Narrow By:

• Manufacturer: AppletonOz

• Product Type

  

  • 1 In Beam Clamp Assy (1)
  • 1 In Combination Coupling (1)
  • 1 In Combo A&BB BSHG (1)
  • 1 In Cond Clamp Mall Iron (1)
  • 1 In CPLG No THRD RGD Cond (1)
  • 1 In Edge Type CLP (1)
  • 1 In Emt Comp Conn Insul Steel (1)
  • 1 In Emt Comp CPLG Usa (1)
  • 1 In Emt SSCR Conn (1)
  • 1 In Emt SSCR Conn Insul Steel (1)
  • 1 In GNDG BSHG THD (1)
  • 1 In Inslg BSHG Male THRD (1)
  • 1 In Insul GNDG BSHG Alum (1)
  • 1 In Iron Union (1)
  • 1 In Phenolic CPLG (1)
  • 1 In RGD Clampback Mall Iron (1)
  • 1 In Right Angle Type CLP (1)
  • 1 In RT Emt CPLG Green Nut (1)
  • 1 In Sealing LKNT (1)
  • 1 In THD RGD Cond Hub STL (1)
  • 1 In THRD Inslg BSHG (1)
  • 1 Union Connector Type Unf (2)
  • 1/2 Emt - 1/2 Flex Comb CPLG Comp/SS (1)
  • 1/2 In 2 Hole Strap STL (1)
  • 1/2 In 3 Piece CPLG (1)
  • 1/2 In 90 Deg Bushed Elb (1)
  • 1/2 In 90D Short Elb Conn (1)
  • 1/2 In Combination Coupling (2)
  • 1/2 In Cond Clamp Mall Iron (1)
  • 1/2 In Conn No THRD RGD Cond (1)
  • 1/2 In CPLG No THRD RGD Cond (1)
  • 1/2 In Edge Type CLP (1)
  • 1/2 In Emt SSCR CPLG (1)
  • 1/2 In Inslg BSHG Male THRD (1)
  • 1/2 In Nail Strap STL (1)
  • 1/2 In Offset Nipple Iron (1)
  • 1/2 In Phenolic CPLG (1)
  • 1/2 In Pulling Elb ZNC D/C (1)
  • 1/2 In RT Emt Conn Green Nut (1)
  • 1/2 In THRD Inslg BSHG (1)
  • 1/2 In Union (1)
  • 1/2 Union Connector Type (1)
  • 1/2&3/4 In Beam Clamp Assy (1)
  • 1-1/2 Aluminum Watertight Hubs (1)
  • 1-1/2 In 3 Piece CPLG (1)
  • 1-1/2 In 3/4 O/S Nip ZNC D/C (1)
  • 1-1/2 In Cond Clamp Mall Iron (1)
  • 1-1/2 In Conn No THRD RGD Cond (1)
  • 1-1/2 In CPLG No THRD RGD Cond (1)
  • 1-1/2 In Edge Type CLP (1)
  • 1-1/2 In Emt Comp Conn Insul Steel (1)
  • 1-1/2 In Emt SSCR Conn (1)
  • 1-1/2 In Emt SSCR Conn Insul Steel (1)
  • 1-1/2 In Emt SSCR CPLG (1)
  • 1-1/2 In GNDG BSHG THD (1)
  • 1-1/2 In Inslg BSHG Male THRD (1)
  • 1-1/2 In Insul GNDG BSHG Alum (1)
  • 1-1/2 In Parallel Type CLP (1)
  • 1-1/2 In Phenolic CPLG (1)
  • 1-1/2 In RGD Clampback (1)
  • 1-1/2 In Right Angle Type CLP (1)
  • 1-1/2 In THRD Inslg BSHG (1)
  • 1-1/2 Union Conn Type Unf (1)
  • 1-1/2 Union Conn Type Uny (1)
  • 1-1/2 X 1 In STL RDC WSHR (1)
  • 1-1/2 X 1/2 In STL RDC WSHR (1)
  • 1-1/2 X 1/2 RDC BSHG STL (1)
  • 1-1/2 X 3/4 In STL RDC WSHR (1)
  • 1-1/2 X 3/4 RDC BSHG STL (1)
  • 1-1/2 ZDC Water Tight Hubs (1)
  • 1-1/4 Aluminum Watertight Hubs (1)
  • 1-1/4 In 3 Piece CPLG (1)
  • 1-1/4 In 3/4 O/S Nip ZNC D/C (1)
  • 1-1/4 In 90 Deg Fem PLG Elb (1)
  • 1-1/4 In Cond Clamp Mall Iron (1)
  • 1-1/4 In Conn No THRD RGD Cond (1)
  • 1-1/4 In CPLG No THRD RGD Cond (1)
  • 1-1/4 In Emt Comp Conn Insul Steel (1)
  • 1-1/4 In Emt SSCR Conn (1)
  • 1-1/4 In Emt SSCR Conn Insul Steel (1)
  • 1-1/4 In Emt SSCR CPLG (1)
  • 1-1/4 In Inslg BSHG Male THRD (1)
  • 1-1/4 In Insul GNDG BSHG Alum (1)
  • 1-1/4 In RGD Clampback (1)
  • 1-1/4 In Right Angle Type CLP (1)
  • 1-1/4 In THRD Inslg BSHG (1)
  • 1-1/4 Union Conn Type Uny (1)
  • 1-1/4 X 1 In STL RDC WSHR (1)
  • 1-1/4 X 1/2 In STL RDC WSHR (1)
  • 1-1/4 X 1/2 RDC BSHG STL (1)
  • 1-1/4 X 3/4 In STL RDC WSHR (1)
  • 1-1/4 X 3/4 RDC BSHG STL (1)
  • 1-1/4 ZDC Water Tight Hubs (1)
  • 2 1/2 to 1/2 Reducer Washer (1)
  • 2 1/2 to 3/4 Reducing Washer (1)
  • 2 In 3 Piece CPLG (1)
  • 2 In Cond Clamp Mall Iron (1)
  • 2 In Cond HGR Assy (1)
  • 2 In CPLG No THRD RGD Cond (1)
  • 2 In Edge Type CLP (1)
  • 2 In Emt Comp Conn Insul Steel (1)
  • 2 In Emt SSCR Conn (1)
  • 2 In Emt SSCR Conn Insul Steel (1)
  • 2 In Emt SSCR CPLG (1)
  • 2 In GNDG BSHG THD (1)
  • 2 In Inslg BSHG Male THRD (1)
  • 2 In Insul GNDG BSHG Alum (1)
  • 2 In Parallel Type CLP (1)
  • 2 In Phenolic CPLG (1)
  • 2 In RGD Clampback (1)
  • 2 In THRD Inslg BSHG (1)
  • 2 Union Connector Type Uny (1)
  • 2 X 1 In STL RDC WSHR (1)
  • 2 X 1/2 RDC BSHG STL (1)
  • 2 X 3/4 In STL RDC WSHR (1)
  • 2 X 3/4 RDC BSHG STL (1)
  • 2-1/2 Aluminum Watertight Hub (1)
  • 2-1/2 In 3 Piece CPLG (1)
  • 2-1/2 In Combo A&BB BSHG (1)
  • 2-1/2 In Emt Comp Conn (1)
  • 2-1/2 In Emt Comp CPLG (1)
  • 2-1/2 In Emt SSCR Conn (1)
  • 2-1/2 In Emt SSCR CPLG (1)
  • 2-1/2 In Inslg BSHG Male THRD (1)
  • 2-1/2 In Sealing LKNT (1)
  • 2-1/2 In THRD Inslg BSHG (1)
  • 2-1/2 ZDC Water Light Hubs (1)
  • 3 1/2 to 2 1/2 Reducing Washer (1)
  • 3 1/2 to 2 Reducing Washer (1)
  • 3 1/2 to 3 Reducing Washer (1)
  • 3 Aluminum Watertight Hub (1)
  • 3 In 3 Piece CPLG (1)
  • 3 In Emt Comp CPLG (1)
  • 3 In Emt SSCR Conn (1)
  • 3 In Emt SSCR Conn Insul Steel (1)
  • 3 In Emt SSCR CPLG (1)
  • 3 In Inslg BSHG Male THRD (1)
  • 3 In THRD Inslg BSHG (1)
  • 3 to 1 Reducing Washer (1)
  • 3 to 2 1/2 Reducing Washer (1)
  • 3 to 2 Reducing Washer (1)
  • 3/4 In 90 Deg Fem PLG Elb (1)
  • 3/4 In Cond BSHG Irong (1)
  • 3/4 In Cond Clamp Mall Iron (1)
  • 3/4 In Emt 1 Hole Strap STL (1)
  • 3/4 In Emt Comp Conn Insul Steel (1)
  • 3/4 In Emt Comp CPLG ZNC D/C (1)
  • 3/4 In Emt SSCR Conn Insul Steel (1)
  • 3/4 In Inslg BSHG Male THRD (1)
  • 3/4 In Insul GNDG BSHG Alum (1)
  • 3/4 In Nail Strap STL (1)
  • 3/4 In Offset Nipple Iron (1)
  • 3/4 In Parallel Type CLP (1)
  • 3/4 In Phenolic CPLG (1)
  • 3/4 In Pulling Elb ZNC D/C (1)
  • 3/4 In RDG Clampback (1)
  • 3/4 In THRD Inslg BSHG (1)
  • 3/4 Right Angle Type CLP (1)
  • 3/4 Union Connector Type Unf (1)
  • 3/8 In LKNT Steel (1)
  • 3-1/2 In 3 Piece CPLG (1)
  • 3-1/2 In Emt SSCR Conn (1)
  • 4 Aluminum Watertight Hub (1)
  • 4 In 3 Piece CPLG (1)
  • 4 In Emt Comp Conn (1)
  • 4 In Emt Comp CPLG (1)
  • 4 In Emt SSCR Conn (1)
  • 4 In Emt SSCR Conn Insul Steel (1)
  • 4 In Emt SSCR CPLG (1)
  • 4 In Inslg BSHG Male THRD (1)
  • 4 In Insul GNDG BSHG Alum (1)
  • 4 In THRD Inslg BSHG (1)
  • 4 to 3 1/2 Reducing Washer (1)
  • 5 In Inslg BSHG Male THRD (1)
  • 5 In THRD Inslg BSHG (1)
  • 90° Capped Elbow (2)
  • 90°Capped Elbow (2)
  • Beam Clamp (2)
  • Coupling (3)
  • Emt Compression Connector (8)
  • Emt Compression Coupling (7)
  • Emt Set Screw Connector (2)
  • Emt Set Screw Coupling (3)
  • Multigang Switch Box (1)
  • Plastic Bushing (1)
  • Plate Sfty 1/16X1-1/2X2-1/2 (1)
  • Plug (1)
  • RDC Bush Alum 1 to 1/2 In NPT (1)
  • RDC Bush Alum 1-1/2TO1-1/4 In (1)
  • RDC Bush Alum 1-1/4TO3/4IN NPT (1)
  • RDC Bush Alum 2 to 1 In NPT (1)
  • RDC Bush Alum 2TO1-1/2 In NPT (1)
  • RDC Bush Mall 2-1/2TO1 In NPT (1)
  • RDC Bush Mall 2-1/2TO2 In NPT (1)
  • RDC Bush Mall 3 to 2 In NPT (1)
  • RDC Bush Mall 3-1/2TO2-1/2 In (1)
  • RDC Bush Mall 3TO2-1/2 In NPT (1)
  • RDC Bush Mall 4TO3 In NPT (1)
  • RDC Bush STL 1 to 3/4 In NPT (1)
  • RDC Bush STL 1/2TO3/8 In NPT (1)
  • RDC Bush STL 1-1/2TO1 In NPT (1)
  • RDC Bush STL 1-1/2TO1-1/4 In (1)
  • RDC Bush STL 1-1/4TO1 In NPT (1)
  • RDC Bush STL 1-1/4TO1/2 In NPT (1)
  • RDC Bush STL 1-1/4TO3/4 In NPT (1)
  • RDC Bush STL 2TO1/2 In NPT (1)
  • RDC Bush STL 2TO1-1/2 In NPT (1)
  • RDC Bush STL 2TO1-1/4 In NPT (1)
  • RDC Bush STL 3/4TO1/2 In NPT (1)
  • Reducing Bushing (2)
  • Reducing Washer (1)
  • Rigid Conduit Compression Connector (3)
  • Rigid Conduit Reducing Bushing (2)
  • Switch Box Support (1)
  • Union (3)
  • Union X-Proof 3/4 Male-Female (1)
  • Watertight Hub (10)
  • Show More...

• Brand

  

  • Appleton (186)
  • Appleton/Oz Gedney (10)
  • APPOZGCOMM (14)
  • O-Z/GEDNEY (43)
  • Show More...

• Trade Size

  

  • 0.5 (4)
  • 0.75 (3)
  • 1 (17)
  • 1 in (3)
  • 1 x 3/4 in (1)
  • 1.25 (5)
  • 1.5 (5)
  • 1/2 (8)
  • 1/2 in (8)
  • 1-1/2 (4)
  • 1-1/2 in (3)
  • 1-1/4 (3)
  • 1-1/4 in (2)
  • 2 (10)
  • 2 in (3)
  • 2 x 1-1/2 in (1)
  • 2.5 (4)
  • 3 (5)
  • 3 in (2)
  • 3.5 (2)
  • 3/4 (6)
  • 3/4 in (12)
  • 3/8 in (1)
  • 3-1/2 in (2)
  • 3-1/2 to 3 in (1)
  • 4 (6)
  • 4 in (1)
  • Show More...

• Finish

  

  • Aluminum (5)
  • Castings: Hot Dip;Hardware: Mechanically Galvanized (11)
  • Clamp: Hot Dip Galvanized, Screw: Zinc Electroplated (1)
  • Electro Zinc Plated (1)
  • Galvanized (9)
  • HOT DIPPED GALVANIZED (6)
  • Natural (1)
  • Pre-Galvanized Zinc (6)
  • Triple-Coat (Zinc Electroplate, Chromate And Epoxy Powder Coat) (6)
  • Unfinished (10)
  • Zinc Electro Plated (33)
  • Zinc Electroplate (21)
  • Zinc Electroplated Body, Tin Plated Lug (3)
  • Zinc Plated (23)
  • Show More...

• Model

  

  • 5000S (2)
  • 6000S (7)
  • BH (1)
  • ELBY (2)
  • HI (1)
  • HUB (6)
  • KO (1)
  • NTC (3)
  • NTCC (1)
  • RB (2)
  • RWN (1)
  • TC-500 (1)
  • TPC (2)
  • UNF (1)
  • UNY (2)
  • Show More...

• Shape

  

  • Angle (2)
  • Straight (2)
  • Show More...

• Length

  

  • 0.84 in (1)
  • 0.94 in (1)
  • 1.03 in (2)
  • 1.03 in;26.2 mm (1)
  • 1.09 in;27.7 mm (1)
  • 1.12 in (1)
  • 1.13 in (1)
  • 1.25 in (1)
  • 1.26 in (1)
  • 1.36 (1)
  • 1.38 in;35.1 mm (1)
  • 1.41 (2)
  • 1.47 (3)
  • 1.50 in;38.1 mm (1)
  • 1.51 (1)
  • 1.56 in (2)
  • 1.63 in (1)
  • 1.63 in;41.4 mm (1)
  • 1.66 in;42.2 mm (1)
  • 1.70 in;43.2 mm (1)
  • 1.72 (2)
  • 1.75 (1)
  • 1.78 (1)
  • 1.81 in (1)
  • 1-1/2 (1)
  • 1-3/4 (1)
  • 1-3/8 (1)
  • 2 (2)
  • 2 in (1)
  • 2 in;50.8 mm (1)
  • 2.00 (1)
  • 2.12 (1)
  • 2.13 (1)
  • 2.13 in (1)
  • 2.147 (1)
  • 2.15 (1)
  • 2.16 in (1)
  • 2.19 (1)
  • 2.25 in (1)
  • 2.27 in (1)
  • 2.31 in (1)
  • 2.38 (1)
  • 2.44 (1)
  • 2.5 (1)
  • 2.5 in (1)
  • 2.50 in;63.5 mm (3)
  • 2.54 (2)
  • 2.56 (1)
  • 2.62 (1)
  • 2.88 (1)
  • 2.88 in (1)
  • 2-1/16 in (1)
  • 2-1/2 (1)
  • 2-1/8 (1)
  • 2-3/4 (1)
  • 3 in (1)
  • 3.13 (1)
  • 3.25 (1)
  • 3.28 (1)
  • 3.31 (1)
  • 3.63 (3)
  • 3.67 (1)
  • 3.75 (1)
  • 3.88 (1)
  • 3.94 (1)
  • 3-1/4 (1)
  • 4 (2)
  • 4.06 (1)
  • 4.25 (1)
  • 4.5 (1)
  • 4.75 in;120.7 mm (1)
  • 5 (1)
  • 5.11 in;129.8 mm (1)
  • Show More...

• Width

  

  • 0.37 in (1)
  • 0.94 (1)
  • 1.44 in;36.6 mm (1)
  • 1.53 (2)
  • 1.67 in;42.4 mm (1)
  • 1.81 (1)
  • 1.88 (1)
  • 1.99 in;50.5 mm (1)
  • 2 (1)
  • 2.25 in;57.2 mm (1)
  • 3.23 in;82.0 mm (1)
  • 3.52 (1)
  • 6-7/8 in (1)
  • Show More...

• For Use With

  

  • Aluminum or Steel Electrical Metallic Tubing (1)
  • Connect Rigid and IMC Conduit to a Threadless Opening in an Enclosure (6)
  • Connecting Conduit to Conduit (3)
  • EMT Conduit (9)
  • EMT Conduit;Boxes and Enclosures (8)
  • EMT Raceways to Boxes and Enclosures (2)
  • Joining Lengths of Steel EMT to Rigid Metal/IMC Conduit (1)
  • Rigid and IMC Conduit (6)
  • Rigid Conduit;IMC Conduit (2)
  • Rigid/Imc Conduit (1)
  • Secure and Terminate Steel EMT to Knockouts and Concrete Tight Box (2)
  • Sheet Metal Box and Enclosure/Cabinet (1)
  • Threaded Metal Conduit (2)
  • Threadless Rigid Metal Conduit/IMC (4)
  • Show More...

• Connection Size

  

  • End 1: 1.57 in;39.9 mm;End 2: 1.30 in;33.0 mm (1)
  • End 1: 2.13 in;54.1 mm;End 2: 1.88 in;47.8 mm (1)
  • Show More...

• Application

  

  • Beam Clamp: Provides Support For Conduit Hanging Systems.Two-Hole Straps: Used to Support Rigid Metal Conduit And Imc.Clamp Backs: Provide Spacing From Mounting Surface When Used With Pipe Clamps (1)
  • Commercial;Industrial;Dry Location (2)
  • Concretetight or Dry Location (1)
  • Electrical (1)
  • EMT Raceway;Wet Locations (7)
  • For Box To Box Connection Of Knockouts (2)
  • For Connecting Conduit To Conduit (5)
  • For Connecting Conduit To Enclosure (9)
  • For Connecting Threaded Rigid Conduit Or IMC To Box Or Enclosure (1)
  • For EMT To Flexible Metal Conduit (2)
  • For Joining Lengths Of Steel EMT To Rigid Metal Conduit Or IMC (6)
  • For Joining Lengths Of Steel EMT To Various Raceway Systems (1)
  • For Reducing Conduit Entries To A Smaller Size In Threaded Rigid And IMC Conduit Systems (22)
  • For Rigid Conduit (4)
  • For Rigid Conduit And IMC (6)
  • For Rigid, IMC And EMT (7)
  • for Single Line Conduit (2)
  • For Supporting Conduit Hanging Systems (1)
  • For Threaded Rigid Conduit And IMC (27)
  • For Use To Connect Conduit To Enclosure At 90 DEG Angle (1)
  • For Use To Connect Rigid Metal Conduit Or IMC To A Threadless Opening In An Enclosure (3)
  • For Use To Secure And Terminate Steel EMT To Knockouts And Concrete Tight Box (5)
  • For Use With Locknut To Terminate Rigid Metal Conduit Or IMC To A Box Or Enclosure (1)
  • For Use With Threaded Rigid Metal Conduit and IMC (5)
  • For Used To Reduce The Size Of A Knockout Or Slip Hole (6)
  • For Used To Secure Rigid Metal Conduit, IMC Or EMT To Threaded Rod, Supports Or Direct To Mounting Surface (1)
  • For Used To Support Runs Of RMC, IMC And EMT (11)
  • General Purpose (1)
  • Hazardous Location (2)
  • Hazardous Locations (3)
  • Installed over areas in wooden structures where cables are runt to protect cable insulation from damage (1)
  • Provides a transition from EMT to flexible metal conduit (1)
  • Provides threaded coupling between lengths of conduit and IMC elbows, where neither can be rotated (8)
  • Provides Threaded Coupling Between Lengths of Rigid Conduit and IMC Conduit Elbows, Where Neither Can Be Rotated (2)
  • RB Reducing Bushings are Designed to Reduce Conduit Entriesto a Smaller Size and are Used in Threaded Rigid and IMC Conduit Systems (1)
  • Reduce Knockout Size On Sheet Metal Box and Enclosure/Cabinet (1)
  • Sealing locknuts provide a raintight seal when securing threaded conduit or connectors with tapered or straight thread to a knockout or unthreaded slip hole. (2)
  • Serves as Pulling Fitting;Makes 90° Bend in Conduit Run (2)
  • Snap-on type two hole straps for rigid conduit and IMC are used where higher load bearing supports are desired. (1)
  • To Close Unused Opening or Knockout in Sheet Metal Box, Enclosure/Cabinet (1)
  • To ground and secure EMT raceway sections together in wet locations (5)
  • To ground and secure EMT Raceways sections together (7)
  • To ground and secure EMT Raceways to boxes and enclosures (32)
  • To ground and secure EMT Raceways to boxes and enclosures in wet locations (1)
  • To join lengths of steel EMT for concretetight, dry or damp locations (1)
  • To Reduce the trade size of a tapered entry (7)
  • To secure EMT to wooden mounting structure;Used in place of one hole strap (2)
  • To Support Attachment of Boxes in Drywall and Paneling. Where There are no Means of Attaching the Box to a Mounting Structure (1)
  • Used to connect rigid metal conduit or IMC to a threqadless opening in an enclosure. (3)
  • Used to Connect Rigid or IMC Conduit to a Threadless Opening in an Enclosure (9)
  • Used to reduce a knockout or sliphole in a sheet metal enclosure to a smaller trade size. (8)
  • Wet/Dry Locations;Indoor/Out;Hazardous Locations (1)
  • Show More...

• Connection Type

  

  • Compression (1)
  • Female (2)
  • NPT (1)
  • Rigid (1)
  • Threaded (5)
  • Show More...

• Hub Size

  

  • 1 in (1)
  • 1.56 in (1)
  • 1.81 in (1)
  • 1/2 in (1)
  • 2 in (1)
  • 2.13 in (1)
  • 3.38 in (1)
  • 3/4 in (1)
  • 4.50 in (1)
  • 5.75 in (1)
  • Show More...

• Package Quantity

  

  • 1 PK;10 CT (1)
  • 1 PK;2 CT (1)
  • 1 PK;20 CT (2)
  • 1 PK;25 CT (1)
  • 1 PK;5 CT (3)
  • 10 CT;50 PK (2)
  • 10 PK;2 CT (2)
  • 100 PK;25 CT (2)
  • 1000 PK;100 CT (1)
  • 125 PK;25 CT (4)
  • 2 CT;1 PK (1)
  • 20 CT;1 PK (2)
  • 200 PK;20 CT (2)
  • 200 PK;25 CT (1)
  • 200 PK;50 CT (2)
  • 25 CT;1 PK (3)
  • 25 PK;125 CT (2)
  • 25 PK;5 CT (3)
  • 250 PK;50 CT (1)
  • 5 CT (1)
  • 5 CT;1 PK (4)
  • 5 CT;25 PK (1)
  • 5 CT;50 PK (1)
  • 5 PK;1 CT (1)
  • 50 CT;200 PK (1)
  • 50 PK;10 CT (4)
  • 50 PK;5 CT (1)
  • 500 PK;50 CT (1)
  • Show More...

• Enclosure Type

  

  • Class I Div 1 and 2 Group B, Class I Div 1 and 2 Group C D, Class II Div 1 and 2 Group E F G, Class III (2)
  • Class I Div 2, Class II Div 1 and 2, Class III (2)
  • Class I, Groups A, B, C, D;Class II, Groups E, F, G and Class III (3)
  • NEMA 2/3/3R/4/4X/5/12/13;NEMA FB-1 (4)
  • Show More...

• Weight

  

  • 0.01 lb/EA (1)
  • 0.02 lb/EA (1)
  • 0.0300 lb/EA (1)
  • 0.04 lb (1)
  • 0.04 lb/EA (1)
  • 0.0400 lb/EA (1)
  • 0.07 lb (1)
  • 0.09 lb/EA (1)
  • 0.12 lb/EA (1)
  • 0.14 lb/EA (2)
  • 0.17 lb/EA (1)
  • 0.18 lb/EA (1)
  • 0.21 lb/EA (1)
  • 0.26 lb/EA (1)
  • 0.30 lb/EA (1)
  • 0.35 lb/EA (1)
  • 0.38 lb/EA (1)
  • 0.39 lb/EA (1)
  • 0.4 lb (1)
  • 0.4 lb/EA (1)
  • 0.42 lb (1)
  • 0.52 lb/EA (1)
  • 0.68 lb (1)
  • 0.7299 lb/EA (1)
  • 0.86 lb/EA (1)
  • 0.89 lb/EA (1)
  • 1.05 lb/EA (1)
  • 10.00 lb/100;4.54 kg/100 (1)
  • 104.00 lb;47.17 kg (1)
  • 117.0 lb/100;53.07 kg per 100 Pieces (1)
  • 124.00 lb/100;56.25 kg/100 (1)
  • 149.00 lb;67.59 kg (1)
  • 15.00 lb/100;6.80 kg/100 (2)
  • 19.00 lb;8.62 kg (1)
  • 2.18 lb/EA (1)
  • 2.65 lb/EA (1)
  • 21 lb/100;9.53 kg/100 (1)
  • 25.00 lb;11.34 kg (1)
  • 265 lb/100;120.20 kg/100 (1)
  • 32 lb/100;14.51 kg/100 (1)
  • 350.00 lb;158.76 kg (1)
  • 39 lb;17.69 kg (1)
  • 39.00 lb;17.69 kg (1)
  • 425 lb/100;192.78 kg/100 (1)
  • 72 lb/100;32.66 kg/100 (1)
  • 83 lb/100 (1)
  • 85 lb/100;38.56 kg/100 (1)
  • 88.00 lb;39.92 kg (1)
  • 92.00 lb pe 100 Pieces;41.7 kg per 100 Pieces (1)
  • Show More...

• Thread Length

  

  • 0.64 in (2)
  • 0.78 in (2)
  • 1 in (1)
  • 1.06 in (2)
  • 11/16 in (1)
  • 3/8 in (2)
  • 5/8 in (2)
  • 7/16 in (3)
  • 7/8 in (1)
  • 9/16 in (3)
  • Show More...

• Height

  

  • 0.13 (1)
  • 0.22 (1)
  • 0.37 in;9.4 mm (1)
  • 0.45 (1)
  • 1.27 in;32.3 mm (1)
  • 2.06 in;52.3 mm (1)
  • 4-9/16 in (1)
  • Show More...

• Knockout Size

  

  • 0.88 in (1)
  • 1.13 in (1)
  • 1.38 in (1)
  • 1/2 in (1)
  • 2.50 in (1)
  • 3.63 in (1)
  • 4.63 in (1)
  • Show More...

• Diameter

  

  • 0.70 in;17.8 mm (1)
  • 0.84 in;21.3 mm (2)
  • 0.88 in;22.4 mm (Inside);1.75 in;44.5 mm (Outside) (1)
  • 1.03 in;26.2 mm (1)
  • 1.06 in (1)
  • 1.08 in (1)
  • 1.08 in;27.4 mm (1)
  • 1.25 in (1)
  • 1.31 in (1)
  • 1.31 in;33.3 mm (1)
  • 1.38 in;35.1 mm (1)
  • 1.44 in (1)
  • 1.53 in (1)
  • 1.56 in (1)
  • 1.57 in;39.9 mm (1)
  • 1.63 in (2)
  • 1.69 in (1)
  • 1.69 in;42.9 mm (1)
  • 1.75 in (2)
  • 1.88 in (1)
  • 1.94 in;49.3 mm (1)
  • 2 in (3)
  • 2.13 in;54.1 mm (1)
  • 2.19 in (1)
  • 2.21 in (1)
  • 2.38 in;60.5 mm (1)
  • 2.69 in (1)
  • 3.25 in (1)
  • 3-1/4 in (1)
  • 4 in (1)
  • 4.25 in;108.0 mm (1)
  • 4.38 in (1)
  • 4-1/2 in (1)
  • 5.47 in (1)
  • Show More...

• Cable Size

  

  • 1 (1)
  • 1/2 (1)
  • 1-1/2 (1)
  • 1-1/4 (1)
  • 2 (1)
  • 3/4 (1)
  • Show More...

• Special Features

  

  • 1 IN Trade Size Connector for EMT Conduit, Set Screw Type, Male Hub Threads NPS, Body Length 1.19 IN, Max. Dia. 1.31 IN,Thread Length 0.44 IN, Concretetight when taped, Male Hub Threads - NPS (1)
  • 1 IN Trade Size Connector for EMT Conduit, Set Screw Type, Male Hub Threads NPS, Body Length 1.19 IN, Max. Dia. 1.31 IN,Thread Length 0.44 IN, Concretetight when taped, Male Hub Threads - NPS, Insulated Throat (1)
  • 1 1/32 IN Dia X 1 1/4 IN Length, 7/16 IN Thread Length, Concretetight (1)
  • 1 1/4 IN Dia X 1 9/16 IN Length, 9/16 IN Thread Length, Concretetight (1)
  • 1 13/16 IN Dia X 2 IN Length, 9/16 IN Thread Length, Concretetight (1)
  • 1 IN Compression Coupling, Made in USA, Concretetight, Raintight (wet locations) Canada (1)
  • 1.03 IN Dia X 0.37 IN Thick, For Threaded Conduit/Connector (1)
  • 1.19 IN Width X 2.07 IN Height, For EMT (1)
  • 1.23 IN Width X 2.07 IN Height, For EMT (1)
  • 1.62 IN Dia X 0.71 IN Length, For Rigid Conduit And IMC (1)
  • 1.62 IN Dia X 0.82 IN Length, For Rigid Conduit And IMC (1)
  • 1.84 IN Dia X 2.9 IN Length, For Cabinets, Enclosures (1)
  • 1.96 IN Length X 0.63 IN Width X 0.98 IN Height, 9/32 IN Dia Hole, For EMT (1)
  • 1/2 IN Trade Size Three Piece Coupling, For Use With Rigid and IMC Conduit (1)
  • 1-1/2 IN Trade Size Connector for EMT Conduit, Set Screw Type, Male Hub Threads NPS, Body Length 1.94 IN, Max. Dia. 1.94 IN,Thread Length 0.56 IN, Concretetight when taped, Male Hub Threads - NPS (1)
  • 1-1/2 IN Trade Size Connector for EMT Conduit, Set Screw Type, Male Hub Threads NPS, Body Length 1.94 IN, Max. Dia. 1.94 IN,Thread Length 0.56 IN, Concretetight when taped, Male Hub Threads - NPS, Insulated Throat (1)
  • 1-1/2 IN Trade Size Hub, Hole Dia. Min 1.92 IN, Hole Dia. Max 2.02 IN, Panel Thickness Min. 0.06 IN, Panel Thickness Max. 0.25 IN, Insulated Throat (1)
  • 1-1/2 IN Trade Size Three Piece Coupling, For Use With Rigid and IMC Conduit (1)
  • 1-1/4 IN Trade Size Connector for EMT Conduit, Set Screw Type, Male Hub Threads NPS, Body Length 1.75 IN, Max. Dia. 1.69 IN,Thread Length 0.56 IN, Concretetight when taped, Male Hub Threads - NPS (1)
  • 1-1/4 IN Trade Size Connector for EMT Conduit, Set Screw Type, Male Hub Threads NPS, Body Length 1.75 IN, Max. Dia. 1.69 IN,Thread Length 0.56 IN, Concretetight when taped, Male Hub Threads - NPS, Insulated Throat (1)
  • 1-1/4 IN Trade Size Hub, Hole Dia. Min 1.67 IN, Hole Dia. Max 1.77 IN, Panel Thickness Min. 0.03 IN, Panel Thickness Max. 0.25 IN, Insulated Throat (1)
  • 1-1/4 IN Trade Size Three Piece Coupling, For Use With Rigid and IMC Conduit (1)
  • 2 1/4 IN Dia X 2 11/16 IN Length, 11/16 IN Thread Length, Concretetight (1)
  • 2 3/8 IN Dia X 3 11/32 IN Length, 7/8 IN Thread Length, Concretetight (1)
  • 2 IN Dia X 2 3/16 IN Length, 9/16 IN Thread Length, Concretetight (1)
  • 2 IN Trade Size Connector for EMT Conduit, Set Screw Type, Male Hub Threads NPS, Body Length 2.19 IN, Max. Dia. 2.38 IN,Thread Length 0.63 IN, Concretetight when taped, Male Hub Threads - NPS (1)
  • 2 IN Trade Size Connector for EMT Conduit, Set Screw Type, Male Hub Threads NPS, Body Length 2.19 IN, Max. Dia. 2.38 IN,Thread Length 0.63 IN, Concretetight when taped, Male Hub Threads - NPS, Insulated Throat (1)
  • 2 IN Trade Size Three Piece Coupling, For Use With Rigid and IMC Conduit (1)
  • 2.06 IN Dia X 3.05 IN Length, For Cabinets, Enclosures (1)
  • 2.1 X 2.1 IN, Raintight, For Rigid Conduit And IMC, With Cover (1)
  • 2.29 X 2.29 IN, Raintight, For Conduit And IMC, With Cover (1)
  • 2.47 IN Length X 0.62 IN Width X 0.86 IN Height, 3/16 IN Dia Hole, For Rigid Conduit And IMC (1)
  • 2-1/2 IN Trade Size Connector for EMT Conduit, Set Screw Type, Male Hub Threads NPS, Body Length 2.38 IN, Max. Dia. 3.13 IN,Thread Length 0.88 IN, Concretetight when taped, Male Hub Threads - NPS (1)
  • 2-1/2 IN Trade Size Hub, Hole Dia. Min 2.86 IN, Hole Dia. Max 3.00 IN, Panel Thickness Min. 0.06 IN, Panel Thickness Max. 0.31 IN, Insulated Throat (1)
  • 2-1/2 IN Trade Size Three Piece Coupling, For Use With Rigid and IMC Conduit (1)
  • 3 3/16 IN Dia X 5 1/16 IN Length, 1 IN Thread Length, Concretetight (1)
  • 3 IN Trade Size Connector for EMT Conduit, Set Screw Type, Male Hub Threads NPS, Body Length 2.88 IN, Max. Dia. 3.75 IN,Thread Length 0.88 IN, Concretetight when taped, Male Hub Threads - NPS (1)
  • 3 IN Trade Size Connector for EMT Conduit, Set Screw Type, Male Hub Threads NPS, Body Length 2.88 IN, Max. Dia. 3.75 IN,Thread Length 0.88 IN, Concretetight when taped, Male Hub Threads - NPS, Insulated Throat (1)
  • 3 IN Trade Size Three Piece Coupling, For Use With Rigid and IMC Conduit (1)
  • 3/4 IN Trade Size Connector for EMT Conduit, Set Screw Type, Male Hub Threads NPS, Body Length 1.09 IN, Max. Dia. 1.08 IN,Thread Length 0.44IN, Concretetight when taped, Male Hub Threads - NPS, Insulated Throat (1)
  • 3-1/2 IN Trade Size Connector for EMT Conduit, Set Screw Type, Male Hub Threads NPS, Body Length 3.00 IN, Max. Dia. 4.25 IN,Thread Length 1.00 IN, Concretetight when taped, Male Hub Threads - NPS (1)
  • 3-1/2 IN Trade Size Three Piece Coupling, For Use With Rigid and IMC Conduit (1)
  • 4 IN Trade Size Connector for EMT Conduit, Set Screw Type, Male Hub Threads NPS, Body Length 3.19 IN, Max. Dia. 4.75 IN,Thread Length 1.00 IN, Concretetight when taped, Male Hub Threads - NPS (1)
  • 4 IN Trade Size Connector for EMT Conduit, Set Screw Type, Male Hub Threads NPS, Body Length 3.19 IN, Max. Dia. 4.75 IN,Thread Length 1.00 IN, Concretetight when taped, Male Hub Threads - NPS, Insulated Throat (1)
  • 4 IN Trade Size Three Piece Coupling, For Use With Rigid and IMC Conduit (1)
  • Accurately tapped, tapered threads for tight, rigid joints and ground continuity;Concentric ring interlocked design sizes makes possible smaller diameter, allowing use in tighter spaces;Explosionproof, dust-ignitionproof;Nipple not removable;Smooth, rounded integral bushing in each hub protects conductor insulation;UNY unions are used for joining conduit and connecting conduit to enclosures, Facilitates modifications, permits removal of enclosures without turning or removal of conduit (1)
  • Accurately tapped, tapered threads for tight, rigid joints and ground continuity;Concentric ring interlocked design sizes makes possible smaller diameter, allowing use in tighter spaces;Explosionproof, dust-ignitionproof;Smooth, rounded integral bushing in each hub protects conductor insulation;UNF unions are used for joining conduit and connecting conduit to enclosures, Facilitates modifications, permits removal of enclosures without turning or removal of conduit (4)
  • Accurately tapped, tapered threads for tight, rigid joints and ground continuity;Concentric ring interlocked design sizes makes possible smaller diameter, allowing use in tighter spaces;Explosionproof, dust-ignitionproof;Smooth, rounded integral bushing in each hub protects conductor insulation;UNY unions are used for joining conduit and connecting conduit to enclosures, Facilitates modifications, permits removal of enclosures without turning or removal of conduit;With removable male nipple (3)
  • Accurately tapped, tapered threads for tight, rigid joints and ground continuity;Expansion unions compensate for expansion and contraction of conduit;Explosionproof, dust-ignitionproof;Internal phosphor bronze bonding jumper ring assures positive ground between telescoping cylinders;One-piece design eliminates need for disassembly during installation;Small external diameters excellent in restricted areas in wiring of pumps, motors and other equipment;Smooth, rounded integral bushing in each hub protects co (3)
  • Allows easy insertion of grounding conductor for through or end connection;Copper conductor only for #14-4 lug;Low grounding connector profile;Lugs not sold separately;O-Z/Gedney specification grade insulated bushings provide a grounding lug to allow for grounding of conduit through the insulated bushing;Phenolic insulation, with 150 DEG C UL rating, molded on over metallic conduit stop will not shatter or shrink at sub-zero temperatures;Protects insulated conductors from abrasion during pulling and mechan (4)
  • Allows easy insertion of grounding conductor for through or end connection;Low grounding connector profile;Lugs not sold separately;O-Z/Gedney specification grade insulated bushings provide a grounding lug to allow for grounding of conduit through the insulated bushing;Phenolic insulation, with 150 DEG C UL rating, molded on over metallic conduit stop will not shatter or shrink at sub-zero temperatures;Protects insulated conductors from abrasion during pulling and mechanical vibration;Provides voltage grad (1)
  • Allows misaligned knockout connection by rolling the offset nipple until aligned with each knockout (2)
  • Aluminum bodies and nuts, BUNA-N o-ring;Hole diameter: 1.92 - 2.02 IN;Insulated throat, rated up to 150 DEG C, prevents wire abrasion;Integral O-ring provides watertight seal;May be used in wet or dry locations, indoors or outdoors;Panel thickness: 0.06 - 1/4 IN;Rugged metallic construction ensures mechanical protection;Smooth, accurately tapped threads facilitate installation;Unique profile permits easy wrenching;Watertight and corrosion resistant (1)
  • An insulating coupling with a substantial center shoulder to prevent butting of conduit sections, ensuring a definite break in the metallic path;Dielectric strength of 220 V/MIL;Recommended for use where high strength or resistance to moisture or acid conditions is required;Temperature rating 150 DEG C;Will not melt, soften or burn (5)
  • Appleton's uni-seal rigid conduit hubs eliminate the need for welded hubs;Built-in recessed gasket;efficiency of installation is built into the superior design;Flame resistant insulated throat eliminates need for end bushings;General purpose fitting;Insulated throat form provides a more vibration resistant connection between threaded rigid conduit or IMC and enclosure;Patented hex-hub wedge adapter fits nearly flush against the interior side walls of enclosures;Protective insulated throats, positive ground (2)
  • Available with bolt or swing bolt (1)
  • Beam Clamp Maximum Load: 750 lb, Maximum Jaw Opening: 1 in, Set Screw: 3/8-16, Jaw Width: 1.38 in, C22.2 No. 18.4 For Provides 2 in Beam Clamp (1)
  • Bonded with neoprene gasket (2)
  • Can be used with a locknut to terminate conduit at an enclosure;Fasten and ground threaded rigid, IMC metal conduit to an enclosure, copper or aluminum conductors;Insulating liner material is self-extinguishing;Lug used to connect bonding jumper to a neutral bus bar;Lugs not sold separately;Provides a compact means of grounding conduit through an insulated bushing;The plastic liner is tough, It resists corrosion, chemicals and temperature extremes, surface friction is so low that wires can be pulled with v (3)
  • Capable of withstanding heavy loads;Easily installs;Three styles meet every installation need, heavy duty u-bolts, hex bolts and hex nuts (11)
  • Combination Coupling 1/2 IN Flex Metal Conduit to EMT Conduit, Screw-In Compression (1)
  • Compact design;Quick installations;Rain and concrete tight (1)
  • Concretetight (10)
  • Concrete-Tight (7)
  • Concretetight When Taped (7)
  • Concrete-Tight;Raintight (13)
  • Explosionproof;Dust Ignitionproof (2)
  • Explosionproof;Dust-Ignitionproof;Smooth;Rounded Integral Bushing in Each Hub Protects Conductor Insulation (3)
  • Flush Type Reducing Bushing Threaded for Rigid Conduit or IMC, Trade Size 1-1/2 x 1-1/2 IN (1)
  • Flush Type Reducing Bushing Threaded for Rigid Conduit or IMC, Trade Size 1-1/2 x 3/4 IN (1)
  • Flush Type Reducing Bushing Threaded for Rigid Conduit or IMC, Trade Size 2 x 1/2 IN (1)
  • Flush Type Reducing Bushing Threaded for Rigid Conduit or IMC, Trade Size 2 x 3/4 IN (1)
  • High impact black thermosetting phenolic bushings, with at 150 DEG C UL temperature rating, that will not soften, melt or burn;O-Z/Gedney also has a plug to be used with metallic or nonmetallic bushings to prevent the entry of dirt or dust;O-Z/Gedney nonmetallic insulating bushings are used to protect wires and cables at entry and exit of threaded rigid conduit and IMC (20)
  • High impact black thermosetting phenolic bushings, with at 150 DEG C UL temperature rating, that will not soften, melt or burn;O-Z/Gedney also has a plug to be used with metallic or nonmetallic bushings to prevent the entry of dirt or dust;O-Z/Gedney nonmetallic insulating bushings are used to protect wires and cables at entry and exit of threaded rigid conduit and IMC;Type ABB is a combination of type A and BB bushings for insulating cables passing through metal boxes or troughs (2)
  • It will Change the direction of the conduit run and terminate the run into a box or enclosure (1)
  • Malleable iron clamps are exceptionally rugged and strong offer economy and have integrally formed gussets for excellent strength, hot dipped galvanized finish;Mounting hole: 0.38 IN diameter (2)
  • Malleable iron clamps are exceptionally rugged and strong offer economy and have integrally formed gussets for excellent strength, hot dipped galvanized finish;Mounting hole: 0.50 IN diameter (1)
  • Malleable iron clamps are exceptionally rugged and strong offer economy and have integrally formed gussets for excellent strength, hot dipped galvanized finish;Mounting hole: 1/4 IN diameter (3)
  • Miscellaneous Fittings, Switch Box Supports, Knockout Seals, Knock Out Plug (1)
  • Multigang Switch Box;Welded;Bottom Knockout (1)
  • Non-grounding;Provides a smooth pulling surface (1)
  • Provide a 90 DEG change of direction in a conduit run (1)
  • Provide a 90 DEG change of direction in a conduit run;Provides a compact wire pulling point;Watertight (2)
  • provide spacing from mounting surface when used with pipe clamps (5)
  • Reduce the size of a knockout or slip hole in a sheet metal enclosure to a smaller trade size; Two reducing washers of the same size are required for each knockout; Knockout closures are used to close unused opening or knockout in sheet metal box, enclosure or cabinet (6)
  • Rugged Metallic Construction;Watertight (4)
  • Screw-On Cover (2)
  • Smooth rounded integral bushing protects conductor insulation (22)
  • Smooth Rounded Integral Bushing Protects Conductor Insulation;Full Machine Tapered Threads (NPT) (1)
  • Suitable for conduit runs on vertical and horizontal beams.;Suitable for rigid, IMC and EMT;Unique design accommodates more sizes of conduit with fewer clamps for lower inventories (2)
  • Tapered Threaded;Grounding Screw;Water Tight (1)
  • Threaded Flush Mount (1)
  • Threaded;Grounding Screw;Water Tight (5)
  • Threadless, Concrete Tight (1)
  • Threadless, Concretetight (5)
  • Three Piece (2)
  • Trade Size 1/16 x 1 - 1/2 x 2-1/2 IN Safety Plate, 1500 Pieces Per Package (1)
  • Two are Required Per Box;Sold in Pairs (1)
  • UL Listed Raintight, No disassembly required, Concretetight (2)
  • Unique profile permits easy wrenching. Smooth, accurately tapped threads facilitate installation. Watertight and corrosion resistant. NEMA Types: 2,3,3R,4,4X,12, 13 (3)
  • Used To Secure An Ordinary Nut From Working Loose By Locking, Itself When Screwed Down Tight (1)
  • Show More...

• Sub Brand

  

  • ETP[R] (1)
  • Neer(TM) (10)
  • Unilets(TM) (2)
  • Show More...

• Connector Type

  

  • Compression (28)
  • SET SCREW (25)
  • Threaded Coupling (10)
  • Show More...

• Color

  

  • Black (27)
  • Gray (2)
  • Grey (3)
  • Metallic (65)
  • Metallic Body/Green Nut (2)
  • Show More...

• Material

  

  • Aluminum (12)
  • Body and Nut: Cooper-free Aluminum Die Cast, O-Ring: BUNA-N, Insulator: polypropylene (3)
  • Castings: Malleable Iron, Hardware: Steel (11)
  • Copper-Free Aluminum Body, Stainless Steel Screws (5)
  • Die Cast Zinc (4)
  • Malleable Iron (28)
  • Malleable Iron And Steel (2)
  • Malleable Iron Clamp, Steel Screw, Hardened Case (1)
  • Phenolic (22)
  • Polypropylene (PP) (1)
  • Steel (106)
  • Zinc Die Cast (12)
  • Show More...

• Category Description

  

  • All Recessed Cans & Trims (1)
  • BEAM, RA, EDGE, & PARALLEL CLAMPS (14)
  • CONDUIT HANGERS/STAND OFF STRAPS (3)
  • COUPLINGS, ADAPTERS, REDUCERS, BUSHINGS, & CAPS (25)
  • DIECAST EMT FITTINGS (3)
  • DIECAST OFFSET & CHASE NIPPLES (4)
  • EMT STRAPS (3)
  • FORM 5 CONDULETS, COVERS, & GASKETS (1)
  • Fuses & Fuse Accessories (1)
  • HAZARDOUS LOCATION FITTINGS (11)
  • Locknuts, Bushings, Re-Bushings, Re-Washers, Threaded Plugs, Knockout Plugs (59)
  • PVC ELBOWS (3)
  • PVC SPACERS (6)
  • RIGID COUPLINGS (2)
  • RIGID STRAPS & CLAMPBACKS (11)
  • Screws, Bolts, Staples, Jack Chains, Washers & TY-Raps (1)
  • SLB'S & JAKE ELL'S (5)
  • STEEL BOXES & COVERS (2)
  • STEEL EMT FITTINGS (46)
  • Watertight Hub, 3-PIECE COUPLINGS, THREADLESS COUPLINGS AND THREADLESS CONNECTOR (41)
  • Show More...

• Type

  

  • 2 Hole Snap-On Strap (1)
  • 90 Deg Corner Pulling Elbow (2)
  • 90 DEG Gasketed Pulling Elbow (2)
  • 90 DEG Gland Compression Short Connector (1)
  • 90 DEG Short Bushed Elbow (1)
  • AJ Beam Clamp (2)
  • Aluminum Die Cast, Watertight Hubs, Insulated and Gasketed (3)
  • BEAM CLAMP (1)
  • CLAMP (6)
  • Clamp Back (5)
  • Combination Coupling (3)
  • Combination Coupling EMT TO Flex (1)
  • Compression Connector (6)
  • Conduit Bushing (1)
  • CONDUIT HANGER WITH BOLT (1)
  • COUPLING (6)
  • Edge Type Clamp (4)
  • ELBY Series 90 DEG Capped Elbow (2)
  • EMT Conduit 1 Hole Click-On Strap (1)
  • EMT Conduit Compression Coupling (13)
  • EMT Conduit Nail Strap (2)
  • EMT Conduit Set Screw Coupling (9)
  • EMT Conduit Straight Compression Connector (16)
  • EMT Conduit Straight Set Screw Connector (17)
  • EMT Conduit Straight Set Screw Coupling (1)
  • Insulated Grounding Bushing With Aluminum Lay-In-Lug (3)
  • Insulated Hub (5)
  • Insulating Bushing (1)
  • LOCKNUT (1)
  • Multigang Switch Box (1)
  • Offset Nipple (4)
  • Parallel Type Clamp (3)
  • Reducing Bushing (29)
  • Reducing Flush Bushing (3)
  • Reducing Washer (15)
  • Right Angle Type Clamp (4)
  • Safety Plates (1)
  • Sealing Locknut (2)
  • Snap In Blank (1)
  • Straight Insulated Throat Hub (2)
  • Switch Box Supports (1)
  • Three Piece Coupling (10)
  • Type A Non-Grounding Insulating Bushing (10)
  • Type ABB Insulating Bushing (2)
  • Type ABLG Insulated Grounding Bushing (5)
  • Type BB Non-Grounding Insulating Bushing (10)
  • Type ICC Phenolic Insulating Coupling (5)
  • Type IS Beam Clamp (1)
  • UNF Standard Expansion Union (3)
  • UNF Union (5)
  • UNY Union (6)
  • Watertight Hubs (9)
  • Show More...

• Size

  

  • 0.5 (6)
  • 0.75 (6)
  • 1 (18)
  • 1 X 0.75 (1)
  • 1 X 1/2 (1)
  • 1 X 3/4 (2)
  • 1.25 (5)
  • 1.25 X 0.5 (1)
  • 1.25 X 0.75 (1)
  • 1.5 (5)
  • 1/2 (7)
  • 1/2 - 3/4 (1)
  • 1/2 X 3/8 (1)
  • 1-1/2 (11)
  • 1-1/2 3/4 (1)
  • 1-1/2 X 1 (1)
  • 1-1/2 x 1-1/4 (2)
  • 1-1/4 (7)
  • 1-1/4 X 1 (1)
  • 1-1/4 X 1/2 (1)
  • 1-1/4 X 3/4 (2)
  • 1-2/2 x 1/2 (1)
  • 2 (15)
  • 2 X 1 (1)
  • 2 x 1/2 (2)
  • 2 X 1-1/2 (2)
  • 2 X 1-1/4 (1)
  • 2 x 3/4 (1)
  • 2.5 (3)
  • 2-1/2 (5)
  • 2-1/2 X 1 (1)
  • 2-1/2 X 2 (1)
  • 3 (7)
  • 3 x 2 (1)
  • 3 X 2-1/2 (1)
  • 3.5 (2)
  • 3/4 (10)
  • 3/4 X 1/2 (2)
  • 3/8 (1)
  • 3-1/2 X 2-1/2 (1)
  • 3-1/2 X 3 (1)
  • 4 (9)
  • 4 x 3 (1)
  • 4.58 X 2.81 (1)
  • 5 (2)
  • 6-7/8 X 4-9/16 (1)
  • Show More...