Narrow By:

• Manufacturer: AppletonOz

• Product Type

  

  • 1 1/2 FM7 Cover Stamped-Alum (1)
  • 1 1/2 FM 7 Body (1)
  • 1 1/2 FM7 Body (4)
  • 1 1/2 FM7 Body (A) (1)
  • 1 1/2 FM7 Body (A) (1)
  • 1 1/2 FM7 Body Type C -Alum (1)
  • 1 1/2 FM7 Body Type LB-Alum (1)
  • 1 1/2 FM7 Body Type LL-Alum (1)
  • 1 1/2 FM7 Body Type LR-Alum (1)
  • 1 1/2 FM7 Body Type T -Alum (1)
  • 1 1/2 Form 35 Type T THR (1)
  • 1 1/4 FM7 Cover Stamped-Alum (1)
  • 1 1/4 FM7 Body (7)
  • 1 1/4 FM7 Body Type C -Alum (1)
  • 1 1/4 FM7 Body Type LL-Alum (1)
  • 1 1/4 FM7 Body Type LR-Alum (1)
  • 1 1/4 FM7 Body Type T -Alum (1)
  • 1 1/4 FORM35 Type LB Threa (1)
  • 1 1/4 Type LB Form 85 Uni (A) (1)
  • 1 Cover For Form 35 Unilet (1)
  • 1 Eys Sealing Unilet-Female (1)
  • 1 FM7 Body Type C -Alum (1)
  • 1 FM7 Body Type LB-Alum (1)
  • 1 FM7 Body Type LL-Alum (1)
  • 1 FM7 Body Type LR-Alum (1)
  • 1 FM7 Body Type TB-Alum (1)
  • 1 Form 85 Unilet (A) (1)
  • 1 G R Uni Inside Threads T (1)
  • 1 Gang 2-5/8 Deep 5 1 Hubs (1)
  • 1 GR Unilet (1)
  • 1 In 90D LFNC Conn (1)
  • 1 In Alum Cond Bdy CVR (1)
  • 1 In Alum L-T CRD&CBL Conn (2)
  • 1 In Close Up Plugs (Bag Of 4) (1)
  • 1 In Exp Proof Sealing FTG (1)
  • 1 In FM7 Body (6)
  • 1 In FM7 Cover Alum (1)
  • 1 In Form 35 Unilet (1)
  • 1 In Insul LFMC Conn (1)
  • 1 In LFMC Conn Alum (1)
  • 1 In LFNC Conn (1)
  • 1 In LR Iron Cond Bdy (1)
  • 1 In STL L-T CRD&CBL Conn (1)
  • 1 In STR Strain RLF Conn (1)
  • 1 In THD Alum LC Bdy CVR GSKT (1)
  • 1 In THD Alum LR Bdy CVR GSKT (1)
  • 1 Male Drain Seal (1)
  • 1 Male Seal-Off (1)
  • 1 Mogul Unilet Type C (1)
  • 1 Threaded Unilet (1)
  • 1 Unilet Type FD 1-Gang (2)
  • 1 Unilet Type FD-2 Gang (1)
  • 1/2 FM7 Cover Sand-Cast Al (1)
  • 1/2 FM7 Body (5)
  • 1/2 FM7 Body Type C - Alum (1)
  • 1/2 FM7 Body Type LB- Alum (1)
  • 1/2 FM7 Body Type LL- Alum (1)
  • 1/2 Form 35 Type T THR (1)
  • 1/2 Form 35 Unilet (1)
  • 1/2 Form 85 Unilet (1)
  • 1/2 GR Unilet (2)
  • 1/2 In 45DEG LFMC Conn (1)
  • 1/2 In 90D LFNC Conn (1)
  • 1/2 In 90DEG LFMC Conn Alum (1)
  • 1/2 In Alum Cond Bdy CVR (1)
  • 1/2 In LFNC Conn (1)
  • 1/2 In Liquidtight Gasket (1)
  • 1/2 In STL L-T CRD&CBL Conn (3)
  • 1/2 In STR Strain RLF Conn (3)
  • 1/2 In Wire Mesh Strain Relief (1)
  • 1/2 STL FM7 Cover Assy (1)
  • 1/2 Type FS Thread Unilet (1)
  • 1/2 Type FSC Thread Unilet (1)
  • 1-1/2 In 90D LFNC Conn (1)
  • 1-1/2 In 90DEG LFMC Conn (1)
  • 1-1/2 In Alum L-T CRD&CBL Conn (2)
  • 1-1/2 In Form 35 Unilet (1)
  • 1-1/2 In LFNC Conn (1)
  • 1-1/2 In STR Strain RLF Conn (2)
  • 1-1/2 Male Seal-Off (1)
  • 1-1/2 STL FM7 Cover Assy (1)
  • 1-1/2 THD Alum LC Bdy CVR GSKT (1)
  • 1-1/2 THD Alum LR Bdy CVR GSKT (1)
  • 1-1/2 THD Alum TC Bdy CVR GSKT (1)
  • 1-1/2 Uni Inside Thread/Sur (1)
  • 1-1/2 Union Conn Type Unf (1)
  • 1-1/4 FM7 Body Type LB-Alum (1)
  • 1-1/4 Form 35 Type T THR (1)
  • 1-1/4 In Insul LFMC Conn (1)
  • 1-1/4 In STR Strain RLF Conn (1)
  • 1-1/4 In Vert Sealing Fitting (1)
  • 1-1/4 Male Seal-Off (1)
  • 1-1/4 STL FM7 Cover Assy (1)
  • 1-1/4 THD Alum LC Bdy CVR GSKT (1)
  • 1-1/4 THD Alum LR Bdy CVR GSKT (1)
  • 1-1/4 THD Alum TC Bdy CVR GSKT (1)
  • 1-1/4 Union Conn Type Unf (1)
  • 1-1/4&1-1/2 Alum Cond Bdy CVR (1)
  • 1-1/4&1-1/2 Cover For Form 35 (1)
  • 1-Gang Duplex Receptacle Cover (1)
  • 2 FM7 Cover Stamped-Alum (1)
  • 2 1/2 -3 FM 7 Cover Assem (1)
  • 2 1/2 Form 85 LB Alum (1)
  • 2 1/2-3 FM7 Cover Stamped-Alum (1)
  • 2 Cover For Form 35 Unilet (1)
  • 2 FM7 Body (6)
  • 2 FM7 Body (A) (1)
  • 2 FM7 Body Type C -Alum (1)
  • 2 FM7 Body Type LB-Alum (1)
  • 2 FM7 Body Type LL-Alum (1)
  • 2 FM7 Body Type LR-Alum (1)
  • 2 FM7 Body Type T -Alum (1)
  • 2 FM7 Cover Assembly (1)
  • 2 Form 35 Type T THR U (1)
  • 2 In 90D LFNC Conn (1)
  • 2 In Alum Cond Bdy CVR (1)
  • 2 In Form 35 Unilet (1)
  • 2 In LFNC Conn (1)
  • 2 In STR Strain RLF Conn (2)
  • 2 In THD Alum LC Bdy CVR GSKT (1)
  • 2 Male Seal-Off (1)
  • 2 Type LB Form 35 THR U (1)
  • 2 Unilet (1)
  • 2 Union Connector Type Unf (1)
  • 2-1/2 & 3 Cover For Form 35 (1)
  • 2-1/2 In 90DEG LFMC Conn (1)
  • 2-1/2 In LFMC Conn (1)
  • 2-Gang Thick Wall FD Unilet (1)
  • 3 FM7 Body Type LB-Alum (1)
  • 3 In 90DEG LFMC Conn (1)
  • 3 In STR Conn LFMC (1)
  • 3/4 FM7 Cover Sand-Cast Al (1)
  • 3/4 FM 7 Cover Assembly (1)
  • 3/4 FM7 Body (1)
  • 3/4 FM7 Body Type C - Alum (1)
  • 3/4 FM7 Body Type LL- Alum (1)
  • 3/4 FM7 Body Type LR- Alum (1)
  • 3/4 FM7 Body Type TB- Alum (1)
  • 3/4 Form 35 Type LL THR (1)
  • 3/4 Form 35 Type LR THR (1)
  • 3/4 GR Unilet Type C (1)
  • 3/4 GR Unilet W/Internal (1)
  • 3/4 GRL Unilet (1)
  • 3/4 Grssa Aluminum Unilet (1)
  • 3/4 In 45 Deg Conn LFMC (1)
  • 3/4 In 45DEG LFMC Conn (1)
  • 3/4 In 90D LFNC Conn (1)
  • 3/4 In 90DEG LFMC Conn Alum (1)
  • 3/4 In Alum CLP On Entr Cap (1)
  • 3/4 In Alum L-T CRD&CBL Conn (1)
  • 3/4 In LFMC Conn (1)
  • 3/4 In Liquidtight Gasket (1)
  • 3/4 In STL L-T CRD&CBL Conn (1)
  • 3/4 In Wire Mesh Strain Relief (1)
  • 3/4 LL FM7 Body (App) (1)
  • 3/4 LR FM7 Body (App) (1)
  • 3/4 Swivel Hanger Cover (1)
  • 3/4 TB FM7 Body (App) (1)
  • 3/4 Threaded Unilet 2-Gang (1)
  • 3/4 Type FD Thread Unilet (1)
  • 3/4 Type FDC Thread Unilet (1)
  • 3/4 Type GRJS Expl Proof (1)
  • 3/4 Unilet Body (1)
  • 3/4 Unilet GR (1)
  • 3/4 Unilet Type FD-1 Gang (2)
  • 3/4 X FM7 Body (App) (1)
  • 3/8 In 45DEG LFMC Conn (1)
  • 3/8 In 90 Deg Conn LFMC (1)
  • 3/8 In 90DEG LFMC Conn (1)
  • 3/8 In LFMC Conn (1)
  • 3/8 In Squeeze Conn Flex/Ac (1)
  • 3-1/2 & 4 Cover For Form 35 (1)
  • 4 In 90DEG LFMC Conn (1)
  • 4 In LFMC Conn (1)
  • 4 In SQ 2 Dev Flat CVR (1)
  • 4 In SQ CVR 1-1/2 In RSD 2 DVC (1)
  • 4 In SQ CVR 2 In RSD SGL DVC (1)
  • 4 In SQ CVR 2-1/2 In SGL RCPT (1)
  • 4 In SQ CVR SGL RCPT/Toggle (1)
  • 4-11/16 In S CVR 1/2 RSD SGL D (1)
  • 4-11/16 S CVR 1/2 RSD 2 DVC (1)
  • 4-11/16 SQ CVR 1 Gfci (1)
  • BX 4-11/16 SQ 2-1/8 DP 3/4 In Kos (2)
  • BX SQ CRNR SW 3X2X2 PLSTR EARS1/2 Ko (1)
  • Cast Cover SQ HNDL TGL SW (1)
  • Cast Dev Box SGL Gang 1 In Hub (2)
  • Close Up Plug (1)
  • Conduit Body (7)
  • Conduit Outlet Body (31)
  • Conduit Outlet Body Cover (4)
  • Conduit Seal Body (5)
  • Corner Switch Box (4)
  • Cover (5)
  • Cover FS + FD / Gang (1)
  • Cover Vapor Proof 1 Gang Flat (1)
  • CVR 4 In SQ 1/4 In RSD 2 Device 3.0 Cap (1)
  • Device Box (3)
  • FM7 Body Type T -Alum (1)
  • FM7 Cover Gasket 1/2 (1)
  • FS Cover W/Receptacle and Cap WP (1)
  • Handy Box Cover (5)
  • Insulated Connector (12)
  • LFMC Conn Alum (1)
  • Liquid Tight 90°Connector (5)
  • Liquid Tight Straight Connector (7)
  • Masonry Box (4)
  • Masonry Box 3 Gang 2-1/2 Deep (1)
  • Msnry Box 4 Gand 2-1/2 Deep (1)
  • Octagon Box (6)
  • Outlet Box (10)
  • Plug 1 Rec Head Close-Up-Alum (1)
  • Plug 1/2 Rec Head Close-Up-Alu (1)
  • Plug 1/2 Rec Head Close-Up-STL (1)
  • Plug 1/2 SQR Head Close-Up (1)
  • Plug 1-1/2 SQR Head Close-Up (1)
  • Plug 1-1/4 Rec Head Close-Up (1)
  • Plug 2 SQR Head Close-Up (1)
  • Plug 3 Rec Head Close-Up Iron (1)
  • RNG Ext 4 In Oct 1/2 In Kos (1)
  • RNG Ext 4-11/16 SQ 2-1/8 DP 1/2/4 Kos (1)
  • Sheathed Cable Connector (1)
  • Single Gang Alum Cover (2)
  • Single Gang Blank Alum Cover (1)
  • Single Gang Steel Cover (1)
  • Single Gang Threaded Unilet (2)
  • Square Box (7)
  • Square Cover (25)
  • Stamped Cover (3)
  • Strain Relief Cord and Cable Connector (8)
  • Threaded 2 Gang Unilet (1)
  • Threaded Unilet (4)
  • Threaded Unilet (A) (1)
  • Threaded Unilet 1 (2)
  • Threaded Unilet 3/4 (1)
  • Uni Form 35 11/2 Thread (A) (1)
  • Unilet 1 Threaded (1)
  • Unilet 3/4 Threaded 2 Gang (1)
  • Unilet Form 35 1 1/4 Threaded (1)
  • Unilet Form 35 1 In Threaded (1)
  • Unilet Form 35 1 Threaded (2)
  • Unilet Form 35 1/2 THR (1)
  • Unilet Form 35 1/2 THR (A) (1)
  • Unilet Form 35 11/2 THR (1)
  • Unilet Form 35 1-1/4 In (2)
  • Unilet Form 35 2 In Threaded (1)
  • Unilet Form 35 2 Thread (1)
  • Vaporproof Cover (1)
  • Vaporproof Cover SGL Gang (1)
  • Weatherproof Outlet Box (1)
  • Wet Loc Cover-Duplex Recept(A) (1)
  • Show More...

• Brand

  

  • Appleton (466)
  • Appleton/Oz Gedney (6)
  • APPOZGCOMM (13)
  • O-Z/GEDNEY (19)
  • Show More...

• Finish

  

  • Chromate, Epoxy Powder Coat/Zinc Electroplated (11)
  • Epoxy Powder Coat (68)
  • Epoxy Powder Coated (23)
  • Epoxy Powder Coated Dichromate Zinc Electro-Plated (2)
  • Galvanized (25)
  • Natural (15)
  • Natural Aluminum (15)
  • Plain (1)
  • Powder Coated (2)
  • Powder Coated Epoxy (2)
  • Pre-Galvanized (58)
  • STAINLESS STEEL (2)
  • Triple-Coat (Zinc Electroplate, Chromate And Epoxy Powder Coat) (87)
  • Unfinished (2)
  • Zinc Electroplate (14)
  • Zinc Electroplated (30)
  • Zinc Electro-Plated (4)
  • Zinc Electroplated Chromate Epoxy Powder Coated (2)
  • Zinc Electro-Plated Chromate Epoxy Powder Coated (2)
  • Zinc Electroplated With Aluminum Enamel (1)
  • Zinc Electroplated;Chromate And Epoxy Powder Coat/Zinc Electroplate (2)
  • Zinc Electro-Plated;Dichromate;Epoxy Powder Coated (2)
  • Zinc Plated (10)
  • Show More...

• Trade Size

  

  • 0.5 (3)
  • 0.75 (1)
  • 0-50 (1)
  • 1 in (11)
  • 1.5 (1)
  • 1/2 (1)
  • 1/2 in (10)
  • 1-1/2 (1)
  • 1-1/2 in (3)
  • 1-1/4 (1)
  • 1-1/4 in (3)
  • 1-1/4 in;1-1/2 in (1)
  • 2 (1)
  • 2 in (6)
  • 3 in (2)
  • 3/4 (1)
  • 3/4 in (24)
  • 4 (1)
  • Show More...

• Model

  

  • C (1)
  • CG (7)
  • GR (1)
  • PLG (5)
  • Series CG (1)
  • Show More...

• Color

  

  • /;Brown (1)
  • /;Gray (1)
  • /;Green (1)
  • /;Orange (1)
  • /;Pink (2)
  • /;Purple (2)
  • /;Yellow (1)
  • Brown (1)
  • Gray (62)
  • Metallic (6)
  • Orange (1)
  • Pink (2)
  • Purple (1)
  • Red (1)
  • Yellow (1)
  • Show More...

• Material

  

  • Aluminum (40)
  • Aluminum (Body);Copperfree Aluminum (Cap);Neoprene (Sealing Grommet);Steel (Washer);Stainless Steel (Wire Mesh Strain Relief) (6)
  • Cast Aluminum (3)
  • Copperfree (4/10 Of 1 PCT Maximum) Aluminum (18)
  • Copperfree Aluminum (6)
  • Die Cast Aluminum (27)
  • Die Cast Zinc (2)
  • Diecast Copperfree (4/10 Of 1 PCT) Aluminum (1)
  • Die-Cast Zinc (1)
  • Grayloy-Iron (8)
  • Machined Steel (Body/Cap);Neoprene (Sealing Grommet);Steel (Washer);Stainless Steel (Wire Mesh Strain Relief) (2)
  • Malleable Iron (65)
  • Malleable Iron (Body And Compression Nut);Aluminum (Ferrule);Polypropylene (Sealing Ring) (4)
  • Malleable Iron (Body);Steel (Cap, Ferrule);Polypropylene (Sealing Ring) (1)
  • Malleable Iron (Body);Steel (Ferrule, Caps);Polypropylene (Sealing Ring) (2)
  • Malleable Iron (Body, Cap);Aluminum (Ferrule);Polypropylene (Sealing Ring) (2)
  • Malleable Iron Body And Nut, Steel Ferrule (3)
  • Malleable Iron, PVC Grommets (9)
  • Metal (Clad Cable, Conduit Clamp) (1)
  • Plaster (Ear) (1)
  • Plaster (Ring/Mud Ring) (1)
  • Pressure Cast Aluminum (7)
  • SAND CAST ALUMINUM (1)
  • Stainless Steel (2)
  • Steel (99)
  • Steel (Body, Compression Nut, Ferrule);Polypropylene (Sealing Ring) (3)
  • Steel (Body/Compression Nut/Sleeve);Neoprene (O-Ring);Nylon (Ferrule);Stainless Steel (Wire Mesh) (1)
  • Steel And Malleable Iron (1)
  • Zinc Die Cast (16)
  • Show More...

• Body Type

  

  • Conduit (28)
  • Conduit Seal (5)
  • Drawn (1)
  • Form 35 (13)
  • Form 7 (5)
  • Internally Threaded (1)
  • Show More...

• Connection Type

  

  • 3/4 in Connector (1)
  • Female (3)
  • Female Threaded (2)
  • Male x Female (2)
  • Screw (1)
  • Threaded (35)
  • Threaded Hub (8)
  • Show More...

• Shape

  

  • C (1)
  • LB (4)
  • Octagon (7)
  • Rectangular (18)
  • Round (3)
  • Shallow (2)
  • Square (63)
  • T (3)
  • TB (2)
  • Show More...

• Capacity

  

  • 10 cu.in (1)
  • 10.3 cu.in (1)
  • 12 cu.in (1)
  • 12.20 cu.in;0.2 dm^3 (2)
  • 12.5 cu.in (1)
  • 13 cu.in (2)
  • 14 cu.in (1)
  • 15.5 cu.in (7)
  • 18 cu.in (4)
  • 18/0.29 cu.in/dm^3 (1)
  • 183.50 cu.in;3.0 dm^3 (1)
  • 21 cu.in (4)
  • 21.0 cu.in (1)
  • 21.5 cu.in (1)
  • 22 cu.in (1)
  • 29 cu.in (1)
  • 29.5 cu.in (1)
  • 3.5 cu.in (3)
  • 30.3 cu.in (4)
  • 32.30 cu.in;0.5 dm^3 (1)
  • 33.80 cu.in;0.6 dm^3 (1)
  • 36 cu.in (1)
  • 4.30 cu.in;0.1 dm^3 (1)
  • 4.35 cu.in;0.1 dm^3 (3)
  • 4.5 cu.in (2)
  • 42 cu.in (2)
  • 44 cu.in (1)
  • 5.5 cu.in (1)
  • 6 cu.in (2)
  • 66 cu.in (1)
  • 69.70 cu.in;1.1 dm^3 (1)
  • 7 cu.in (9)
  • 7.30 cu.in;0.1 dm^3 (4)
  • 7.33 cu.in;0.1 dm^3 (1)
  • 7.5 cu.in (2)
  • 71.20 cu.in;1.2 dm^3 (1)
  • 8 cu.in (4)
  • 9 cu.in (1)
  • 9.5 cu.in (1)
  • Show More...

• Length

  

  • 0.81 in;20.6 mm (4)
  • 0.88 in;22.4 mm (2)
  • 0.94 in;23.9 mm (2)
  • 1.20 in;30.5 mm (1)
  • 1.44 in;36.6 mm (1)
  • 1.5 in;38.1 mm (1)
  • 1.63 in;41.4 mm (1)
  • 10.19 (1)
  • 10.2 (3)
  • 10.20 in;259.1 mm (2)
  • 10.56 (3)
  • 10.71 (4)
  • 10-1/2 (1)
  • 11.63 (2)
  • 13.14 (1)
  • 13.14 in;333.8 mm (1)
  • 13.69 (1)
  • 2 (1)
  • 2 in (1)
  • 2 in;50.8 mm (1)
  • 2.19 (2)
  • 2.25 in;57.2 mm (1)
  • 2.31 (1)
  • 2.50 in;63.5 mm (1)
  • 2.59 in;65.8 mm (1)
  • 3 in (4)
  • 3.5 in (1)
  • 3.63 in (1)
  • 3.69 in;93.7 mm (3)
  • 3.75 in;95.3 mm (1)
  • 3-3/4 in (4)
  • 4 in (40)
  • 4.25 in (1)
  • 4.31 (1)
  • 4.4 (1)
  • 4.40 in;111.8 mm (2)
  • 4.52 in (1)
  • 4.56 (6)
  • 4.63 (3)
  • 4.82 in;122.4 mm (2)
  • 4-11/16 in (4)
  • 4-3/4 (1)
  • 5.07 in;128.8 mm (2)
  • 5.17 in;131.3 mm (1)
  • 5.19 (6)
  • 5.38 (7)
  • 5.5 (1)
  • 5.50 in;139.7 mm (1)
  • 5.63 (4)
  • 5.79 in;147.1 mm (1)
  • 5.94 (2)
  • 6 (9)
  • 6.06 in (2)
  • 6.44 (1)
  • 6.44 in;163.6 mm (1)
  • 6.69 (1)
  • 6-1/2 (6)
  • 6-1/4 (10)
  • 7 (2)
  • 7.13 (8)
  • 7.13 in (1)
  • 7.44 (6)
  • 7.79 (1)
  • 7.79 in;197.9 mm (1)
  • 7.81 in;198.4 mm (1)
  • 7.87 (2)
  • 7.88 (1)
  • 7-1/4 (5)
  • 8.13 (6)
  • 8.19 (12)
  • 8.45 (3)
  • 8.56 (1)
  • 9.19 (8)
  • 9.81 (1)
  • Show More...

• Diameter

  

  • 0.91 in (1)
  • 0.94 in;23.9 mm (2)
  • 1 in (2)
  • 1.25 in;31.8 mm (5)
  • 1.38 in;35.1 mm (1)
  • 1.5 in;38.1 mm (1)
  • 1.50 in;38.1 mm (1)
  • 1.63 in;41.4 mm (1)
  • 1.75 in;44.5 mm (2)
  • 1.81 in;45.9 mm (2)
  • 2.31 in;58.7 mm (2)
  • 2.63 in;66.8 mm (1)
  • 3.19 in;81 mm (2)
  • 4 in (4)
  • 4.12 (1)
  • 4.38 in;111.3 mm (1)
  • Show More...

• Angle

  

  • 90 ° (17)
  • Straight (5)
  • Show More...

• Thread Size

  

  • 1 in (2)
  • 1 in NPT (2)
  • 1/2 in (4)
  • 1/2 in NPT (2)
  • 1-1/2 in NPT (1)
  • 1-1/4 in NPT (2)
  • 2 in NPT (2)
  • 3 in NPT (1)
  • 3/4 in (2)
  • 3/4 in NPT (2)
  • Show More...

• Number Of Gangs

  

  • 1 (35)
  • 2 (2)
  • 3 (1)
  • Show More...

• Number Of Hubs

  

  • 1 (2)
  • 2 (6)
  • 3 (7)
  • 7 (1)
  • Show More...

• Enclosure Type

  

  • Class I Div 2;Class II Div 1 and 2;Class III;NEMA 3R (8)
  • Class I Group A B C D;Class II Group E F G;Class III (5)
  • Conduit Outlet Box (1)
  • NEMA FB-1 (20)
  • Show More...

• Knockout Size

  

  • 1/2 in (10)
  • 1/2 in (Bottom) (2)
  • 1/2 in (Bottom);1/2 in (Side) (4)
  • 1/2 in (Bottom);1/2 in (Side);3/4 in (End) (1)
  • 1/2 in (Bottom);2-1/32 in (Bottom);1/2 in (Side);2-1/32 in (End) (2)
  • 1/2 in (Bottom);3/4 in (Bottom);1 in (Side) (2)
  • 1/2 in (Bottom);3/4 in (Bottom);1/2 in (Side);3/4 in (Side) (1)
  • 1/2 in (Bottom);3/4 in (Bottom);3/4 in (Side) (1)
  • 1/2 in (Bottom);3/4 in (Side);3/4 in (End) (1)
  • 1/2 in (Side) (1)
  • 1/2 in (Side);3/4 in (Side) (2)
  • 1/2 in;21/32 in (2)
  • 1/2 to 3/4 in (Conduit Concentric) (4)
  • 1-19/32 in (1)
  • 21/32 in (1)
  • Show More...

• Mounting Type

  

  • Box Mount (2)
  • Bracket Mount (1)
  • Horizontal Mount/Vertical Mount (3)
  • Knockout Mount (1)
  • Nail Mount (1)
  • Plaster Ear Mount (4)
  • Screw (8)
  • Screw Mount (46)
  • Surface Mount (1)
  • Threaded (10)
  • Vertical Mount (5)
  • Show More...

• Hub Size

  

  • 0.75 in;19.1 mm (1)
  • 1 (36)
  • 1/2 (27)
  • 1/2 in (6)
  • 1/4 (1)
  • 1-1/2 (27)
  • 1-1/2 in (1)
  • 1-1/4 (23)
  • 1-1/4 - 1-1/2 (3)
  • 1-1/4 in (1)
  • 2 (34)
  • 2 in (2)
  • 2-1/2 (1)
  • 2-1/2 - 3 (3)
  • 2-3/4 in (2)
  • 3 (2)
  • 3 in (1)
  • 3/4 (17)
  • 3/4 in (20)
  • 3-1/2 (1)
  • 3-1/2 - 4 (1)
  • Show More...

• Hub Location

  

  • 90º (4)
  • Side (1)
  • Straight (1)
  • Tee Side (5)
  • Show More...

• Configuration

  

  • C (1)
  • LB (4)
  • T (3)
  • TB (2)
  • Show More...

• Width

  

  • 0.42 in;10.7 mm (1)
  • 1 in (1)
  • 1.25 in;31.7 mm (1)
  • 1.31 (2)
  • 1.31 in;33.3 mm (2)
  • 1.38 (2)
  • 1.38 in (2)
  • 1.5 in;38.1 mm (1)
  • 1.53 in;38.9 mm (2)
  • 1.56 (3)
  • 1.56 in (2)
  • 1.74 (1)
  • 1.74 in;44.2 mm (1)
  • 1.75 in (1)
  • 1.81 (2)
  • 1.88 (2)
  • 1-1/2 in (3)
  • 1-13/16 in (2)
  • 1-3/4 (2)
  • 1-7/8 in (1)
  • 2 (4)
  • 2 in (4)
  • 2.06 (2)
  • 2.06 in;52.3 mm (3)
  • 2.19 (5)
  • 2.26 in;57.4 mm (1)
  • 2.38 (1)
  • 2.44 (9)
  • 2.49 (2)
  • 2.49 in;63.2 mm (2)
  • 2.56 (2)
  • 2.63 (2)
  • 2.68 (2)
  • 2.68 in;68.1 mm (1)
  • 2.69 (1)
  • 2.79 (1)
  • 2.81 in (2)
  • 2.88 (1)
  • 2-1/2 (3)
  • 2-1/4 (4)
  • 2-1/8 in (3)
  • 2-1/8 in (Box) (5)
  • 2-3/4 (4)
  • 3 (5)
  • 3.1 (2)
  • 3.10 in;78.7 mm (1)
  • 3.13 (2)
  • 3.19 (6)
  • 3.31 (1)
  • 3.38 (1)
  • 3.5 (3)
  • 3.56 (2)
  • 3.83 (5)
  • 3.83 in;97.3 mm (1)
  • 3.88 (1)
  • 3-1/2 (10)
  • 3-5/8 in (1)
  • 4 in (31)
  • 4.06 (4)
  • 4.13 (3)
  • 4.19 (2)
  • 4.33 (1)
  • 4.33 in;110 mm (1)
  • 4.52 in (1)
  • 4.63 (1)
  • 4-1/2 (2)
  • 4-11/16 in (4)
  • 5.19 (1)
  • 5-1/4 (1)
  • 5-7/16 in (1)
  • Show More...

• Height

  

  • 1 in (4)
  • 1.38 (3)
  • 1.44 (1)
  • 1.63 (2)
  • 1.64 (1)
  • 1.64 in;41.7 mm (3)
  • 1.69 (1)
  • 1.88 (4)
  • 1.88 in;47.8 mm (3)
  • 1.94 (1)
  • 1.94 in (1)
  • 1/2 in (14)
  • 1-1/2 (1)
  • 1-1/2 in (11)
  • 1-1/4 in (1)
  • 1-3/4 (4)
  • 1-7/8 in (2)
  • 2 (5)
  • 2 in (2)
  • 2.06 (1)
  • 2.13 (1)
  • 2.14 (3)
  • 2.14 in;54.4 mm (1)
  • 2.31 (5)
  • 2.31 in (1)
  • 2.44 in;62 mm (1)
  • 2.56 (7)
  • 2.63 (1)
  • 2.69 in (1)
  • 2.78 in (1)
  • 2.80 in;71.1 mm (1)
  • 2.81 (1)
  • 2.88 (4)
  • 2.88 in;73.2 mm (1)
  • 2.97 (8)
  • 2.98 in;75.7 mm (1)
  • 2-1/2 (2)
  • 2-1/2 in (2)
  • 2-1/4 (6)
  • 2-1/8 in (7)
  • 2-3/4 (5)
  • 2-3/4 in (1)
  • 3.13 (5)
  • 3.31 (3)
  • 3.38 (3)
  • 3.56 (1)
  • 3.63 (1)
  • 3.65 (3)
  • 3.65 in;92.7 mm (1)
  • 3.69 (2)
  • 3.74 in;95 mm (1)
  • 3.75 in (1)
  • 3.88 (1)
  • 3.89 in;98.8 mm (1)
  • 3/4 in (1)
  • 3-1/2 in (5)
  • 3-1/4 (2)
  • 4 in (Box) (5)
  • 4.19 (1)
  • 4.50 in;114.3 mm (1)
  • 4.56 (1)
  • 4.63 (1)
  • 4-1/4 (2)
  • 5.19 (1)
  • 5.88 (1)
  • 5.88 in (2)
  • 5/8 in (2)
  • 5-1/4 (1)
  • 6.03 (1)
  • 6.69 in;169.9 mm (1)
  • 7.39 (1)
  • 7.48 (1)
  • Show More...

• Sub Brand

  

  • EGS (24)
  • ETP (6)
  • Unilets(TM) (5)
  • Show More...

• Special Features

  

  • 0.38 IN Dia X 1.3 IN Length, For Flexible Metal Conduit (1)
  • 0.83 IN Dia X 1.63 IN Length, For Flexible Metal Conduit (1)
  • 1 1/2 IN Depth, For 4 IN Boxes, (4) 1/2 IN Knockouts (1)
  • 1 Gang, Hub Size 1 IN, 2-5/8 IN deep, With Closure Plugs, Ground Screw And Mounting Lugs (1)
  • 1 Gang, Hub Size 1/2 IN, 2 IN deep, With Closure Plugs, Ground Screw And Mounting Lugs (1)
  • 1 IN Trade Size, Type LC Aluminum Threaded Conduit Body, Maximum No. of Conductors 3 - #4 AWG, Volume 12.20 IN³, For Use With Rigid and IMC Conduit, Furnished With Stamped Aluminum Cover and Neoprene Gasket (2)
  • 1.06 IN Dia X 1.5 IN Length, 0.48 IN Thread Length, Flexible Metal Conduit (1)
  • 1.28 IN Dia X 1.49 IN Length, 0.53 IN Thread Length, For Liquidtight Flexible Metal Conduit and Type B Non-Metallic Conduit, Liquidtight/Raintight/Oiltight (1)
  • 1/2 IN Trade Size, Type LL Aluminum Threaded Conduit Body, Volume 4.35 IN³, For Use With Rigid and IMC Conduit, Furnished With Stamped Aluminum Cover and Neoprene Gasket (1)
  • 10.5 IN Depth X 7 IN Height, (3) 7/8 IN, (1) 1 IN, (3) 1 5/16 IN Holes, Weather Resistant, For Threaded/Unthreaded Rigid Conduit, IMC/EMT Service Masts (1)
  • 1-1/2 IN Trade Size, Type LC Aluminum Threaded Conduit Body, Maximum No. of Conductors 3 - #1/0AWG, Volume 33.50IN³, For Use With Rigid and IMC Conduit, Furnished With Stamped Aluminum Cover and Neoprene Gasket (1)
  • 1-1/2 IN Trade Size, Type LL Aluminum Threaded Conduit Body, Maximum No. of Conductors 3 - #1/0AWG, Volume 35.80 IN³, For Use With Rigid and IMC Conduit, Furnished With Stamped Aluminum Cover and Neoprene Gasket (1)
  • 1-1/2 IN Trade Size, Type LR Aluminum Threaded Conduit Body, Maximum No. of Conductors 3 - #1/0AWG, Volume 35.80 IN³, For Use With Rigid and IMC Conduit, Furnished With Stamped Aluminum Cover and Neoprene Gasket (1)
  • 1-1/2 IN Trade Size, Type TC Aluminum Threaded Conduit Body, Maximum No. of Conductors 3 - #1/0AWG, Volume 33.10 IN³, For Use With Rigid and IMC Conduit, Furnished With Stamped Aluminum Cover and Neoprene Gasket (1)
  • 1-1/4 IN Trade Size, Type LC Aluminum Threaded Conduit Body, Maximum No. of Conductors 3 - #2 AWG, Volume 33.40IN³, For Use With Rigid and IMC Conduit, Furnished With Stamped Aluminum Cover and Neoprene Gasket (1)
  • 1-1/4 IN Trade Size, Type LL Aluminum Threaded Conduit Body, Maximum No. of Conductors 3 - #2 AWG, Volume 35.40 IN³, For Use With Rigid and IMC Conduit, Furnished With Stamped Aluminum Cover and Neoprene Gasket (1)
  • 1-1/4 IN Trade Size, Type LR Aluminum Threaded Conduit Body, Maximum No. of Conductors 3 - #2 AWG, Volume 35.80 IN³, For Use With Rigid and IMC Conduit, Furnished With Stamped Aluminum Cover and Neoprene Gasket (1)
  • 1-1/4 IN Trade Size, Type TC Aluminum Threaded Conduit Body, Maximum No. of Conductors 3 - #2 AWG, Volume 33.10 IN³, For Use With Rigid and IMC Conduit, Furnished With Stamped Aluminum Cover and Neoprene Gasket (1)
  • 2 1/8 IN Depth, For 4 11/16 IN Boxes, (4) 1/2 IN, (6) 3/4 IN Knockouts (1)
  • 2 Gang, Self Closing Cover, Gasket and Mounting Hardware included (1)
  • 2 IN Trade Size, Type LC Aluminum Threaded Conduit Body, Maximum No. of Conductors 3 - #4/0AWG, Volume 69.50 IN³, For Use With Rigid and IMC Conduit, Furnished With Stamped Aluminum Cover and Neoprene Gasket (1)
  • 2 IN Trade Size, Type LL Aluminum Threaded Conduit Body, Maximum No. of Conductors 3 - #4/0AWG, Volume 69.70 IN³, For Use With Rigid and IMC Conduit, Furnished With Stamped Aluminum Cover and Neoprene Gasket (1)
  • 2 IN Trade Size, Type TC Aluminum Threaded Conduit Body, Maximum No. of Conductors 3 - #4/0AWG, Volume 67.00 IN³, For Use With Rigid and IMC Conduit, Furnished With Stamped Aluminum Cover and Neoprene Gasket (1)
  • 2.15 IN Length X 2.4 IN Height, 0.53 IN Thread Length, For Liquidtight Flexible Metal Conduit and Type B Non-Metallic Conduit, Liquidtight/Raintight/Oiltight (1)
  • 2.52 IN Dia X 2.09 IN Length, 0.71 IN Thread Length, Flexible Metal Conduit (1)
  • 2-1/2 IN Trade Size, Type LB Aluminum Threaded Conduit Body, Maximum No. of Conductors 3 - #4/0 AWG, Volume 153.00 IN³, For Use With Rigid and IMC Conduit, Furnished With Cover and Gasket (1)
  • 3.24 IN Length X 1.22 IN Width X 1.42 IN Height, Raintight, For Raceway, Wire Pulling, With Cover And Gasket (1)
  • 3.57 IN Length X 1.4 IN Width X 2.68 IN Height, Raintight, For Raceway, Wire Pulling, With Cover And Gasket (1)
  • 3.64 IN Depth X 2.8 IN Height, (2) 3/8 IN, (3) 13/32 IN Holes, Weather Resistant, For Threaded/Unthreaded Rigid Conduit, IMC/EMT Service Masts (1)
  • 3-1/2 IN Trade Size, Type LB Aluminum Threaded Conduit Body, Maximum No. of Conductors 3 - #350MCM, Volume 304.90 IN³, For Use With Rigid and IMC Conduit, Furnished With Cover and Gasket (1)
  • 3-1/2 IN Trade Size, Type LB Aluminum Threaded Conduit Body, Maximum No. of Conductors 3 - #350MCM, Volume 308.00 IN³, For Use With Rigid and IMC Conduit, Furnished With Cover and Gasket (1)
  • 4 - 1 Inch Close Up Plug (1)
  • 4 - 1/2 Inch Close Up Plug (1)
  • 4 11/16 IN Square, 1 1/4 IN Raised Double Device Cover (1)
  • 4 11/16 IN Square, 1/2 IN Raised Double Device Cover (1)
  • 4 11/16 IN Square, 1/2 IN Raised Single Device Cover (1)
  • 4 11/16 IN Square, 1/2 IN Raised Single Device Cover with Ears 2 3/4 IN C to C (1)
  • 4 11/16 IN Square, 1/4 IN Raised Single Device Cover (1)
  • 4 11/16 IN Square, 5/8 IN Raised Double Device Cover (1)
  • 4 11/16 IN Square, 5/8 IN Raised Single Device Cover (1)
  • 4 IN Square Flat Double Device Cover (1)
  • 4 IN Square, 1/2 IN Raised Cover for One Single Flush Receptacle 2 1/2 IN DIA (1)
  • 4 IN Square, 1 1/2 IN Raised Double Device Cover (1)
  • 4 IN Square, 1 1/2 IN Raised Single Device Tile Cover (1)
  • 4 IN Square, 1 1/4 IN Raised Double Device Tile Cover (1)
  • 4 IN Square, 1 1/4 IN Raised Single Device Tile Cover (1)
  • 4 IN Square, 1 IN Raised Single Device Drawn Tile Cover (1)
  • 4 IN Square, 1 IN Raised Single Device Tile Cover (1)
  • 4 IN Square, 1/2 IN Raised Cover for One Toggle Switch, One Single Flush Receptacle 1 13/32 IN DIA (1)
  • 4 IN Square, 1/2 IN Raised Cover for Two Single Flush Receptacles 1 13/32 IN DIA (1)
  • 4 IN Square, 1/4 IN Raised Double Device Cover (1)
  • 4 IN Square, 1/4 IN Raised Single Device Cover Drawn (1)
  • 4 IN Square, 2 IN Raised Double Device Cover (1)
  • 4 IN Square, Flat Single Device Cover (1)
  • 4-11/16 IN Square , 1/2 IN Raised cover for One GFCI Device (1)
  • 4Q fittings have plain throat (non-insulated);Bonding wedge locknuts are recommended in hazardous locations;Compact, slim diameter with small turning radius;Furnished with locknut and knockout sealing ring;Hot dip or mechanically galvanized finish optionally available;Inspection windows in ferrule to ensure full en;Intrinsically safe;Liquidtight/raintight/oiltight/concretetight;Long ferrule prevents pullout and tight bend conduit pop-out;O-Z/Gedney fittings are used with liquidtight flexible metal conduit (3)
  • 90 DEG hub placement;Accesses opening: Right side;Allow connections for branch runs;Complete interchangeability with other manufacturers style 5 or 35 conduit bodies;Connect and change direction of conduit runs;internal volume and maximum wire capacity clearly marked on castings;Make bends in conduit system;Malleable iron suitable for use in concrete;Permit access to conductors for maintenance;Provide openings for splicing;Raintight when used with gasketed covers;Serve as pulling fittings;Suitable for wet (1)
  • Accommodate sealing, dome, hub and union hub covers and canopies;Accurately tapped, tapered hub threads for tight, rigid joints and ground continuity;Complies with a wide range of classified area requirements;Connect conduit lengths and change direction of conduit runs;Corrosion-resistant ideal indoors or out;Covers have pry notches for bar or wrench;Explosionproof, dust-ignitionproof;For pulling of wires;Function as sealing fittings when used with sealing covers;Furnished with copperfree (4/10 of 1 PCT ma (14)
  • Accommodate wiring devices such as switches and receptacles;Accurately tapped, tapered threads for tight, rigid joints, ground continuity;Both malleable iron and aluminum boxes have ridge top construction for positive cover/gasket/box fit;Corrosion-resistant ideal for indoor and outdoor installations;Internal grounding screws standard;Malleable iron for high tensile strength and ductility provides greater resistance to impact and shock;Permit access to conductors for maintenance;Provide excellent service i (28)
  • Accurately tapped, tapered hub threads for tight, rigid joints and ground continuity;Compact round box for use where space is limited;Complies with a wide range of classified area requirements;Connect conduit lengths and change direction of conduit runs;Corrosion-resistant: ideal indoors or out;Explosionproof, dust-ignitionproof, raintight;For pulling of wires;Furnished with copperfree (4/10 of 1 PCT maximum) aluminum epoxy powder coat cover;Furnished with internal ground screw;General purpose wiring;Inter (1)
  • Accurately tapped, tapered hub threads for tight, rigid joints and ground continuity;Complies with a wide range of classified area requirements;Connect conduit lengths and change direction of conduit runs;Corrosion-resistant: ideal indoors or out;Explosionproof, dust-ignitionproof, raintight;For pulling of wires;Furnished with internal ground screw;Internal ground screw standard;Internally threaded aluminum bodies with externally threaded aluminum form 1 covers, has 7 hubs - 2 on each of the sides, 1 on th (1)
  • Accurately tapped, tapered threads for tight, rigid joints and excellent ground continuity;Allow connections for branch runs;Completely interchangeable with Crouse-Hinds Form 7 bodies, gaskets and covers;Connect and change direction of conduit runs;Equivalent FM7 and Form 7 units have identical applications and installation dimensions;Fits flush and snug against flat surfaces for more stable installation;Flat back design provides greater cubic content for easier wire pulling and more room for splicing;Hub (73)
  • Accurately tapped, tapered threads for tight, rigid joints and excellent ground continuity;Allow connections for branch runs;Connect and change direction of conduit runs;Exclusive built-in easy-pulling rollers to facilitate cable pulling through hubs and help eliminate cable damage;High tensile strength and ductility, high corrosion resistance, high impact and shock resistance;Make bends in conduit system;Permit access to conductors for maintenance;Provide openings for splicing;Serve as pulling fittings;Si (4)
  • Accurately tapped, tapered threads for tight, rigid joints and excellent ground continuity;Allow connections for branch runs;Connect and change direction of conduit runs;Form 85 copper free aluminum Unilets are lightweight, self oxidizing, self-renewing and offer a high corrosion resistance;Internal volume and maximum wire capacity clearly marked on castings;Lightweight aluminum facilitates shipping, handling and installing;Make bends in conduit system;Permit access to conductors for maintenance;Provide op (4)
  • Accurately tapped, tapered threads for tight, rigid joints and excellent ground continuity;Allow connections for branch runs;Connect and change direction of conduit runs;Form 85 copperfree aluminum Unilets are lightweight, self oxidizing, self-renewing and offer a high corrosion resistance;Internal volume and maximum wire capacity clearly marked on castings;Lightweight aluminum facilitates shipping, handling and installing;Make bends in conduit system;Permit access to conductors for maintenance;Provide ope (4)
  • Accurately tapped, tapered threads for tight, rigid joints and excellent ground continuity;Allow connections for branch runs;Connect and change direction of conduit runs;High tensile strength and ductility, high corrosion resistance, high impact and shock resistance;Make bends in conduit system;Permit access to conductors for maintenance;Provide openings for splicing;Serve as pulling fittings;Sizes with flat-back design ideal where fitting is mounted flat against surface;Smooth, rounded integral bushings i (29)
  • Accurately tapped, tapered threads for tight, rigid joints and ground continuity;Close radius type for sealing vertical or horizontal con;Explosionproof, dust-ignitionproof, raintight;For preventing passage of gases, vapors or flames from one portion of conduit system to another;Removable nipple in male sealing fitting may be used interchangeably in top or bottom hub;Required in Class I, Division 1 and 2 locations at the boundary where conduit leaves classified location;Required in Class I, Division 1 and (1)
  • Accurately tapped, tapered threads for tight, rigid joints and ground continuity;Concentric ring interlocked design sizes makes possible smaller diameter, allowing use in tighter spaces;Explosionproof, dust-ignitionproof;Smooth, rounded integral bushing in each hub protects conductor insulation;UNF unions are used for joining conduit and connecting conduit to enclosures, Facilitates modifications, permits removal of enclosures without turning or removal of conduit (3)
  • Accurately tapped, tapered threads for tight, rigid joints and ground continuity;Covers have captive stainless steel screws to speed installation, prevent freezing of screws;Larger body size facilitates pulling of large and heavy conductors;Length Requirement: distance between centerline of each hub bushing (conduit stop) exceeds eight times the trade diameter of the conduit per NEC 314.28(A)(1);Smooth, rounded integral bushing in each hub protects conductor insulation;Specially designed raised cast covers (1)
  • Accurately tapped, tapered threads for tight, rigid joints and ground continuity;Explosionproof, dust-ignitionproof, raintight;F;For preventing passage of gases, vapors or flames from one portion of conduit system to another;Required in Class I, Division 1 and 2 locations at the boundary where conduit leaves classified location;Required in Class I, Division 1 and 2 locations where 2 IN or larger conduit enters enclosure, fitting housing terminals, splices or taps;Required in Class I, Division 1 and 2 locat (8)
  • Accurately tapped, tapered threads for tight, rigid joints and ground continuity;Explosionproof, dust-ignitionproof, raintight;For preventing passage of gases, vapors or flames from one portion of conduit system to another;Required in Class I, Division 1 and 2 locations at the boundary where conduit leaves classified location;Required in Class I, Division 1 and 2 locations where 2 IN or larger conduit enters enclosure, fitting housing terminals, splices or taps;Required in Class I, Division 1 and 2 locatio (1)
  • Accurately tapped, tapered threads for tight, rigid joints and ground continuity;Explosionproof, dust-ignitionproof;Smooth, rounded integral bushing in each hub protects conductor insulation (8)
  • Also permits adequate access to cover screws for easy attachment of cover to FS, FD or other device box;Covers open all the way, permitting easy plug insertion and withdrawal;Duplex units accommodate one receptacle and one toggle switch or any combination of the two;Large head cover screws are captivated;Single cover units accommodate NEMA configuration receptacles for locking or non-locking blade plugs, or toggle switches;Unique design of spring door hinge provides smooth action;Wet location (1)
  • Approved for use in wet locations;Stainless steel screws;The cover is secured with clips, not screws;Unique Wedge-Lok clip cover design allows easy removal without damaging the conduit body;Wiring capacity: 0.4 CU-IN as per NEC 314.16(A) (2)
  • Approved for use in wet locations;Stainless steel screws;The cover is secured with clips, not screws;Unique Wedge-Lok clip cover design allows easy removal without damaging the conduit body;Wiring capacity: 0.8 CU-IN as per NEC 314.16(A) (2)
  • Approved for use in wet locations;Stainless steel screws;The cover is secured with clips, not screws;Unique Wedge-Lok clip cover design allows easy removal without damaging the conduit body;Wiring capacity: 1.3 CU-IN as per NEC 314.16(A) (1)
  • Approved for use in wet locations;Stainless steel screws;The cover is secured with clips, not screws;Unique Wedge-Lok clip cover design allows easy removal without damaging the conduit body;Wiring capacity: 2 CU-IN as per NEC 314.16(A) (2)
  • Approved for use in wet locations;Stainless steel screws;The cover is secured with clips, not screws;Unique Wedge-Lok clip cover design allows easy removal without damaging the conduit body;Wiring capacity: 3 CU-IN as per NEC 314.16(A) (2)
  • Approved for use in wet locations;Stainless steel screws;The cover is secured with clips, not screws;Unique Wedge-Lok clip cover design allows easy removal without damaging the conduit body;Wiring capacity: 4.8 CU-IN as per NEC 314.16(A) (2)
  • Approved for use in wet locations;Stainless steel screws;The cover is secured with clips, not screws;Unique Wedge-Lok clip cover design allows easy removal without damaging the conduit body;Wiring capacity: 9.7 CU-IN as per NEC 314.16(A) (2)
  • Benefit from superior sealing, reduced inventory parts and faster installation times;Can be used as replacement covers for installed bodies or in new installations;Captive pan-head screws;Form-IN-Place covers with integral gasket are approved for use in wet locations;High-strength, corrosion and weather resistant;Wedge-Lok clips (FM7 only) provide superior screwdriver torque and cover seating;Wiring capacity: 0.3 CU-IN as per NEC 314.16(A) (1)
  • Benefit from superior sealing, reduced inventory parts and faster installation times;Can be used as replacement covers for installed bodies or in new installations;Captive pan-head screws;Form-IN-Place covers with integral gasket are approved for use in wet locations;High-strength, corrosion and weather resistant;Wedge-Lok clips (FM7 only) provide superior screwdriver torque and cover seating;Wiring capacity: 0.5 CU-IN as per NEC 314.16(A) (1)
  • Benefit from superior sealing, reduced inventory parts and faster installation times;Can be used as replacement covers for installed bodies or in new installations;Captive pan-head screws;Form-IN-Place covers with integral gasket are approved for use in wet locations;High-strength, corrosion and weather resistant;Wedge-Lok clips (FM7 only) provide superior screwdriver torque and cover seating;Wiring capacity: 1.3 CU-IN as per NEC 314.16(A) (1)
  • Benefit from superior sealing, reduced inventory parts and faster installation times;Can be used as replacement covers for installed bodies or in new installations;Captive pan-head screws;Form-IN-Place covers with integral gasket are approved for use in wet locations;High-strength, corrosion and weather resistant;Wedge-lok clips (FM7 only) provide superior screwdriver torque and cover seating;Wiring capacity: 2 CU-IN as per NEC 314.16(A) (1)
  • Benefit from superior sealing, reduced inventory parts and faster installation times;Can be used as replacement covers for installed bodies or in new installations;Captive pan-head screws;Form-IN-Place covers with integral gasket are approved for use in wet locations;High-strength, corrosion and weather resistant;Wedge-Lok clips (FM7 only) provide superior screwdriver torque and cover seating;Wiring capacity: 2.3 CU-IN as per NEC 314.16(A) (1)
  • Benefit from superior sealing, reduced inventory parts and faster installation times;Can be used as replacement covers for installed bodies or in new installations;Captive pan-head screws;Form-IN-Place covers with integral gasket are approved for use in wet locations;High-strength, corrosion and weather resistant;Wedge-Lok clips (FM7 only) provide superior screwdriver torque and cover seating;Wiring capacity: 2.8 CU-IN as per NEC 314.16(A) (1)
  • Color coded identification label clearly states the catalog number and minimum-maximum cable diameter range for which the connector is designed;Copper free (4/10 of 1 PCT or less) aluminum cap;For use in wet or dry locations sealing electrical connections against dust and dirt, oil, water or other atmosphere containing moisture;Neoprene sealing grommet;Neoprene sealing grommet firmly but safely grips cable jacket providing strain relief while protecting internal wiring connections against external tension (5)
  • Color coded identification label clearly states the catalog number and minimum-maximum cable diameter range for which the connector is designed;For use in wet or dry locations sealing electrical connections against dust and dirt, oil, water or other atmosphere containing moisture;Machined steel cap;Neoprene sealing grommet;Neoprene sealing grommet firmly but safely grips cable jacket providing strain relief while protecting internal wiring connections against external tension on cable or cord;Steel or Tefl (5)
  • Compact design with small turning radius;Copperfree (4/10 of 1 PCT of copper or less) aluminum;Ferrule provides maximum surface contact for better sealing and a continuous, permanent, positive metal-to-metal ground;Full, machined tapered threads (NPT);High corrosion resistance;Machine tool building, motor and transformer terminations, robotics assembly, air conditioning equipment installation and other applications that require flexibility and protection against entry of liquids, vapors or solids;Seals out (6)
  • Compact design with small turning radius;Ferrule provides maximum surface contact for better sealing and a continuous, permanent, positive metal-to-metal ground;High corrosion resistance;Polypropylene sealing ring with locknut standard;Seals out oil, water, dust, dirt and fumes;Steel compression nut;Suitable for wet locations;Unique long ferrule with more pronounced threads provides over four times UL pull-out requirements (3)
  • Compact design with small turning radius;Ferrule provides maximum surface contact for better sealing and a continuous, permanent, positive metal-to-metal ground;High corrosion resistance;Polypropylene sealing ring with locknut standard;Seals out oil, water, dust, dirt and fumes;Suitable for wet locations;Unique long ferrule with more pronounced threads provides over four times UL pull-out requirements (10)
  • Concentric and Eccentric Knockouts;Use in Fire-Rated Assemblies (54)
  • Configuration Single Receptacle 1 13/32 IN DIA, For 4 X 2 1/8 IN Boxes (1)
  • Constructional Feature Concrete Tight Seal Against Oil, Water, Dirt and Chemical (1)
  • Constructional Feature Rain Tight, Oil Tight;Enclosure Rating Class I Div 2 (7)
  • Corrosion Resistant;Weatherproof;Rain Tight;Dust Tight (3)
  • Cover tightens on largest perimeter of gasket and fits snugly against portion of gasket that wraps around ridge top of box;Covers have captive stainless steel screws to speed installation, prevents loss of screws (1)
  • Cover tightens on largest perimeter of gasket and fits snugly against portion of gasket that wraps around ridge top of box;Covers have captive stainless steel screws to speed installation, prevents loss of screws;Dry Location;Less gasket (2)
  • Cover tightens on largest perimeter of gasket and fits snugly against portion of gasket that wraps around ridge top of box;Covers have captive stainless steel screws to speed installation, prevents loss of screws;Less gasket (8)
  • Cover tightens on largest perimeter of gasket and fits snugly against portion of gasket that wraps around ridge top of box;Covers have captive stainless steel screws to speed installation, prevents loss of screws;Wet location (2)
  • Covers have captive stainless steel screws to speed installation, prevent freezing of screws;Furnished with receptacle, neoprene gasket, stainless steel screws;Receptacle cover has threaded aluminum cap;Receptacle takes U shaped or round grounding contact plugs;Weatherproof, raintight and dust-tight (1)
  • Domed to provide extra wiring space;Stainless steel fastening screws;Wiring capacity: 0.5 CU-IN as per NEC 314.16(A) (1)
  • Domed to provide extra wiring space;Stainless steel fastening screws;Wiring capacity: 18 CU-IN as per NEC 314.16(A) (1)
  • Domed to provide extra wiring space;Stainless steel fastening screws;Wiring capacity: 2.5 CU-IN as per NEC 314.16(A) (1)
  • Domed to provide extra wiring space;Stainless steel fastening screws;Wiring capacity: 6.5 CU-IN as per NEC 314.16(A) (1)
  • Ease of assembly and disassembly of STNM connectors permits make-up of harnesses in advance for fast, simple connections during production line assemblies;Eliminates common connection problems and assures a liquidtight seal against oil, water, dirt and chemicals;It cannot bend or twist the conduit and thereby protects wiring;The nut rides only on the sleeve and not on the conduit;The positive, pull out proof seal formed by a STNM connector begins with its deep-threaded ferrule that bites into the inner wal (10)
  • Enclosure Type Class I Div 2;Constructional Feature Liquid Tight, Rain Tight, Oil Tight, Concrete Tight (2)
  • Explosionproof;Corrosion Resistant;Dust Ignitionproof;Rain Tight (1)
  • Explosionproof;Dust Ignitionproof;Rain Tight (3)
  • Explosionproof;Dust-Ignitionproof;Smooth;Rounded Integral Bushing (5)
  • Flat Cover With 1/2 IN Conduit Knockouts, For 4 IN Octagon and Round Boxes (1)
  • For Two-Hour Fire Rated Walls (5)
  • Form 35 Malleable Iron Unilets;High Tensile Strength and Ductility;High Corrosion-Resistant;High Impact Resistant;Shock Resistant (1)
  • Furnished with Internal Ground Screw and O-Ring;Explosionproof;Dust-Ignitionproof (1)
  • Furnished with Locknut (1)
  • Furnished with locknut; Male hub threads-NPS (2)
  • Gangable, With 1/2 IN Conduit Knockouts, 2-1/2 In Deep, Four Nail Holes Each Side, Side Leveling Bosses (1)
  • Gangable, With 1/2 IN Conduit Knockouts, 2-1/2 In Deep, Plain Vertical Bracket Set Back 3/4 IN (1)
  • Gangable, With 1/2 IN Conduit Knockouts, 2-1/2 In Deep, Plaster Ears, Old Work Support Clamps (1)
  • Gangable, With 1/2 IN Conduit Knockouts, With Plaster Ears, 2 IN Deep (1)
  • Hub Size 3/4 IN, 1.62 IN deep, With Closure Plugs, Ground Screw And Mounting Lugs (1)
  • Liquid Tight;Strain Relief (8)
  • NEC/CEC - Suitable for use in the following Hazardous Locations:Class I, Division 2 per NEC 501.10(B)(4) (5)
  • Neoprene (1)
  • Non Gangable, With 21/32 IN Openings on Ends, Nonmetallic Sheathed CL-26 Cable Clamps (1)
  • Protect fixture against wind and vibration damage; Cushion type for added protection where lighting fixtures are subjected to vibration; Ball type swivel joint permits 20 DEG swing from vertical; Support fixtures with a maximum weight of 50 LB; For use with threaded rigid metal conduit and IMC (1)
  • Provide strain relief to protect the cord or cable;Remove enough jacket to get conductors through throat ID;UL Listed NEMA 4, 6 and 12 when installed into a NPT threaded entry or UL listed conduit hub;Watertight/oiltight (2)
  • Provide strain relief to protect the cord or cable;UL listed NEMA 4, 6 and 12 when installed into a NPT threaded entry or UL listed conduit hub;Watertight/oiltight (7)
  • Rugged Continuous and Seamless Diecast Construction Prevents Entry of Dirt, Dust and Moisture;Powder Coating is Applied for Uniform Cosmetic Coating and Weatherproof Durability (1)
  • Seals Out Oil, Water, Dust, Dirt and Fumes;Unique Long Ferrule with More Pronounced Threads Provides Over Four Times Ul Pull-Out Requirements;Ferrule Provides Maximum Surface Contact for Better Sealing and a Continuous, Permanent, Positive Metal-To-Metal Ground;Liquidtight/Raintight/Oiltight;Compact Design with Small Turning Radius (3)
  • Self Closing Cover, Gasket And Mounting Hardware included (2)
  • Self Closing Power Outlet Cover, 2.125 IN opening, Gasket and Mounting Hardware included, Hasp Diameter 3/16 IN, Lock Not Furnished (1)
  • Smooth and Rounded Integral Bushings in Hubs Protect Conductor Insulation;Accurately Tapped;Tapered Threads;Rigid Joints and Excellent Ground Continuity;Easier Wire Pulling and More Room for Sp (2)
  • Smooth and Rounded Integral Bushings in Hubs Protect Conductor Insulation;Accurately Tapped;Tapered Threads;Rigid Joints and Excellent Ground Continuity;Form 35 Malleable Iron Unilets;High Tensile Strength and Ductility;High Corrosion-Resistant (7)
  • Stainless steel fastening screws (1)
  • Stainless steel fastening screws;Wiring capacity: 1 CU-IN as per NEC 314.16(A) (1)
  • Steel Backed Neoprene (2)
  • ST-SR wire mesh strain relief with cap can be substituted for any related trade size ST Series cap to provide integral strain relief (2)
  • Threaded Hubs (17)
  • Unique Wedge-Lok Clip Cover Design Allows Easy Removal Without Damaging The Conduit Body (3)
  • Wedge-Lok (3)
  • With 1 1/4, 3/4 And 1/2 IN Conduit Knockouts, Raised Grounding Boss (1)
  • With 1, 3/4 And 1/2 IN Conduit Knockouts, Raised Grounding Boss (1)
  • With 1/2 And 21/32 IN Conduit Knockouts, Nonmetallic Sheathed CL 26 Cable Clamps (3)
  • With 1/2 And 21/32 IN Conduit Knockouts, Plain Vertical Bracket Set Flush With Front of Box (1)
  • With 1/2 And 3/4 IN Concentric Conduit Knockouts, Four Gang (2)
  • With 1/2 And 3/4 IN Concentric Conduit Knockouts, Three Gang (1)
  • With 1/2 and 3/4 IN Conduit Knockouts, 1-1/2 IN Deep (1)
  • With 1/2 and 3/4 IN Conduit Knockouts, 2-1/8 IN Deep (1)
  • With 1/2 Eccentric And 21/32 IN Conduit Knockouts, Deep, Welded, Plain Vertical Bracket (1)
  • With 1/2 IN Conduit Knockouts, Drawn Box (1)
  • With 1/2 IN Conduit Knockouts, Drawn Box, Raised Grounding Boss, Plain Vertical Bracket (1)
  • With 3/4 And 1/2 IN Conduit Knockouts, Raised Grounding Boss (2)
  • With 3/4 IN Conduit Knockouts, Raised Grounding Boss (1)
  • With Cover and Gasket (1)
  • Show More...

• Includes

  

  • (2) Screw (1)
  • Armored Cable (AC)/Metal Clad Cable (MCI, MCI-A, MCC)/Flexible Metal Conduit Clamp (1)
  • Grounding Screw;O-Ring;Cover (1)
  • Internal Ground Screw (2)
  • Internal Ground Screw and O-Ring (1)
  • Non-Metallic Sheathed Cable Clamp (2)
  • Nuts;Screws (11)
  • Stainless Steel Fastening Screw (5)
  • Stainless Steel Screw (3)
  • Stainless Steel Screws (3)
  • Show More...

• For Use With

  

  • Branch Circuit Wiring for Wet Locations;Damp Locations;Dry Locations (1)
  • Circuit Wiring (29)
  • Duplex Flush Receptacle with Spring Cover Mounting BOX (1)
  • Flexible Type Neoprene;Hypalon and PVC Jacketed Power or Control Cord and Cable (8)
  • FM7 Unilet Conduit Outlet Bodies (1)
  • For 4 in x 2-1/8 in Boxes (4)
  • Form35(R) Unilet(R) Conduit Outlet Body (5)
  • Liquidtight Flexible Metallic Conduit (12)
  • Liquidtight Flexible Non-Metallic Conduit (1)
  • Metallic Outlet Box (25)
  • Oval Service Entrance Cable;Nonmetallic Sheathed Cable (1)
  • Rigid Steel Conduit;Rigid Aluminum/IMC Conduit (1)
  • Rigid Steel;Rigid Aluminum and IMC Conduit (9)
  • Rigid Steel;Rigid Aluminum;IMC Conduit (4)
  • Rigid/Imc Conduit (24)
  • Threaded Metal Conduit (7)
  • Threaded Metal Conduit;IMC Conduit (2)
  • Threaded Rigid Met (1)
  • Threaded Rigid Metal Conduit and IMC (4)
  • Show More...

• Application

  

  • Clamp on Type For Use With Threaded or Unthreaded EMT or IMC Conduit (2)
  • Commercial (1)
  • Commercial;Industrial (1)
  • Commercial;Industrial;Hazardous Locations (1)
  • Commercial;Industrial;Wet Location (12)
  • Commercial;Interior;Exterior (1)
  • Damp Locations;Wet Locations (29)
  • For 4 IN Square Boxes (1)
  • For Connecting Conduit To Conduit (3)
  • For Connecting To Type A Flexible Nonmetallic Conduit (10)
  • For Flexible Type Neoprene, Hypalon And PVC Jacketed Power Or Control Cord And Cable (10)
  • For FM7 Unilet Conduit Outlet Bodies (19)
  • For Form 35 Unilet Conduit Outlet Bodies (5)
  • For Form 85 Unilet Conduit Outlet Bodies (6)
  • For Liquidtight Flexible Metal Conduit (24)
  • For Rigid Conduit And IMC (1)
  • For Securing And Sealing Cords And Cables Entering Enclosures Or Raceways (9)
  • For Terminating Liquidtight Flexible Metal Conduit to a Enclosure (1)
  • For Terminating Liquidtight Flexible Metal Conduit to a Enclosure at a 90 Degree Angle (1)
  • For use with 0.50 inch FM7 conduit bodies. Seals and protects. (1)
  • For use with 2 Duplex Receptacle or Switches (1)
  • For use with 2 Single Receptacle or Switches (1)
  • For Use With Duplex Flush Receptacle With Spring Cover (1)
  • For Use With Duplex Flush Receptacles (1)
  • For Use With Non-Locking Blade Plugs (1)
  • For use with non-metallic sheathed cable (1)
  • For Use With Rigid Metal Conduit And IMC (1)
  • For Use With Rigid Steel, Rigid Aluminum Conduit And IMC (101)
  • For Use With Rigid Steel, Rigid Aluminum Conduit, IMC And EMT (8)
  • For Use With Single Gang Device Boxes (1)
  • For use with Single Receptacle or Switch (1)
  • For use with Single Receptacle, 20-50A (1)
  • For Use With Square Handle Toggle Switches (1)
  • For Use With Square Handle Tumbler Or Toggle Flush Switches (1)
  • For Use With Square Handle Tumbler Or Toggle Switches (3)
  • For Use With Standard 2 Or 3 Wire Duplex Receptacles (3)
  • For Use With Threaded Metal Conduit (16)
  • For Use With Threaded Metal Conduit And IMC (28)
  • For Use With Threaded Rigid Metal Conduit and IMC (16)
  • For Use With Unilets FS And FD Single Gang And Tandem Cast Hub Device Boxes (2)
  • For Use With Unilets FS And FD Single Gang And Tandem Cast Hub Ridge Top Boxes (1)
  • For Used To Cover Aluminum Conduit Body Opening (5)
  • For Used To Ground And Secure Nonmetallic Sheathed And Service Entrance Cable to Boxes And Enclosures (2)
  • For Wire Pulling Where a Raceway Changes Direction, To provide Access to the Inside of a Raceway (2)
  • General Purpose Wiring;Pulling of Wire (1)
  • Hazardous Location (8)
  • Hazardous Location;Acoustical;Ceiling and Partitioning;Electrical (1)
  • Hazardous Locations (7)
  • Indoor (1)
  • Provide a Liquidtight and Strain Relief Termination for Flexible Type Neoprene;Hypalon and PVC Jacketed Power or Control Cord and Cable;For use in Wet or Dry Locations Sealing Electrical Connections Against Dust and Dirt;Oil;Water or Other Atmosphere Containing Moisture (8)
  • Provides access to the interior of the raceway for wire pulling , splicing and maintenance, Allows connection of straight and branch conduit runs and 90 degree bends (18)
  • Provides positive seal between shoulder of connector and sheet metal enclosure. Used with 0.50 inch connector. (1)
  • Provides positive seal between shoulder of connector and sheet metal enclosure. Used with 0.75 inch connector. (1)
  • Pulling;Splicing (16)
  • Pulling;Splicing;Hazardous Locations (1)
  • Screw-In Connector for flexible metal conduit (2)
  • Serve as Pulling Fittings;Make Bends in Conduit System;Provide Openings for Splicing;Connect and Change Direction of Conduit Runs;Allow Connections for Branch Runs;Permit Access to Conductors for Maintenance (10)
  • Terminate;Splice;Tap Power Connectors (1)
  • Terminates flexible metal conduit to a knockout in a dry location box or enclosure (2)
  • Used to close a knockout in a weatherproof box (2)
  • Used to provide additional capacity needed for NEC box fill requirements. (1)
  • Wet Location (3)
  • Wiring Device;Conductor (1)
  • Wiring Device;Conductor;Indoor or Outdoor (2)
  • Show More...

• Package Quantity

  

  • 1 ct (1)
  • 1 CT;10 PK (3)
  • 1 CT;25 PK (3)
  • 10 CT (4)
  • 10 CT;50 PK (1)
  • 10 PK;2 CT (1)
  • 100 PK (7)
  • 100 PK;10 CT (1)
  • 100 PK;25 CT (1)
  • 2 CT;10 PK (1)
  • 20 CT (1)
  • 20 CT;100 PK (1)
  • 20 PK;5 CT (1)
  • 200 PK;50 CT (3)
  • 25 CT (10)
  • 25 CT;100 PK (3)
  • 25 CT;50 PK (3)
  • 25 PK (29)
  • 25 PK;1 CT (2)
  • 25 PK;5 CT (6)
  • 250 PK (1)
  • 3 CT;15 PK (1)
  • 5 CT (8)
  • 5 CT;20 PK (2)
  • 5 CT;25 PK (7)
  • 5 CT;50 PK (5)
  • 50 CT (2)
  • 50 CT;1 PK (1)
  • 50 CT;200 PK (3)
  • 50 PK (22)
  • 50 PK;1 CT (1)
  • 50 PK;10 CT (4)
  • 50 PK;5 CT (6)
  • 6 CT (1)
  • Show More...

• Weight

  

  • 0.02 lb/EA (1)
  • 0.04 lb/EA (1)
  • 0.052 lb/EA (1)
  • 0.06 lb/EA (1)
  • 0.08 lb/EA (2)
  • 0.09 lb/EA (3)
  • 0.1 lb/EA (3)
  • 0.12 lb/EA (1)
  • 0.13 lb/EA (1)
  • 0.14 lb/EA (1)
  • 0.18 lb/EA (2)
  • 0.2 lb/EA (1)
  • 0.21 lb/EA (1)
  • 0.26 lb/EA (1)
  • 0.296 lb/EA (1)
  • 0.3 lb/EA (4)
  • 0.37 lb/EA (1)
  • 0.4 lb/EA (5)
  • 0.41 lb/EA (1)
  • 0.53 lb/EA (1)
  • 0.55 lb/EA (1)
  • 0.6 lb/EA (3)
  • 0.65 lb/EA (1)
  • 0.69 lb/EA (1)
  • 0.7 lb/EA (1)
  • 0.8 lb/EA (2)
  • 0.86 lb/EA (1)
  • 0.93 lb/EA (1)
  • 1 lb/EA (1)
  • 1.06 lb/EA (1)
  • 1.08 lb/EA (1)
  • 1.17 lb/EA (1)
  • 1.2 lb/EA (1)
  • 1.25 lb/EA (1)
  • 1.33 lb/EA (1)
  • 1.41 lb/EA (1)
  • 1.5 lb/EA (2)
  • 1.72 lb/EA (1)
  • 1.8 lb/EA (1)
  • 1.9 lb/EA (1)
  • 10 kg/100;22 lb/100 (1)
  • 10 lb/100;4.54 kg/100 (1)
  • 10.3 kg/100;23 lb/100 (1)
  • 10.89 lb/100;24 kg/100 (2)
  • 11 lb/100;4.99 kg/100 (1)
  • 11.79 lb/100;26 kg/100 (2)
  • 12.70 lb/100;28 kg/100 (2)
  • 13.61 lb/100;30 kg/100 (1)
  • 131.5 kg/100;290 lb/100 (1)
  • 14.51 lb/100;32 kg/100 (4)
  • 14.97 lb/100;33 kg/100 (1)
  • 15.4 kg/100;34 lb/100 (1)
  • 15.88 lb/100;35 kg/100 (1)
  • 16.33 kg/100;36 lb/100 (1)
  • 16.33 lb/100;36 kg/100 (3)
  • 17.24 lb/100;38 kg/100 (1)
  • 17.7 kg/100;39 lb/100 (1)
  • 18 lb/100;8.16 kg/100 (1)
  • 18.14 lb/100;40 kg/100 (3)
  • 19.05 lb/100;42 kg/100 (2)
  • 19.96 kg/100;44 lb/100 (1)
  • 19.96 lb/100;44 kg/100 (3)
  • 2 lb/EA (5)
  • 2.08 lb/EA (1)
  • 2.22 lb/EA (1)
  • 2.89 lb/EA (1)
  • 20.41 lb/100;45 kg/100 (1)
  • 204.1 kg/100;450 lb/100 (1)
  • 21.32 lb/100;47 kg/100 (1)
  • 21.77 lb/100;48 kg/100 (1)
  • 23.59 lb/100;52 kg/100 (3)
  • 25.85 lb/100;57 kg/100 (1)
  • 26.31 lb/100;58 kg/100 (1)
  • 28.1 kg/100;62 lb/100 (1)
  • 28.58 lb/100;63 kg/100 (1)
  • 29.94 lb/100;66 kg/100 (2)
  • 3 lb (1)
  • 3.2 lb/EA (1)
  • 30.84 lb/100;68 kg/100 (1)
  • 32.66 lb/100;72 kg/100 (1)
  • 33.57 kg/100;74 lb/100 (1)
  • 34.93 lb/100;77 kg/100 (1)
  • 35.38 lb/100;78 kg/100 (1)
  • 36.74 lb/100;81 kg/100 (1)
  • 37.19 lb/100;82 kg/100 (1)
  • 38.1 kg/100;84 lb/100 (1)
  • 38.10 lb/100;84 kg/100 (2)
  • 39.01 lb/100;86 kg/100 (1)
  • 4.07 lb/EA (1)
  • 43.99 lb/100;97 kg/100 (1)
  • 44.30 lb;20.09 Kg (1)
  • 44.91 lb/100;99 kg/100 (1)
  • 47.17 lb/100;104 kg/100 (2)
  • 5 lb/EA (1)
  • 51.7 kg/100;114 lb/100 (1)
  • 51.71 kg/100;114 lb/100 (1)
  • 54.4 kg/100;120 lb/100 (1)
  • 57.15 lb/100;126 kg/100 (1)
  • 6.8 kg/100;15 lb/100 (1)
  • 65 lb;29.48 Kg (1)
  • 73.94 lb/100;163 kg/100 (1)
  • 74.8 kg/100;165 lb/100 (1)
  • 8 lb/100;4.54 kg/100 (2)
  • 88 lb/100;39.92 kg/100 (1)
  • 9.07 lb/100;20 kg/100 (1)
  • 9.98 lb/100;22 kg/100 (1)
  • Show More...

• Category Description

  

  • 4 SQ BOXES (65)
  • CORD CONNECTORS & CORD GRIPS (24)
  • FLEX & MC FITTINGS (6)
  • FORM 5 CONDULETS, COVERS, & GASKETS (92)
  • FORM 7, 8, CONDULETS, COVERS, & GASKETS (97)
  • FS BOXES AND COVERS (36)
  • Fuses & Fuse Accessories (9)
  • HANDY BOXES (12)
  • HAZARDOUS LOCATION FITTINGS (17)
  • HUB STYLE BOXES (GUAB, GUAT, ETC) (16)
  • Locknuts, Bushings, Re-Bushings, Re-Washers, Threaded Plugs, Knockout Plugs (13)
  • METALLIC FITTINGS (37)
  • NON-METALLIC FITTINGS (13)
  • OCTAGON BOXES (9)
  • ROMEX CONNECTORS (2)
  • SERVICE ENTRANCE FITTINGS: Weatherheads & Grounding Fittings & Ground Rods (2)
  • SLB'S & JAKE ELL'S (4)
  • STEEL BOXES & COVERS (14)
  • SWITCH BOXES (8)
  • WEATHERPROOF BOXES & COVERS (10)
  • Show More...

• Mounting

  

  • BOX (16)
  • CEILING (1)
  • Lugs (1)
  • Screw-In (41)
  • VERTICAL (4)
  • Show More...

• Knockouts

  

  • 4 (1)
  • 5 (4)
  • 7 (5)
  • 8 (1)
  • 9 (7)
  • FALSE (48)
  • Show More...

• Type

  

  • 1-Gang Blank Box Cover (1)
  • 1-Gang Box Cover (4)
  • 1-Gang Cast Cover (3)
  • 1-Gang Operating Type Cast Cover (1)
  • 2 Screw Connector (1)
  • 2-Gang Blank Box Cover (1)
  • 2-Gang Box Cover (2)
  • 90 Deg Liquid Tight Conduit Connector (1)
  • 90 DEG Liquidtight Strain Relief Connector (1)
  • Blank Clip Cover With Screw (19)
  • Blank Cover With Screw (11)
  • BS-A Series Domed Top Design Cover (5)
  • Cast Cover (2)
  • Ceiling Plaster Ring, Mud Ring (3)
  • Clamp-On Entrance Cap (2)
  • Close Up Plugs (2)
  • Conduit Body (25)
  • Conduit Body Rigid Threaded (9)
  • CONDUIT CONNECTOR (1)
  • Duplex Receptacle Cover (1)
  • EY Series 25 PCT Fill Vertical And Horizontal Conduit Sealing Fitting (2)
  • EYD Series 25 PCT Fill Vertical Conduit Drain Sealing Fitting With Removable Nipple (1)
  • EYS Series 25 PCT Fill Vertical And Horizontal Sealing Fitting With Removable Nipple (6)
  • EYS Series 25 PCT Fill Vertical Conduit Sealing Fitting (3)
  • EYS Series 25 PCT Fill Vertical Sealing Fitting With Removable Nipple (1)
  • FD Deep Depth 1-Gang Cast Device Box (4)
  • FD Deep Depth 2-Gang Cast Device Box (1)
  • FDB Deep Depth 2-Gang Cast Device Box (1)
  • FDC Deep Depth 1-Gang Cast Device Box (4)
  • FDCT Deep Depth 1-Gang Cast Device Box (2)
  • FDT Deep Depth 1-Gang Cast Device Box (2)
  • FDX Deep Depth 1-Gang Cast Device Box (2)
  • Flat Square Cover (1)
  • Form-IN-Place Clip Cover With Integral Gasket (6)
  • FS Shallow Depth 1-Gang Cast Device Box (5)
  • FS Shallow Depth 2-Gang Cast Device Box (2)
  • FSC Shallow Depth 1-Gang Cast Device Box (5)
  • FSC Shallow Depth 2-Gang Cast Device Box (1)
  • FSS Shallow Depth 3-Gang Cast Device Box (1)
  • Gasket for use with FM7 conduit bodies. (1)
  • GRSS Outlet Box (1)
  • GRSSA Outlet Box (1)
  • Handy Box (4)
  • Handy Box Cover (6)
  • Handy Box Extension Ring (2)
  • Masonry Box (7)
  • Octagon Box Extension Ring (2)
  • Octagonal Box (10)
  • One Gang Weatherproof Cover (2)
  • One Gang Weatherproof Outlet Boxes (2)
  • OUTLET BOX (15)
  • Receptacle With Box Cover (1)
  • Recessed Head Close-Up Plug (7)
  • Round Cover (2)
  • Round Outlet Box (1)
  • Round Weather Proof Outlet Box (1)
  • Screw In Connector (2)
  • Sealing Gasket Assembly for Liquidtight Flexible Metal Conduit Connectors (2)
  • Service Entrance Ell (2)
  • SHC Ball Type Swivel Hanger Cover (1)
  • Square Box (15)
  • SQUARE BOX EXTENSION RING (3)
  • Square Corner Switch Box (9)
  • Square Cover, Plaster Ring, Mud Ring (14)
  • Square Cover. Plaster Ring, Mud Ring (7)
  • Square Head Close-Up Plug (6)
  • Square Raised Surface Cover (16)
  • Square Tile Cover, Plaster Ring, Mud Ring (5)
  • ST Series 45 DEG Liquidtight Connector With Plain Throat (3)
  • ST Series 90 DEG Liquidtight Connector With Plain Throat (13)
  • ST Series Straight Liquidtight Connector With Plain Throat (13)
  • STB Series Straight Liquidtight Connector With Insulated Throat (2)
  • STNM Series 90 DEG Liquidtight Connector (5)
  • STNM Series Straight Liquidtight Connector (6)
  • Straight Conduit Connector (1)
  • Straight Liquid Tight Conduit Connector (1)
  • Straight Liquidtight Strain Relief Connector (17)
  • Straight Squeeze Connector (2)
  • Two Gang Weatherproof Cover (2)
  • Two Gang Weatherproof Outlet Boxes (1)
  • Type 4Q Liquid Tight 45 DEG Connector (1)
  • Type 4Q Liquid Tight 90 DEG Connector (1)
  • Type 4Q Liquid Tight Straight Connector (1)
  • Type C Conduit Outlet Body (18)
  • Type C NEC 8X Conduit Outlet Body With Assembled Cover And Gasket (1)
  • Type LB Conduit Outlet Body (24)
  • Type LL Conduit Outlet Body (18)
  • Type LR Conduit Body (1)
  • Type LR Conduit Outlet Body (18)
  • Type SR Gold Seal Strain Relief Straight Connector (9)
  • Type T Conduit Outlet Body (21)
  • Type TB Conduit Outlet Body (13)
  • Type X Conduit Outlet Body (13)
  • UNF Union (3)
  • Universal Outlet Box (1)
  • Wire Mesh Strain Relief (2)
  • Show More...

• Size

  

  • 0.375 (4)
  • 0.5 (1)
  • 0.75 (4)
  • 1 (32)
  • 1.5 (1)
  • 1.625 Dia (1)
  • 1.8125 X 2.5 X 3.75 (1)
  • 1.8125 X 3.5 X 3.75 (1)
  • 1/2 (24)
  • 1/2-14 (1)
  • 1-1/2 (10)
  • 1-1/4 (7)
  • 1-11-1/2 (1)
  • 1-3/8 IN Opening (1)
  • 2 (8)
  • 2 X 1.5 X 3 (1)
  • 2 X 2 X 3 (1)
  • 2 X 2.5 X 3 (4)
  • 2 X 2.75 X 3 (1)
  • 2 X 3.5 X 3 (2)
  • 2.125 X 1.5 X 4 (1)
  • 2.125 X 1.875 X 4 (3)
  • 2.5 (1)
  • 2-1/2 (2)
  • 3 (5)
  • 3.625 X 3.5 X 3.75 (1)
  • 3/4 (30)
  • 3/4 IN Fixture Stem (1)
  • 3/4-14 (1)
  • 3/8 (2)
  • 3/8 IN (1/2 KO) (1)
  • 3/8 IN Flex, 1/2 IN Hub (3)
  • 4 (4)
  • 4 X 0.5 (1)
  • 4 X 2.125 (6)
  • 4 X 4 (4)
  • 4 X 4 X 0.25 (2)
  • 4 X 4 X 0.5 (17)
  • 4 X 4 X 0.625 (3)
  • 4 X 4 X 0.75 (2)
  • 4 X 4 X 1 (2)
  • 4 X 4 X 1.25 (3)
  • 4 X 4 X 1.5 (13)
  • 4 X 4 X 2 (2)
  • 4 X 4 X 2.125 (8)
  • 4.52 X 4.52 (1)
  • 4.53 X 4.53 (3)
  • 4.56 X 2.81 (2)
  • 4.6875 X 4.6875 (1)
  • 4.6875 X 4.6875 X 0.25 (1)
  • 4.6875 X 4.6875 X 0.5 (4)
  • 4.6875 X 4.6875 X 0.625 (2)
  • 4.6875 X 4.6875 X 1.25 (1)
  • 4.6875 X 4.6875 X 1.5 (1)
  • 4.6875 X 4.6875 X 2.125 (5)
  • 5.4375 X 2.5 X 3.75 (1)
  • 5.4375 X 3.5 X 3.75 (1)
  • 7.375 X 2.5 X 3.75 (1)
  • 7.375 X 3.5 X 3.75 (1)
  • Show More...

• Number Of Knockouts

  

  • 1 (3)
  • 10 (2)
  • 13 (4)
  • 14 (1)
  • 15 (1)
  • 16 (4)
  • 2 (1)
  • 22 (1)
  • 4 (2)
  • 5 (1)
  • 6 (1)
  • 7 (7)
  • 8 (4)
  • 9 (4)
  • Show More...

• Cable Entry

  

  • (1) 1 IN Hub (5)
  • (1) 1/2 IN Hub (2)
  • (1) 3/4 IN Hub (5)
  • (13) 3/4 IN Hub (1)
  • (2) 1 IN GRLB Hub (1)
  • (2) 1 IN Hub (4)
  • (2) 1/2 IN GRL Hub (1)
  • (2) 1/2 IN GRLB Hub (1)
  • (2) 1/2 IN Hub (1)
  • (2) 3/4 IN GRC Hub (1)
  • (2) 3/4 IN GRL Hub (1)
  • (2) 3/4 IN GRLB Hub (1)
  • (2) 3/4 IN Hub (6)
  • (3) 1 IN GRT Hub (1)
  • (3) 1 IN Hub (2)
  • (3) 1/2 IN GRT Hub (1)
  • (3) 1-1/2 IN GRT Hub (1)
  • (3) 2 IN GRT Hub (1)
  • (3) 3/4 IN GRC Hub (1)
  • (3) 3/4 IN GRT Hub (1)
  • (3) 3/4 IN Hub (2)
  • (4) 1 IN GRTX Hub (1)
  • (4) 1 IN Hub (1)
  • (4) 1/2 IN GRTX Hub (1)
  • (4) 3/4 IN GRTX Hub (1)
  • (4) 3/4 IN Hub (1)
  • (5) 3/4 IN GRJS Hub (1)
  • (7) 3/4 IN Hub (1)
  • Show More...