  • Clear Insulated Multiple Tap Connectors (2)
  • Combination Starters;Motor Control Centers;Machinery Disconnects;Power Panelboards (24)
  • Commercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - Other (9)
  • Commercial / Institutional Buildings / Structures - Power Distribution and Controls (8)
  • Commercial;Industrial;Dry Location (2)
  • Component and Equipment Labeling;Data and Telecommunications Labeling;Electrical Labeling;General Identification;Wire and Cable Labeling (2)
  • Component and Equipment Labeling;Electrical Labeling;Facility Identification;Floor Marking;Lean and 5S Labeling;Pipe and Valve Marking;Warehouse Marking (6)
  • Compression style connector with internal sealing ring and knockout gasket to create a raintight seal when connecting EMT to box or enclosure. Patented (2)
  • Compression style coupling used to join two lengths of EMT. Internal sealing rings create a raintight seal. Patented (4)
  • Compression type connectors used to join EMT to box or enclosure. Concrete Tight. Made in the USA (2)
  • Compression type connectors used to join EMT to box or enclosure. Concrete Tight. Made in the USA (3)
  • Compression type steel couplings used to join two lenghts of EMT. Concrete Tight (2)
  • Compression type steel couplings used to join two lenghts of EMT. Concrete Tight (2)
  • CONCEALED AND EXPOSED LOCATION, DIRECT BURIAL, EQUIPMENT GROUNDING (1)
  • Concrete-Tight When Taped. Plastic Insulator Rated 105 Degree C (2)
  • Conduit or Recognized Raceways for service and Feeder wiring and Branch Circuit Wiring (14)
  • Control circuits Lighting General loads Branch circuit protection (2)
  • Control transformers Solenoids Inductive loads Lighting, heating & general-purpose loads (2)
  • CRIMPING (4)
  • Damp Locations;Wet Locations (15)
  • Data and Telecommunications Labeling;Electrical Labeling;General Identification;Lean and 5S Labeling;Warehouse Marking;Wire and Cable Labeling (2)
  • Data and Telecommunications Labeling;Electrical Labeling;Wire and Cable Labeling (3)
  • Elec Assemblies, Panels & EOEM - Electrical Assemblies and EOEMs - Other (10)
  • Elec Assemblies, Panels & EOEM - Electrical Assemblies, Panels and EOEMs (65)
  • Elec Assemblies, Panels & EOEM - Electrical Assemblies, Panels and EOEMsElec Assemblies, Panels & EOEM - Electrical Assemblies and EOEMs - Other (5)
  • Elec Assemblies, Panels & EOEM - Electrical Assemblies, Panels and EOEMsStationary Machinery and Equipment Outside Factory - Stationary Machinery and Equipment Outside Factory - Other (10)
  • Electrical Labeling;Wire and Cable Labeling (8)
  • Electronic Circuits (14)
  • EMT Raceway;Wet Locations (7)
  • For Accommodating A Broad Range Of 600 Volt Cables (3)
  • For All Combinations Of Copper, Aluminum, ACSR, AAAC, 5005, And Steel (2)
  • For Aluminum And Copper Conductors (11)
  • For Box To Box Connection Of Knockouts (2)
  • For Commercial And Light Duty Industrial Control And Power Circuit Applications (2)
  • For Connecting A Small To Medium Range Copper Ground Conductor To Water Pipe As Well As Structural And Reinforcing Rod Shapes (2)
  • For Connecting Copper Ground Conductor to Fence Posts, Water Pipe, Structural and Reinforcing Rod Shapes (2)
  • For Copper Cable To Bar, Direct Burial Cable (7)
  • For Direct Burial Applications And Used To Ground One Or Two Cables To Steel Structures, Fence Posts, Transformers, Also Used To Tap One Or Two Cables From Bus Bar (3)
  • For Direct Burial Applications In Concrete Or Earth And For Used With Aluminum Or Galvanized Steel Cable Tray (2)
  • For Direct Burial Applications In Earth Or Concrete, Copper (3)
  • For Direct Burial Cables (4)
  • For FM7 Unilet Conduit Outlet Bodies (16)
  • For High Vibration Applications Encountered In Aircraft And Aboard Ships As Well As Motor Lead Applications In Hospitals, Industrials And Generating Plants (4)
  • For Indoor Use Only (2)
  • For Indoor Use Only, Copper Or Stranded Aluminum (5)
  • For Joining A Range Of Cable To Copper Clad, Galvanized Steel, And Stainless Steel Ground Rods, Direct Burial Applications In Earth And Concrete (2)
  • For Joining A Range Of Cable, Parallel Or At Right Angles To Rod Or Tube Fence Posts, Direct Burial Applications (2)
  • For Joining A Range Of Cable, Parallel Or At Right Angles To Rod Or Tube, Direct Burial Cable, Fence Post (22)
  • For Joining A Range Of Two Parallel Copper Cables To Rod Or Pipe And Burial In Ground Or Concrete (2)
  • For Joining A Wide Range Of Copper Cable To Equipment Pads Or Terminal Blocks (3)
  • For Joining A Wide Range Of Two Parallel Copper Cables, Direct Burial In Concrete Or Ground (3)
  • For quickly connecting or disconnecting a terminal (3)
  • For Use With Copper And Aluminum Conductors (5)
  • For Use With Rigid Steel, Rigid Aluminum Conduit And IMC (7)
  • For Used To Ground One Or Two Copper Cables To Steel Structures, Fence Posts, Transformers, Tap One Or Two Cables From Bus Bar And Direct Burial (9)
  • For Very Demanding High Vibration Applications Encountered In Aircraft And Aboard Ships As Well As Motor Lead Applications In Hospitals, Industrials And Generating Plants (2)
  • For Welding Copper To Copper, Copper To Steel, Copper To Rail, Copper To Cast Iron And One For Welding Copper To Steel For Cathodic Protection (2)
  • General Purpose (4)
  • General Purpose Circuits;Lighting Circuit Protection;Meter Circuits (2)
  • General Purpose Wiring (51)
  • General Purpose Wiring;Wet/Dry Locations (6)
  • Ground Service Entrance and Interior Wiring Application (5)
  • Grounding and Bonding (10)
  • Grounding and Bonding;For Welding Copper to Copper, Copper to Steel, Copper to Rail, Copper to Cast Iron and One for Welding Copper to Steel for Cathodic Protection (3)
  • Hazardous Location (6)
  • Hazardous Locations (2)
  • Ind Facilities & Factories - Facility: Automation and Monitoring (3)
  • Ind Facilities & Factories - Facility: Power Distribution and Control (7)
  • Ind Facilities & Factories - Facility: Safety and Security Systems (112)
  • Industrial;Commercial (4)
  • Industrials, Hospitals, Utilities, Marine, Computer (6)
  • lighting (6)
  • Mechanical/Home Repair/Auto/Plumbing (7)
  • Mechanical/Home Repair/Plumbing/Auto (2)
  • Mighty-Align® "Slip" Style Coupling - Used to join two lengths of EMT together.Backing out center screw allows the slip coupling to be temporarily located on one cut end while adjacent end is slid into place.Back out center screw stop as necessary to slip coupling over conduit.Fully install center screw stop between conduits.Ensure that both ends of conduit are visible in sight hole.Tighten all set screws. Patented (2)
  • Mobile Home (3)
  • Motor and Motor Branch Circuit Protection (4)
  • Motor Control Transformers and Other Circuits with in-Rush Currents (6)
  • New and Old Work Residential Construction (2)
  • New Work Residential Construction (5)
  • Non-Indicating (3)
  • Residential Bldgs & Facilities - Residential Bldgs & Facilities - Other (2)
  • Set screw type fitting used to join EMT to box or enclosure. Concrete-tight. (2)
  • Set Screw Type Fitting Used to Join EMT to Box or Enclosure. Concrete-Tight when Taped (2)
  • Set screw type fitting used to join EMT to rigid or IMC. Concrete-tight. Furnished with Tri-Drive slot/Phillips/Robertson head screws. (3)
  • Stair-Wells;Hallways;Offices;Commercial (3)
  • STANDARD (2)
  • Stationary Mach Equip In Factory - Robotics (3)
  • Stationary Machinery and Equipment Outside Factory - Stationary Machinery and Equipment Outside Factory - Other (110)
  • Supplemental, Low Voltage, Low Amperage Control Circuits (1)
  • Tap connections and in-line splice/reductions are made quickly and easily with the UNITAP™ line of connectors (2)
  • Terminate "upsized" conductor and/or fine strand conductor into mechanical connectors found in molded case circuit breakers, panel board equipment, and other switchgear. (2)
  • The 3000-RT Series are compression type connectors used to join unthreaded steel rigid conduit to box or enclosure in a wet location. (2)
  • To ground and secure EMT raceway sections together in wet locations (5)
  • To ground and secure EMT Raceways sections together (7)
  • To ground and secure EMT Raceways to boxes and enclosures (23)
  • Transformer Protection (2)
  • Used to join EMT to box or enclosure. Concrete/Raintight (2)
  • Used to join EMT to box or enclosure. Concrete tight. (10)
  • Used to join EMT to box or enclosure. Concrete tight/Raintight (4)
  • Used to join EMT to box or enclosure. Concrete tight/Raintight. Insulated Throat - 105°C. Patented (5)
  • Used to join steel EMT to box or enclosure. Concrete-tight. 1/2" thru 2" suitable for use with Steel or Aluminum EMT. (4)
  • Used to join steel EMT to box or enclosure. Concrete-tight. 1/2" thru 2" suitable for use with Steel or Aluminum EMT. Insulator rated 105degree C. (2)
  • Used to join steel EMT to box or enclosure. Concrete-tight. 2 1/2" thru 4" suitable for use with Steel EMT. Insulator rated 105°C. 2-1/2" through 4" also listed for use with Steel and Aluminum Rigid Conduit. (2)
  • Used to join two lengths of EMT, Rigid and IMC. Concrete tight when taped. (3)
  • Used to join two lengths of EMT. 1/2" through 1 1/4" Concrete-tight, 1 1/2" thru 4" concrete-tight when taped. 2" thru 4" suitable for use with aluminum or steel EMT. (4)
  • Used to join two lengths of EMT. Concrete-tight. (6)
  • Used to join two lengths of EMT. Concrete-tight/Raintight. Patented (5)
  • Used to Secure EMT to Box or Enclosure (3)
  • Used to secure steel EMT to box or enclosure. Concrete tight when taped. (2)
  • Used to secure steel EMT to box or enclosure. Concrete-tight when taped. Plastic insulator rated 105 degree C. (3)
  • Used with locknut to terminate threaded rigid and IMC to box, or used with connector to prevent damage to wire insulation. Rated 105 degree C. (3)
  • Vehicles: On-Road - PickUp & Delivery: Food (27)
  • Wet Location (10)
  • Wet/Dry and Interior Wiring (9)
  • Wire and Cable Labeling (3)
  • Wire Termination (106)
  • Show More...

• Interrupt Rating

  

  • 10 kAIC (20)
  • 100 Amp at 250 Vac, 10000 Amp at 125 Vac (2)
  • 10000 Amp (1)
  • 10000 Amp (RMS Symmetrical) (9)
  • 100000 Amp (RMS Symmetrical UL) (9)
  • 20 (18)
  • 20 kAIC at 125 Vdc200 kAIC at 250 Vac (5)
  • 20 kAIC at 300 Vdc200 kAIC at 600 Vac (2)
  • 200 (28)
  • 200 AIC at 250 Vac10 kAIC at 125 Vac/dc (2)
  • 200 Amp at 250 Vac, 10000 Amp at 125 Vac (5)
  • 200 kAIC (19)
  • 200 kAIC (RMS Symmetrical) (9)
  • 200 kAIC (RMS Symmetrical):20 kAIC (DC) (25)
  • 200 kAIC at 600 Vac20 kAIC at 300 Vdc (7)
  • 35 A @ 250 V ac;10000 A @ 125 V ac (2)
  • V ac:200 kAIC (RMS Symmetrical);300 kAIC (Littelfuse self-certified);V dc:20 kAIC (4)
  • Show More...

• Diameter

  

  • 0.187 (6)
  • 0.375 (2)
  • 0.41 in;10.3 mm (23)
  • 0.81 in (11)
  • 0.84 in;21.3 mm (2)
  • 1.06 in (6)
  • 1.08 in (2)
  • 1.11 in (3)
  • 1.19 in (3)
  • 1.43 in (2)
  • 1.61 in (4)
  • 1.75 in (2)
  • 1.813 in (2)
  • 1-1/16 in (2)
  • 1-1/32 in (2)
  • 1-1/8 in (2)
  • 1-15/16 in (4)
  • 1-17/32 in (5)
  • 13/32 INCH (1)
  • 1-3/8 in (3)
  • 1-5/16 in (3)
  • 1-9/32 in (2)
  • 2 in (2)
  • 2.38 in (2)
  • 2-5/32 in (3)
  • 3.89 in (2)
  • 3.929 INCH (1)
  • 3.931 INCH (1)
  • 3-11/16 in (2)
  • 3-3/16 in (2)
  • 4 in (5)
  • 4 INCH (8)
  • 4.36 INCH (1)
  • 4.65 INCH (1)
  • 4-3/4 INCH (1)
  • 5.2 mm (3)
  • 5.75 INCH (2)
  • 5-1/8 in (2)
  • 7/8 in (2)
  • Show More...

• Overall Length

  

  • 0.5 in;20 mm (2)
  • 1.16 in (2)
  • 1.47 in;37 mm (2)
  • 1.5 in;38.1 mm (18)
  • 1.5 in38.1 mm (4)
  • 1.7 in (3)
  • 1.9 in (2)
  • 1000 ft (67)
  • 18.5 in (2)
  • 5 in (11)
  • 5.50 in (5)
  • 5000 ft (5)
  • 51869 (2)
  • 7.7 in (5)
  • 7.88 in (3)
  • 9.63 in (4)
  • Show More...

• Operating Temperature Range

  

  • -40° to +158 °F;-40° to +70 °C (11)
  • 40°F - 110°F (4)
  • Show More...

• Overall Width

  

  • 1.3 in (2)
  • 1.6 in (2)
  • 1.7 in (2)
  • 4.5 in (5)
  • Show More...

• Overall Height

  

  • 0.1 in (4)
  • 5.4 in (4)
  • Show More...

• Special Features

  

  • (5) Steps Adjustments, Permalock[R] Fastener, Right Angle Teeth, Reinforced Edge (2)
  • (7) Steps Adjustments, Permalock[R] Fastener, Right Angle Teeth, Reinforced Edge (2)
  • 100 (2)
  • 100 Amp (2)
  • 10250T series (2)
  • 2W DC coil power (3)
  • Accomodates Stranded cable, With Inspection window, Long barrel (2)
  • Accurately tapped, tapered threads for tight, rigid joints and excellent ground continuity;Allow connections for branch runs;Connect and change direction of conduit runs;High tensile strength and ductility, high corrosion resistance, high impact and shock resistance;Make bends in conduit system;Permit access to conductors for maintenance;Provide openings for splicing;Serve as pulling fittings;Sizes with flat-back design ideal where fitting is mounted flat against surface;Smooth, rounded integral bushings i (6)
  • Aggressive Adhesive;Harsh Environment;Heat Resistant;Permanent Adhesive (3)
  • Aggressive Adhesive;Harsh Environment;Outdoor Durable;Permanent Adhesive (5)
  • Aggressive Adhesive;Low Temperature;Permanent Adhesive (3)
  • AL9CU- UL Listed for use with fine strand conductor (2)
  • All Connectors are Tin-Plated;Connectors Feature Rounded Bottoms (2)
  • Allows misaligned knockout connection by rolling the offset nipple until aligned with each knockout (2)
  • Amber block (6)
  • Approved for use in wet locations;Stainless steel screws;The cover is secured with clips, not screws;Unique Wedge-Lok clip cover design allows easy removal without damaging the conduit body;Wiring capacity: 0.8 CU-IN as per NEC 314.16(A) (2)
  • Approved for use in wet locations;Stainless steel screws;The cover is secured with clips, not screws;Unique Wedge-Lok clip cover design allows easy removal without damaging the conduit body;Wiring capacity: 2 CU-IN as per NEC 314.16(A) (2)
  • Approved for use in wet locations;Stainless steel screws;The cover is secured with clips, not screws;Unique Wedge-Lok clip cover design allows easy removal without damaging the conduit body;Wiring capacity: 3 CU-IN as per NEC 314.16(A) (2)
  • Approved for use in wet locations;Stainless steel screws;The cover is secured with clips, not screws;Unique Wedge-Lok clip cover design allows easy removal without damaging the conduit body;Wiring capacity: 4.8 CU-IN as per NEC 314.16(A) (2)
  • Ball Burnished, mirror smooth finish (3)
  • Bayonet Type Knob, For Used With Type SFE and 1/4 In X Various Length Fuse (2)
  • Bridgeport Fittings Products are safety listed to ensure code compliance. With our wide selection of fittings, Bridgeport has a connector, coupling or transition fitting to meet your needs. (2)
  • Clear Plastisol covered AL6061-T6 aluminum body, Clear Plastisol (2)
  • Concentric and Eccentric Knockouts;Use in Fire-Rated Assemblies (15)
  • Concrete Tight (14)
  • Concrete Tight/Raintight (2)
  • Concretetight (7)
  • Concrete-Tight (42)
  • Concrete-tight when taped (2)
  • Concretetight When Taped (7)
  • Concrete-tight/Raintight (3)
  • Concretetight;Raintight (5)
  • Concrete-Tight;Raintight (32)
  • Conduit Hubs Have Tapered Threads and Feature Integral Bushings for Protection of Wire Insulation (2)
  • Connectors assembled with knockout gasket, no separate pieces to buy and stock (5)
  • CR (2)
  • Electro-Tin Plated (3)
  • Factory assembled (2)
  • Fast-Acting (5)
  • Features: All Splicer/Reducers Are Dual Rated For Use With Aluminum And Copper Conductors And Are Constructed From High Strength, Tin Plated Aluminum, PENTROX Oxide Inhibiting Joint Compounds Are Recommended For All Aluminum Applications, All Connectors Are Tin-Plated: Provide Low Contact Resistance And Prevents Galvanic Corrosion, Connectors Feature Rounded Bottoms: Facilitates Taping, Solid Center Barrier: Prevents Contact Of Dissimilar Metals, Large Screw Diameters: Ensures Greater Surface Contact With (3)
  • Features: All-Aluminum Electro-Tin Plated design eliminates possible bi-metallic corrosion and provides shortest connector length design possible for easy installation in equipment with limited space. Solid electro-tin plated aluminum plug makes properly connection easily. Smooth surface on the solic EC plug provides greater area contact establishing excellent conductivity. Solid plug has equivalent cross-sectional area as current carrying equivalent copper wire permitting use of larger aluminum wire to co (2)
  • Features: Clear Plastisol covered AL6061-T6 aluminum body, Saves time, lowers installation costs, eliminates taping, Oxide inhibitor pre-installed, Inhibits moisture and contaminants from entering the contact area (4)
  • Features: Clear Plastisol Covered Al6061-T6 Aluminum Body: Saves Time, Lowers Installation Costs, Eliminates Taping, Clear Plastisol: Allows Visual Confirmation That Conductor Is Properly Inserted, Oxide Inhibitor Pre-Installed: Inhibits Moisture And Contaminants From Entering The Contact Area, Range-Taking: Reduces Number Of Connectors Carried In Inventory, In-Line Splice/Reductions Are Made Quickly And Easily With The Unitap Line Of Connectors, UL486B Listed, Dual-Rated AL9CU For Any Stranded Copper Or S (2)
  • Features: Fits Y35, Y39, Y750HS, PAT750, PAT750XT-18V, PAT46-18V, Y46 (With PUADP-1 Adapter) (2)
  • Features: High Copper Alloy Ground Connector For Joining A Range Of Cable, Parallel Or At Right Angles To Rod Or Tube, Especially Good For Fence Posts, High Copper Alloy Cast Body With DURIUM U-Bolts, Nuts And Lockwashers, Permit Entire Connection To Be Buried In Ground Or Concrete Without Danger Of Corrosion, One-Wrench Installation, UL467 Listed, Acceptable For Direct Burial, Ground Rod Size: 2-1/2 - 2-7/8 IN, Tube (ips) Size: 2-1/2 IN, Height: 5 IN, Width: 4-1/4 IN, Installation Torque: 240 IN-LB (2)
  • Features: High Copper Alloy Ground Connector For Joining A Range Of Cable, Parallel Or At Right Angles To Rod Or Tube, Especially Good For Fence Posts, High Copper Alloy Cast Body With DURIUM U-Bolts, Nuts And Lockwashers, Permit Entire Connection To Be Buried In Ground Or Concrete Without Danger Of Corrosion, One-Wrench Installation, UL467 Listed, Acceptable For Direct Burial, Ground Rod Size: 4 - 4-1/2 IN, Tube (ips) Size: 4 IN, Installation Torque: 240 IN-LB, Height: 6-3/8 IN, Width: 5-7/8 IN (2)
  • Features: High Copper Alloy Ground Connector For Joining A Range Of Cable, Parallel Or At Right Angles To Rod Or Tube, Especially Good For Fence Posts, High Copper Alloy Cast Body With DURIUM U-Bolts, Nuts And Lockwashers, Permit Entire Connection To Be Buried In Ground Or Concrete Without Danger Of Corrosion, One-Wrench Installation, UL467 Listed, Acceptable For Direct Burial, Height: 3-1/2 IN, Ground Rod Size: 1-3/8 - 1-1/2 IN, Tube (ips) Size: 1-1/4 IN, Installation Torque: 240 IN-LB, Width: 3 IN, Rebar (2)
  • Features: High-Conductivity Copper Ground Connector For Connecting A Small To Medium Range Copper Ground Conductor To Water Pipe As Well As Structural And Reinforcing Rod Shapes, Cable Clamp Swivels At 90 DEG, Permits Parallel Grounding Of One Pipe Or A 90 DEG Cable Run For Grounding Several Parallel Pipes, One-Wrench Installation, Simplified Installation, Long Lasting Corrosion Resistance And Acceptable For Direct Burial In Earth Or Concrete, UL467 Listed, Provides Quality Assurance To Recognized Industry (2)
  • Features: HYLUG Type YAV Is A Seamless, Heavy Duty Uninsulated Compression Terminal Manufactured From Electrolytic Copper And Is For Use On Type AN Aircraft Cable, Extra Flexible Conductors And Commercial (Code) Conductors, The Seamless Tubing Produces A Double Thick Tongue And Seamless Barrel Design Provides A Strong Connector For Demanding Applications Requiring High Reliability, Applications Include Aircraft, Industrials, Hospitals, Electric Utilities, Marine, Computers, And Other Equipment Subject To V (4)
  • Features: Made Of Tin-Plated Cast Copper Alloy, It Accommodates Either One Or Two Conductors, Copper Or Aluminum Cable, In Addition To A Low Profile Head With A Deep Phillips Recess, The Galvanized Steel Bolt Has A Ribbed Neck Which Prevents Rotation During Installation When Installed In A 0.44 Diameter Hole, When Used On Aluminum Conductor, The Cable Must Be Scratch Brushed And PENETROX A Joint Compound Must Be Used On Cable And Connector, UL467 Listed For Copper Conductor Only, Suitable For Direct Burial (2)
  • Features: The INSULUG Type YAEV Is Designed For Very Demanding High Vibration Applications Encountered In Aircraft And Aboard Ships As Well As Motor Lead Applications In Hospitals, Industrials And Generating Plants, The Nylon Insulated Seamless, Electrolytic Copper Barrel With Double Thick Tongue Provides An Extra Strong Insulated Connection, The Terminal Is Rated 105 DEG C And Meets SAE-AS7928 Requirements, Double Thick Tongue: Provides Maximum Reliability And Electrical Capacity Plus An Extra Strong Term (3)
  • Features: The INSULUG Type YAEV-L Is Designed For Very Demanding High Vibration Applications Encountered In Aircraft And Aboard Ships As Well As Motor Lead Applications In Hospitals, Industrials And Generating Plants, The Nylon Insulated Seamless, Electrolytic Copper Barrel With Double Thick Tongue Provides An Extra Strong Insulated Connection, The Terminal Is Rated 105 DEG C And Meets SAE-AS7928 Requirements, Double Thick Tongue: Provides Maximum Reliability And Electrical Capacity Plus An Extra Strong Te (2)
  • Features: The Type SP VINYLINK Is A PVC Insulated Seamless Butt Splice, Type SP VINYLINK Is Designed To Accommodate A Broad Range Of 600 Volt Cables, Manufactured From Seamless Electrolytic Copper Tubing: Provides Maximum Conductivity And Tensile Strength, In A High Quality Design With NO Seams To Split, Funnel Entry: Provides Easy Wire Insertion, Electro-Tin Plated: Provides Durable Long Lasting Resistance To Corrosion, Expanded Insulation Support: Lower Inventory Requirements, Red Wire Range Of 22-16: Lo (3)
  • Features: Type GAR-BU Is A High-Conductivity Copper Ground Connector For Connecting A Small To Medium Range Copper Ground Conductor To Water Pipe As Well As Structural And Reinforcing Rod Shapes, Cable Clamp Swivels At 90 DEG, Permits Parallel Grounding Of One Pipe Or A 90 DEG Cable Run For Grounding Several Parallel Pipes, One-Wrench Installation, Simplified Installation, DURIUM Silicon Bronze Hardware (-BU Series), Long Lasting Corrosion Resistance And Acceptable For Direct Burial In Earth Or Concrete, U (2)
  • Features: UL Listed 90 DEG C, 600 V To 35 KV 45 DEG, 90 DEG Angles Are Available, Tools, Die Set Catalog Number, And (number Of Crimps): MD6, OUR840, MD7-34R Mechanical: W26VT (2), W26RT (2), X26RT (2),BCT500HS, Y500CTHS Hydraulic: W26VT (2),W26RT (2), X25RT (2), X26RT (2), Y35, Y39, Y750, Y46, PAT750 Hydraulic:U26RT (1), Dieless: MY29-3 (1), MY29-11 (1), MRC840 (2), Y644HS (1), Y81KFT (1), Y81KFTMBH (1), PAT81KFT-18V (1), Wire Strip Length: 1 IN, Conductor Type: Commercial Stranded Copper, Tongue Angle: S (2)
  • Fence Post Grounding Connector;Acceptable for Direct Burial (2)
  • Finger Safe (4)
  • For Two-Hour Fire Rated Walls (5)
  • For use in Wet Locations in Canada Only (6)
  • For Used on an Type Aircraft Cable;Extra Flexible Conductor and Commercial Conductor (4)
  • Furnished with 2-way Phillips/Slotted Head Screw (4)
  • Furnished with Tri-Drive slot/Phillips/Robertson head screws (5)
  • Furnished with Tri-Drive Slotted/Phillips/Robertson Screw (2)
  • Heat Shrink (9)
  • Includes Sealing Washer;Bonds Conduit to Box or Enclosure;Corrosion Resistant Protection from Moisture & Oils;Designed to Protect Against Excessive Vibration (6)
  • Interrupt Rating 200 Amp at 250 Vac, 10000 Amp at 125 Vac/Vdc, Material Ceramic Tube, Nickel Plated Brass Endcap, ROHS Compliant (2)
  • Interrupt Rating 35 Amp at 250 Vac, 10000 Amp at 125 Vac, Material Glass Tube, Nickel Plated Brass Endcap, Low Breaking Capacity, ROHS Compliant (2)
  • LED Emergency Light (6)
  • LED Lamps with a Life-Cycle of more than 10 Year;Lamp-Heads are Fully Adjustable (2)
  • Low Breaking Capacity, Interrupt Rating 200 Amp at 125 Vac, Material Glass Tube, Nickel Plated Brass Endcap, ROHS Compliant (2)
  • Low Breaking Capacity, Interrupt Rating 35 Amp at 250 Vac, 10 kA at 125 Vac, Material Glass Tube, Nickel Plated Brass Endcap, ROHS Complaint (3)
  • Low Breaking Capacity, Interrupt Rating 35 Amp at 250 Vac, 10 kA at 125 Vac, Material Glass Tube, Silver Plated Brass Endcap, ROHS Compliant (3)
  • Machine Tapped Device Holes;Rigid Hard Box Construction;2 HR Fire Resistive Walls (3)
  • MOLD,CABLE TO VERT STL,45DEG TAP DOWN (2)
  • Nickel Plated Brass Endcap (15)
  • Nickel Plated Bronze Endcap (9)
  • Nickle Plated Brass Endcap (10)
  • Plastic Insulator Rated 105 Degree C (3)
  • Point-of-purchase packaging (2)
  • Pre-printed (10)
  • Raintight (2)
  • Rejection Style (36)
  • Rejection-style design prevents replacement errors when used with recommended fuse blocks Versatile design for individual component and branch circuit protection (2)
  • Removable;Repositionable (2)
  • Renewable (41)
  • Reverse Service (4)
  • Rounded Surface of Bushing (2)
  • Screw/Quick connect (3)
  • Self Laminating & Wrap Around (4)
  • Small Footprint (2)
  • Split-Bolt Has Free-Running Threads and Easy to Grip Wrench Flats;Highly Resistant to Season Cracking and Corrosion;High Strength (2)
  • Straight Jaw (6)
  • Super Lag, Time Lag (2)
  • These Dual-Rated Two Conductor Lugs are Constructed from High Strength Aluminum Alloy and Electro Tin-Plated to Provide Low Contact Resistance (6)
  • Time-Delay (7)
  • Time-delay for control transformer inrush loads without nuisance opening Highly current-limiting for low peak let-thru current Rejection-style design prevents replacement errors (when used with recommended fuse blocks) High visibility orange label ensures instant brand recognition, and simplifies replacement Metal-embossed date and catalog number for traceability and lasting identification Fiberglass body provides dimensional stability in harsh industrial settings High-grade silica filler ensures fast arc (2)
  • UL Listed 90 DEG C, 600 V - 35 KV,Tongue Angle: Straight (7)
  • Unique Wedge-Lok Clip Cover Design Allows Easy Removal Without Damaging The Conduit Body (3)
  • Universal terminal, These dual-rated panelboard lugs are constructed from high strength extruded aluminum alloy and electro tin-plated to provide low contact resistance (2)
  • Universal, For Use With 1/4 In X 7/8 In To 1-1/4 In Fuse (1)
  • Used with 10250T Series, All Operator Types (2)
  • Used with 10250T Series, Pushbutton Operators and Indicating Lights (27)
  • Used with 10250T Series, Selector Switch and Roto-Push Operators (11)
  • Watertight, Grounding Style 2, NEMA 4X Enclosure (2)
  • Wedge-Lok (3)
  • With 1/2 And 21/32 IN Conduit Knockouts, Nonmetallic Sheathed CL 26 Cable Clamps (2)
  • With Bridgeport’s newly redesigned Raintight Compression Couplings, 266-RT through 269-RT, contractors can install just one wet location fitting for either thread less Rigid / IMC or EMT. (2)
  • Zinc Plated Finish (2)
  • Show More...

• Package Quantity

  

  • 1 ct (16)
  • 1 CT;10 PK (11)
  • 1 CT;100 PK (3)
  • 1 CT;12 PK (6)
  • 1 PK (14)
  • 1 PK;20 CT (2)
  • 1 PK;5 CT (3)
  • 10 CT (36)
  • 10 PK;1 CT (8)
  • 10 PK;2 CT (7)
  • 100 CT (5)
  • 100 PK (7)
  • 100 PK;1 CT (2)
  • 100 PK;10 CT (3)
  • 12 PK;1 CT (2)
  • 20 Cartridge/BX (3)
  • 20 CT (2)
  • 20 CT;1 PK (2)
  • 20 CT;100 PK (3)
  • 20 CT;200 PK (2)
  • 20 PK (2)
  • 200 CT (2)
  • 200 PK;20 CT (4)
  • 200 PK;50 CT (3)
  • 240 CT (2)
  • 25 CT (4)
  • 25 CT;1 PK (3)
  • 25 CT;250 PK (3)
  • 25 PK (9)
  • 25 PK;1 CT (9)
  • 250 PK (2)
  • 250 PK;25 CT (7)
  • 40 PK;10 CT (2)
  • 5 CT (2)
  • 5 CT;1 PK (3)
  • 5 CT;25 PK (3)
  • 5 CT;50 PK (2)
  • 50 CT (2)
  • 50 PK (10)
  • 500 PK;50 CT (3)
  • 6 Master CT (3)
  • 6 PK (2)
  • 6 PK;1 CT (3)
  • Show More...

• Weight

  

  • 0.0002 lb/EA (2)
  • 0.0005 lb/EA (2)
  • 0.0007 lb/EA (2)
  • 0.01 lb (9)
  • 0.02 lb (19)
  • 0.03 lb (2)
  • 0.05 lb (2)
  • 0.1 lb (2)
  • 0.1 lb/EA (2)
  • 0.12 lb/EA (3)
  • 0.125 lb;0.057 kg (2)
  • 0.138 lb/EA (2)
  • 0.14 lb (3)
  • 0.14 lb/EA (3)
  • 0.16 lb (4)
  • 0.2 lb (5)
  • 0.24 lb/EA (2)
  • 0.25 lb (6)
  • 0.3 lb (4)
  • 0.31 lb (2)
  • 0.35 lb (2)
  • 0.39 lb/EA (2)
  • 0.4 lb (4)
  • 0.41 lb (2)
  • 0.43 lb (3)
  • 0.52 lb/EA (2)
  • 0.67 lb (6)
  • 0.7 lb (2)
  • 1 lb (4)
  • 1.03 lb (2)
  • 1.653 (2)
  • 108 lb/1000 ft (2)
  • 13 lb/100 (2)
  • 15.00 lb/100;6.80 kg/100 (2)
  • 16.33 lb/100;36 kg/100 (2)
  • 163 lb/mft (2)
  • 18 lb/100 (2)
  • 180 lb;0.082 kg (6)
  • 198 lb/1000 ft (2)
  • 2.5 lb (3)
  • 2.6 (2)
  • 2.83 lb (2)
  • 2.9 lb (3)
  • 2.95 lb (2)
  • 23.59 lb/100;52 kg/100 (3)
  • 244 lb/1000 ft (3)
  • 247 lb/mft (2)
  • 292 lb/1000 ft (9)
  • 296 lb/mft (2)
  • 3 lb (2)
  • 344 lb/1000 ft (2)
  • 39 lb/1000 ft (3)
  • 448 lb/1000 ft (5)
  • 47.17 lb/100;104 kg/100 (2)
  • 516/1000 lb/ft (3)
  • 521/1000 lb/ft (2)
  • 534 LB/1000 FT (1)
  • 550 lb/1000 ft (8)
  • 57 lb/1000 ft (2)
  • 671 lb/1000 ft (4)
  • 709 lb/1000 ft (2)
  • 73 LB PER 100 FT (1)
  • 770/1000 lb/ft (3)
  • 8 lb/100;4.54 kg/100 (2)
  • 824 lb/1000 ft (5)
  • 84/1000 lb/ft (2)
  • 942/1000 lb/ft (2)
  • Show More...

• Includes

  

  • Canopy;Nickel Cadmium (NiCad) or Nickel Metal Hydride (NiMh) (3)
  • Set Screw (4)
  • Stainless Steel Screw (3)
  • Stainless Steel Screws (3)
  • Show More...

• Number Of Pad Holes

  

  • 1 (65)
  • 2 (38)
  • Show More...

• Package Type

  

  • Carton (51)
  • Reel (39)
  • Show More...

• Manufacturer Status

  

  • Inactive (59)
  • Non-Stock (18)
  • Show More...

• Insulation Material

  

  • Polyethylene (65)
  • Polyethylene (XLPE) (16)
  • XLPE (24)
  • Show More...

• Category Description

  

  • 4 SQ BOXES (7)
  • ALUM BUILDING WIRE (417)
  • ALUMINUM RIGID CONDUIT (10)
  • Breaker Enclosures with or without Breaker (14)
  • Commercial dimmers, motion sensors, & photo cells (2)
  • Comp & Mech Lugs and Butt Splices (146)
  • CORD CONNECTORS & CORD GRIPS (5)
  • COUPLINGS, ADAPTERS, REDUCERS, BUSHINGS, & CAPS (15)
  • DECORATIVE RESIDENTIAL (3)
  • DIECAST EMT FITTINGS (48)
  • DIECAST OFFSET & CHASE NIPPLES (2)
  • Direct Burial Wire (46)
  • Emergency & Exit Lighting (10)
  • EMT STRAPS (22)
  • EXOTHERMIC GROUNDING PRODUCTS (23)
  • FANS & HEATERS (4)
  • FLEX & MC FITTINGS (2)
  • FLOOR BOXES (6)
  • Fluorescent (11)
  • FORM 5 CONDULETS, COVERS, & GASKETS (17)
  • FORM 7, 8, CONDULETS, COVERS, & GASKETS (24)
  • FUSE BLOCKS,FUSE HOLDERS (9)
  • Fuses & Fuse Accessories (177)
  • GLASS FUSES (and ceramic) (25)
  • HALOGEN (1)
  • HAND TOOLS (22)
  • HANDY BOXES (12)
  • HAZARDOUS LOCATION FITTINGS (9)
  • Job Site & Safety Apparel (7)
  • LED ARCHITECTURAL & SPECIFICATION LIGHTING (2)
  • LED SPECIALTY LAMPS & MODULES (12)
  • LED TRACK, RAIL, TASK & UNDERCABINET LIGHTING (9)
  • Liquid Tight (3)
  • LOADCENTER ACCESSORIES (4)
  • Locknuts, Bushings, Re-Bushings, Re-Washers, Threaded Plugs, Knockout Plugs (31)
  • MAIN BREAKERS (2)
  • MERCURY VAPOR (4)
  • METALLIC FITTINGS (28)
  • Meter Socket Accessories (4)
  • MIDGET FUSES (75)
  • MISC FITTINGS (6)
  • Misc. HVACR Equipment from secondary vendors (3)
  • Miscellaneous commercial & industrial devices (2)
  • OCTAGON BOXES (9)
  • OILTIGHT OPERATORS.30MM (180)
  • Pin & Sleeve Devices (3)
  • PLASTIC BOXES (16)
  • Printers and Labeling (36)
  • PROXIMITY SWITCHES AND CORDSETS (36)
  • PUSHBUTTONS & CHIMES (6)
  • PVC BOXES (2)
  • RENEWAL PARTS (2)
  • Residential dimmers, motion sensors, controls, & photo cells (2)
  • Residential GFCI devices (4)
  • RIGID COUPLINGS (3)
  • RIGID ELBOWS (2)
  • RIGID STRAPS & CLAMPBACKS (12)
  • SENSORS (3)
  • SERVICE ENTRANCE - SEU & SER (17)
  • SERVICE ENTRANCE FITTINGS: Weatherheads & Grounding Fittings & Ground Rods (54)
  • SPLIT BOLTS (16)
  • STANDARD DUTY PUSHBUTTONS (10250H-) (7)
  • STEEL BOXES & COVERS (8)
  • STEEL EMT FITTINGS (184)
  • TERMINAL BLOCK ACESSORIES (8)
  • TERMINAL BLOCKS POWER DIST BLOCKS (2)
  • TERMINALS (12)
  • TIMERS (2)
  • Watertight Hub, 3-PIECE COUPLINGS, THREADLESS COUPLINGS AND THREADLESS CONNECTOR (13)
  • WEATHERPROOF BOXES & COVERS (6)
  • WIRE LUBE, MARKERS, & TIES (21)
  • Show More...

• Minimum Qty

  

  • 10 (9)
  • 100 (2)
  • 1000 (39)
  • 1500 (2)
  • 200 (1)
  • 2000 (10)
  • 2500 (92)
  • 4000 (7)
  • 5 (1)
  • 500 (4)
  • 5000 (69)
  • Show More...

• Connector Type

  

  • Combination (4)
  • Compression (70)
  • Made in USA Compression (5)
  • PUSH-EMT® (4)
  • Raintight Compression (7)
  • SET SCREW (45)
  • Steel Raintight/Concrete-Tight Insulated (7)
  • TRANSITION (3)
  • Show More...

• Color

  

  • Beige/Tan (6)
  • Black (44)
  • Black (Actuator) (12)
  • Black on Clear (2)
  • Black on White (14)
  • Blue (4)
  • Brown (3)
  • Channellock Blue (Handle) (5)
  • Gray (17)
  • Green (8)
  • Green (Actuator) (2)
  • Interrupt Rating 200 Amp at 250 Vac, 10000 Amp at 125 Vac/Vdc, Material Ceramic Tube, Nickel Plated Brass Endcap (13)
  • Metallic (43)
  • Orange (2)
  • Purple (3)
  • RAL 7035 GRAY (2)
  • Red (11)
  • Red (Actuator) (7)
  • White (14)
  • Yellow (4)
  • Yellow (Extruded Stripe) (5)
  • Show More...

• Finish

  

  • ~WHITE GLOSS (13)
  • Aluminum (2)
  • Ball burnish (24)
  • Ball Burnished;Mirror Smooth (15)
  • Black (5)
  • Electrogalvanized with Aluminum Acrylic Paint (2)
  • Electrogalvanized With Aluminum Acrylic Painted (5)
  • Epoxy Powder Coat (2)
  • Galvanized (2)
  • Gloss (11)
  • Hot Dip Galvanized (2)
  • Light (13)
  • Matte (27)
  • Natural (3)
  • Natural Aluminum (9)
  • NO FINISH (3)
  • Plastisol Insulated (2)
  • Pre-Galvanized (20)
  • Semi-Gloss (2)
  • Tinned (2)
  • Tin-Plated (2)
  • Triple-Coat (Zinc Electroplate, Chromate And Epoxy Powder Coat) (9)
  • white (4)
  • Zinc Electro Plated (23)
  • Zinc Electroplate (3)
  • Zinc Electroplated (46)
  • Zinc Electro-Plated (9)
  • Zinc Plated (24)
  • Show More...

• Color Code

  

  • BLACK (16)
  • BLUE (14)
  • BROWN (17)
  • GRAY (10)
  • GREEN (4)
  • ORANGE (5)
  • PINK (10)
  • PURPLE (7)
  • RED (19)
  • TAN (2)
  • WHITE (7)
  • YELLOW (8)
  • Yellow Extruded Stripe (6)
  • Show More...

• Type

  

  • 5 x 20 mm Fast-acting glass tube fuse (2)
  • AC Adapter (2)
  • Accessory (10)
  • Aluminum Pin Adapters (2)
  • AMS, Dual Rated (5)
  • BIBD, Multi-Port (4)
  • BISR, In-Line (2)
  • BIT (2)
  • BIT, UNITAP (2)
  • Blank Clip Cover With Screw (16)
  • Bolted Lugs & Terminals (16)
  • BUSHING (4)
  • CABLE CLAMP (1)
  • CEILING (1)
  • CLASS CC (15)
  • COMPRESSION (6)
  • Conduit Hangers (2)
  • Conduit outlet body (9)
  • CONNECTOR (59)
  • COUPLING (52)
  • Covers (2)
  • Device Boxes, Covers & Accessories (3)
  • DIE (3)
  • Diffuse reflective sensor (2)
  • DIRECT BURIAL (7)
  • Disconnect Connectors (3)
  • Electronic, Fast Acting (10)
  • Electronic, Medium Time Delay (2)
  • Emergency (6)
  • EMT Conduit Compression Coupling (12)
  • EMT Conduit Set Screw Coupling (9)
  • EMT Conduit Straight Compression Connector (7)
  • EMT Conduit Straight Set Screw Connector (16)
  • Exit sign / emergency light (2)
  • Fixture Accents/Parts (3)
  • Form-IN-Place Clip Cover With Integral Gasket (6)
  • FUSE (149)
  • Fuse Link (2)
  • Fuse Puller (1)
  • Gangable, New Work (2)
  • Gangable, Wall, New Work (3)
  • GAR (24)
  • GAR3902 (2)
  • GAR-BU (2)
  • GB (4)
  • GBM (3)
  • GC (4)
  • GC-CT (2)
  • GD (2)
  • GRC, High Strength (2)
  • GROUND CLAMP (1)
  • GROUNDING (1)
  • Handy Box (4)
  • Handy Box Cover (6)
  • Handy Box Extension Ring (2)
  • HID (7)
  • IN LINE (3)
  • Inline fuse holder (2)
  • IN-Line Splicer/Reducer (2)
  • KC and K2C Series (13)
  • KS (4)
  • KS, Compact (3)
  • KSU, Universal (2)
  • Label (20)
  • LED Tapes (8)
  • Liquid-tight flexible non- metallic conduit (2)
  • Long Barrel, Tin Plated (40)
  • LOW VOLTAGE (2)
  • Magnet Attachment (2)
  • Modular fuse block (6)
  • Molds (3)
  • Motor control renewal parts/accessories (2)
  • MR16 (2)
  • Octagon Box Extension Ring (2)
  • Octagonal Box (9)
  • Offset Nipple (2)
  • OLD WORK (2)
  • Old/New Work, Fan/Fixture (2)
  • Photoelectric Sensor (7)
  • Photoelectric sensor accessory (2)
  • PLUG (7)
  • Potentiometer (3)
  • Powder (6)
  • Printer Kit (2)
  • PUSHBUTTON (59)
  • Pushbutton accessory (93)
  • Raintight (2)
  • RECTANGULAR (1)
  • RHH/RHW-2/USE-2 (1)
  • Ring Tongue (9)
  • Room Controller (2)
  • SENSOR (2)
  • SER (1)
  • SET SCREW (1)
  • Set Screw Slip (2)
  • SLEEVE (10)
  • SP (3)
  • Square Box (8)
  • SQUARE BOX EXTENSION RING (1)
  • Standard Barrel, Tin Plated (50)
  • Standard Molds (9)
  • Tape Roll Refill (10)
  • Tenant main breaker (11)
  • Timing relay (2)
  • Tongue & Groove, Pump Plier, Water Plier, Tools (11)
  • TP-F (2)
  • Tubular (7)
  • Tubular photoelectric sensor (32)
  • Type LR Conduit Outlet Body (7)
  • UL98 fusible disconnect (4)
  • Undercabinet (6)
  • Very fast-acting fuse (2)
  • XHHW-2 (22)
  • YA-A (5)
  • YA-A, Dual Rated (2)
  • YA-E (2)
  • YAEV, Heavy Duty (4)
  • YAEV-L, Heavy Duty (2)
  • Show More...

• Temperature Rating

  

  • 105?°C (4)
  • 105° C (3)
  • 135 °C (2)
  • 194 (17)
  • 194° F (5)
  • -4 TO 140 DEG F (1)
  • 90 (8)
  • 90 °C (3)
  • 90 DEG C (30)
  • Show More...

• Number Of Gangs

  

  • 1 (26)
  • 2 (2)
  • 3 in (2)
  • 4 (2)
  • Show More...

• Operating Temperature

  

  • -13° to 131°F (-25° to 55°C) (2)
  • 140 Deg C (2)
  • 32° to 140°F (0° to 60°C) (2)
  • 32°-131°F (0°-55°C) (2)
  • -4° to 158°F (-20° to 70°C) (7)
  • -40° to 158°F (-40° to 70°C) (31)
  • Show More...

• Style

  

  • 2.5 at (120V) (2)
  • 30.5 mm (10)
  • Controls (2)
  • Interrupt Rating 200 Amp at 250 Vac, 10000 Amp at 125 Vac/Vdc, Material Ceramic Tube, Nickel Plated Brass Endcap (3)
  • Traditional (19)
  • Transitional (15)
  • UA (1)
  • Show More...

• Number Of Conductors

  

  • 1 (8)
  • 19 (Phase) (6)
  • 2 (12)
  • 3 (12)
  • 4 (2)
  • 7 (Phase) (3)
  • Show More...

• Shape

  

  • LR (2)
  • Octagon (7)
  • Rectangle (1)
  • Rectangular (18)
  • Round (9)
  • Square (6)
  • Straight (7)
  • Show More...

• Trade Size

  

  • 0.5 (8)
  • 0.75 (10)
  • 1 (20)
  • 1 in (8)
  • 1 INCH (1)
  • 1.25 (7)
  • 1.25 in (3)
  • 1.5 (9)
  • 1/2 (6)
  • 1/2 in (17)
  • 1-1/2 (8)
  • 1-1/2 in (4)
  • 1-1/4 (5)
  • 1-1/4 in (6)
  • 2 (8)
  • 2 in (5)
  • 2.5 (8)
  • 2-1/2 IN (3)
  • 2-1/2 INCH (1)
  • 3 (15)
  • 3 in (2)
  • 3 INCH (1)
  • 3.5 (3)
  • 3/4 (6)
  • 3/4 in (19)
  • 3-1/2 (5)
  • 3-1/2 INCH (2)
  • 4 (14)
  • 4 INCH (2)
  • Show More...

• Insulation Type

  

  • Nylon (6)
  • Plastisol (9)
  • Rubber (2)
  • Vinyl (8)
  • Show More...

• Number Of Positions

  

  • 2 (5)
  • 3 (7)
  • Show More...

• Size

  

  • 0.335 in H x 1 in W (3)
  • 0.335 in H x 7 ft L (2)
  • 0.375 in W x 21 ft L (3)
  • 0.5 (2)
  • 0.5 in W x 21 ft L (2)
  • 0.56 In Diameter X 2.00 In Length (15)
  • 0.69 In Diameter X 2.19 In Length (4)
  • 0.75 (4)
  • 0.75 in W x 21 ft L (2)
  • 0.81 In Diameter X 3.00 In Length (1)
  • 0.81 In Diameter X 5.00 In Length (22)
  • 1 (10)
  • 1 1/2 (4)
  • 1 1/4 (6)
  • 1.06 In Diameter X 5.50 In Length (5)
  • 1.06 In Diameter X 5.88 In Length (2)
  • 1.11 In Diameter X 7.88 In Length (4)
  • 1.25 (3)
  • 1.5 (2)
  • 1.5 x 0.41 (2)
  • 1.5 x 0.41;38.1 x 10.414 (2)
  • 1.56 In Diameter X 7.13 In Length (3)
  • 1.6 x 1.6 x 0.5 in (3)
  • 1.61 In Diameter X 9.63 In Length (5)
  • 1.9 x 1.9 x 2 in (2)
  • 1.9 x 1.9 x 2.1 in (3)
  • 1.9 x 1.9 x 2.2 in (3)
  • 1/2 (10)
  • 1/2 round (19)
  • 1/4 In Diameter X 1-1/4 In Length (2)
  • 10" Tongue & Groove (2)
  • 11.50 in H x 6 in W x 3.5 in D (2)
  • 1-1/2 (4)
  • 1-1/4 (3)
  • 12" Tongue & Groove (2)
  • 13/32 In Diameter X 1-1/2 In Length (55)
  • 16.5" Tongue & Groove (2)
  • 2 (6)
  • 2 1/2 (2)
  • 2.01 in x 1.12 in x 1.43 in (2)
  • 2.125 X 1.875 X 4 (3)
  • 2.34 In Diameter X 11.63 In Length (5)
  • 2.38 In Diameter X 8.63 In Length (5)
  • 2.4 x 2.1 x 3.2 in (3)
  • 2.88 In Diameter X 10.38 In Length (3)
  • 2.88 In Diameter X 13.38 In Length (2)
  • 3 (7)
  • 3 in x 18 in x 7 in (2)
  • 3/4 (12)
  • 30.5 MM (5)
  • 3-1/2 (4)
  • 4 (9)
  • 4 in W x 100 ft L (2)
  • 4 X 2.125 (6)
  • 4 X 4 X 1.5 (8)
  • 4 X 4 X 2.125 (5)
  • 4.6875 X 4.6875 X 2.125 (3)
  • 40 mm (12)
  • 5 mm Diameter X 20 mm Length (2)
  • 5.125 IN Length 5.25 IN Width 2.5 IN Height (4)
  • 5.20 mm Diameter X 20.00 mm Height (7)
  • 6.5" Tongue & Groove (2)
  • 65 mm (9)
  • 7 x 6 x 3 in (2)
  • 7.0 IN Length 6.62 IN Width 2.0 IN Height (2)
  • 9.5 in H x 4.5 in W x 2.5 in D (2)
  • 9.5" Tongue & Groove (2)
  • Interrupt Rating 200 Amp at 250 Vac, 10000 Amp at 125 Vac/Vdc, Material Ceramic Tube, Nickel Plated Brass Endcap (8)
  • Square (21)
  • Standard 40 mm (5)
  • Standard, square (6)
  • Show More...

• Jacket Material

  

  • Metal Free Polyvinyl Chloride (PVC) (14)
  • PVC (1)
  • THERMOPLASTIC PVC (1)
  • Show More...

• Depth

  

  • 0.9 (3)
  • 1 (4)
  • 1.3 (5)
  • 1.5 (4)
  • 1.6 (24)
  • 1.7 (26)
  • 1.9 (16)
  • 1-11/16 INCH (2)
  • 1-3/4 INCH (1)
  • 2 (8)
  • 2.1 (2)
  • 2.25 (2)
  • 2.4 (6)
  • 2.5 (4)
  • 2-1/2 INCH (2)
  • 2-3/4 INCH (3)
  • 2-3/8 INCH (1)
  • 2-7/16 INCH (3)
  • 3 INCH (3)
  • 3.5 (5)
  • 3.5 INCH (2)
  • 3-1/4 INCH (1)
  • 3-9/16 INCH (2)
  • 4.3 in (3)
  • 6 INCH (1)
  • 7 (5)
  • 8 INCH (1)
  • Show More...

• Die Index

  

  • 10 (9)
  • 12 (8)
  • 13 (9)
  • 14 (5)
  • 15 (7)
  • 16 (4)
  • 18 (5)
  • 19 (3)
  • 20 (7)
  • 22 (3)
  • 24 (5)
  • 296 (2)
  • 298 (2)
  • 299 (2)
  • 40 (2)
  • 435 (2)
  • 45 (1)
  • 49 (7)
  • 7 (9)
  • 8 (10)
  • 9 (2)
  • Show More...

• Height

  

  • 0.01 (4)
  • 0.1 (42)
  • 0.335 in (2)
  • 0.335;8.51 (4)
  • 0.5 (11)
  • 0.7 (2)
  • 0.71 (20)
  • 0.75 (2)
  • 0.8 (4)
  • 1 (6)
  • 1.26 (2)
  • 1.38 (2)
  • 1.5 (2)
  • 1.64 (2)
  • 1.75 (2)
  • 1.8 (2)
  • 1/2 in (2)
  • 11.5 (2)
  • 1-1/2 in (7)
  • 1-7/8 in (2)
  • 2 (20)
  • 2.1 (9)
  • 2.2 (12)
  • 2.3 (7)
  • 2.5 (3)
  • 2.6 (3)
  • 2.75 (3)
  • 2-1/8 in (5)
  • 3 (7)
  • 3 INCH (3)
  • 3.19 (2)
  • 3.2 (3)
  • 3.3 (2)
  • 3.4 (2)
  • 3.5 (3)
  • 3-1/4 INCH (1)
  • 3-3/4 in (5)
  • 3-3/4 INCH (2)
  • 4 (2)
  • 4 in (Box) (5)
  • 4.31 INCH (1)
  • 4.5 (1)
  • 4.7 (1)
  • 4.8 (1)
  • 4-1/16 INCH (1)
  • 5 (1)
  • 8.2 in (3)
  • 9.5 (2)
  • Show More...

• Poles

  

  • 1 (2)
  • 3 (3)
  • Single-pole (3)
  • Three-pole (5)
  • Two-pole (10)
  • Show More...

• Thickness

  

  • 0.003 (3)
  • 0.004 (10)
  • 0.0065 (3)
  • 0.015 (2)
  • Show More...

• Lamp Type

  

  • INCANDESCENT LANDSCAPE LIGHT FIXTURE, ECLIPSE TYPE; ALUMINUM MATERIAL; 4.5 INCH W X 18.5 INCH H SIZE; TEXTURED ARCHITECTURAL BRONZE FINISH; UL (CANADA AND US), CSA, ETL (US) APPROVAL; 8 INCH IN-GROUND STAKE, 18 INCH STEM MOUNTING (2)
  • LED (7)
  • Show More...

• Used On

  

  • EMT CONDUIT (6)
  • RIGID CONDUIT (3)
  • Show More...

• Knockouts

  

  • 0 (3)
  • true (6)
  • Show More...

• Minimum Conductor Size

  

  • #14 AWG (Stranded) (6)
  • #6 AWG (Stranded) (3)
  • Show More...

• Cam Code

  

  • 1 (4)
  • 3 (5)
  • Show More...

• Installation

  

  • SCREW (4)
  • Wood Floor, Old/New Work (5)
  • Show More...

• Mounting

  

  • (2) Angled Mid Nails (3)
  • (2) EARS, SNAP BRACKET (1)
  • (2) EARS, WING BRACKET (1)
  • 16 TO 24 INCH ADJUSTABLE BAR HANGER (2)
  • ANGLED MID NAIL (1)
  • BOTTOM (1)
  • CEILING (2)
  • Clip (4)
  • FLUSH (10)
  • Flush,Surface (2)
  • Horizontal, vertical (2)
  • PANEL (1)
  • Screw-In (22)
  • SURFACE (9)
  • Surface Mount (6)
  • UNIVERSAL BAR HANGER (1)
  • VERTICAL (1)
  • WALL (2)
  • Wall or ceiling mount (3)
  • Wing Bracket/Non-Metal Flange Floor/Ceiling Compression (4)
  • Show More...

• Conductor Size

  

  • #1 AWG (4)
  • #2 AWG (4)
  • #4 AWG (4)
  • #6 AWG (3)
  • 1 AWG (1)
  • 1/0 AWG (6)
  • 1/0-1/0-1/0-2 AWG (2)
  • 10 AWG-250 KCMIL (5)
  • 10 AWG-350 KCMIL (2)
  • 14-1/0 AWG (2)
  • 2 AWG (2)
  • 2/0 AWG (5)
  • 2/0-2/0-2/0 AWG (3)
  • 250 kcmil (2)
  • 250 MCM (9)
  • 3/0 AWG (4)
  • 300 kcmil (2)
  • 300 MCM (2)
  • 350 MCM (1)
  • 4 AWG (1)
  • 4/0 AWG (8)
  • 4/0 Concentric (4)
  • 4/0-4/0-4/0 AWG (3)
  • 4/0-4/0-4/0-2/0 AWG (2)
  • 400 MCM (5)
  • 500 kcmil (2)
  • 500 MCM (8)
  • 600 MCM (4)
  • 6-1/0 AWG (2)
  • 750 kcmil (2)
  • 750 MCM (5)
  • Show More...

• Number Of Lamps

  

  • 1 (1)
  • 2 (6)
  • Show More...

• Background Color

  

  • Black (4)
  • White (3)
  • Show More...

• Stranding

  

  • 10 STRANDS (2)
  • 11 STRANDS (PHASE), 9 STRANDS (NEUTRAL) (1)
  • 18 STRANDS (8)
  • 18 STRANDS (PHASE), 11 STRANDS (NEUTRAL) (2)
  • 22 STRANDS (2)
  • 35 STRANDS (6)
  • 58 STRANDS (3)
  • 7 STRANDS (6)
  • 9 STRANDS (PHASE), 7 STRANDS (NEUTRAL) (1)
  • Show More...

• Knockout Size

  

  • 1/2 in (9)
  • 1/2 in (Bottom) (2)
  • 1/2 in (Bottom);1/2 in (Side) (2)
  • 1/2 in (Bottom);2-1/32 in (Bottom);1/2 in (Side);2-1/32 in (End) (2)
  • 1/2 in;21/32 in (2)
  • 1/2 Inch Bottom (3)
  • Show More...

• Cable Entry

  

  • (4) Molded-In Speed Klamps (3)
  • NON METALLIC SPEED CLAMP (2)
  • NON-METALLIC SHEATHED CABLE (1)
  • Non-Metallic Sheathed Cable, PVC Speed Clamp (3)
  • Non-Metallic Sheathed Cable, Speed Clamp (3)
  • Non-Metallic Speed Clamp (8)
  • Show More...

• Hub Size

  

  • 1 (7)
  • 1 in (2)
  • 1/2 (4)
  • 1-1/2 (4)
  • 1-1/2 INCH (1)
  • 1-1/4 (4)
  • 2 (5)
  • 2 in (2)
  • 2 INCH (1)
  • 3/4 (5)
  • 3/4 in (2)
  • 3/4 INCH (2)
  • Show More...

• Length

  

  • 0.31 (2)
  • 0.47 (7)
  • 1 (4)
  • 1 1/2 INCH (1)
  • 1.13 in (2)
  • 1.25 in (2)
  • 1.34 in (3)
  • 1.43 in (2)
  • 1.563 in (2)
  • 1.63 in (2)
  • 1.9 (2)
  • 10 ft (8)
  • 10" (2)
  • 100 (2)
  • 100 ft (2)
  • 1000 ft (22)
  • 1-1/2 in (4)
  • 1-15/16 in (2)
  • 12" (2)
  • 120 (2)
  • 1-27/32 in (3)
  • 1-3/4 in (2)
  • 14 (1)
  • 1-5/8 in (2)
  • 16 (2)
  • 16" (2)
  • 18 in (2)
  • 2 (2)
  • 2 in (9)
  • 2.06 (2)
  • 2.2 (6)
  • 2.4 (2)
  • 2.5 in (2)
  • 2.50 in;63.5 mm (3)
  • 2.55 (5)
  • 2.6 (3)
  • 2000 FT (1)
  • 21 (7)
  • 2-11/16 in (3)
  • 2-11/32 in (2)
  • 2-15/16 in (3)
  • 2500 FT (1)
  • 3 (3)
  • 3.02 (2)
  • 3.19 (2)
  • 3.25 (2)
  • 3.38 INCH (1)
  • 3.63 (2)
  • 3.75 (2)
  • 3.75 in (2)
  • 3.875 INCH (1)
  • 3-1/2 in (2)
  • 3-3/4 in (3)
  • 4 (5)
  • 4 in (13)
  • 4 INCH (1)
  • 4.5 (3)
  • 4.5 INCH (1)
  • 4-11/16 in (3)
  • 4-23/32 in (2)
  • 5 (4)
  • 5.75 INCH (1)
  • 5000 FT (6)
  • 6 (2)
  • 6.25 (3)
  • 6.811 INCH (1)
  • 6-1/2" (2)
  • 6-1/4 (2)
  • 8.12 (2)
  • 8.19 (2)
  • 84 (3)
  • 9-1/2" (2)
  • Interrupt Rating 200 Amp at 250 Vac, 10000 Amp at 125 Vac/Vdc, Material Ceramic Tube, Nickel Plated Brass Endcap (11)
  • Non-Indicating (2)
  • Show More...

• Hub Location

  

  • 90 Degree (4)
  • 90º (2)
  • Show More...

• Cover Type

  

  • Continuous Hinge, Snap Latch (2)
  • PVC Coated (4)
  • Show More...

• Standard Package

  

  • 100 W (2)
  • 12 (2)
  • 18 PER CARTON (1)
  • 2 (3)
  • 20 (2)
  • 24 in (4)
  • 3 in (2)
  • 40 (1)
  • 5 PER CARTON (2)
  • 50 FT (8)
  • 6 (5)
  • 6 PER CARTON (2)
  • CARTON (1)
  • Show More...

• Enclosure Type

  

  • NEMA 4;4X;12;13 (2)
  • NEMA FB-1 (3)
  • Show More...

• Battery Type

  

  • Nickel Cadmium (NiCad);Nickel Metal Hydride (NiMh) (3)
  • Rechargeable NiMH Battery (2)
  • Show More...

• Number Of Knockouts

  

  • 1 (2)
  • 13 (1)
  • 14 (1)
  • 15 (1)
  • 16 (2)
  • 2 (7)
  • 4 (3)
  • 5 (1)
  • 6 (1)
  • 7 (4)
  • 8 (3)
  • 9 (3)
  • Show More...

• Capacity

  

  • 13 cu.in (2)
  • 14 cu.in (2)
  • 15 CU INCH (2)
  • 15.5 cu.in (6)
  • 18 CU INCH (1)
  • 22.5 CU INCH (1)
  • 22.5 Cubic Inch (2)
  • 24.5 Cubic Inch (4)
  • 30.3 cu.in (2)
  • 42 cu.in (2)
  • Show More...

• Sensing Distance

  

  • 225 mm (2)
  • 30 ft;9.1 m (2)
  • 50 mm (3)
  • Show More...

• Thread Length

  

  • 0.406 in (4)
  • 1.25 INCH (1)
  • 1.375 INCH (1)
  • 1.5 INCH (1)
  • 1.75 INCH (1)
  • 7/16 in (3)
  • 9/16 in (3)
  • Show More...

• Wattage

  

  • 0.58W/0.79W (2)
  • 1.4 (2)
  • 1.4 in (2)
  • 4.5 W (1)
  • Show More...

• Outer Diameter

  

  • 1.29 TO 1.315 INCH (1)
  • 1068 Mil (2)
  • 1168 MIL (1)
  • 1199 MIL (1)
  • 1236 MIL (1)
  • 1421 MIL (2)
  • 1540 MIL (1)
  • 24;609.6 (4)
  • 409 Mil (2)
  • 486 Mil (2)
  • 533 Mil (2)
  • 585 Mil (2)
  • 650 MIL (2)
  • 700 Mil (2)
  • 745 MIL (1)
  • 866 Mil (2)
  • 870 MIL (2)
  • 973 MIL (1)
  • Show More...

• Maximum Conductor Size

  

  • #4 (Solid);2/0 AWG (Stranded) (2)
  • #6 AWG (2)
  • #6 AWG (Stranded) (2)
  • 1/0 AWG (1)
  • 2/0 AWG (2)
  • 3/0 AWG (1)
  • Show More...