Narrow By:

• Manufacturer: Greenlee

• Product Type

  

  • 1.000 (34, 6) Conduit (735) Round Die (1)
  • 1.375" HSS Cutter (1)
  • 1.500 (49, 5) Round Conduit Die (1)
  • 1.750" HSS Cutter (1)
  • 1-1/8(1.125) X 7.62(61/62) Naileater Bit (1)
  • 2.00 (61, 5MM) Round Conduit Die (1)
  • 2.00" HSS Cutter (1)
  • 2-1/2 Ips (074MM) Die (1)
  • 2-1/2" Conduit Piston (1)
  • 3.00 (89, 8MM) Round Conduit Die (1)
  • 4.00 (115, 4) Round Conduit Die (1)
  • Arbor, Carbide Cutter Shank (3/8") (1)
  • Arbor, Holesaw 1/2 Shank W/3 Flats (1)
  • Bit, E-Z Bore 2-1/8" (Pop) (1)
  • Bit, Naileater 1/2(.50) X 18.00(66PT-1/2) (1)
  • Bit, Naileater 1-1/8(1.125) X 18.00(66PT) (1)
  • Bit, Spade (1 Long) (33L) (Pop) (1)
  • Bit, Spade (1/2 Long) (33L) (Pop) (1)
  • Bit, Spade (1/2) (33A) (Pop) (1)
  • Bit, Spade (3/4 Long) (33L) (Pop) (1)
  • Bit, Spade (3/4) (33A) (Pop) (1)
  • Bit, Spade (3/8) (33A) (Pop) (1)
  • Bit, Spade (5/8) (Pop) (1)
  • Bit, Spade (7/8 Long ) (33L) (Pop) (1)
  • Bit, Spade (7/8) (33A) (Pop) (1)
  • Bit, Spade-SF Corded (3/8-Pop) (1)
  • Blade PKG, Bandsaw-10/14T (5/PK Pop) (1)
  • Blade PKG, Bandsaw-14/18T (1)
  • Blade Set, Replacement (1)
  • Blade, BX Cutter (1 PK) (1)
  • Blade, Replace (6-3/8 Steel Tooth) (1)
  • Blade-Replace (6-5/8 Steel Tooth) (1)
  • Bushing, Drive SCR 1.125X1.87X1.06 (1)
  • Carbide Cutter (1-3/8") (1)
  • Carbide-Tipped Hole Cutter (1)
  • Conduit Piston (2)
  • Cutter, Carbide (1-1/8"). (1)
  • Cutter, Carbide (7/8"). (1)
  • Deburr Tool (1)
  • Die 1" Conduit (1)
  • Die 1-1/2" Conduit (Pop) (7212SP-1-1/2D) (1)
  • Die 1-1/4" Conduit (Pop) (7212SP-1-1/4D) (1)
  • Die 2" Conduit (Pop) (7212SP-2D) (1)
  • Die 3/4" Conduit (Pop) (7212SP-3/4D) (1)
  • Die, RD .500 Cond (22, 4) (735) (1)
  • Die, RD .750 (28, 2) Conduit (3/4"D/S) (1)
  • Die, RD 1.250 (43, 2) Conduit (735) (1)
  • Die, RD-1.500 Cond PKGD (1)
  • Die, RD-2.000 Cond PKGD (1)
  • Die-RD .500 Cond PKGD (1)
  • Die-RD .750 Cond (Pop) (3/4"D/S) (1)
  • Die-RD 1.000 Cond PKGD (1)
  • Die-RD 1.250 Cond PKGD (1)
  • Draw Stud, Ko Speed (Pop)(7212SP11) (1)
  • Drill Tap Bit (3)
  • Drill/Tap Kit (1)
  • Drill/Tap, 10-24 (1)
  • Drill/Tap, 10-32 (1)
  • Drill/Tap, 5/16-18 (Pop) (1)
  • Drill/Tap, 8-32. (1)
  • Extension, Bit (12) (Pop) (1)
  • Extension, Bit (7/16"X12") (1)
  • Fishline, Conduit-Bonded Nylon (1)
  • Fishline, Conduit-Nylon 45 (1)
  • Hole Cutter Kit (783310057666) (1)
  • Holesaw, Light 6-5/8 Steel Tooth (1)
  • Holesaw, Variable Pitch (1 1/8). (1)
  • Holesaw, Variable Pitch (2") (1)
  • Holesaw, Variable Pitch (3/4") (1)
  • HSS Cutter Kit (1)
  • HSS Large Arbor (1)
  • HSS Large Pilot Drill (1)
  • HSS Small Pilot Drill (1)
  • Nylon Conduit Fishline (1)
  • Oil, Thread Cutting-1 Gal Lite (1)
  • Pilot Drill (1)
  • Pilot Drill 5/8" - 2-1/4" Cutter Size (1)
  • Piston, 2" Conduit (1)
  • Piston, 3" Conduit (1)
  • Piston, 3-1/2" Conduit (1)
  • Piston, 4" Conduit (1)
  • Piston, Boxed-1/2" (1)
  • Piston, Boxed-1-1/2" (1)
  • Piston, Boxed-1-1/4" (1)
  • Punch 1" Cond Speed (Pop) (7212SP-1P) (1)
  • Punch 1-1/2" Cond (Pop) (7212SP-1-1/2P) (1)
  • Punch 1-1/4" Cond Speed (Pop) (1)
  • Punch 2" Conduit (Pop) (7212SP-2P) (1)
  • Punch 3/4" Cond Speed (Pop)(7212SP-3/4P) (1)
  • Quick Cutter Adjustable Holesaw (1)
  • Recessed Light Hole Saw (1)
  • Replacement Kit-Replac Tip Naileater-1" (1)
  • Replacemnt Kit-Replac Tip Naileater-7/8" (1)
  • Screw Anchor Expander (2)
  • Screw, Adaptor-Short (3/8"). (1)
  • Small Arbor (1)
  • Speed Punch Lock (Pop) (SP-Lock) (1)
  • Tape-Measuring 3/16" Poly (21562) (1)
  • Ultra Cutter (2)
  • Show More...

• Brand

  

  • GREENLEE (84)
  • Greenlee Textron (20)
  • Show More...

• Bit Size

  

  • 1/4 in (1)
  • 1/4 in;6.4 mm (1)
  • Show More...

• Shank Diameter

  

  • 1/4 in (3)
  • 3/8 in (1)
  • 7/16 IN (11.100 MM) (1)
  • 7/16 IN. Hex (1)
  • Show More...

• Material

  

  • Carbide Cutter Shank (1)
  • CARBIDE TIP (3)
  • Carbide Tipped (1)
  • Carbon Steel, Nickel Plated (5)
  • COBALT STEEL (1)
  • Flexible Foam (1)
  • For stainless steel, copper, brass and aluminum (1)
  • Hardened Alloy Steel (2)
  • High Speed Steel (14)
  • High Speed Steel Pilot Drill Bit (1)
  • High-Speed Steel (1)
  • Nylon (3)
  • Porcelain Steel (1)
  • Steel (Teeth) (1)
  • Waterproof Polyester (1)
  • Show More...

• Teeth Per Inch

  

  • 14/18 TPI (1)
  • 20 (1)
  • Show More...

• Application

  

  • 5 Piece Quick Change Carbide Tipped Hole Cutter kit cuts stainless steel quickly and easily (1)
  • 6 Piece Ultra Cutter kit for conduit sizes 1/2 - 2 In. (1)
  • Bi-Metal Hole Saw with 1-5/8 In cutting depth allowing cutting on 2x4 studs. Extra-thick backplate minimuzes vibration for smoother, easier cutting. (3)
  • Cut Fast, Accurate, High Quality Holes in Stainless Steel, Copper, Aluminum, Steel (1)
  • Deburr from both sides of any hole greater than 3/4" (1)
  • For 1.000 Nail Eater Auger Bit IN (1)
  • For 1940 Flexible Metal Conduit Cutter (2)
  • For 7/8 Nail Eater Auger Bit IN (1)
  • For Bore Hardwood, Softwood, Plywood And Drywall (10)
  • For Boring Deeper Wood IN (2)
  • For boring fast, clean holes through various wood materials in electrical, plumbing, and remodeling applications (1)
  • For Conduit Measurement (1)
  • For mild steel, copper, brass and aluminum (1)
  • For punching conduit sized holes in mild steel, aluminum, fiberglass, and plastic. (12)
  • For Standard Round Knockout Punch Unit (1)
  • Hole Drilling;Tapping;Deburring/Countersinking (3)
  • Large arbor with pilot drill for 1-3/8 - 2-1/2" cutters (1)
  • Masonry (2)
  • Premium high lubricity oil to make cutting easier and extend life of the tool. (1)
  • Punch mild steel, aluminum, fiberglass and plastic (1)
  • Quick Cutter recessed hole saw. Adjustable in 1/2 In increments for cuts of 2-1/2-7 In (1)
  • Replacement bi-metal band saw blade (1)
  • Replacement blade for Greenlee 35713 (1)
  • Replacement blade for Greenlee 35714 (1)
  • Small arbor with pilot drill for 7/8 - 1-7/32" cutters (1)
  • Stainless steel, mild steel, aluminum, copper, brass, fiberglass and plastics (3)
  • Standard round replacement die for use with standard knockout punches. Use with batter-powered, hydraulic, ratchet or manual drivers. (6)
  • Steel Toothed Blade Recessed Light Hole Saw (2)
  • Use with battery-powered, hydraulic, ratchet or manual drivers. Capacity up to 10 gauge mild steel. Use on mild steel, aluminum, fiberglass and plastic. (7)
  • Use with blower or vacuum power fishing system to start conduit run. (10)
  • Use With Greenlee Arbors #37154, #37155, #37156 And #37157 (1)
  • Use with Greenlee arbors 5/8 - 2-1/4". Split-point tip design eliminates need for center punch and resists walking. (1)
  • Use With Greenlee Bimetal Hole Saws, Recessed Light Hole Saws And Carbide Grit Hole Saws (Carbide-Tipped Pilot Drill Sold Separately), Can Be Used With Greenlee No 901 Or 904 Bit Extensions, 1-1/4 IN - 6.000 IN (31.800 - 152.400 MM) Hole Saws And All Gree (1)
  • Use with Greenlee large arbor 925-022 (1)
  • Use with Greenlee small arbor 925-011 (1)
  • Show More...

• Overall Length

  

  • 16.000 IN (406.400 MM) (4)
  • 4-1/8 in;104.8 mm (1)
  • 5 IN. (127MM) (1)
  • 6-1/4 IN (158.800 MM) (6)
  • 7.625 in (1)
  • 9.01 in (1)
  • Show More...

• Package Quantity

  

  • 1 BX (2)
  • 1 ct (6)
  • 5 PK;1 CT (5)
  • Show More...

• Weight

  

  • 0.03 lb (2)
  • 0.05 lb (1)
  • 0.06 lb (1)
  • 0.08 lb (3)
  • 0.090 LB (40.800 GM) (2)
  • 0.1 lb (1)
  • 0.100 LB (45.300 GM) (3)
  • 0.120 LB (54.400 GM) (1)
  • 0.2 lb;91 g (1)
  • 0.330 LB (150.000 GM) (2)
  • 0.4 lb;0.2 kg (1)
  • 0.400 LB (181.000 GM) (1)
  • 0.500 LB (227.000 GM) (1)
  • 0.550 LB (250.000 GM) (1)
  • 0.6 lb;0.3 kg (1)
  • 0.7 lbs. (0.32 kg) (1)
  • 0.700 LB (318.000 GM) (1)
  • 0.900 LB (409.000 GM) (1)
  • 1.2 lb;0.54 kg (2)
  • 1.400 LB (636.000 GM) (1)
  • 2.300 LB (1044.000 GM) (1)
  • 2.900 LB (1316.000 GM) (1)
  • 4.400 LB (2.000 KG) (1)
  • Show More...

• Category Description

  

  • ANCHORS & ANCHOR KITS (2)
  • BITS, BLADES, AND HOLE SAWS (26)
  • HAND TOOLS (50)
  • PULL LINE, ROPE, CARRIERS (3)
  • Screws, Bolts, Staples, Jack Chains, Washers & TY-Raps (1)
  • TOOL BAG/POUCHES (22)
  • Show More...

• Shank Type

  

  • Hexagonal (10)
  • QUICK CHANGE (1)
  • Show More...

• Type

  

  • Adustable recessed hole saw cutter (1)
  • Bi-Metal (1)
  • Bi-Metal Hole Saw (3)
  • Carbide-Tipped (1)
  • Carbide-Tipped Hole Cutter (3)
  • Foam conduit piston for IMC and Rigid (4)
  • Foam piston for all conduit types (6)
  • Hex Shank (1)
  • Large arbor with split point pilot drill to prevent walking (1)
  • Light Cutting / Threading Oil (1)
  • Pilot drill bit (3)
  • Pilot, Replacement (1)
  • QUICK CHANGE (1)
  • Quick Change Carbide Tipped Hole Cutter (1)
  • Recessed Light Hole Saws (4)
  • Replacement (2)
  • Replacement Die (1)
  • Replacement Die for SPEED PUNCH® Knockout Punches (3)
  • Replacement Die for standard round knockout punches (7)
  • Replacement Draw Stud for SPEED PUNCH® Knockout Punches (1)
  • Replacement Punch for SPEED PUNCH® Knockout Punches (2)
  • Replacement Speed Lock for SPEED PUNCH® knockout units (1)
  • Replacement Standard Round Die (6)
  • Replacement, Round (1)
  • Self Feeding (1)
  • Self-Feed Wood Boring Bit (1)
  • Small arbor with split point pilot drill to prevent walking (1)
  • SPEED PUNCH® replacement die (2)
  • SPEED PUNCH® replacement punch (3)
  • Ultra Cutter Hole Saw (5)
  • Ultra Cutter Hole Saw Kit (1)
  • Show More...

• Size

  

  • #10 (2)
  • #6 (1)
  • #8 (1)
  • 1 GAL (1)
  • 1 in (3)
  • 1/2 in (2)
  • 1/2 x .02 x 44-7/8" (1)
  • 1/4 in (1)
  • 1/4 IN Hex Shank (1)
  • 1-1/2 in (2)
  • 1-1/4 in (3)
  • 1-1/8 In (1)
  • 1-3/8 In (1)
  • 2 in (3)
  • 3/4 in (3)
  • 3/4 x 4.77 In (1)
  • 3/8 in (1)
  • 5/6 IN (1)
  • 6 piece, 6-32 to 1/4-20 (1)
  • 7/16 IN Hex Shank (1)
  • 7/8 IN (2)
  • Replacement Die for 1-11/16 In Standard Round Knockout (1)
  • Replacement Die for 1-3/8 In Standard Round Knockout (1)
  • Replacement Die for 2-1/4 In Standard Round Knockout (1)
  • Replacement Die for 2-3/8 In Standard Round Knockout (1)
  • Replacement Die for 2-7/8 In Standard Round Knockout (1)
  • Replacement Die for 3/4 In Standard Round Knockout (1)
  • Replacement Die for 3-1/2 In Standard Round Knockout (1)
  • Replacement Die for 5/8 In Standard Round Knockout (1)
  • Show More...

• Length

  

  • 12.000 IN (2)
  • 2150 FT (1)
  • 2200 FT (1)
  • 2750 FT (1)
  • 3000.000 FT (914.000 M) (1)
  • Show More...

• Capacity

  

  • 1 In (1)
  • 1/2 In (1)
  • 1-1/2 In (1)
  • 1-1/4 In (1)
  • 2 In (1)
  • 2-1/2 In (1)
  • 3 In (1)
  • 3/4 In (1)
  • 3-1/2 In (1)
  • 4 In (1)
  • Show More...