Filter Your Results

• Brands & Manufacturers
• Nsi Industries

---

• Product Type

  

  • #6 Bare Ring 1/2 Stud (1)
  • #8 Bare Ring #10 Stud (1)
  • #8 Bare Ring 1/4" Stud (1)
  • #8 Nylon Ring 3/8" Stud, 25 Per Pack (1)
  • .500" Poly Spiral Wrap (1)
  • 1 1/4" Comp. Conn. Ins. (1)
  • 1 1/4" Rigid Pull Elbow (1)
  • 1" Clamp Back, Alum (1)
  • 1" Emt Nail Strap (1)
  • 1" LB CVR/Gask RT Cond Bdy (1)
  • 1" RGD Pipe Strap Alum (1)
  • 1" Set Screw Comb. CPLG. (1)
  • 1" SS Conn. Ins. (1)
  • 1" SS Split Cuplg Steel (1)
  • 1/2" Emt Nail Strap (1)
  • 1/2" Screw-In CPLG. (1)
  • 1/2" Set Screw Comb. CPLG. (1)
  • 1/2" SS Conn. Ins. Zinc (1)
  • 1/2" Stem Lexan, On 1-5FC/Off 3-15FC, 6"Leads, 120V, 2000W T (1)
  • 1/2" Uf Conn. (1)
  • 1/2-1 Strapgrnd.Clamp Zinc (1)
  • 1-1/2" Angle Conn. Mall (1)
  • 1-1/2" Comp. Conn. Ins. Zinc (1)
  • 1-1/4" Roof Flashing (1)
  • 1-1/4" Sealing Locknut (1)
  • 120/208-277V SPDT 20A 24 Hour Duty Cycle (1)
  • 12-10 Nylon Female Disc. (1)
  • 12-10 Nylon Ring #10 Stud, 50 Per Pack, (1)
  • 12-10 Nylon Ring 3/8 Stud, 40 Perp Ack (1)
  • 12-10 Vinyl Lockspade 50 Pack # 6 Stud (2)
  • 12-10 Vinyl Ring #10 Stud, 50 Per Pack (1)
  • 12-10 Vinyl Ring 1/4" Stud, 50 Per Pack (1)
  • 12-10 Vinyl Ring 3/8" Stud, 40 Per Pack (1)
  • 12-10 Vinyl Ring 5/16STUD, 40 Per Pack (1)
  • 14”, BLK Steel Barb 50LB CBL Tie, 100PK (1)
  • 14”, Natrl STL Barb 50LB CBL Tie, 100PK (1)
  • 16-14 Nylon Spade #10STUD, 100 Per Pack (1)
  • 16-14 Vinyl Ring #10 Stud, 100 Per Pack (1)
  • 16-14 Vinyl Ring #8 Stud, 100 Per Pack (1)
  • 16-14 Vinyl Ring 1/4 Stud, 100 Per Pack (1)
  • 1X500-6 Line 1X500-6 Load (1)
  • 2" 90 Deg Conn. (1)
  • 2" Serv. Entr. LB (1)
  • 2-1/2" Squeeze Conn. (1)
  • 22-18 Vinyl Spade #8 Stud (1)
  • 22-18 Vinyl Spade 1/4 Stud, 100 Per Pack (1)
  • 3 1/2" Comp. Conn. (1)
  • 3 1/2" Comp. CPLG. (1)
  • 3 1/2" Pipe Strap (1)
  • 3" Angle Conn. (1)
  • 3" Non-Metallic Split Bush (1)
  • 3" Pipe Strap (1)
  • 3" Squeeze Conn. (1)
  • 3/0 Awg 1/2'' 1-Hole Aluminum Long Lug - Ruby (1)
  • 3/4 SS Conn. Ins. Zinc (1)
  • 3/4" Barrel Type NM-B Cable CO (1)
  • 3/4" LB CVR/Gask RT Cond Bdy (1)
  • 3/4" LLR CVR/Gask RT Cond Bdy (1)
  • 3/4" Rain Tight Extd Thread (1)
  • 3/4" Screw-In CPLG. (1)
  • 3/4" Set Screw Comb. CPLG. (1)
  • 3/4" SS Slip Culpg Steel (1)
  • 3/8 LQDT. Conn. (1)
  • 3/8 LQDT. Conn. 90 Deg (1)
  • 3/8" Conduit Locknut (1)
  • 3/8" Screw-In Conn. (1)
  • 3/8" Snap-In 90 Deg FMC Conn (1)
  • 3-1/2" Cond. Nipple Zinc (1)
  • 3-1/2" Serv. Entr. Cap Clamp (1)
  • 3-1/2" Set Screw Conn. Zinc (1)
  • 3-1/2" Set Screw CPLG. Zinc (1)
  • 4" LQDT. Conn. (1)
  • 4" Non-Metallic Split Bush (1)
  • 4" Pipe Strap (1)
  • 4" SQ Box, 1-1/2" Deep, Drawn (1)
  • 4" SQ Box, 2-1/8" DP, Welded 1 (1)
  • 4" SQ Flat Cover (1)
  • 4" Squeeze Conn. (1)
  • 4”, BLK Steel Barb 18LB CBL Tie, 100PK (1)
  • 4”, Natrl STL Barb 18LB CBL Tie, 100PK (1)
  • 5”, BLK Steel Barb 40LB CBL Tie, 100PK (1)
  • 5”, Natrl STL Barb 40LB CBL Tie, 100PK (1)
  • 7.5”, BLK Steel Barb 50LB CBL Tie, 100PK (1)
  • 7.5”, Natrl STL Barb 50LB CBL Tie, 100PK (1)
  • 90° Connector (17)
  • 90°Connector (17)
  • AC/MC Single Screw Strap Type Connector (5)
  • Al Wide Range Connector #1-8 Awg (1)
  • Aluminum Split Bolt 1/0 (1)
  • Aluminum Split Bolt 2/0 (1)
  • Aluminum Split Bolt 250 (1)
  • Aluminum Split Bolt 350 (1)
  • Box Extender (2)
  • Box Support (1)
  • Butt Splice Connector (2)
  • Clamp (9)
  • Clamp-On Entrance Cap (9)
  • Combination Coupling (4)
  • Compression Connector (11)
  • Compression Coupling (2)
  • Compression Lug (5)
  • Compression Splice Connector (3)
  • Compression Split Bolt Connector (2)
  • Conduit Chased Nipple (9)
  • Conduit Coupling (1)
  • Conduit Hanger (14)
  • Conduit Hanger With Bolt (14)
  • Conduit Hub Swing 1/2" (1)
  • Conduit Mount (4)
  • Connector (14)
  • Copper Compression Lug (5)
  • Cord Grip Alum 1/2 NPT .125 - .188 (1)
  • Cord Grip Alum 90 1/2 .375 - .438 (1)
  • Cord Grip Connector (6)
  • Cord Grip Festoon 2 1.46 X .45 (1)
  • Cordset Mini-Link A PVC Female 3P 12FT (1)
  • Coupling (5)
  • Crimp Tool (1)
  • Delayed Response Utility (1)
  • Die Cast Zinc Photocontrol (1)
  • Double Sided Entry Insulated Multi-Tap Connector (3)
  • Double Snap Cable Connector (1)
  • Duct Tape (1)
  • Easy Splice Alcu Butt Splice 1/0 (1)
  • Easy Twist Crimp Sleeve Steel 14-8 (1)
  • Easy-Splice Roll On (2)
  • Easy-Stack Cable Stacker - 25 Pack (2)
  • Electrical Tape (2)
  • Emt Compression Connector (23)
  • Emt Compression Coupling (23)
  • EMT Concrete Tight Connector (5)
  • EMT Concrete Tight DC Connector (9)
  • Emt Insulating Bushing (10)
  • Emt Set Screw Connector (6)
  • Emt Set Screw Coupling (15)
  • EMT SS Diecast Connector (9)
  • EMT/FMC Combination Coupling (2)
  • Flat Washer (1)
  • Flexible Connector (5)
  • Flush Mount (3)
  • Ground Bar Cu 10 Circuit 2-14 (1)
  • Ground Clamp (13)
  • Ground Clamp Alum 1/2-1" (1)
  • Ground Clamp Alum 2 1/2-4" (1)
  • Ground Clamp HD 1/2-1" DB Rated (1)
  • Ground Connector (2)
  • Ground Rod Clamp (4)
  • Ground Rod Connector HD 1" (1)
  • Hanger (2)
  • Hex Nut (1)
  • Insulated Butt Splice (4)
  • Insulated Grounding Bushing (10)
  • Insulating Bushing (8)
  • Insulation Piercing Connector 500-4/0 Aw (1)
  • Insulation-Tap Connector (9)
  • Intersystem Bonding Connector (2)
  • Interval Timer 18 HR White (1)
  • Interval Timer 18 HR White Flash (1)
  • Interval Timer 30 Min Ivory (1)
  • Large Power Distribution Cover (1)
  • Lay-In Connector (2)
  • Lexan Swivel Photocontrol (1)
  • Liquid Tight Straight Connector (8)
  • Lock Washer (1)
  • Locknut (13)
  • MC Conn Al 1/2 .525 - .650 (1)
  • Mechanical Connector (15)
  • Medium Power Distribution Cover (1)
  • Metal Enclosure (1)
  • Multi-Port Connector (3)
  • Multi-Tap Connector (14)
  • Nail Type Strap (1)
  • No-1 Anti-Short Bushing (1)
  • No-3 Anti-Short Bushing (1)
  • Offset Nipple (6)
  • One Hole Strap (7)
  • Panelboard Lug (2)
  • Pipe Strap (16)
  • Pir Ceiling Oc Sensor 1000W 120/277V (1)
  • Plastic Bushing (10)
  • Plug (6)
  • Polaris Ins 2 Port 750 (1)
  • Polaris Ins Multi-Tap 250 4 Port Dse (1)
  • Polaris Ins Multi-Tap 350 5 Port Dse (1)
  • Polaris Ins Multi-Tap 350 6 Port Dse (1)
  • Polaris Ins Multi-Tap 350 8 Port Dse (1)
  • Polaris Ins Multi-Tap 500 8 Port Dse (1)
  • Polaris Ins Splice 350 (1)
  • Polaris Mount Ins Multi-Tap 250 3 Port (1)
  • Polaris Mount Ins Multi-Tap 350 12 Port (1)
  • Polaris Mount Ins Multi-Tap 350 3 Port (1)
  • Polaris Mount Ins Multi-Tap 500 6 Port (1)
  • Power Distribution Block (15)
  • Powergrp Cable Tie Natural 24" 175LB (50PK) (2)
  • Pull Chain SP3T Off-On-On-On (1)
  • Pull Elbow (3)
  • Pushbutton Momentary SPST N.O. (1)
  • Push-In Connector (3)
  • PWR Dist 1X2-14 Line 1X2-14 Load (1)
  • PWR Dist 2X 2/0-14 Line 6X4-14 Load (1)
  • Raintight Compression Coupling (5)
  • Raintight Connector (6)
  • RCPT Mini A Size Male 3P 1FT (1)
  • Receptacle With Plastic Housing and Bracket (1)
  • Reducing Bushing (15)
  • Reducing Washer (22)
  • Replacement Motor 120V, 60HZ (1)
  • Replacement Motor 208-277V, 60HZ (1)
  • RJ45 Boot 60 MM Max Od Blu (1)
  • Romex Connector (4)
  • Roof Flashing (3)
  • Rubber Cover For Toggle (1)
  • Screw-On Liquid Tight Connector (1)
  • Service Entrance Fitting (5)
  • Service Entrance Kit (1)
  • Service Post Connector (3)
  • Set Screw Connector (1)
  • Set Screw EMT Connector (6)
  • Signaling Transformer (1)
  • Single Sided Entry Insulated Multi-Tap Connector (3)
  • Small Power Distribution Block Cover (1)
  • Splice (3)
  • Splice Kit (2)
  • Splicer Reducer (3)
  • Split Bolt Connector (7)
  • Squeeze Connector (16)
  • Step Panel Lug (4) 600-2 (1)
  • Strap (3)
  • Strap Connector (14)
  • Submersible Connector (2)
  • Supercap (2)
  • Switch Box Support (1)
  • Swivel Fixture Hanger (1)
  • Terminal Lug (3)
  • Time Switch (11)
  • Timer (4)
  • Timer Swtch (2)
  • Toggle Switch Bat DPDT On-Off-On Screw (1)
  • Toggle Switch Bat DPST On-Off 20 Amp (1)
  • Transformer (1)
  • Transformer 595-1006 (1)
  • Tripper (1)
  • Turnlock Shorting Cap 480V Max (1)
  • Twist Timer (4)
  • Twist-On Wire Connector (7)
  • Two Hole Strap (6)
  • Weatherproof Outlet Cover Durable Resistance Shell (2)
  • Wedge Clamp (1)
  • Winged Wire Connector (10)
  • Wire Holder (2)
  • Show More...

• Brand

  

  • 98010027731 (2)
  • Blueline (1)
  • Bridgeport (574)
  • Bridgeport Fittings (266)
  • Connector Bloks(TM) (20)
  • Easy-Twist (2)
  • Metallics (1)
  • NSi (456)
  • Nsi Industries (215)
  • Photocontrols (1)
  • Platinum Tools (30)
  • PLATINUM TOOLS INC (2)
  • Polaris (48)
  • Powergrp (24)
  • PROGRESS (1)
  • Remke (3)
  • Remke Industries (32)
  • Remke Industries Inc. (1)
  • TORK (10)
  • Tork(R) (28)
  • Show More...

• Trade Size

  

  • #1 (1)
  • 0 (1)
  • 0.375 (1)
  • 0.5 (24)
  • 0.75 (27)
  • 1 (69)
  • 1 in (11)
  • 1 to 1/2 in (2)
  • 1 to 3/4 in (2)
  • 1.25 (24)
  • 1.25 in (5)
  • 1.5 (29)
  • 1/2 (23)
  • 1/2 in (39)
  • 1/2 to 3/8 in (1)
  • -1/4 - 1/2 (1)
  • 1-1/2 (34)
  • 1-1/2 - 1/2 (1)
  • 1-1/2 in (9)
  • 1-1/2 to 1 in (2)
  • 1-1/2 to 1/2 in (1)
  • 1-1/2 to 1-1/4 in (2)
  • 1-1/2 to 3/4 in (2)
  • 1-1/4 (30)
  • 1-1/4 in (10)
  • 1-1/4 to 1 in (2)
  • 1-1/4 to 1/2 in (1)
  • 1-1/4 to 3/4 in (2)
  • 2 (37)
  • 2 in (37)
  • 2 to 1 in (2)
  • 2 to 1/2 in (1)
  • 2 to 1-1/2 in (2)
  • 2 to 1-1/4 in (2)
  • 2 to 3/4 in (2)
  • 2 to 4 in (1)
  • 2.5 (22)
  • 2.5 in (1)
  • 2-1/2 (10)
  • 2-1/2 IN (13)
  • 2-1/2 to 1-1/2 in (1)
  • 2-1/2 to 1-1/4 in (1)
  • 2-1/2 to 2 in (2)
  • 3 (42)
  • 3 1/2 (2)
  • 3 1/2 - 3 (1)
  • 3 in (3)
  • 3 to 2 in (1)
  • 3 to 2-1/2 in (2)
  • 3 to 4 in (1)
  • 3.5 (11)
  • 3/4 (25)
  • 3/4 in (40)
  • 3/4 to 1/2 in (2)
  • 3/4 to 3/4 in (1)
  • 3/4-1/2 (1)
  • 3/8 (13)
  • 3/8 in (13)
  • 3-1/2 (13)
  • 3-1/2 in (6)
  • 4 (35)
  • 4 - 3-1/2 (1)
  • 4 in (4)
  • 5 (2)
  • 5 in (1)
  • 6 (1)
  • 6 in (1)
  • 9 in (1)
  • Show More...

• Material

  

  • 1 (1)
  • 304 Grade Stainless Steel (2)
  • 6061-T6 Aluminum Body - Valox Nylon 6/6 Base - Lexan 500R Polycarbonate Panels and Covers (2)
  • ABS (2)
  • Aluminum (161)
  • Aluminum - Tin Plated Copper Pin (3)
  • ALUMINUM ALLOY (1)
  • Aluminum Alloy-Tin Plated (4)
  • Aluminum body -Glass Filled Polyester Base (5)
  • Aluminum, Glass Filled Polyester Base (1)
  • Aluminum/Copper (Conductor);Glass Filled Polyester (Housing) (15)
  • Aluminum/Stainless Steel (3)
  • Brass (1)
  • Brass (Body);Stainless Steel (Conductor) (1)
  • Brass and Nickel Plated (1)
  • Brass, Nickel (1)
  • Bronze (1)
  • Cast Bronze (1)
  • Cast Zinc (4)
  • Clear Acrylic (3)
  • Copper (125)
  • Copper, Nylon (2)
  • Copper, PVC (1)
  • Copper/PVC (1)
  • Die Cast Zinc (12)
  • Die-Cast Zinc (65)
  • Die-Cast Zinc Spring Steel;Plastic (Bush) (1)
  • EPDM RUBBER (1)
  • Fiber Reinforced Thermal Plastic (3)
  • Galvanized Steel (2)
  • Glass Filled Polyester (1)
  • HEAT SHRINK (1)
  • High Carbon Tool Steel (1)
  • High Copper Alloy Body;Silicon Bronze (Nut;Lockwasher) (2)
  • High Strength Plated Aluminum Alloy (1)
  • LEXAN (1)
  • Malleable Iron (48)
  • Malleable Iron (Clamps);Steel (Bolt and Nut) (1)
  • Malleable Iron Clamp, Steel U-Bolt and Nuts (1)
  • Malleable Iron Clamps, Steel Bolt and Nut (2)
  • Metal (5)
  • Metal Brushed Aluminum (3)
  • Neoprene (2)
  • Non-Combustible (1)
  • Noryl (1)
  • Nylon (9)
  • Nylon 66 (2)
  • Nylon 6-6 (3)
  • Nylon Insulation (15)
  • Nylon Plastic (7)
  • Plastic (55)
  • Plastic (Enclosure) (1)
  • Plastic/Zinc (1)
  • Plastic;Metal (Box) (1)
  • Plastisol (1)
  • Poly coated Cloth, Rubber adhesive (1)
  • Polycarbonate (7)
  • Polyethylene (1)
  • Polypropylene (4)
  • Porcelain (2)
  • PVC (3)
  • Silicon Bronze (5)
  • Silicon Bronze (Body) (4)
  • Silicon Bronze (Body);Stainless Steel (Screw) (4)
  • Silicon Bronze (Body);Zinc Plated Steel (Screw) (4)
  • Silicon Bronze (Body;Screw) (2)
  • Silicone Bronze (1)
  • SILICONE RUBBER (1)
  • Stainless Steel (7)
  • Steel (192)
  • Steel (Cover);Malleable Iron (Ball) (1)
  • Steel (Die Head) (1)
  • Steel Cover with Malleable Iron Ball (1)
  • Steel;Polyethylene (Seal) (1)
  • Thermoplastic (29)
  • TIN PLATED COPPER (11)
  • UV Polyethylene (2)
  • Vinyl (36)
  • Vinyl Impregnatted Cloth (2)
  • Vinyl Insulation (36)
  • Zinc Alloy (11)
  • Zinc Cast (14)
  • Zinc Die Cast (129)
  • Zinc Die Cast Body with Steel Saddle Clamps and Insulated Throat (1)
  • Zinc Die Cast with Spring Steel Inner Locking Ring (2)
  • Zinc Die Cast, Tin Plated Aluminum (1)
  • ZINC PLATED STEEL (10)
  • Show More...

• Finish

  

  • Acrylic (3)
  • Aluminum (28)
  • As Cast (2)
  • Ball burnish (171)
  • Ball Burnished (3)
  • Ball Burnished;Mirror Smooth (67)
  • Ball Burnished;Mirror Smooth;Zinc Electro-Plate (Strap) (3)
  • Black Oxide (1)
  • CHROME (1)
  • COPPER (28)
  • Enamel (33)
  • Enamel paint (5)
  • EPDM Rubber Insulated (8)
  • Galvanized (4)
  • Green (1)
  • Green Colored (1)
  • Hot Dip Galvanized (1)
  • Hot-Dip Galvanize (3)
  • Natural (26)
  • Nickel (1)
  • NO FINISH (59)
  • NYLON (2)
  • Plain (12)
  • Plastisol (2)
  • Plastisol Insulated (82)
  • Polycarbonate (3)
  • Polypropylene (2)
  • Powder Coat (1)
  • Steel (2)
  • Thermal Plastic (3)
  • Thermoplastic (33)
  • Tin Plated (120)
  • Tin Plated Bronze (19)
  • Tin Plated Copper (9)
  • Tin-Plated (1)
  • Zinc Coated (1)
  • Zinc Electro Plated (1)
  • Zinc electro-plate (1)
  • Zinc Electroplated (252)
  • Zinc Electro-Plated (22)
  • Zinc Plated (6)
  • Show More...

• Sub Brand

  

  • 3M(TM);Scotch(R) (1)
  • Aluminum Compression (2)
  • Bridgeport (12)
  • Easy Twist (2)
  • Easy Wrap(TM) (3)
  • Easy-Splice(TM) (5)
  • Easy-Twist(TM) (21)
  • Fullman (4)
  • Grounding (2)
  • Mechanical Connector (3)
  • Mighty-Hold(TM) (1)
  • Miniterms (1)
  • NSI (41)
  • Photocontrols (2)
  • Polaris Black (19)
  • Polaris Edge (2)
  • Polaris Gray (6)
  • POLARIS(TM) (11)
  • Split Bolts (10)
  • Show More...

• Model

  

  • ISW (2)
  • MWH-1 (1)
  • Push Button (2)
  • RWH-1 (1)
  • Show More...

• Size

  

  • .375 Flush Mount (2)
  • .500 Conduit Mount (5)
  • 0 (3)
  • 1 (65)
  • 1 - 1/2 (2)
  • 1 - 3/4 (2)
  • 1 1/2 (24)
  • 1 1/4 (25)
  • 1/2 (68)
  • 1/2 - 1 (1)
  • 1/2 in (8)
  • 1-1/2 (26)
  • 1-1/2 - 1 (2)
  • 1-1/2 - 1/2 (2)
  • 1-1/2 - 1-1/4 (2)
  • 1-1/2 - 3/4 (2)
  • 1-1/2 DEEP (1)
  • 1-1/4 (24)
  • 1-1/4 - 1 (2)
  • 1-1/4 - 1/2 (2)
  • 1-1/4 - 3/4 (2)
  • 14/2 AWG;12/2 AWG (1)
  • 14/3 AWG;12/3 AWG (1)
  • 2 (56)
  • 2 - 1 (2)
  • 2 - 1 1/2 (1)
  • 2 - 1 1/4 (1)
  • 2 - 1/2 (2)
  • 2 - 1-1/2 (1)
  • 2 1/2 (17)
  • 2 1/2 - 1 (1)
  • 2 1/2 - 1 1/2 (1)
  • 2 1/2 - 1 1/4 (1)
  • 2 1/2 - 1/2 (1)
  • 2 1/2 - 2 (1)
  • 2 1/2 - 3/4 (1)
  • 2 -3/4 (1)
  • 2-1/2 (19)
  • 2-1/8 DEEP (1)
  • 3 (39)
  • 3 - 2 (1)
  • 3 - 2 1/2 (1)
  • 3 1/2 (11)
  • 3 1/2 - 2 (1)
  • 3 1/2 - 2 1/2 (1)
  • 3 1/2 - 3 (1)
  • 3 x 5 in (9)
  • 3/4 (82)
  • 3/4 - 1/2 (2)
  • 3/4 in (5)
  • 3/8 (32)
  • 3/8 in (3)
  • 3/8 lag screw approx.1" by 15/16 (1)
  • 3/8" (2)
  • 3-1/2 (16)
  • 4 (36)
  • 4 - 2 (1)
  • 4 - 2 1/2 (1)
  • 4 - 3 1/2 (1)
  • 4.687 x 2.937 x 7.937 in (1)
  • 4-11/16 x 2-15/16 x 7-15/16 in (3)
  • 4-4 AWG (1)
  • 5 (6)
  • 5.062 x 3.062 x 8.312 in (4)
  • 5/8 & 1/2 Ground Rod or #3 & #4 Reinforcing Bars (1)
  • 5-1/16 x 3-1/16 x 8-5/16 in (4)
  • 6 (2)
  • 7 (1)
  • 9 (1)
  • For RG6-U Cable (1)
  • Four Compartment Compact Pail (1)
  • H=.950 - W=.812 (1)
  • H=.969 - W=.551 - ID=.236 (1)
  • H=1.01 - W=.717 - ID=.252 (2)
  • H=1.13 - W=.795 - ID=.327 (1)
  • H=1.14 - W=.720 - ID=.283 (1)
  • H=1.205 - W=.730 (1)
  • H=1.25 - W=.906 - ID=.354 (2)
  • H=1.472 - W=.751 (1)
  • H=2.187 - W=3.187 (5)
  • H=5.00 - W=3.00 (8)
  • H=6.00 - W=3.25 (2)
  • L= 1.350 - W=.748 (1)
  • L=.854 - W=.472 (1)
  • L=.866 - W=.492 (1)
  • L=.880 - W=5.05 - H=2.10 (1)
  • L=.900 - OD=.270 - ID=.170 (1)
  • L=1.00 - OD=.340 - ID=.250 (1)
  • L=1.07 - H=.750 - W=.380 (1)
  • L=1.09 - OD=.598 - ID=.236 - Pin Dia=.240 (1)
  • L=1.10 - W=.673 - OD=.469 - ID.358 (1)
  • L=1.120 - W=1.180 - H=1.380 (2)
  • L=1.125 - H=1.250 - W=.742 (1)
  • L=1.130 - W=1.240 - H=1.370 (1)
  • L=1.153 - W=.748 (3)
  • L=1.20 - W=.420 - OD=.270 - ID=.170 (2)
  • L=1.25 - OD=.420 - ID=.310 (1)
  • L=1.25 - W=8.83 - H=3.38 (1)
  • L=1.417 - W=.787 (2)
  • L=1.50 - W=.420 - OD=.300 - ID=.200 (2)
  • L=1.50 - W=.490 - OD=.340 - ID=.250 (1)
  • L=1.50 - W=.560 - OD=.340 - ID=.250 (1)
  • L=1.52 - W=.420 - OD=.295 - ID=.205 (2)
  • L=1.550 - W=1.188 - H=1.375 (2)
  • L=1.550 - W=1.240 - H=1.370 (2)
  • L=1.574 - W=.866 (2)
  • L=1.60 - OD=.520 - ID=.390 (1)
  • L=1.600 - W=1.550 - H=1.750 (1)
  • L=1.620 - W=1.620 - H=1.750 (2)
  • L=1.75 - OD=.560 - ID=.440 (1)
  • L=1.75 - OD=.620 - ID=.490 (1)
  • L=1.80 - OD=.470 - ID=.360 (1)
  • L=1.80 - W=.600 - OD=.420 - ID=.310 (2)
  • L=1.83 - W=.670 - OD=.470 - ID=.360 (1)
  • L=1.83 - W=.739 - OD=.519 - ID=.389 (1)
  • L=1.840 - W=1.870 - H=1.870 (3)
  • L=1.840 - WW=1.750 - H=1.870 (2)
  • L=1.85 - OD=.598 - ID=.299 - Pin Dia=.240 (1)
  • L=1.850 - W=1.600 - H=1.810 (1)
  • L=1.90 - OD=.690 - ID=.550 (1)
  • L=1.91 - W=.591 - OD=.340 - ID=.250 (1)
  • L=1.920 - W=.750 (1)
  • L=1.920 - W=.880 (1)
  • L=1.93 - W=2.65 - H=2.10 (1)
  • L=1.980 - W=1.240 - H=1.370 (2)
  • L=14.400 - W=2.830 - H=2.910 (1)
  • L=14.570 - W=2.410 - H=2.770 (1)
  • L=2.00 - OD=.598 - ID=.370 - Pin Dia=.290 (1)
  • L=2.007 - W=1.102 (2)
  • L=2.07 - W=.602 - OD=.421 - ID=.315 (3)
  • L=2.10 - OD=.810 - ID=.660 (1)
  • L=2.106 - W=1.102 (2)
  • L=2.15 - W=.550 - OD=.380 - ID=.270 (2)
  • L=2.20 - OD=.469 - ID=.359 (1)
  • L=2.20 - OD=.519 - ID=.389 (1)
  • L=2.20 - OD=.850 - ID=.429 - Pin Dia=.330 (1)
  • L=2.20 - W=1.80 - H=3.10 (2)
  • L=2.24 - W=.810 - OD=.560 - ID=.440 (1)
  • L=2.240 - W=1.500 - H=1.688 (2)
  • L=2.250 - W=1.600 - H=1.750 (1)
  • L=2.35 - W=.550 - OD=.380 - ID=.270 (1)
  • L=2.36 - W=.420 - OD=.300 - ID=.200 (2)
  • L=2.36 - W=.490 - OD=.340 - ID=.250 (1)
  • L=2.36 - W=.900 - OD=.620 - ID=.490 (1)
  • L=2.36 - W=1.00 - OD=.690 - ID=.550 (1)
  • L=2.37 - OD=.527 - ID=.307 (1)
  • L=2.390 - W=1.188 - H=1.375 (1)
  • L=2.440 - W=1.220 (2)
  • L=2.470 - W=2.500 - H=2.440 (2)
  • L=2.48 - W=1.09 - OD=.750 - ID=.590 (1)
  • L=2.50 - OD=.629 - ID=.389 (1)
  • L=2.50 - OD=1.06 - ID=.830 (1)
  • L=2.50 - W=.744 - OD=.520 - ID=.390 (3)
  • L=2.540 - W=1.130 (1)
  • L=2.59 - OD=.850 - ID=.535 - Pin Dia=.420 (1)
  • L=2.61 - W=1.28 - OD=.870 - ID=.700 (1)
  • L=2.62 - OD=.689 - ID=.440 (1)
  • L=2.630 - W=1.600 - H=1.800 (1)
  • L=2.630 - W=1.830 - H=1.790 (2)
  • L=2.67 - W=.815 - OD=.563 - ID=.441 (2)
  • L=2.79 - W=.902 - OD=.622 - ID=.492 (2)
  • L=2.79 - W=1.00 - OD=.689 - ID=.547 (2)
  • L=2.79 - W=2.65 - H=2.10 (1)
  • L=2.79 - W=4.18 - H=2.10 (1)
  • L=2.814 - W=1.338 (2)
  • L=2.90 - H=2.34 - W=1.04 (5)
  • L=2.930 - W=2.280 - H=2.180 (2)
  • L=3.03 - W=1.09 - OD=.752 - ID=.594 (1)
  • L=3.07 - W=.600 - OD=.420 - ID=.310 (1)
  • L=3.12 - OD=.838 - ID=.550 (1)
  • L=3.240 - W=1.500 (1)
  • L=3.250 - W=.900 - H=1.480 (2)
  • L=3.28 - W=1.54 - OD=1.06 - ID=.830 (1)
  • L=3.410 - W=1.830 - H=1.790 (1)
  • L=3.46 - W=1.27 - OD=.874 - ID=.701 (1)
  • L=3.480 - W=3.500 - H=3.500 (1)
  • L=3.480 - W=4.500 - H=3.500 (1)
  • L=3.520 - W=2.410 - H=2.610 (1)
  • L=3.560 - W=1.020 - H=2.570 (1)
  • L=3.610 - W=4.190 - H=3.060 (1)
  • L=3.65 - W=2.65 - H=2.10 (1)
  • L=3.800 - W=2.030 - H=2.180 (1)
  • L=3.800 - W=2.280 - H=2.180 (1)
  • L=3.90 - W=3.00 - H=4.50 (1)
  • L=30 FT - W=1.00 IN (1)
  • L=4.00 - H=2.62 - W=1.71 (8)
  • L=4.000 - W=1.190 - H=1.900 (2)
  • L=4.010 - W=2.830 - H=2.910 (1)
  • L=4.13 - W=1.53 - OD=1.06 - ID=.835 (2)
  • L=4.190 - W=1.830 - H=1.790 (1)
  • L=4.2 - W=5.1 - H=7.2 (1)
  • L=4.25 - OD=1.06 - ID=.830 (1)
  • L=4.25 - W=.810 - OD=.420 - ID=.310 (1)
  • L=4.29 - W=.750 - OD=.470 - ID=.360 (1)
  • L=4.420 - W=2.280 - H=2.370 (1)
  • L=4.470 - W=1.320 - H=2.200 (1)
  • L=4.570 - W=2.410 - H=2.610 (1)
  • L=4.61 - W=.810 - OD=.560 - ID=.440 (1)
  • L=4.620 - W=1.620 - H=3.000 (1)
  • L=4.626 - W=.795 - H=.670 (1)
  • L=4.65 - W=.900 - OD=.620 - ID=.490 (1)
  • L=4.660 - W=2.280 - H=2.180 (1)
  • L=4.74 - W=.84 - OD=.63 - ID=.39 (1)
  • L=4.79 - W=.937 - OD=.690 - ID=.440 (1)
  • L=4.800 - W=4.190 - H=3.060 (1)
  • L=4.812 - H=4.812 - W=3.312 (1)
  • L=4.950 - W=3.410 - H=3.420 (1)
  • L=4.96 - W=1.09 - OD=.750 - ID=.590 (1)
  • L=5.00 - W=1.02 - OD=.759 - ID=.479 (1)
  • L=5.062 - H-8.312 - W=3.062 (2)
  • L=5.120 - W=2.410 - H=2.770 (1)
  • L=5.15 - W=1.90 - OD=1.31 - ID=1.03 (1)
  • L=5.24 - W=1.14 - OD=.840 - ID=.550 (1)
  • L=5.240 - W=2.830 - H=2.910 (1)
  • L=5.30 - W=1.25 - OD=.920 - ID=.590 (1)
  • L=5.31 - W=1.19 - OD=.815 - ID=.657 (1)
  • L=5.39 - W=1.28 - OD=.870 - ID=.700 (1)
  • L=5.47 - W=1.39 - OD=.950 - ID=.760 (1)
  • L=5.50 - H=3.25 - W=2.90 (5)
  • L=5.520 - W=2.280 - H=2.180 (1)
  • L=5.620 - W=2.410 - H=2.610 (1)
  • L=5.75 - W=1.54 - OD=1.06 - ID=.840 (1)
  • L=5.79 - W=1.72 - OD=1.19 - ID=.930 (1)
  • L=5.800 - W=2.750 - H=3.750 (1)
  • L=5.87 - W=1.51 - OD=1.12 - ID=.720 (1)
  • L=6.30 - W=1.90 - OD=1.31 - ID=1.04 (1)
  • L=6.380 - W=2.830 - H=2.910 (1)
  • L=6.380 - W=3.410 - H=3.420 (1)
  • L=6.42 - W=1.60 - OD=1.19 - ID=.759 (1)
  • L=6.50 - W=1.78 - OD=1.32 - ID=.840 (1)
  • L=6.670 - W=2.410 - H=2.610 (1)
  • L=7.180 - W=4.190 - H=3.060 (1)
  • L=7.240 - W=2.280 - H=2.180 (1)
  • L=7.250 - W=1.750 - H=3.250 (1)
  • L=7.520 - W=2.830 - H=2.910 (1)
  • L=7.75 - W=1.93 - H=.687 (1)
  • L=8.770 - W=2.410 - H=2.610 (1)
  • L=8.940 - W=2.810 - H=3.030 (1)
  • L=9.230 - W=3.410 - H=3.420 (1)
  • L=9.820 - W=2.830 - H=2.910 (1)
  • Large Cover (1)
  • Medium Cover (1)
  • Small Cover (1)
  • Stud=1/2 x 13-1 1/4 - Hex Nut=3/4 x 16 (2)
  • Stud=1/2 x 13-1 1/4 - Hex Nut=7/8 x 14 (2)
  • Stud=3/8 x 16-1 1/8 - Hex Nut=5/8 x 18 (2)
  • Stud=5/8 x 11-1 1/2 - Hex Nut=1 1/8 (2)
  • Thickness - 7mil - Length-60' - Width 3/4" (20)
  • Thickness - 7mil - Length-66' - Width 3/4" (10)
  • Thickness=.030 - Width=.75 - Length=22 feet (3)
  • Show More...

• Minimum Conductor Size

  

  • #1/0 AWG (Range of Equal Main and Tap-Solid) (1)
  • #10 AWG (2)
  • #10 AWG (Range of Equal Main and Tap-Solid) (1)
  • #10 AWG (Stranded and Solid) (1)
  • #12 AWG (1)
  • #14 AWG (17)
  • #14 AWG (Stranded) (2)
  • #16 AWG (Range of Equal Main and Tap-Stranded) (2)
  • #2 AWG (2)
  • #2 AWG (Range of Equal Main and Tap-Solid) (1)
  • #22 AWG (3)
  • #22 AWG;#18 AWG (1)
  • #4 AWG (11)
  • #4 AWG (Stranded) (1)
  • #6 AWG (28)
  • #6 AWG (Range of Equal Main and Tap-Solid) (1)
  • #6 AWG (Stranded) (2)
  • #8 AWG (5)
  • #8 AWG (Range of Equal Main and Tap-Solid) (1)
  • #8 AWG (Solid) (1)
  • (1) #18 AWG;(1) #20 AWG (2)
  • (2) #10 AWG;(1) #12 AWG (1)
  • (2) #14 AWG (1)
  • (2) #18 AWG (2)
  • (2) #22 AWG (2)
  • (3) #16 AWG (4)
  • (3) #18 AWG (2)
  • (3) #20 AWG (1)
  • (3) #22 AWG (2)
  • 250 MCM (6)
  • 4/0 AWG (1)
  • Show More...

• Length

  

  • 0.5 in (1)
  • 0.558 in (1)
  • 0.625 (1)
  • 0.743 in (1)
  • 0.75 (1)
  • 0.945 in (1)
  • 0.99 (1)
  • 1 (1)
  • 1 in (8)
  • 1.062 (2)
  • 1.125 (1)
  • 1.13 in (1)
  • 1.1875 in (1)
  • 1.240 in (1)
  • 1.25 in (2)
  • 1.34 in (1)
  • 1.375 (1)
  • 1.38 in (2)
  • 1.41 in (1)
  • 1.44 in (1)
  • 1.440 in (1)
  • 1.445 in (1)
  • 1.5 (1)
  • 1.5 in (2)
  • 1.50 in (1)
  • 1.5045 in (1)
  • 1.525 in (1)
  • 1.541 (1)
  • 1.56 in (1)
  • 1.604 (1)
  • 1.62 in (1)
  • 1.625 (1)
  • 1.63 in (2)
  • 1.75 in (1)
  • 1.850 in (1)
  • 1.870 in (2)
  • 1.88 in (2)
  • 1.982 in (1)
  • 1/2 in (2)
  • 100 (6)
  • 11.000000000000000 (2)
  • 11.75 (1)
  • 11/16 in (1)
  • 1-1/16 in (4)
  • 1-1/2 in (6)
  • 1-1/4 (1)
  • 1-1/4 in (2)
  • 1-1/8 in (7)
  • 1-11/16 in (2)
  • 1-13/16 in (1)
  • 1-15/16 in (3)
  • 1-27/32 in (4)
  • 13/16 in (2)
  • 1-3/16 in (2)
  • 1-3/4 in (8)
  • 1-3/8 in (2)
  • 1-3/8 in (Strap Center point Length) (2)
  • 14 (1)
  • 144 (1)
  • 15.000000000000000 (1)
  • 15/16 in (4)
  • 1-5/16 in (8)
  • 1-5/8 in (6)
  • 1-7/16 in (1)
  • 1-7/8 in (3)
  • 1-9/16 in (4)
  • 2 in (14)
  • 2.06 in (2)
  • 2.12 in (1)
  • 2.13 in (2)
  • 2.240 in (1)
  • 2.25 in (1)
  • 2.31 in (2)
  • 2.362 (1)
  • 2.390 in (1)
  • 2.405 in (1)
  • 2.5 in (2)
  • 2.56 in (2)
  • 2.725 in (1)
  • 2.75 (1)
  • 2.75 in (1)
  • 2.750 in (1)
  • 2.83 in (1)
  • 2.843 in (1)
  • 2.88 in (1)
  • 2.90 in (1)
  • 2.93 in (1)
  • 20.5 (1)
  • 2-1/16 in (1)
  • 2-1/2 in (7)
  • 2-1/4 in (6)
  • 2-1/8 in (2)
  • 2-11/16 in (5)
  • 2-11/32 in (2)
  • 2-13/32 in (1)
  • 2-15/16 in (3)
  • 2-3/16 in (1)
  • 2-3/4 in (2)
  • 2-3/8 in (1)
  • 2-5/16 in (2)
  • 2-5/8 in (3)
  • 2-7/16 in (2)
  • 2-7/8 in (3)
  • 2-9/16 in (2)
  • 3 in (2)
  • 3.063 in (2)
  • 3.13 in (1)
  • 3.25 in (1)
  • 3.250 in (1)
  • 3.340 in (1)
  • 3.35 in (1)
  • 3.44 in (1)
  • 3.5 in (1)
  • 3.62 in (1)
  • 3.69 in (1)
  • 3.75 (1)
  • 3.75 in (2)
  • 3.765 in (1)
  • 3/4 in (1)
  • 3/8 in (1)
  • 30 (4)
  • 3-1/16 in (1)
  • 3-1/2 in (2)
  • 3-1/4 in (4)
  • 3-3/16 in (2)
  • 3-3/4 in (4)
  • 3-3/8 in (2)
  • 3-5/16 in (2)
  • 3-5/8 in (1)
  • 3-7/32 in (4)
  • 39.3 (1)
  • 3-9/16 in (1)
  • 3-9/32 in (2)
  • 4 (4)
  • 4 in (4)
  • 4.00 in (1)
  • 4.062 (1)
  • 4.07 (1)
  • 4.5 in (1)
  • 4.56 (1)
  • 4.63 in (1)
  • 4.75 in (1)
  • 4.750 in (1)
  • 4-1/16 in (1)
  • 4-1/2 in (1)
  • 4-1/4 in (3)
  • 4-1/8 in (1)
  • 4-13/16 in (2)
  • 4-23/32 in (2)
  • 4-3/16 in (1)
  • 4-3/32 in (2)
  • 4-3/4 in (2)
  • 4-3/8 in (2)
  • 4-5/16 in (1)
  • 4-7/16 in (1)
  • 4-7/8 in (3)
  • 5 (2)
  • 5.000 (1)
  • 5.250 (1)
  • 5/8 in (3)
  • 5-1/2 in (1)
  • 5-1/4 in (1)
  • 5-11/16 in (1)
  • 55 yd (1)
  • 5-5/8 in (2)
  • 5-7/16 in (1)
  • 6 in (2)
  • 6 in (Lead) (2)
  • 6.5 in (1)
  • 60 (21)
  • 60 ft (2)
  • 6-1/2 in (2)
  • 6-1/4 in (1)
  • 6-3/16 in (1)
  • 66 (11)
  • 6-7/8 in (1)
  • 7/16 in (1)
  • 7/8 in (3)
  • 72 (2)
  • 8 (1)
  • 8 in (1)
  • 9/16 in (2)
  • Show More...

• Maximum Conductor Size

  

  • #1 AWG (3)
  • #1 AWG (Solid);2/0 AWG (Stranded) (1)
  • #1 AWG (Solid);4/0 AWG (Stranded) (1)
  • #1 AWG (Stranded) (1)
  • #1/0 AWG (2)
  • #10 AWG (Range of Equal Main and Tap-Stranded);#16 AWG (Minimum Tap with one Maximum Main-Stranded) (1)
  • #12 AWG (3)
  • #2 AWG (4)
  • #2 AWG (Range of Equal Main and Tap-Stranded);#14 AWG (Minimum Tap with one Maximum Main-Stranded) (1)
  • #2 AWG (Stranded) (3)
  • #4 AWG (7)
  • #4 AWG (Range of Equal Main and Tap-Stranded);#16 AWG (Minimum Tap with one Maximum Main-Stranded) (1)
  • #4 AWG (Stranded) (1)
  • #4 AWG (Stranded);#14 AWG (Solid) (1)
  • #6 AWG (6)
  • #6 AWG (Range of Equal Main and Tap-Stranded);#16 AWG (Minimum Tap with one Maximum Main-Stranded) (1)
  • #6 AWG (Stranded) (1)
  • #8 AWG (2)
  • #8 AWG (Range of Equal Main and Tap-Stranded);#16 AWG (Minimum Tap with one Maximum Main-Stranded) (1)
  • #8 AWG;#10 AWG (1)
  • (1) #10 AWG;(2) #14 AWG;(1) #16 AWG (1)
  • (1) #8 AWG;(3) #10 AWG (1)
  • (3) #10 AWG (2)
  • (3) #12 AWG (2)
  • (3) #16 AWG (2)
  • (4) #12 AWG (2)
  • (4) #16 AWG;(1) #20 AWG (2)
  • (5) #12 AWG (5)
  • 1/0 AWG (6)
  • 1/0 AWG (Stranded) (1)
  • 1/0 AWG (Stranded);#4 AWG (Solid) (1)
  • 2/0 AWG (4)
  • 2/0 AWG (Range of Equal Main and Tap-Stranded);#14 AWG (Minimum Tap with one Maximum Main-Stranded) (1)
  • 2/0 AWG (Stranded) (2)
  • 250 MCM (11)
  • 250 MCM (Range of Equal Main and Tap-Stranded);1/0 AWG (Minimum Tap with one Maximum Main-Stranded) (1)
  • 3/0 AWG (7)
  • 3/0 AWG (Stranded) (1)
  • 300 MCM (1)
  • 350 MCM (6)
  • 500 MCM (9)
  • 600 kcmil (1)
  • 600 MCM (3)
  • 750 MCM (2)
  • Show More...

• Shape

  

  • Angle (7)
  • Hex (9)
  • Round (66)
  • Square (1)
  • Straight (16)
  • Show More...

• Diameter

  

  • 0.406 in (1)
  • 0.618 in (1)
  • 0.938 in (1)
  • 0.94 in (2)
  • 0.975 in (4)
  • 1 in (3)
  • 1 in (1 Hole);7/8 in (2 Hole);1-5/16 in (3 Hole) (1)
  • 1 in (Inside);1-1/2 in (Outside) (1)
  • 1 in (Inside);1-11/16 in (Outside) (1)
  • 1 in (Inside);2-3/16 in (Outside) (1)
  • 1.065 in (1)
  • 1.08 in (1)
  • 1.19 in (2)
  • 1.220 in (2)
  • 1.312 in (2)
  • 1.44 in (3)
  • 1.478 in (1)
  • 1.562 in (1)
  • 1.69 in (1)
  • 1.878 in (1)
  • 1.88 in (2)
  • 1.880 in (1)
  • 1/2 in (2)
  • 1/2 in (ID) (2)
  • 1-1/16 in (5)
  • 1-1/16 in (Inside);1-3/4 in (Outside) (1)
  • 1-1/16 in (Inside);2-1/4 in (Outside) (1)
  • 1-1/16 in (Inside);2-5/8 in (Outside) (1)
  • 1-1/16 in (Inside);3-1/4 in (Outside) (1)
  • 1-1/2 in (5)
  • 1-1/32 in (4)
  • 1-1/4 in (3)
  • 1-1/8 in (13)
  • 1-11/16 in (6)
  • 1-11/16 in (Inside);2-5/8 in (Outside) (1)
  • 1-11/16 in (Inside);3-1/4 in (Outside) (2)
  • 1-13/16 in (1)
  • 1-15/16 in (5)
  • 1-15/16 in (Inside);2-7/8 in (Outside) (1)
  • 1-17/32 in (6)
  • 1-29/32 in (1)
  • 13/16 in (1)
  • 1-3/16 in (2)
  • 13/16 in (Inside);1-1/2 in (Outside) (1)
  • 13/16 in (Inside);1-1/8 in (Outside) (1)
  • 13/16 in (Inside);1-11/16 in (Outside) (1)
  • 13/16 in (Inside);2-3/16 in (Outside) (1)
  • 1-3/4 in (5)
  • 1-3/4 in (3 Hole);1-1/8 in (4 Hole) (2)
  • 1-3/8 in (8)
  • 1-3/8 in (Inside);2-1/4 in (Outside) (1)
  • 1-3/8 in (Inside);2-5/8 in (Outside) (1)
  • 1-3/8 in (Inside);3-1/4 in (Outside) (1)
  • 15/16 in (3)
  • 1-5/16 in (6)
  • 1-5/16 in (Inside);1-11/16 in (Outside) (1)
  • 1-5/16 in (Inside);2-3/16 in (Outside) (1)
  • 1-7/16 in (5)
  • 1-7/8 in (2)
  • 1-9/16 in (2)
  • 1-9/16 in (Inside);2-3/16 in (Outside) (1)
  • 1-9/32 in (2)
  • 2 in (4)
  • 2 in (Inside);3-1/4 in (Outside) (2)
  • 2.06 in (1)
  • 2.08 in (1)
  • 2.090 in (1)
  • 2.113 in (1)
  • 2.18 in (1)
  • 2.375 in (1)
  • 2.390 x 1.188 x 1.375 in (1)
  • 2.44 in (1)
  • 2.5 in (1)
  • 2.56 in (1)
  • 2.563 in (1)
  • 2.750 in (1)
  • 2.94 in (1)
  • 2-1/16 in (2)
  • 2-1/2 in (1)
  • 2-1/2 in (Inside);4-1/2 in (Outside) (2)
  • 2-1/2 in (Inside);5-1/2 in (Outside) (1)
  • 2-1/4 in (2)
  • 2-1/8 in (4)
  • 2-11/16 in (4)
  • 2-13/16 in (1)
  • 2-15/16 in (3)
  • 2-15/16 in (Inside);4-1/2 in (Outside) (1)
  • 2-3/16 in (2)
  • 2-3/8 in (4)
  • 2-5/16 in (Inside);3-1/2 in (Outside) (1)
  • 2-5/32 in (3)
  • 2-5/8 in (7)
  • 2-7/16 in (1)
  • 2-7/8 in (2)
  • 2-9/16 in (3)
  • 3 in (1)
  • 3.25 in (1)
  • 3.26 in (1)
  • 3.62 in (1)
  • 3.89 in (2)
  • 3/8 in (1)
  • 3/8 in (2 Hole);7/16 in (3 Hole) (1)
  • 3-1/8 in (2)
  • 3-11/16 in (2)
  • 3-13/16 in (1)
  • 3-13/64 in (1)
  • 3-3/16 in (4)
  • 3-3/4 in (1)
  • 3-3/8 in (3)
  • 3-5/16 in (1)
  • 3-7/16 in (2)
  • 3-7/8 in (1)
  • 3-9/16 in (Inside);5-1/2 in (Outside) (1)
  • 4.25 in (1)
  • 4-1/16 in (1)
  • 4-1/2 in (1)
  • 4-1/32 in (2)
  • 4-1/8 in (2)
  • 4-13/16 in (5)
  • 4-5/16 in (4)
  • 4-5/8 in (1)
  • 4-7/16 in (1)
  • 4-7/8 in (1)
  • 5 in (2)
  • 5.25 in (1)
  • 5.75 in (1)
  • 5/16 in (1)
  • 5/8 in (Inside);1-1/8 in (Outside) (1)
  • 5/8 in (Inside);2-3/16 in (Outside) (1)
  • 5/8 in (Inside);7/8 in (Outside) (1)
  • 5-1/4 in (1)
  • 5-1/8 in (3)
  • 5-3/8 in (2)
  • 7/16 in (1 Hole);5/8 in (2 Hole);3/4 in (3 Hole) (1)
  • 7/16 in (2 Hole);1/2 in (3 Hole) (1)
  • 7/16 in (2 Hole);5/8 in (3 Hole) (1)
  • 7/8 in (4)
  • 7/8 in (Inside);1-1/2 in (Outside) (1)
  • 7/8 in (Inside);1-3/4 in (Outside) (1)
  • 7/8 in (Inside);2-1/4 in (Outside) (1)
  • 7/8 in (Inside);2-5/8 in (Outside) (1)
  • 7/8 in (Inside);3-1/4 in (Outside) (1)
  • 9/16 in (1)
  • 9/16 in (1 Hole);3/4 in (2 Hole);1 in (3 Hole) (1)
  • Show More...

• Color

  

  • Aluminum (22)
  • Beige (5)
  • Black (142)
  • Black Base-Clear Panels and Covers (2)
  • Black Lettering - Orange Background (1)
  • Blue (41)
  • Blue (Handle);Black (Blade) (1)
  • Brass (1)
  • Brass Pull Chain (1)
  • Bronze (1)
  • Brown (27)
  • Clear (17)
  • Clear/Transparent (2)
  • Copper (24)
  • DAWN MIST (2)
  • Gray (35)
  • Gray;Grey (1)
  • Green (28)
  • Grey (12)
  • Grey with Black Insulator (27)
  • Ivory (8)
  • Light Grey (1)
  • OLIVE (2)
  • Orange (11)
  • Pink (14)
  • Purple (11)
  • Red (46)
  • Red (Main) - Red (Tap) (1)
  • Red, Blue, Yellow (1)
  • Red/Tan (1)
  • RED/YELLOW (2)
  • RUBY (2)
  • Silver (12)
  • Steel (2)
  • Tan (8)
  • Tan, Yellow, Red, & Blue (1)
  • Tan/Red (1)
  • Tin Plated Copper (12)
  • Violet (3)
  • White (43)
  • Yellow (54)
  • Yellow (Handle) (1)
  • Yellow;Black (2)
  • Show More...

• Insulation Material

  

  • Aluminum (4)
  • Bronze (1)
  • Copper (3)
  • EPDM Rubber (2)
  • Flame Retardant Polycarbonate (3)
  • Plastisol (36)
  • Silicon Bronze (31)
  • Silicone Bronze (4)
  • Thermoplastic (17)
  • Vinyl (1)
  • Zinc Alloy (1)
  • Show More...

• Conductor Material

  

  • Aluminum (5)
  • Aluminum;Copper (19)
  • Brass/Stainless Steel (1)
  • Brass/Stainless Steel/Steel (2)
  • Copper (54)
  • Copper/Aluminum (9)
  • Copper;Aluminum (26)
  • Copper;Aluminum;ACSR (2)
  • Copper;Copperweld (7)
  • Copper;Tin Plated Stainle (3)
  • Die-Cast Zinc/Steel (1)
  • Show More...

• Insulation Color

  

  • Black (37)
  • Blue (7)
  • Bronze (1)
  • Brown (2)
  • Brown (Code) (1)
  • Clear (1)
  • Gray (9)
  • Gray (Code) (1)
  • Green (3)
  • Orange (2)
  • Pink (1)
  • Purple (3)
  • Red (7)
  • Red;Blue;Yellow (1)
  • Silver (2)
  • Tan (2)
  • Tan;Yellow;Red;Blue (1)
  • Yellow (5)
  • Show More...

• Width

  

  • .576 (1)
  • .750 (34)
  • 0.165 (1)
  • 0.187 (1)
  • 0.187000000000000 (2)
  • 0.300000000000000 (1)
  • 0.311 (2)
  • 0.525 in (1)
  • 0.537 in (1)
  • 0.61 in (1)
  • 0.625 in (2)
  • 0.63 in (2)
  • 0.635 in (1)
  • 0.75 in (6)
  • 0.750000000000000 (2)
  • 0.88 in (2)
  • 0.953 in (1)
  • 1 in (6)
  • 1.00 (1)
  • 1.070 (1)
  • 1.188 in (1)
  • 1.205 in (1)
  • 1.21 in (1)
  • 1.218 in (1)
  • 1.225 (1)
  • 1.23 in (1)
  • 1.24 in (1)
  • 1.25 in (2)
  • 1.375 (1)
  • 1.468 in (1)
  • 1.470 in (1)
  • 1.5 (2)
  • 1.500000000000000 (2)
  • 1.625 (1)
  • 1.875 in (1)
  • 1.9 in;50 mm (1)
  • 1/2 in (3)
  • 1/4 in (1)
  • 1/8 in (2)
  • 11/16 in (2)
  • 1-1/2 in (2)
  • 1-1/4 in (10)
  • 1-1/8 (1)
  • 1-13/16 in (1)
  • 1-15/16 in (2)
  • 13/16 in (4)
  • 1-3/16 in (1)
  • 1-3/8 in (3)
  • 1-5/16 in (1)
  • 1-5/8 in (4)
  • 1-7/8 in (1)
  • 1-9/16 in (1)
  • 2 (1)
  • 2 in (2)
  • 2.000000000000000 (2)
  • 2.125 in (1)
  • 2.25 (1)
  • 2.5 in (1)
  • 2.656 in (1)
  • 2-1/2 in (1)
  • 2-1/8 in (1)
  • 2-11/16 in (2)
  • 2-3/16 in (1)
  • 2-3/8 in (3)
  • 2-7/16 in (1)
  • 2-7/8 in (1)
  • 2-9/16 in (1)
  • 3 in (1)
  • 3.187 in (1)
  • 3.5 (1)
  • 3/16 in (8)
  • 3/8 in (1)
  • 3-1/16 in (1)
  • 3-1/4 in (1)
  • 3-1/8 in (1)
  • 3-11/16 in (1)
  • 3-13/16 in (1)
  • 3-3/8 in (1)
  • 35 (1)
  • 4 (2)
  • 4.000000000000000 (1)
  • 4.125 (1)
  • 4.23 in (1)
  • 4.25 (1)
  • 4.250 (1)
  • 4.625 (1)
  • 4.75 (1)
  • 4-1/16 in (1)
  • 4-1/2 in (1)
  • 4-1/8 in (1)
  • 4-13/16 in (1)
  • 4-5/16 in (1)
  • 5.1875 (1)
  • 5/8 in (1)
  • 5-3/16 in (1)
  • 5-3/4 in (1)
  • 7/16 in (1)
  • 7/32 in (1)
  • 7/8 in (9)
  • 7-7/16 in (1)
  • 9 in (2)
  • 9/16 in (1)
  • 9/64 in (1)
  • Show More...

• For Use With

  

  • #22 to #12 AWG Solid;Stranded Wire (3)
  • 1/2 in EMT;14/2 and 12/2 Romex Non-Metallic Cable (1)
  • 14/2 to 10/3 AWG (0.40 in to 0.63 in) Aluminum and Steel AC/MC/MCI-A/HCF;3/8 in Aluminum and Steel FMC/RWFMC (1)
  • AC/MC Cable (9)
  • AC/MC/HCF Cable 10/4 AWG(0.61 in) to 8/3 AWG (0.87 in) (1)
  • AC/MC/MCI-A 14/2 AWG (0.375 in) to 10/3 AWG (0.625 in) HCF/HCFMCI-A 3/8 in FMC and 14/2 to 10/3 AWG NM Cable (1)
  • AC/MC/MCI-A/HCF/HCFMCI-A/FMC .40-.62 Cable to Box/Enclosure (1)
  • Aluminum or Steel Electrical Metallic Tubing (9)
  • Box;Enclosure (32)
  • Connect AC/MC/MCI-A/NM-B Cable to Box or Enclosure;12/2 AWG(0.44 in) to 10/3 AWG (0.53 in) For use with HCF/HCFMCI-A (1)
  • Connect MC &AC or 3/8 in Flexible Metal Conduit to box or enclosure;14/2 AWG (0.38 in) to 10/3 AWG (0.61 in)AC/MC/MCI-A/HCF/HCFMCIA (1)
  • Connect Single Round Service Entrance Cable to Box or Enclosure (5)
  • Connecting 14/2 AWG (0.38 in) to 10/3 (.53 in) Armored;Metal Clad Cable to Box or Enclosure MC/MCI-A/HCFMCI-A (1)
  • Connecting 14/2 to 10/3 Aluminum or Steel AC/MC Cable or 3/8” Flexible Metal Conduit to a Box/Enclosure. Patent Pending (2)
  • Connecting EMT to Box or Enclosure (6)
  • Connecting Nonmetallic Cable to Box or Enclosure (6)
  • Connecting one or two Conductors;Direct Burial in Earth or Concrete (3)
  • Copper and Aluminum Conductor (2)
  • Copper Cables;Aluminum Cables (6)
  • Copper or Aluminum Conductors (2)
  • Copper Wire (3)
  • Decorative Ligting (3)
  • Electrical Service Mast;Galvanized Electrical Service Mast;Plastic Electrical Service Mast;Cast Iron Electrical Service Mast (1)
  • Electrical;Telecommunications Cable (6)
  • EMT and Rigid Conduit (8)
  • EMT and Rigid Conduit to Threaded Rod (16)
  • EMT Conduit (52)
  • EMT to Box or Enclosure (7)
  • EMT to Flexible Metal Conduit (1)
  • EZ-RJ45 Crimp & Trim System;EZ-RJ45 CAT5e Connectors;EZ-RJ45 Shielded CAT5e Connectors;EZ-RJ45 CAT6 Connectors;EZ-RJ12/11 Connectors and All Other RJ45, RJ12 and RJ11 Modular Plug Connectors Except Amp (1)
  • Fasten Threaded Connectors/Nipples to Box/Enclosure (1)
  • Fasten Threaded Rigid/IMC Conduit to Box/Enclosure (10)
  • Flexible Metal Conduit (14)
  • Flexible Metal Conduit;12/3 to 10/3 steel or aluminum MC cable (2)
  • Flexible Metal Conduit;EMT (2)
  • Gas or Electric Heating Device (2)
  • Grounding Wire (19)
  • Inspection;Pulling and Maintenance (5)
  • Join EMT to Box or Enclosure (6)
  • Locknut;Box or Connector (10)
  • Maintenance Cart (1)
  • Mechanical Time Switch (1)
  • Metallic and Non-Metallic "Type B" Liquid Tight Conduit (14)
  • Metallic or Nonmetallic Electrical Boxes (2)
  • Mounting Pendant Or Fluorescent Lighting Fixtures to Ceiling Box (1)
  • Non-Metallic "type B" Liquid Tight Conduit. PVC Construction with Zinc Locknut (1)
  • Nonmetallic Type B Liquid Tight Conduit (2)
  • Occupancy or Light Sensors (1)
  • Offset the Axis of Raceway 3/4" (6)
  • Pipe (2)
  • Pole Lanterns-Lawn Lighting (3)
  • Portable Cord (6)
  • Protection of Electrical;Voice;Data and Video Cables (1)
  • Pump;Water heaters;Fans (1)
  • Rigid and IMC Conduit (32)
  • Rigid Conduit;IMC Conduit (10)
  • Rigid Service Entrance Conduit to Box or Enclosure (1)
  • Rigid/IMC Conduit;Solar and other Outdoor Installations (1)
  • Rigid;IMC and EMT conduit (1)
  • Secure Emt to Box or Enclosure (9)
  • Secure Steel EMT to Box or Enclosure;Concrete-Tight when Taped (6)
  • Service Entrance Mast (2)
  • Snap-On Type Strap used to Support Round Steel or Aluminum Metal Clad Cable;Diameter for 14/2 AWG (0.475 in) to 12/2 AWG (0.525 AWG) (1)
  • Snap-On Type Strap used to Support Round Steel or Aluminum Metal Clad Cable;Diameter for 14/3 AWG (0.540 in) to 12/3 AWG (0.590 AWG) (1)
  • Splicing Two Copper or Aluminum Wire (2)
  • Standard Shield RG6-U Cable (1)
  • Steel and Aluminum EMT (6)
  • Steel and Aluminum EMT;Steel and Aluminum Rigid Conduit (3)
  • Steel;Aluminum EMT (3)
  • Steel;Aluminum Rigid Conduit (2)
  • Street-Highway Lighting (1)
  • Support EMT to Mounting Surface (2)
  • Support Metal Clad Cable (1)
  • Supporting AC/MC/FMC;Accomodates Steel and Aluminum AC/MC/FMC;AC/MC/MCIA with an Outer Diameter of 0.425 in (14/2 AWG) to 0.61 in (10/3 AWG) in FMC in 3/8 in Trade Size (1)
  • Terminate Service Conduit to Cabinet (11)
  • Terminate;Splice;Tap Power Connector (1)
  • Terminate;Splice;Tap Power Connectors (18)
  • Threaded Conduit (1)
  • Time Switch;24 Hour Dial (1)
  • To Join EMT to Box or Enclosure (29)
  • Turn Lock Photocontrol (1)
  • Two Lengths of EMT Conduit;Rigid and IMC Conduit (4)
  • Used to Connect Non-Metallic Cable to Box or Enclosure (4)
  • Used to Join Steel Emt to Box or Enclosure;Concrete-Tight 1/2 in Thru 2 in Suitable for use with Steel or Aluminum Emt (9)
  • Wedge Clamps Are Used For Dead-Ending Self Supporting Drop Wire (1)
  • Wire Installation (1)
  • Wire Termination (21)
  • Wire Termination;Copper and Aluminum Cable (9)
  • Wire Termination;Copper and Aluminum Conductor (15)
  • Wire Termination;Copper or Aluminum Conductors (2)
  • Wire Termination;Fine Stranded Flexible Copper Conductor (3)
  • Wire Termination;Fine Stranded Flexible Copper Conductors (3)
  • Show More...

• Special Features

  

  • # 1 AWG (STR) - CU Splice (2)
  • # 2 AWG (STR) - 1/4 Mounting Hole (2)
  • # 4 AWG (STR) - 1/4 Mounting Hole (2)
  • # 6 AWG (STR) - 1/4 Mounting Holes - 5/8 Hole Spacing (3)
  • # 8 AWG (STR) - 3/8 Mounting Hole (2)
  • # 8 AWG (STR) - CU Splice (2)
  • (1) 500 MCM-4 AWG (Line Side) - (1) 500 MCM-4 AWG (Load Side) - 380 Amps Per Pole (1)
  • (12) 350 MCM-6 AWG - Dual Rated - With Mounting Holes (1)
  • (2) 1/0-14 AWG - Dual Rated (1)
  • (2) 1/0-14 AWG - Dual Rated - Offset Ports (1)
  • (2) 2/0-14 AWG (Line Side) - (6) 4-14 AWG (Load Side) - 350 Amps Per Pole (2)
  • (2) 3/0-6 AWG - Dual Rated (1)
  • (2) 3/0-6 AWG - Dual Rated - Offset Ports (1)
  • (2) 350 MCM-6 AWG - Dual Rated (1)
  • (2) 4-14 AWG - Dual Rated (1)
  • (2) 4-14 AWG - Dual Rated - Offset Ports (1)
  • (2) 750-250 MCM - Dual Rated (2)
  • (3) 1/0-14 AWG - Dual Rated (1)
  • (3) 250 MCM-6 AWG - Dual Rated (1)
  • (3) 250 MCM-6 AWG - Dual Rated - With Mounting Holes (1)
  • (3) 3/0-6 AWG - Dual Rated (1)
  • (3) 350 MCM-6 AWG - Dual Rated - With Mounting Holes (1)
  • (3) 4-14 AWG - Dual Rated (1)
  • (3) 500 MCM-4 AWG - Dual Rated (1)
  • (4) 250 MCM-6 AWG - Dual Rated (1)
  • (5) 350 MCM-6 AWG - Dual Rated (1)
  • (6) 350 MCM-6 AWG - Dual Rated (1)
  • (6) 500 MCM-4 AWG - Dual Rated - With Mounting Holes (1)
  • (8) 350 MCM-6 AWG - Dual Rated (1)
  • (8) 500 MCM-4 AWG - Dual Rated (1)
  • .472 OD-.354 ID - .354-2.56 Bundle Range (2)
  • 1 1/2 Pipe Size IN (2)
  • 1 hole 1" dia., 3 holes 7/8" dia., 3 holes 1-5/16" dia. (1)
  • 1/0 AWG (STR) - 1/2 Mounting Holes - 1 3/4 Hole Spacing (2)
  • 1/0 AWG (STR) - 3/8 Mounting Hole (2)
  • 1/0 AWG (STR) - CU Splice (2)
  • 1/0-14 AWG - Dual Rated (1)
  • 1/2 Conduit Mount - Time Delay On And Off - Cadmium Sulphide Epoxy Coated 1 Diameter Cell IN (1)
  • 1/2 Conduit Mount - Time Delay On And Off - Cadmium Sulphide Epoxy Coated 1/2 Diameter Cell IN (3)
  • 1/2 Hub Size - 10 SOL - 2/0 STR (1)
  • 1/2 in Conduit Mount;Time Delay On and Off;Cadmium Sulphide Epoxy Coated 1 in Diameter (1)
  • 1/2 in Conduit Mount;Time Delay On and Off;Cadmium Sulphide Epoxy Coated 1/2 in Diameter (1)
  • 1/2 to 1 in Pipe Size - 3/8-1 in Rebar - 1/2 to 1 in Ground Rod (2)
  • 10 Replacement Sleeves Per Bag (3)
  • 100kA Short Circuit Current Rated (SCCR), Din Rail Mount with Locking Mechanism to lock/release block on Din Rail, Multi Pole Ganging, Finger Safe Lexan 500R Polycarbonate Panels & Covers. (2)
  • 12/4, 10/2, 10/3, 2/1 (1)
  • 120 to 480 Volt Receptacle With Plastic Housing and Bracket (1)
  • 126 cubic cm/7.7 cubic in vilume 3 #6 AWG Max Wire Size (1)
  • 14" - 100 Pack - 250 lbs Tensile Strength - Max Bundle Diameter - 3.94" (1)
  • 147 cubic cm/9.0 cubic in volume 3 #6 AWG Max Wire Size (1)
  • 2 holes 3/8" dia., 3 holes 7/16" dia. (1)
  • 2 holes 7/16" dia., 3 holes 1/2" dia. (1)
  • 2 holes 7/16" dia., 3 holes 5/8" dia. (1)
  • 2/0 AWG (STR) - 1/2 Mounting Holes - 1 3/4 Hole Spacing (2)
  • 2/0 STR-350 MCM - 3 Pack (1)
  • 20 On-Off Set Points - Daylight Savings Auto - Leap Year Automatic Compensation (2)
  • 20 On-Off Set Points - Daylight Savings Auto - Leap Year Automatic Compensation (4)
  • 20.5" - 100 Pack - 250 lbs Tensile Strength - Max Bundle Diameter - 5.90" (1)
  • 227 cubic cm/13.8 cubic in volume 3#4 AWG Max Wire Size (1)
  • 250 MCM (STR) - 1/2 Mounting Hole (2)
  • 250 MCM (STR) - 1/2 Mounting Holes - 1 3/4 Hole Spacing (2)
  • 250 MCM (STR) - 3/0 Pin Size (2)
  • 250 MCM (STR) - CU Splice (2)
  • 250 MCM-6 AWG - Dual Rated (1)
  • 2-6 AWG - Indoor or Outdoor Use For Power Communication With Cover (2)
  • 3 holes 1-3/4" dia., 4 holes 1-1/8" dia. (3)
  • 3/0 AWG (STR) - 1/2 Mounting Hole (2)
  • 3/0 AWG (STR) - 1/2 Mounting Holes - 1 3/4 Hole Spacing (2)
  • 3/0 AWG (STR) - 3/8 Mounting Hole (2)
  • 3/0 AWG (STR) - CU Splice (2)
  • 350 MCM (STR) - 1/2 Mounting Hole (3)
  • 350 MCM (STR) - 1/2 Mounting Holes - 1 3/4 Hole Spacing (2)
  • 350 MCM (STR) - 250 Pin Size (2)
  • 350 MCM-6 AWG - Dual Rated (1)
  • 4 holes 5/16" dia. (1)
  • 4/0 AWG (STR) - 1/2 Mounting Holes - 1 3/4 Hole Spacing (2)
  • 4/0 AWG (STR) - 2/0 Pin Size (2)
  • 4/0 AWG (STR) - 3/8 Mounting Hole (2)
  • 4/0 AWG (STR) - CU Splice (2)
  • 400 MCM (STR) - 1/2 Mounting Holes - 1 3/4 Hole Spacing (2)
  • 480 VAC Max 1800 Tungsten 1800VA Ballast Shorting Cap (1)
  • 5/8 to 3/4 in Rod - 3/8 in Pipe Size (2)
  • 50 Micron Gold Plated Contacts (2)
  • 500 MCM (STR) - 1/2 Mounting Hole (3)
  • 500 MCM (STR) - 350 Pin Size (2)
  • 500 MCM (STR) - CU Splice (2)
  • 6 STR-4/0 SOL - 6 Pack (1)
  • 7 On and Off Pairs of Set Points Each Day-Asronomic-Random Mode-Daylight Saving (2)
  • 750 MCM (STR) - 500 Pin Size (2)
  • 8 SOL-1/0 STR - 20 Pack (1)
  • A Groove-3 4 6 6 (ACSR) - 2 3 4 (STR) - 1 2 3 4 (SOL) - B Groove- 8 10 12 14 (STR) - 8 10 12 14 (SOL) (1)
  • Abrasion Resistan;Chemical Resistant;UV Resistant (4)
  • Abrasion Resistant;Chemical Resistant (3)
  • Abrasion Resistant;Chemical Resistant;UV Resistant (31)
  • Ball Burnished, mirror smooth finish (11)
  • Ball Type Swivel Fixture (2)
  • Black Color, rated 150 degree C. (9)
  • Bridgeport Fittings Products are safety listed to ensure code compliance. With our wide selection of fittings, Bridgeport has a connector, coupling or transition fitting to meet your needs. (2)
  • Clamp Type Connector (4)
  • Comes with Carriage Bolt and Nut (3)
  • Compact Design (3)
  • Concrete Tight (25)
  • Concrete Tight/Raintight (2)
  • Concretetight (9)
  • Concrete-Tight (58)
  • Concrete-tight when taped (4)
  • Concrete-tight/Raintight (6)
  • Concretetight;Raintight (6)
  • Concrete-Tight;Raintight (26)
  • Connectors assembled with knockout gasket, no separate pieces to buy and stock (11)
  • Copper Bar With Isolation Base - 10 Circuits (1)
  • Copper Crimp Sleeves - 100 Pcs Blister (1)
  • Corrosion Resistant (3)
  • Does not require trimming and is completely hidden by faceplate (3)
  • DPDT - On-Off-On - Screw Type Connectors (1)
  • DPST - On-Off - Quick Connect Terminals (1)
  • DPST 24 Hour Time Switch - Same Day On-Off Times Each Day (4)
  • Dual Rated For Use With Copper And Aluminum Cable (2)
  • Duplex (1)
  • Easy Roll-On Way To Insulate And Seal Cable - Made Of EPDM Elastomer (2)
  • Electro-Tin Plated for Low Contact Resistance (6)
  • Excellent Adhesion and Elasticity, All Weather Performance, High Tensile Strength, Resistant to UV, Abrasion and Corrosion, Flae-Retardant. (10)
  • Excellent for Continuous Loop Grounding and Bonding (3)
  • Excellent for Grounding and Continuous loop Applications;Made of 6061T-6 Aluminum Alloy (2)
  • Extremely Flexible with Good Adhesion and Conformability (2)
  • Fast Reliable To Connect 12 And 14 AWG Circuits Using Non-Metallic Cable (3)
  • Fixed;Precise Square Wire Spring Provides Secure Gripping of Conductors (17)
  • Flexible Skirt covers over strip and conforms to fit into tight spaces - Fixed precise square wire spring provides secure gripping of conductors - Flame retardant UL 94V-2 thermoplastic shell provides excellent electrical insulation - Zinc-plated spring for low contact resistance (4)
  • Flush Mount With Gasket And Nut Supplied (2)
  • For both indoor and outdoor use (2)
  • For Combinations of Aluminum to Copper;Aluminum to Aluminum;Steel to Aluminum;Copper to Copper;Steel to Copper Applications (2)
  • For Rigid and IMC Conduit (19)
  • For Service Entrance (2)
  • For use in Wet Locations in Canada Only (9)
  • For use with Large Connector Blocks - # 12 Bolt Size (1)
  • For use with Medium Connector Blocks - # 9 Bolt Size (1)
  • For use with Small Connector Blocks - # 6 Bolt Size (1)
  • Four Port Design With Dual Rated Mecahnical Connector (2)
  • Furnished with 2-way Phillips/Slotted Head Screw (35)
  • Furnished with Tri-Drive screw (8)
  • Furnished with Tri-Drive slot/Phillips/Robertson head screws (13)
  • Furnished with Tri-Drive Slotted/Phillips/Robertson Screw (5)
  • Galvanized - for use with galvanized, plastic, or cast iron electrical service mast (4)
  • Galvanized for superior corrosion resistance. (2)
  • Good Ahesion and Elasticity, All Weather Performance, Great Tensile Strength, Resistant Tto UV, Abrasion and Corrosion, Falme-Retardant. (10)
  • Grounding Lug Wire Capacity # 14 - #4 (4)
  • Grounding Lug Wire Capacity # 4 - #1/0 (3)
  • Grounding Lug Wire Capacity #14 - #1/0 (2)
  • Grounding Lug Wire Capacity #14 - #1/0;Lug Provided for Bonding Jumper to Neutral Busbar. Grounding Lug: Aluminum Alloy 6061-T6. Plastic Metaliner Prevents Damage to Wire Insulation (7)
  • Grounding Lug Wire Capacity #14 - #4;Lug Provided for Bonding Jumper to Neutral Busbar. Grounding Lug: Aluminum Alloy 6061-T6. Plastic Metaliner Prevents Damage to Wire Insulation (3)
  • Grounding Lug Wire Capacity #6 - #250 MCM (4)
  • Grounding Lug Wire Capacity #6 - 250MCM (2)
  • HCF (4)
  • Hcf/Hcfmci-A (9)
  • Heavy duty material and zinc plating thickness (13)
  • High Strength Solderless Service Connector (7)
  • Hole Diameter 3/16" (2)
  • Hole diameter is 0.265" (5)
  • Install by Snapping Cable into Place, then Snapping Connector into the Box;No Tools Required (1)
  • Install from outside or inside outlet box or enclosure. (2)
  • Insulated Bushing (10)
  • Insulated Throat 105°C (2)
  • Insulator Rated 105 °C (5)
  • Insulator Rated 105 degree C (2)
  • Integral internal spring steel locking tabs fasten cable or conduit. Suitable for maintaining grounding continuity when installed in accordance with NEC. (3)
  • Ivory 30 Minute No Hold in Wall Time Switch (1)
  • Ivory 60 Minute No Hold in Wall Time Switch (1)
  • K.O. Size 1/2" (2)
  • K.O. Size 2-1/2" (1)
  • K.O. Size 3" (1)
  • Knockout Bushing (6)
  • Liquid Tight and Water Tight Protection (6)
  • Listed for use with AC / AC90 / ACG90 / MC / MCI-A / HCFMCI-A / MC-PCS Cable*. cETLus Listed. (4)
  • Long Barrel;High Conductivity (11)
  • Made of High Copper Alloy;Re-usable (3)
  • Made with Vinyl Impregnated Cloth, strong adhesive ensures marking will last (2)
  • Malleable Iron Body with Steel Ferrule (6)
  • Marked with Die Index and Color Coded (2)
  • Max load is 1000 lbs (3)
  • Neoprene - for use with copper, cast iron, galvanized, or plastic pipe. (2)
  • No Hold 60 Minute Commercial Grade in Wall Time Switch (3)
  • No need to strip wire - No tape or cover needed - Exclusive turbo spacer keeps tap side open while main conductor is being tightened (3)
  • Non-Insulated Ring Terminal 12-10 AWG - 50 Pack (2)
  • Non-Insulated Ring Terminal 6 AWG - 50 Pack (3)
  • Non-Insulated Ring Terminal 8 AWG - 50 Pack (2)
  • Nylon Insulated 12-10 AWG - 50 Pack (2)
  • Nylon Insulated Locking Spade Terminal 12-10 AWG - 50 Pack (1)
  • Nylon Insulated Ring Terminal 12-10 AWG - 50 Pack (2)
  • Nylon Insulated Spade Terminal 16-14 AWG - 100 Pack (1)
  • Nylon Insulated Spade Terminal 16-14 AWG - 100 Pack (1)
  • Nylonn 66 Housing - 300 Volt Rated (2)
  • One Hole Strap (10)
  • Parallel (2)
  • Plain Finish (7)
  • Plastic Insulator Rated 105 Degree C (6)
  • Polyethylene with Steel Retainer (8)
  • Protect the connector; Prevent tangled messes; Eliminate broken release/locking tabs; Relieve stress on cable; Help maintain radius bend; Color code designated; Cover the external ground on shielded connectors; Max Cable OD: From 0.217; Manufactured from ABS material. (1)
  • Provides positive visual identification and can withstand the harshest environmental conditions. (3)
  • Provides raintight seal (10)
  • Quick Install E-Z Lock (2)
  • Raintight (13)
  • Raintight/Concrete-Tight (2)
  • Removable aluminum cover to facilitate wire pulling (2)
  • Removable cover and neoprene gasket facilitate wire pulling (4)
  • replacement Motor For 1100-7100-7200-7300-W100-W200-W300 Series Time Switches (1)
  • Right Angle (6)
  • Rounded Surface of Bushing (10)
  • Rounded surface of bushing prevents damage to wire insulation (1)
  • Set Screw type transition fitting ideal for commercial and institutional facilities. (2)
  • Single Screw Beam Clamp Insulator (3)
  • Single Screw Connector (1)
  • SPDT Duty Cycle 24 Hour Time Switch With Skip-A-Day Feature (1)
  • Specify Mechanism Only;with Bracket (1)
  • SPST - Off-On - Screw Type Connectors (1)
  • SPST 24 Hour Time Switch - Same Day On-Off Times Each Day (4)
  • Standard Barrel;High Conductivity (2)
  • Standard Screw-On Type Trippers for 1100, 7000, 1800 Series Time Clocks (1)
  • Steel Crimp Sleeves - 100 Pcs Blister (2)
  • suitable for EMT/Rigid/IMC (3)
  • Sunlight Resistant;Connectors Simply Screw Onto Cable;No Tools Required (1)
  • Superior Adhesion and Elasticity, Extreme Weather Performance, Excellent Tensile Strength, Highly Resistant to UV, Abrasion and Corrosion. (11)
  • Tap Size (UNC) 3/8 - 16 (1)
  • Tap Size (UNC) 5/16 - 18 (1)
  • Tapered (NPT) Threads (2)
  • Tapered Threads (NPT) and Furnished Plastic KO Seal Provide "Raintight" Resistance (1)
  • The Dual Internal sealing rings create a raintight seal. (4)
  • Three Selectable Modes (Automatic On/Off, Energy Saving Walk Through, And Test) (2)
  • Two Hole Strap (9)
  • Two Screw Connector (2)
  • UL Type 4 Water Tight (6)
  • Use to compensate plus or minus 2" lateral movement of conduit in dry locations (5)
  • Used in harsh vibration environments (8)
  • Versatile and Reusable Set Screw Connectors made of 6061t-6 Aluminum Alloy;Tin Plated for Low Contact Resistance (15)
  • Vinyl Insulated Locking Spade Terminal 12-10 AWG - 50 Pack (3)
  • Vinyl Insulated Locking Spade Terminal 16-14 AWG - 100 Pack (3)
  • Vinyl Insulated Locking Spade Terminal 22-18 AWG - 100 Pack (1)
  • Vinyl Insulated Ring Terminal 12-10 AWG - 50 Pack (5)
  • Vinyl Insulated Ring Terminal 16-14 AWG - 100 Pack (3)
  • Vinyl Insulated Ring Terminal 22-18 AWG - 100 Pack (4)
  • Vinyl Insulated Ring Terminal 8 AWG - 250 Pack (2)
  • Vinyl Insulated Spade Terminal 12-10 AWG - 50 Pack (3)
  • Vinyl Insulated Spade Terminal 16-14 AWG - 100 Pack (2)
  • Vinyl Insulated Spade Terminal 22-18 AWG - 100 Pack (2)
  • Watertight Fittings designed for indoor and outdoor applications (16)
  • White 30 Minute No Hold in Wall Time Switch (1)
  • White 60 Minute No Hold in Wall Time Switch (1)
  • With Bolt (14)
  • With Bridgeport’s newly redesigned Raintight Compression Couplings, 266-RT through 269-RT, contractors can install just one wet location fitting for either thread less Rigid / IMC or EMT. (2)
  • With Cover (3)
  • Zinc Electro Plated Finish (1)
  • Show More...

• Connection Size

  

  • 1 in (4)
  • 1/2 in (3)
  • 1-1/2 in (2)
  • 1-1/4 in (2)
  • 2 in (2)
  • 2-1/2 in (2)
  • 3 in (2)
  • 3/4 in (3)
  • 4 in (2)
  • Show More...

• Application

  

  • 90 Degree connector for use with metallic liquid tight conduit. (3)
  • 90 Degree connector for use with metallic and nonmetallic "Type B" liquid tight conduit. 1" and up cast zinc. (4)
  • 90 Degree connector for use with metallic and nonmetallic "Type B" liquid tight conduit. 1" and up cast zinc. Insulator rated 105 degree C. (1)
  • 90 Degree connector for use with metallic and nonmetallic "Type B" liquid tight conduit. 3/8" thru 3/4" zinc die cast. Insulator rated 105 degree C. (2)
  • 90 Degree Connector used to connect Flexible Metal Conduit to box enclosure. (2)
  • 90 Degrees connector suitable for use to connect flexible metal conduit to box or enclosure. Insulator rated 105 degrees C. (2)
  • 90 Degrees connector suitable for use to connect flexible metal conduit to box or enclosure. Insulator rated 105 degrees C. Diameter for 1.500" 0 min to 1.625" 0 max. (1)
  • 90 Degrees connector suitable for use to connect flexible metal conduit to box or enclosure. Insulator rated 105 degrees C. 12/2 (.560" 0 min) to 10/3 (.610" 0 max) (1)
  • 90 Degrees connector suitable for use to connect MC/FMC to box or enclosure. Insulator rated 105 degrees C. 1.187" 0 min to 1.312" 0 max (1)
  • 90 Degrees connector suitable for use to connect MC/FMC to box or enclosure. Insulator rated 105 degrees C. Diameter (.75" 0 min) (.875" 0 max) (1)
  • 90 Degrees connector suitable to connect MC/FMC to box or enclosure. Insulator rated 105 degrees C. Diameter (.875" 0 min) to (1.00" 0 max) (1)
  • 90 Degrees fitting with cover for connecting flexible metal conduit to box or enclosure. (2)
  • 90 Degrees fitting with cover used for connecting flexible metal conduit to box or enclosure. (6)
  • 90°Connector Recommended Cable Types Used to Connect Flexible Metal Conduit to Box or Enclosure. Diameter For (.75" 0 Min) to (.875" 0 Max) (1)
  • 90°Connector Suitable For Used to Connect Flexible Metal Conduit to Box or Enclosure (3)
  • 90°Connector Suitable For Used to Connect Mc/Fmc to Box or Enclosure. Diameter: 1.50" 0 Min to 1.625" 0 Max (1)
  • 90°Connector Suitable to Connect Mc/Fmc to Box or Enclosure. Diameter (.875" 0 Min) to (1.00" 0 Max) (1)
  • 90°Connector Suitable to Connect Mc/Fmc to Box or Enclosure. Recommended Cable Types: 1.187" 0 Min to 1.312" 0 Max (1)
  • 90°Fitting with Cover Recommended Cable Types Used For Connecting Flexible Metal Conduit to Box or Enclosure. 14/4 (.45" 0 Min) to 10/4 (.625" 0 Max). Mc/Mci-A (1)
  • 90°Fitting With Cover Used For Connecting Flexible Metal Conduit to Box or Enclosure (2)
  • Allows access to the interior of a conduit system for inspection, pulling and maintenance. (11)
  • Assembles like a regular EMT set screw coupling. To install, simply slide coupling end stop onto fixed end of EMT and tighten screw. Place movable EMT completely into coupling and mark engagement, remove EMT and mark half the distance of engagement, reinstall EMT to half distance. Patented (1)
  • Assembles like a regular EMT set screw coupling. To install, simply slide coupling end stop onto fixed end of EMT and tighten screw. Place movable EMT completely into coupling and mark engagement, remove EMT and mark half the distance of engagement, reinstall EMT to half distance. Patented (4)
  • Assembles like a regular EMT/RIGID/IMC set screw coupling. To install, simply slide coupling end stop onto fixed end of EMT/RIGID/IMC and tighten screw. Place movable EMT/RIGID/IMC completely into coupling and mark engagement, remove EMT/RIGID/IMC and mark half the distance of engagement, reinstall EMT/RIGID/IMC to half distance. (2)
  • Ball type Swivel fixture covers are suitable for mounting pendant or fluorescent lighting fixtures to ceiling box. Maximum 20 degree swing from vertical and 50lb. load. (2)
  • Bridgeport Fittings EZ-Lock 3/4 inch steel connector recommended for cables with an O.D. of .56 - .81 or 10/3 to 6/3 Listed for use with steel and aluminum Flexible Metallic Conduit (FMC) in 1/2 inch trade size. Listed for use with Metal Clad (MC) and A (1)
  • Bridgeport Fittings Mighty-Seal® product line is designed to provide quick and easy raintight connection to EMT raceways. Patented (2)
  • Bridgeport now offers a full line of EMT to FMC/Greenfield Transition Couplings. You no longer need to assemble multiple fittings, or mount a box, to transition between raceways. These couplings provide dimensional flexibility for a raceway system when dropping in to switchgear and transitioning into transformers. Patented (3)
  • Bridgeport’s ASP line of E-Z LOCK® Duplex Snap-in Connectors offers superior installation speed with no tools required. To install, push the cables into the rear of the fitting, insert the fitting into the KO at an angle, and rock up to snap the front end in place. (1)
  • Bridgeport’s ASP line of E-Z LOCK® Duplex Snap-in Connectors offers superior installation speed with no tools required. To install, push the cables into the rear of the fitting, insert the fitting into the KO at an angle, and rock up to snap the front end in place. (3)
  • Bridgeport's LB Conduit Bodies with Integral Raintight Connectors allows access to the interior of a conduit system for inspection, pulling and maintenance, without needing to thread connectors into a conduit body entry. These conduit bodies come with stainless steel screws, an aluminum cover, and a neoprene gasket. (2)
  • Bridgeport's LLR Conduit Bodies are Type LL/LR Combination conduit bodies with Integral Raintight Connectors. These allows access to the interior of a conduit system for inspection, pulling and maintenance, without needing to thread connectors into a conduit body entry. These conduit bodies come with stainless steel screws, an aluminum cover, and a neoprene gasket. (2)
  • Cable Bundling (8)
  • Cable Installation (17)
  • Clamp type entrance cap for rigid conduit and IMC. 3 holes 1 3/4" dia.; 4 holes 1 1/8" dia. (3)
  • Compression style connector with internal sealing ring and knockout gasket to create a raintight seal when connecting EMT to box or enclosure. Insulated Throat - 90° C. Patented (1)
  • Compression style connector with internal sealing ring and knockout gasket to create a raintight seal when connecting EMT to box or enclosure. Patented (7)
  • Compression style connector with internal sealing ring and knockout gasket to create a raintight seal when connecting EMT to box or enclosure. With Bridgeport’s newly redesigned Raintight Compression Connectors, 256-RTI2 thru 259-RTI2, contractors can install just one wet location fitting for either thread less Rigid / IMC or EMT. These 2-1/2” dual Listed Zinc Alloy fittings come standard with a 105° C temperature rated insulated throat and the words “Rigid / EMT and RAINTIGHT” clearly cast into the body. (1)
  • Compression style connector with internal sealing ring and knockout gasket to create a raintight seal when connecting EMT to box or enclosure. With Bridgeport’s newly redesigned Raintight Compression Connectors, 256-RTI2 thru 259-RTI2, contractors can install just one wet location fitting for either thread less Rigid / IMC or EMT. These 3” dual Listed Zinc Alloy fittings come standard with a 105° C temperature rated insulated throat and the words “Rigid / EMT and RAINTIGHT” clearly cast into the body. Thi (1)
  • Compression style coupling used to join two lengths of EMT. Internal sealing rings create a raintight seal. Patented (5)
  • Compression type connectors used to join EMT to box or enclosure. Concrete Tight. Made in the USA (2)
  • Compression type connectors used to join EMT to box or enclosure. Concrete Tight. Made in the USA (4)
  • Compression type steel couplings used to join two lenghts of EMT. Concrete Tight (3)
  • Compression type steel couplings used to join two lenghts of EMT. Concrete Tight (2)
  • Concrete-Tight When Taped. Plastic Insulator Rated 105 Degree C (4)
  • Connector provides watertight seal around underground feeder cable. Tapered (NPT) threads. (2)
  • Converts metallic box rough edged knockout holes to smooth insulated holes for protection of electrical and telecommunications cable. Rated 105 Degrees C. (6)
  • Designed to Operate On Bell Ringing Transformers Or On Batteries (1)
  • Duty Cycling;Irrigation;Laboratory Experiment;Pumping;Process Control;Ventilating Fan (1)
  • Duty Cycling;Ventilating Fans;Pumping;Irrigation;Process Control;Laboratory Experiments (1)
  • Electrical (2)
  • Enclosure (2)
  • E-Z LOCK® AC/MC/MCI-A and FMC Duplex connector, allows for the connection of two AC/MC cables into one 1/2" knockout. It is also suitable for use with steel and aluminum 3/8" trade size Flexible Metallic Conduit (FMC). Recommended cable types: 14/2 - 10/3 diameter: .42 - .61 (1)
  • Flood Lamp-Patio Lamp Decorative Ligting;Flood Lamp;Patio Lamp;Decorative lighting (1)
  • For connecting nonmetallic cable to box or enclosure. (5)
  • For connecting portable cord to box or enclosure. Locknut not required. (1)
  • For creating a Liquidtight/Raintight Connection between 2 different Raceways: 1-1/2" Rigid Conduit (GRC & IMC) and 1-1/2" Liquidtight Flexible Metallic Conduit (LFMC). Suitable for use in wet locations. Concrete Tight (1)
  • For jacketing of high voltage terminations on extruded dielectric cables through 69000 volts. For insulating high temperature silicone insulated cables. A positive oil stop in the construction of transition splices. (1)
  • For use with galvanized, plastic, or cast iron electrical service mast. Fits flats to 40 Degrees. (4)
  • For use with most Metallic or Nonmetallic Electrical Boxes. Non-Conductive Extender/Insulator corrects setbacks up to 1" and insulates devices such as GFCI from Metallic Box. (2)
  • Galvanized Steel Reducing Washers Used in Pairs to Reduce Size of Knockout Holes in Box or Enclosure (22)
  • Galvanized steel reducing washers used in pairs to reduce size of knockout holes in box or enclosure. (9)
  • General Purpose;Electrical;Mechanical;Cable Insulation;Wire Bundling;Reinforcing (2)
  • Grounding Wire (45)
  • Hardware For Lugs (4)
  • Indoor and Outdoor;All Fittings Can Be Used in Chemical and Treatment Plants As Well As for Offshore;Typical Applications Include Wiring of Motors;Transformers;Advanced Machinery;Refrigeration and Tools (6)
  • Industrial (12)
  • Inside/outside box mountable. Connector suitable for use with (1) 8/2, 8/3, 6/2 or 6/3 NM-B cable (1)
  • Insulating (1)
  • Intersystem Bonding of Power and Communication (2)
  • Large Office Areas-Large Meeting Rooms-Classrooms-Bathroom & Storage Spaces (1)
  • Large Office Areas-Large Meeting Rooms-Classrooms-Bathroom and Storage Spaces (1)
  • Lighting;Pump;Sign;Air Conditioning;Water Heater;Fan (7)
  • Mighty-Align® "Slip" Style Coupling - Used to join two lengths of EMT together.Backing out center screw allows the slip coupling to be temporarily located on one cut end while adjacent end is slid into place.Back out center screw stop as necessary to slip coupling over conduit.Fully install center screw stop between conduits.Ensure that both ends of conduit are visible in sight hole.Mighty-Align® "Slip" Style Coupling - Used to join two lengths of EMT together.Backing out center screw allows the slip coupl (1)
  • Mighty-Align® "Slip" Style Coupling - Used to join two lengths of EMT together.Backing out center screw allows the slip coupling to be temporarily located on one cut end while adjacent end is slid into place.Back out center screw stop as necessary to slip coupling over conduit.Fully install center screw stop between conduits.Ensure that both ends of conduit are visible in sight hole.Tighten all set screws. Patented (1)
  • Motor-Equipment Control (6)
  • Nail Type Strap to Support EMT to Mounting Surface (1)
  • Nail type strap to support EMT to mounting surface. (2)
  • Nonmetallic Straight Connectors For Use With Nonmetallic "Type B" Liquid Tight Conduit. PVC Construction with Zinc Locknut. Connectors Simply Screw Onto Cable. No Tools Required (2)
  • NSI (75)
  • One hole strap for steel or Aluminum Tubing or Coaxial cable. (2)
  • Outdoor Signs Display;Lighting Security;System Heating and Air Conditioning (1)
  • Outdoor Signs-Lighting Security-HVAC Control (1)
  • Parking Lot-Building Perimeter Outdoor Signage Lighting (1)
  • Parking Lot-Building Perimeter-Outdoor Signage Lighting (1)
  • Polyethylene "Redheads" prevent damage to wire installation when placed between the wire and armored sheath. Rated 90 degree C. (3)
  • Porch or Patio Lighting;Interior Lighting;Pool;Entryway (1)
  • POWER FUSE, CLASS J TYPE; 5-3/4 INCH; UL 248-8, CSA, QPL-WF-1814, CE APPROVAL; 600 VAC VOLTAGE RATING; 1-1/2 INCH DIAMETER; 200000 AMPERE (SYMMETRICAL) INTERRUPTING RATING; 200 AMPERE CURRENT RATING; BLADE TERMINAL TYPE; FAST ACTING CHARACTERISTICS (2)
  • Prevents Water From Seeping Through Roof-For Use With Copper;Cast Iron;Galvanized;Or Plastic Pipe. Fits Up to 45 Degree Angle. Not Recommended For Hot-Mopped or Built Up Roofs. Neoprene - Elastomer Material. (2)
  • Protects cable running through wood stud, from nails and screws. Great for protecting conductors, cables and raceways. (2)
  • Provides space between conduit and mounting surface. For use with Aluminum straps. (2)
  • Provides space between conduit and mounting surface. For use with Malleable Iron or Aluminum straps. (1)
  • Receptacle for Twist Lock Timers (1)
  • Recommended Cable Types 14/2 to 10/2 .38-.59 Steel or Aluminum AC/MC/MCI-A and 3/8 Steel or Aluminum FMC. Simply Snap Cables into Connector and Snap Assembly into Electrical Box. no Tools Required Integral Internal Spring Steel Locking Tabs Fasten Cable (1)
  • Recommended cable types for use with Steel or Aluminum 14/2 (.38" 0 min) to 10/3 AWG (.61" 0 max) Health Care Facility (HCF) Armored Cable. AC/MC/MCI-A (1)
  • Recommended Cable Types to Connect Armored or Metal Clad Cable to Box or Enclosure. (.44 to .61) 12/2 - 10/4 AC/MC/MCIA/FMC/HCF/HCFMCI-A (1)
  • Recommended Cable Types to Connect Corrugated or Interlocked Mc or Ac Cable to Box or Enclosure. 14/4(.44" 0 Min) to 10/4 (.61" 0 Max) Mci-A. 12/2 to 10/4 Ac/Mc/Mcia/Hcf/Hcfmci-A 3/8" Fmc. 14/2 - 10/3 Nm Cable (1)
  • Recommended Cable Types to Connect Mc & Ac Cable or 3/8 Inch Flexible Metal Conduit to Box or Enclosure. 14/2 (.38" 0 Min) to 10/3 (.61" 0 Max) Mci-A/Hcf/Hcfmcia (1)
  • Recommended Cable Types to Connect Steel Flexible Metal Conduit or Armored Cable to Box or Enclosure. Armored Cable .86"-.92" Dia (1)
  • Recommended Cable Types to Connect Steel or Aluminum Flexible Metal Conduit or Armored Cable to Box or Enclosure. (.56-.61 Dia.) For 12/3 to 10/3 Steel or Aluminum Mc Cable (1)
  • Recommended Cable Types Used to Connect AC/MC/MCI-A, Diameter for 14/2 (0.43 in 0 Min) to 10/3 (0.62 in 0 Max) (1)
  • Recommended Cable Types With Steel or Aluminum 14/2 (0.43" 0 Min) to 10/3 (0.61" 0 Max) AC or MC Cable or 3/8 in Flexible Metal Conduit to Box or Enclosure (1)
  • Recommended Cable Types With Steel Or Aluminum 14/2 to 10/3 Ac Or Mc Cable, Or 3/8" Flexible Metal Conduit to Box Or Enclosure. Diameter For 14/2 (.43" 0 Min) to 10/3 (.61" 0 Max) (1)
  • Red fire alarm box to meet visual identification requirements for fire alarm installations. (2)
  • Reduce strain and sagging of overhead type ACSR Service Entrance Cable. Max load is 1000 lbs. (3)
  • Reduce The Size of Internal Female Threads. 1/2" Thru 2" Steel, 2 1/2" Thru 4" Malleable Iron (15)
  • Replacement Motor (1)
  • Replacement Trippers (1)
  • Residential Interior Lighting-Small Fans and Motors-Appliances (2)
  • Residential;Commercial And Industrial (1)
  • Secure Conduit Perpendicular to Beam or Channel (4)
  • Serves as a short raceway between enclosures when used with a locknut. (1)
  • Set screw connector used to join EMT to box or enclosure. Insulated Throat 105degreeC (3)
  • Set screw type couplings used to join EMT to flexible metal conduit. (2)
  • Set screw type fitting used to join EMT to box or enclosure. Concrete-tight when taped. (1)
  • Set screw type fitting used to join EMT to box or enclosure. Concrete-tight. (6)
  • Set Screw Type Fitting Used to Join EMT to Box or Enclosure. Concrete-Tight when Taped (3)
  • Set screw type fitting used to join EMT to rigid or IMC. Concrete-tight. Furnished with Tri-Drive slot/Phillips/Robertson head screws. (3)
  • Sign;Air Conditioning;Lighting;Sump Pump;Ventilating Fan (2)
  • Simply snap cables into connector and snap assembly into electrical box. (3)
  • Single Screw Beam Clamp Insulator Support With Two Threaded Holes (2)
  • Single screw beam clamp insulator support with two threaded holes. UL listed (3)
  • Snap-On Type Strap Used to Support Round Steel or Aluminum Metal Clad Cable (1)
  • Splicing Wire (40)
  • Steel locknut with PVC seal used to provide raintight seal when fastening threaded conduit to unthreaded opening in a box or enclosure. (9)
  • steel plug used to cap unused knockout holes in box or enclosure. (6)
  • Steel Strap Used to Secure Rigid Conduit and IMC to Mounting Surface (7)
  • Straight connector for use with metallic and non-metallic "Type B" liquid tight conduit. (3)
  • Straight connector for use with metallic and non-metallic "Type B" liquid tight conduit. Insulator rated 105 degree C. (3)
  • Straight connector for use with metallic liquid tight conduit. (1)
  • Straight connector for use with non-metallic "Type B" liquid tight conduit. (7)
  • Straight Set Screw Type Fitting Used to Connect Flexible Metal (steel) Conduit to Box or Enclosure (2)
  • Street-Highway Lighting (4)
  • Support FS Box and Outdoor Lighting Fixture or Similar Devices, per NEC Article 370-23 (1)
  • Telephone;Computer;Single or Multiple Voice Cables;Video or Data Cables (10)
  • Terminate, Splice, Tap Power Connectors (143)
  • Terminate-Splice-Tap (3)
  • The 3000-RT Series are compression type connectors used to join unthreaded steel rigid conduit to box or enclosure in a wet location. (2)
  • The 4357-DC is used to securely join 1" EMT to three (.43" to .61" Diameter) AC/MC/MCI-A/HCF/HCFMCI-A or 3/8" flexible metal conduit. These fittings provide a huge labor savings, compared to the traditional junction box or fitting assembly installation. When using AC/MC/FMC cable simply remove the armor and expose the conductors to the desired length needed to reach the device box or enclosure. The inspection holes will provide a visual end stop for the cable or flex conduit. The use of anti short bushings (1)
  • The 4457-DC is used to securely join 1" EMT to four 14/2 to 10/3 (.43" to .61" Diameter) AC/MC/MCI-A/HCF/HCFMCI-A or 3/8" flexible metal conduit. These fittings provide a huge labor savings, compared to the traditional junction box or fitting assembly installation. When using AC/MC/FMC cable simply remove the armor and expose the conductors to the desired length needed to reach the device box or enclosure. The inspection holes will provide a visual end stop for the cable or flex conduit. The use of anti sh (1)
  • The 630-NM2 allows for multiple nonmetallic cables to be installed into a single 3/4" KO. Simply squeeze the tabsto install or remove the cables. Each port can hold One 10/3 through 14/2 cable; or One Oval 10/2, 12/2 or 14/2; or Two Oval 14/3 or 12/3; or Two Oval 10/2 thru 14/2 NM Cables. Patented. (1)
  • The NMCB-3 is provided with nails for use on wood studs or 3/4" thick furring strips to position non-metallic sheath cable. Capable of positioning up to five 14/2 to 10/3 AC or MC cables or two 14/2 NM cables in each of three rectangular slots. May also be used to be attached to metal studs or enclosures, or concrete block with #6 round head screws. Mounts in either horizontal or vertical direction. Low voltage design and unique dimpled slots prevent accidental removal of cables. (1)
  • The one piece clamp back and strap secures both cable and conduit. The UCS-5075 secures 1/2" and 3/4" EMT, Rigid, IMC, PVC/Polyolefin Coated Rigid, PVC/Polyolefin Coated IMC, Metallic Liquid Tight, Nonmetallic Liquid Tight, FMC, and Schedule 40 and Schedule 80 PVC conduit, as well as .710" 0 to 1.10" 0 steel and aluminum AC/MC cable. (1)
  • The one piece clamp back and strap secures both cable and conduit. The UCS-75100 secures 3/4" and 1" EMT, Rigid, IMC, PVC/Polyolefin Coated Rigid, PVC/Polyolefin Coated IMC, Metallic Liquid Tight, Nonmetallic Liquid Tight, FMC, and Schedule 40 and Schedule 80 PVC conduit, as well as .925" 0 to 1.32" 0 steel and aluminum AC/MC cable. (1)
  • These watertight fittings are designed for both indoor and outdoor applications. All fittings can be used in chemical and treatment plants as well as for offshore applications. Straight connector for use with portable cord provides liquid tight and water tight protection. Typical applications include wiring of motors, transformers, advanced machinery, refrigeration, and tools. (16)
  • Threaded bodies for rigid conduit or IMC allows access for inspection, pulling and maintenance. (18)
  • To secure EMT or rigid conduit to threaded rod, insulator supports, or directly to mounting surface. (4)
  • To secure EMT or rigid conduit to threaded rod, insulator supports, or directly to mounting surface. With Carriage Bolt and Nut. (2)
  • To secure EMT or rigid conduit to threaded rod, insulator supports, or directly to mounting surface. With Carriage Bolt and Nut. (1)
  • To Secure EMT or Rigid Conduit to Threaded Rod. Insulator Supports or Directly to Mounting Surface (2)
  • To Secure EMT or Rigid Conduit to Threaded Rod. Insulator Supports or Directly to Mounting Surface. Available with or Without Bolt (5)
  • To Secure EMT or Rigid Conduit to Threaded Rod. Insulator Supports or Directly to Mounting Surface. Strap Has Integral Threads (6)
  • To Secure EMT or Rigid Conduit to Threaded Rod. Insulator Supports or Directly to Mounting Surface. With Carriage Bolt and Nut (3)
  • To secure threaded rigid service entrance conduit to box or enclosure. Insulated throat rated 105 degree c. UL listed Type 4 - Watertight. Suitable for Aluminum and Steel Rigid Conduit (3)
  • To secure threaded rigid service entrance conduit to box or enclosure. Insulated throat rated 105 degree c. UL listed Type 4 - Watertightnants from entering enclosure. Suitable for Aluminum and Steel Rigid Conduit (1)
  • To secure threaded rigid service entrance conduit to box or enclosure. Insulated throat rated 105 degree c. UL listed. Suitable for Aluminum and Steel Rigid Conduit (1)
  • To Support Rigid Conduit and IMC to Mounting Surface (7)
  • To support rigid conduit and IMC to mounting surface. (8)
  • Type T Combination EMT/Rigid Conduit Body with Cover and Gasket (4)
  • Use with Liquid Tight or Raintight Connectors, or Threaded Conduit (when used with locknuts) (8)
  • Used for Connecting Rigid or IMC to form 90° Bend. Removable Cover and Neoprene Gasket Facilitate Wire Pulling (3)
  • Used in harsh vibration environments to fasten threaded conduit to unthreaded opening in a box or enclosure. (8)
  • Used in place where a grounding bushing and locknut, for bonding connectors inside the box. Perfect for tight locations or fittings with shorter locknut threads. ETL Listed for use with all Bridgeport Fittings connectors. (1)
  • Used in situations where wires have already been pulled through Rigid/IMC conduit, and an insulated bushing is required. Rated 105 Degree C. cULus listed. Patented (4)
  • Used in situations where wires have already been pulled through Rigid/IMC conduit, and an insulated bushing is required. Rated 105 Degree C. cULus listed (3)
  • Used in situations where wires have already been pulled through Rigid/IMC conduit, and an insulated bushing is required. Rated 150 Degree C. cULus listed. Patented. Now featuring UV Stabilized Insulators and Stainless Steel Hardware, perfect for solar and other outdoor installations! (2)
  • Used in situations where wires have already been pulled through Rigid/IMC conduit, and an insulated bushing is required. Grounding lug; aluminum alloy 6061-T6. Rated 150 Degree C. cULus listed. Patented. Now featuring UV Stabilized Insulators and Stainless Steel Hardware, perfect for solar and other outdoor installations! (1)
  • Used in situations where wires have already been pulled through Rigid/IMC conduit, and an insulated bushing is required. Grounding lug; aluminum alloy 6061-T6. Rated 150 Degree C. cULus listed. Patented. Now featuring UV Stabilized Insulators and Stainless Steel Hardware, perfect for solar and other outdoor installations! (2)
  • Used in situations where wires have already been pulled through Rigid/IMC conduit, and an insulated bushing is required. Grounding lug; aluminum alloy 6061-T6. Rated 150 Degree C. cULus listed. Patented. Now featuring UV Stabilized Insulators and Stainless Steel Hardware, perfect for solar and other outdoor installations! (4)
  • Used inside bushing to prevent foreign matter from entering conduit Galvanized steel. (2)
  • Used inside bushing to prevent foreign matter from entering conduit. Galvanized steel. (1)
  • Used to bond one continuous length of grounding conductor to an enclosure thru a 1/2" trade size knockout, inside or outside of an enclosure or panel board and provides 3-equipment bonding terminations. Meets the requirement for Intersystem Bonding. Patented (1)
  • Used to bond one continuous length of grounding conductor to an enclosure thru a 3/4" trade size knockout, inside or outside of an enclosure or panel board and provides 3-equipment bonding terminations. Meets the requirement for Intersystem Bonding. Patented (1)
  • Used to connect 14/2-10/3 (.43" - .61") AC/MC/MCI-A/HCF cable and 3/8" FMC to box or enclosure. Just squeeze to insert into the 1/2" K.O. Use with an anti-short bushing. .375"Throat Opening. Great for lighting whips! Patent Pending (1)
  • Used to connect 2 14/2 - 10/2 (.43" - .59") AC/MC/MCI-A/HCF cables and 3/8" FMC to box or enclosure. No Tools Required Just squeeze to insert into the 1/2" K.O Use with an anti-short bushing. .375" Throat Opening. Great for lighting whips! (1)
  • Used to connect EMT to box or enclosure. Concrete/Raintight. Insulated Throat - 105°C. Patented (1)
  • Used to Connect Flexible Metal Conduit or Armored Cable to Box or Enclosure (4)
  • Used to connect flexible metal conduit or armored cable to box or enclosure. (2)
  • Used to connect flexible metal conduit or armored cable to box or enclosure. Insulator rated 105 degree C. (2)
  • Used to Connect Flexible Metal Conduit to Box or Enclosure (10)
  • Used to connect flexible metal conduit to box or enclosure. (14)
  • Used to connect single round service entrance cable to box or enclosure. (5)
  • Used to Connect Steel Flexible Metal Conduit or XRW FMC to Box or Enclosure (2)
  • Used to connect steel flexible metal conduit or XRW FMC to box or enclosure. Insulator rated 105 degree C. (2)
  • Used to Connect Steel Flexible Metal Conduit to Box or Enclosure (1)
  • Used to connect two lengths of EMT to form a 90degree bend. Removable Aluminum cover to facilitate wire pulling. (2)
  • Used to fasten threaded conduit to unthreaded opening in a box or enclosure. (1)
  • Used to fasten threaded connectors or nipples to box or enclosure. (2)
  • Used to fasten threaded Rigid or IMC Conduit to box or enclosure. (12)
  • Used to join 1/2" EMT and up to two 14/2 and 12/2 Romex, Non-Metallic Cables. Two screw strap type for cable and a set screw type for EMT. (1)
  • Used to join either metallic or non-metallic (Type "B") liquid tight conduit to EMT, Raintight. Concrete-Tight. Patented (4)
  • Used to join either metallic or non-metallic (Type "B") liquid tight conduit to EMT. Raintight. Concrete-Tight. (2)
  • Used to join EMT to box or enclosure. Concrete tight/raintight (1)
  • Used to join EMT to box or enclosure. Concrete/Raintight (3)
  • Used to join EMT to box or enclosure. Concrete/Raintight. Insulated Throat - 105°C. Patented (2)
  • Used to join EMT to box or enclosure. Concrete tight. (20)
  • Used to join EMT to box or enclosure. Concrete tight/Raintight (5)
  • Used to join EMT to box or enclosure. Concrete tight/Raintight. Insulated Throat - 105°C. Patented (6)
  • Used to join EMT to flexible metal conduit. 281-DC is squeeze type for flexible metal conduit. Set screw type for EMT end. (1)
  • Used to Join Emt to Flexible Metal Conduit. Screw-In Type For Flex. Compression Type For EMT (3)
  • Used to join steel EMT to box or enclosure. Concrete-tight. 1/2" thru 2" suitable for use with Steel or Aluminum EMT. (5)
  • Used to join steel EMT to box or enclosure. Concrete-tight. 1/2" thru 2" suitable for use with Steel or Aluminum EMT. Insulator rated 105degree C. (2)
  • Used to join steel EMT to box or enclosure. Concrete-tight. 1/2" thru 4" suitable for use with Steel or Aluminum EMT. (1)
  • Used to join steel EMT to box or enclosure. Concrete-tight. 2 1/2" thru 4" suitable for use with Steel EMT. 2-1/2" through 4" also listed for use with Steel and Aluminum Rigid Conduit. (2)
  • Used to join steel EMT to box or enclosure. Concrete-tight. 2 1/2" thru 4" suitable for use with Steel EMT. 2-1/2" through 4" also listed for use with Steel and Aluminum Rigid Conduit. (2)
  • Used to join steel EMT to box or enclosure. Concrete-tight. 2 1/2" thru 4" suitable for use with Steel EMT. Insulator rated 105°C. 2-1/2" through 4" also listed for use with Steel and Aluminum Rigid Conduit. (3)
  • Used to Join Steel EMT to Box or Enclosure;Concrete-Tight. 1/2 in thru 2 in Suitable for use with Steel or Aluminum EMT;Wet Locations (3)
  • Used to Join Steel EMT to Box or Enclosure;Concrete-Tight. 1/2 in thru 4 in Suitable for use with Steel or Aluminum EMT;Wet Locations (2)
  • Used to join two lengths of EMT, Rigid and IMC. Concrete tight when taped. (4)
  • Used to join two lengths of EMT. Concrete/Raintight. Patented (3)
  • Used to join two lengths of EMT. 1/2" through 1 1/4" Concrete-tight, 1 1/2" thru 4" concrete-tight when taped. 2" thru 4" suitable for use with aluminum or steel EMT. (10)
  • Used to join two lengths of EMT. Concrete tight when taped. (6)
  • Used to join two lengths of EMT. Concrete-tight. (10)
  • Used to join two lengths of EMT. Concrete-tight/Raintight. Patented (6)
  • Used to join two lengths of flexible metal conduit. (3)
  • Used to join two lengths of Steel EMT. Concrete-tight 2" thru 4" suitable for steel and aluminum EMT. 2-1/2" through 4" also listed for use with Steel and Aluminum Rigid Conduit. (1)
  • Used to join two lengths of threaded conduit. (7)
  • Used to offset the axis of raceway 3/4 ". (6)
  • Used to offset the axis of raceway 3/4" between enclosure runs. (2)
  • Used to reduce the size of internal female threads. 1/2" thru 2" steel, 2 1/2" thru 4" malleable iron. (4)
  • Used to seal around boxes, flashings and service entries. Compound is pliable, non-corrosive to metals and can be painted. For both indoor and outdoor use. #1003 asbestos-free duct sealing compound. (2)
  • Used to secure conduit perpendicular to beam or channel. (2)
  • Used to Secure EMT to Box or Enclosure (8)
  • Used to secure EMT to box or enclosure. 1/2" thru 1" concrete-tight, 1-1/4" thru 4" concrete-tight when taped. 2" thru 4" suitable for use with steel or aluminum EMT. Plastic insulator rated 105degreeC. (1)
  • Used to secure EMT to box or enclosure. Insulated Throat 105degreeC (1)
  • Used to secure Rigid/IMC or EMT conduit parallel to beam, channel or angle supports. (2)
  • Used to secure steel EMT to box or enclosure. concrete tight when taped (2)
  • Used to secure steel EMT to box or enclosure. Concrete tight when taped. (3)
  • Used to secure steel EMT to box or enclosure. Concrete-tight when taped. Plastic insulator rated 105 degree C. (6)
  • Used to secure to box or enclosure. (1)
  • Used to secure two lengths of steel EMT. (6)
  • Used to Support EMT to Mounting Surface (12)
  • Used to support EMT to mounting surface. (3)
  • Used to support FS box, outdoor lighting fixture, or similar devices, per NEC article 370-23. (1)
  • Used With Locknut to Terminate Service Conduit to Cabinet (10)
  • Used with locknut to terminate service conduit to cabinet. Lug provided for bonding jumper to neutral busbar. (2)
  • Used with locknut to terminate service conduit to cabinet. Lug provided for bonding jumper to neutral busbar. Grounding lug; aluminum alloy 6061-T6. Plastic metaliner prevents damage to wire insulation. Rated 150 degree C. (4)
  • Used with locknut to terminate threaded rigid and IMC to box, or used with connector to prevent damage to wire insulation. (9)
  • Used with locknut to terminate threaded rigid and IMC to box, or used with connector to prevent damage to wire insulation. Rated 105 degree C. (11)
  • Ventilating Fans;Hvac;Whirlpools;Self Storage;Motors and Pumps (3)
  • Wet Location (23)
  • When Used with a Locknut, Conduit Nipples Serve as a Short Raceway Between Enclosures (9)
  • When used with a locknut, conduit nipples serve as a short raceway between enclosures. (1)
  • Whole House Fan;Indoor/Outdoor Lighting;Bathroom Fan and Light;Self Storage (1)
  • Whole House Fan;Indoor/Outdoor Lighting;Bathroom Fans and Light;Self Storage Control (4)
  • Wire Identification (2)
  • Wire Retainer (3)
  • Wire Spicing (1)
  • Wire Splicing (6)
  • Wire Termination (206)
  • Show More...

• Connection Type

  

  • Clamp-On (9)
  • Combination (7)
  • Compression (9)
  • E-Z Lock(R) (2)
  • FMC (11)
  • Liquidtight (6)
  • Rigid (6)
  • Screw (12)
  • Screw;Strap (11)
  • Screw-In (3)
  • Screw-On (3)
  • Set Screw (14)
  • Single Gang Wall Plate (5)
  • Single Screw Strap-Type (2)
  • Snap-In (4)
  • Snap-On (2)
  • Squeeze (16)
  • Straight (8)
  • Threaded (42)
  • U Shaped (1)
  • Show More...

• Includes

  

  • (2) Screw (11)
  • Clamp (9)
  • NEVERDull(TM) 110 Blade (1)
  • Set Screw (9)
  • Show More...

• Enclosure Type

  

  • Indoor (2)
  • Indoor/Outdoor (8)
  • NEMA FB-1 (14)
  • Show More...

• Thread Length

  

  • 0.552 in (1)
  • 1 in (1)
  • 1/2 in (8)
  • 11/16 in (1)
  • 1-1/16 in (1)
  • 1-1/4 in (1)
  • 1-1/8 in (2)
  • 3/4 in (1)
  • 5/8 in (7)
  • 7/16 in (3)
  • 7/8 in (1)
  • Show More...

• Hub Size

  

  • 0.5 (2)
  • 0.75 (8)
  • 1 (8)
  • 1.25 (5)
  • 1.25 in (1)
  • 1.5 (7)
  • 2 (7)
  • 3/4 in (1)
  • 3/8 in (2)
  • Show More...

• Package Quantity

  

  • 1 CA (2)
  • 1 CA;100 PK (1)
  • 1 ct (31)
  • 1 CT;10 PK (10)
  • 1 CT;100 PK (2)
  • 1 CT;12 PK (16)
  • 1 CT;15 PK (2)
  • 1 CT;2 Pk (2)
  • 1 CT;20 PK (2)
  • 1 CT;25 PK (6)
  • 1 CT;3 PK (2)
  • 1 CT;4 Pk (1)
  • 1 CT;5 PK (9)
  • 1 CT;50 Pk (8)
  • 1 CT;6 Pk (5)
  • 1 PK (1)
  • 10 CT (4)
  • 10 CT;100 PK (7)
  • 10 CT;50 PK (6)
  • 10 CT;60 PK (5)
  • 10 PK (7)
  • 10 PK;1 CT (30)
  • 10 PK;2 CT (11)
  • 100 CA (1)
  • 100 CT (16)
  • 100 CT;1000 PK (6)
  • 100 JR (2)
  • 100 PK (37)
  • 100 PK;1 CT (8)
  • 100 PK;10 CT (7)
  • 100 PK;1000 PK (2)
  • 100 PK;25 CT (2)
  • 1000 CA (6)
  • 1000 PK (9)
  • 1000 PK;100 CT (5)
  • 12 CT (12)
  • 12 PK (3)
  • 12 PK;1 CT (2)
  • 120 PK;20 CT (1)
  • 15 CT (1)
  • 15 CT;19 PK (1)
  • 15 PK;1 CT (2)
  • 150 PK (1)
  • 150 PK;15 CT (1)
  • 1500 PK (1)
  • 2 CT (5)
  • 2 PK (1)
  • 20 CT (2)
  • 20 CT;100 PK (1)
  • 20 CT;120 PK (1)
  • 20 PK (1)
  • 20 PK;1 CT (9)
  • 20 PK;100 PK (1)
  • 200 PK (8)
  • 200 PK;20 CT (1)
  • 200 PK;50 CT (2)
  • 200 STD PK;20 CT (1)
  • 2000 PK;20 CT (1)
  • 20000 DR (1)
  • 24 CT (2)
  • 24 RL/CA (1)
  • 25 CT (21)
  • 25 CT;100 PK (5)
  • 25 CT;250 PK (17)
  • 25 PK (14)
  • 25 PK;1 CT (25)
  • 25 PK;100 PK (1)
  • 250 PK (6)
  • 250 PK;25 CT (14)
  • 2500 CA (1)
  • 2500 PK (1)
  • 3 CT (17)
  • 3 PK (1)
  • 30 PK (1)
  • 30 PK;5 CT (1)
  • 300 JR (2)
  • 4 CT (8)
  • 40 CT (1)
  • 40 PK (4)
  • 40 PK;10 CT (2)
  • 5 CT;200 PK (1)
  • 5 CT;25 PK (4)
  • 5 CT;30 PK (2)
  • 5 PK (1)
  • 5 PK;1 CT (9)
  • 5 PK;25 PK (1)
  • 50 CT (9)
  • 50 CT;200 PK (7)
  • 50 CT;500 PK (8)
  • 50 PK (12)
  • 50 PK;1 CT (8)
  • 500 BG (3)
  • 500 PK (17)
  • 500 PK;100 CT (1)
  • 500 PK;50 CT (7)
  • 500 STD PK;50 CT (3)
  • 5000 CA (1)
  • 5000 CT (1)
  • 6 CT (24)
  • 6 PK (6)
  • 6 PK;1 CT (6)
  • 60 PK;10 CT (1)
  • 6000 CA (1)
  • 7000 PK;50 CT (1)
  • 75 CT (2)
  • 75 PK (1)
  • 8 CT (1)
  • 80 PK (1)
  • Show More...

• Weight

  

  • 0.0001 lb/EA (1)
  • 0.0002 lb/EA (2)
  • 0.0005 lb/EA (4)
  • 0.0006 lb/EA (2)
  • 0.0007 lb/EA (4)
  • 0.0008 lb/EA (1)
  • 0.001 lb/EA (1)
  • 0.0019 lb (1)
  • 0.003 lb/EA (1)
  • 0.005 lb/EA (1)
  • 0.0068 lb/EA (1)
  • 0.0078 lb/EA (1)
  • 0.01 lb (2)
  • 0.012 lb/EA (1)
  • 0.015 lb/EA (1)
  • 0.0167 lb/EA (2)
  • 0.017 lb (1)
  • 0.0183 lb/EA (1)
  • 0.0187 lb (1)
  • 0.0189 lb/EA (1)
  • 0.019 lb/EA (1)
  • 0.02 lb/EA (9)
  • 0.0204 lb/EA (1)
  • 0.0216 lb/EA (1)
  • 0.0223 lb/EA (1)
  • 0.0234 lb (2)
  • 0.0282 lb/EA (1)
  • 0.0294 lb (1)
  • 0.03 lb (3)
  • 0.03 lb/EA (4)
  • 0.0362 lb (1)
  • 0.04 lb (1)
  • 0.04 lb/EA (3)
  • 0.0475 lb/EA (1)
  • 0.05 lb/EA (3)
  • 0.051 lb/EA (1)
  • 0.0513 lb/EA (1)
  • 0.052 lb/EA (1)
  • 0.0523 lb/EA (1)
  • 0.055 lb/EA (1)
  • 0.0566 lb (1)
  • 0.0579 lb/EA (1)
  • 0.06 lb/EA (5)
  • 0.062 lb/EA (2)
  • 0.066 lb/EA (1)
  • 0.068 lb/EA (2)
  • 0.0696 lb/EA (1)
  • 0.07 lb (1)
  • 0.07 lb/EA (2)
  • 0.075 lb/EA (2)
  • 0.078 lb/EA (1)
  • 0.0795 lb/EA (1)
  • 0.08 lb/EA (11)
  • 0.0839 lb/EA (2)
  • 0.085 lb (3)
  • 0.085 lb/EA (1)
  • 0.09 lb (1)
  • 0.0900 lb (1)
  • 0.094 lb/EA (1)
  • 0.0984 lb/EA (1)
  • 0.1 lb (1)
  • 0.1 lb/EA (3)
  • 0.1016 lb/EA (1)
  • 0.11 lb (1)
  • 0.11 lb/EA (1)
  • 0.112 lb/EA (1)
  • 0.117 lb/EA (1)
  • 0.12 lb (1)
  • 0.12 lb/EA (3)
  • 0.1200 lb (2)
  • 0.1289 lb/EA (1)
  • 0.13 lb (2)
  • 0.13 lb/EA (5)
  • 0.1328 lb/EA (1)
  • 0.133 lb/EA (1)
  • 0.137 lb/EA (2)
  • 0.138 lb/EA (2)
  • 0.14 lb (1)
  • 0.14 lb/EA (5)
  • 0.144 lb/EA (1)
  • 0.145 lb (1)
  • 0.15 lb (1)
  • 0.15 lb/EA (2)
  • 0.152 lb/EA (1)
  • 0.16 lb/EA (2)
  • 0.17 lb (3)
  • 0.17 lb/EA (3)
  • 0.175 lb/EA (1)
  • 0.185 lb/EA (1)
  • 0.1864 lb/EA (1)
  • 0.19 lb (2)
  • 0.19 lb/EA (5)
  • 0.193 lb/EA (2)
  • 0.1990 lb/EA (1)
  • 0.2 lb (4)
  • 0.2 lb/EA (6)
  • 0.2000 lb (2)
  • 0.208 lb/EA (1)
  • 0.21 lb (2)
  • 0.21 lb/EA (1)
  • 0.22 lb/EA (2)
  • 0.221 lb/EA (1)
  • 0.23 lb/EA (2)
  • 0.232 lb/EA (1)
  • 0.24 lb/EA (3)
  • 0.2400 lb/EA (1)
  • 0.25 lb (1)
  • 0.26 lb (3)
  • 0.26 lb/EA (3)
  • 0.267 lb/EA (1)
  • 0.2689 lb/EA (1)
  • 0.27 lb/EA (2)
  • 0.276 lb/EA (1)
  • 0.2779 lb/EA (1)
  • 0.28 lb (2)
  • 0.28 lb/EA (3)
  • 0.286 lb/EA (1)
  • 0.29 lb/EA (1)
  • 0.2920 lb/EA (1)
  • 0.3 lb (1)
  • 0.3 lb/EA (3)
  • 0.304 lb/EA (1)
  • 0.31 lb (3)
  • 0.31 lb/EA (2)
  • 0.32 lb/EA (1)
  • 0.3200 lb (2)
  • 0.34 lb (2)
  • 0.34 lb/EA (2)
  • 0.35 lb/EA (1)
  • 0.355 lb/EA (1)
  • 0.36 lb/EA (3)
  • 0.38 lb (1)
  • 0.38 lb/EA (2)
  • 0.39 lb (2)
  • 0.39 lb/EA (3)
  • 0.4 lb (9)
  • 0.4 lb/EA (2)
  • 0.404 lb/EA (1)
  • 0.405 lb/EA (1)
  • 0.408 lb/EA (1)
  • 0.41 lb/EA (2)
  • 0.42 lb (1)
  • 0.4217 lb/EA (1)
  • 0.428 lb/EA (1)
  • 0.44 lb (1)
  • 0.45 lb (2)
  • 0.46 lb (2)
  • 0.46 lb/EA (1)
  • 0.48 lb/EA (1)
  • 0.49 lb (2)
  • 0.49 lb/EA (2)
  • 0.5 lb/EA (2)
  • 0.5000 lb/EA (1)
  • 0.52 lb/EA (4)
  • 0.5240 lb/EA (1)
  • 0.53 lb/EA (2)
  • 0.533 lb/EA (2)
  • 0.54 lb (1)
  • 0.55 lb (2)
  • 0.55 lb/EA (1)
  • 0.56 lb (1)
  • 0.564 lb/EA (1)
  • 0.5717 lb/EA (2)
  • 0.58 lb (1)
  • 0.58 lb/EA (1)
  • 0.59 lb/EA (2)
  • 0.6 lb (2)
  • 0.6 lb/EA (2)
  • 0.62 lb (1)
  • 0.62 lb/EA (2)
  • 0.635 lb/EA (1)
  • 0.64 lb (1)
  • 0.66 lb/EA (2)
  • 0.664 lb/EA (1)
  • 0.7 lb/EA (1)
  • 0.72 lb (1)
  • 0.76 lb/EA (2)
  • 0.768 lb/EA (1)
  • 0.77 lb/EA (1)
  • 0.79 lb (1)
  • 0.79 lb/EA (1)
  • 0.8 lb/EA (2)
  • 0.81 lb/EA (1)
  • 0.82 lb/EA (1)
  • 0.87 lb/EA (2)
  • 1 lb (3)
  • 1 lb/EA (6)
  • 1.01 lb (1)
  • 1.01 lb/EA (1)
  • 1.03 lb (1)
  • 1.0499 lb (1)
  • 1.0499 lb/EA (2)
  • 1.1239 lb/EA (1)
  • 1.17 lb (1)
  • 1.2 lb (1)
  • 1.2 lb/EA (2)
  • 1.23 lb (1)
  • 1.2839 lb (1)
  • 1.3 lb (1)
  • 1.308 lb/EA (2)
  • 1.3099 lb/EA (1)
  • 1.34 lb (1)
  • 1.36 lb (1)
  • 1.36 lb/EA (1)
  • 1.4799 lb/EA (1)
  • 1.48 lb (2)
  • 1.49 lb (1)
  • 1.499 lb/EA (1)
  • 1.57 lb (1)
  • 1.57 lb/EA (1)
  • 1.67 lb/EA (1)
  • 1.68 lb (1)
  • 1.7 lb (1)
  • 1.76 lb (1)
  • 1.87 lb/EA (1)
  • 1.93 lb (1)
  • 1.9599 lb/EA (1)
  • 1.97 lb/EA (1)
  • 10.3 oz (1)
  • 11.0 lb (2)
  • 12 lb/EA (2)
  • 12.0 lb (1)
  • 149.12 lb (1)
  • 2 lb (4)
  • 2 lb/EA (2)
  • 2.02 lb (1)
  • 2.05 lb (1)
  • 2.11 lb (1)
  • 2.11 lb/EA (1)
  • 2.2 lb/EA (1)
  • 2.27 lb (1)
  • 2.4 lb (2)
  • 2.5 lb/EA (1)
  • 2.56 lb (1)
  • 2.76 lb/EA (1)
  • 2.7999 lb/EA (1)
  • 21 lb/EA (1)
  • 3 lb/EA (1)
  • 3.15 lb (1)
  • 3.48 lb (1)
  • 3.54 lb/EA (1)
  • 3.73 lb (1)
  • 3.8 lb (1)
  • 3.9 lb (2)
  • 4.5 lb/EA (1)
  • 45 lb/EA (1)
  • 5 lb/EA (1)
  • 6 lb/EA (2)
  • 6.1 oz (1)
  • 9.0 lb (1)
  • Show More...

• Knockout Size

  

  • 0.370 in (2)
  • 1 in (1)
  • 1/2 in (2)
  • 1-1/2 in (1)
  • 1-1/4 in (2)
  • 19/32 in (1)
  • 2 in (1)
  • 3/4 in (2)
  • 3/8 in (2)
  • Show More...

• Voltage Rating

  

  • 1000 V (8)
  • 105 to 130 V ac (1)
  • 105-305 (2)
  • 120 to 277 V ac (4)
  • 120 to 480 V ac (1)
  • 120 V (5)
  • 120 V ac (5)
  • 120 V ac @ 60 Hz (2)
  • 120 VAC (3)
  • 120/208/240/277 V ac (1)
  • 125 to 277 V (1)
  • 125 V (1)
  • 125 V ac;250 V ac (1)
  • 125/250/277 V ac (7)
  • 125-250 VAC (5)
  • 208 to 277 V (4)
  • 208 to 277 V ac (1)
  • 208 to 277 V ac @ 60 Hz (1)
  • 24 V dc (1)
  • 277 V (1)
  • 277 V ac (1)
  • 300 (4)
  • 300 V (43)
  • 300V (1)
  • 35 (1)
  • 480 V ac (1)
  • 480/120 V ac @ 60 Hz (1)
  • 600 (34)
  • 600 V (337)
  • 600 V to 35 KV (1)
  • 600V (6)
  • Show More...

• Thread Size

  

  • 0.5 (1)
  • 1/2 in - 13 (1)
  • Show More...

• Height

  

  • .411 (3)
  • .562 (1)
  • .598 (1)
  • .650 (1)
  • .697 (2)
  • .778 (2)
  • .866 (1)
  • .969 (1)
  • 0.453 in (5)
  • 0.6875 in (1)
  • 0.718 in (1)
  • 0.75 in (1)
  • 1.04 (1)
  • 1.07 (1)
  • 1.13 (2)
  • 1.205 (1)
  • 1.375 in (1)
  • 1.472 (1)
  • 1.57 (1)
  • 1.94 in (1)
  • 1/2 in (4)
  • 10 (1)
  • 11/16 in (1)
  • 1-1/16 in (1)
  • 1-1/2 (1)
  • 1-1/8 (1)
  • 1-11/16 in (1)
  • 1-15/16 in (1)
  • 13/16 in (1)
  • 1-3/4 in (2)
  • 1-3/8 in (3)
  • 1-5/16 in (1)
  • 1-5/8 in (1)
  • 2 in (4)
  • 2.125 (1)
  • 2.13 in (1)
  • 2.187 in (1)
  • 2.25 in (1)
  • 2.81 in (1)
  • 2-1/16 in (1)
  • 2-1/4 in (1)
  • 2-1/8 in (1)
  • 2-7/16 in (1)
  • 2-7/32 in (1)
  • 2-7/8 in (1)
  • 2-9/16 in (1)
  • 3.31 in (1)
  • 3.56 in (1)
  • 3/4 in (9)
  • 3/8 in (2)
  • 3-1/2 in (1)
  • 3-1/8 in (1)
  • 3-3/4 in (1)
  • 3-5/16 in (1)
  • 4.56 in (1)
  • 4-1/2 in (2)
  • 5/8 in (2)
  • 7.250 in (1)
  • 7/8 in (5)
  • 9 (1)
  • 9/16 in (1)
  • Show More...

• Made In Usa

  

  • no (1)
  • yes (487)
  • Show More...

• Number Of Holes

  

  • 1 (53)
  • 1;2;3 (2)
  • 1;3 (1)
  • 2 (30)
  • 2;3 (3)
  • 3;4 (2)
  • 4 (1)
  • Show More...

• Cable Size

  

  • # 1 AWG (STR) (4)
  • # 2 AWG (STR) (7)
  • # 3 AWG (STR) (3)
  • # 4 AWG (STR) (6)
  • # 6 AWG (STR) (8)
  • # 8 AWG (STR) (4)
  • #14 to 1/0 AWG (7)
  • #14 to 4 AWG (3)
  • #3/0,#4/0 (1)
  • #4 AWG (1)
  • .250 (1)
  • .375 (1)
  • 1/0 AWG (STR) (6)
  • 1/0 AWG-250 MCM (2)
  • 1-1/4 to 3 in (2)
  • 12/4, 10/2, 10/3 (1)
  • 14/2 to 10/3 (3)
  • 14/2 to 8/3 With Ground (1)
  • 14/2, 12/2 (1)
  • 14/3 To 8/3 (1)
  • 14/3, 12/3 (1)
  • 14-2 AWG (1)
  • 14-2/0 AWG (1)
  • 2/0 AWG (STR) (5)
  • 2-4/0 AWG (1)
  • 250 MCM (STR) (5)
  • 250-500 MCM (1)
  • 2-6(ACSR) - 1 STR-6 SOL(Aluminum) (1)
  • 3/0 AWG (STR) (6)
  • 3/0-4 AWG (1)
  • 300 MCM (STR) (2)
  • 350 MCM (STR) (5)
  • 4/0 AWG (STR) (5)
  • 4/0-14 AWG (2)
  • 400 MCM (STR) (2)
  • 500 MCM (STR) (6)
  • 600 MCM (STR) (2)
  • 6-1/0 AWG (1)
  • 750 MCM (STR) (3)
  • 8-2 AWG (1)
  • 8-2/0 AWG (1)
  • EMT: 1-1/4 in (1)
  • Rigid: 1 in;EMT: 1 in (1)
  • Rigid: 1/2 in;EMT: 1/2 in (1)
  • Rigid: 1-1/2 in (1)
  • Rigid: 1-1/4 in;EMT: 1-1/2 in (1)
  • Rigid: 2 in;EMT: 2 in (1)
  • Rigid: 2-1/2 in;EMT: 2-1/2 in (1)
  • Rigid: 3 in;EMT: 3 in (1)
  • Rigid: 3/4 in;EMT: 3/4 in (1)
  • Rigid: 3-1/2 in;EMT: 3-1/2 in (1)
  • Rigid: 4 in;EMT: 4 in (1)
  • Show More...

• Number Of Conductors

  

  • 1 (76)
  • 1 Cable (18)
  • 10 (2)
  • 12 (2)
  • 2 (96)
  • 3 (23)
  • 4 (15)
  • 5 (7)
  • 6 (8)
  • 8 (4)
  • up to 6 max (1)
  • Show More...

• Overall Length

  

  • 0.5 in (1)
  • 0.625 in (1)
  • 0.787 in (1)
  • 0.854 in (1)
  • 0.866 in (1)
  • 1 in (2)
  • 1.06 in (1)
  • 1.07 in (1)
  • 1.12 in (2)
  • 1.125 in (1)
  • 1.13 in (1)
  • 1.153 in (2)
  • 1.16 in (1)
  • 1.161 in (1)
  • 1.201 in (1)
  • 1.250 in (1)
  • 1.252 in (1)
  • 1.350 in (1)
  • 1.47 in (4)
  • 1.496 in (1)
  • 1.5 in (2)
  • 1.50 in (1)
  • 1.54 in (1)
  • 1.55 in (1)
  • 1.574 in (1)
  • 1.584 in (1)
  • 1.594 in (1)
  • 1.6 in (1)
  • 1.62 in (2)
  • 1.752 in (2)
  • 1.772 in (1)
  • 1.84 in (2)
  • 1.85 in (1)
  • 1.875 in (1)
  • 1.913 in (2)
  • 1.95 in (1)
  • 1-1/2 in (Stud) (1)
  • 1-1/4 in (Stud) (1)
  • 1-1/8 in (Stud) (1)
  • 12 in (1)
  • 14 in;356 mm (1)
  • 2 in (1)
  • 2.071 in (1)
  • 2.106 in (1)
  • 2.12 in (1)
  • 2.209 in (1)
  • 2.25 in (2)
  • 2.252 in (1)
  • 2.27 in (1)
  • 2.28 in (4)
  • 2.281 in (1)
  • 2.283 in (1)
  • 2.362 in (1)
  • 2.47 in (1)
  • 2.551 in (1)
  • 2.56 in (1)
  • 2.63 in (2)
  • 2.66 in (1)
  • 2.677 in (2)
  • 2.75 in (1)
  • 2.795 in (1)
  • 2.81 in (1)
  • 2.88 in (1)
  • 2.9 in (4)
  • 2.93 in (1)
  • 22 (1)
  • 2-3/8 in (1)
  • 3 in (1)
  • 3.03 in (1)
  • 3.13 in (1)
  • 3.18 in (2)
  • 3.25 in (1)
  • 3.41 in (1)
  • 3.52 in (1)
  • 3.6 in (2)
  • 3.76 in (1)
  • 3.8 in (1)
  • 3.880 in (1)
  • 4 in (5)
  • 4.01 in (1)
  • 4.094 in (1)
  • 4.229 in (1)
  • 4.5 in (1)
  • 4.57 in (1)
  • 4.62 in (1)
  • 4.65 in (1)
  • 4.66 in (1)
  • 5 in (2)
  • 5 in (Connector);8 in (Sleeve) (1)
  • 5.05 in (1)
  • 5.24 in (1)
  • 5.25 in (1)
  • 5.5 in (7)
  • 5.52 in (1)
  • 5.75 in (1)
  • 5.79 in (1)
  • 5.83 in (1)
  • 5-1/16 in (1)
  • 6 in (Sleeve) (1)
  • 6.35 in (1)
  • 6.38 in (2)
  • 6.5 in (1)
  • 7.52 in (1)
  • 8 in (1)
  • 8.3 in (1)
  • 8.83 in (1)
  • 9.060 in (1)
  • 9.23 in (1)
  • Show More...

• Mounting Type

  

  • Bracket Mount (1)
  • Conduit Mount (7)
  • Door Mount (1)
  • Flush Mount (8)
  • No (2)
  • Screw Mount (5)
  • Screw Mount;Nail Tab Mount (2)
  • Twist Lock Mount (1)
  • Show More...

• Overall Width

  

  • 0.161 in (2)
  • 0.197 in (2)
  • 0.236 in (1)
  • 0.339 in (2)
  • 0.63 in (1)
  • 0.65 in (3)
  • 0.669 in (1)
  • 0.67 in (1)
  • 0.714 in (1)
  • 0.717 in (2)
  • 0.720 in (2)
  • 0.75 in (2)
  • 0.784 in (1)
  • 0.795 in (1)
  • 0.828 in (1)
  • 0.906 in (4)
  • 0.97 in (1)
  • 1.04 in (4)
  • 1.25 in (1)
  • 1.260 in (1)
  • 1.71 in (4)
  • 2.375 in (1)
  • 2.9 in (7)
  • 3-1/16 in (1)
  • 3-7/8 in;99 mm (1)
  • 4.625 in (1)
  • Show More...

• Overall Height

  

  • 0.50 in (1)
  • 0.697 in (2)
  • 0.866 in (2)
  • 0.969 in (1)
  • 1.016 in (2)
  • 1.043 in (2)
  • 1.134 in (1)
  • 1.142 in (2)
  • 1.252 in (4)
  • 1.382 in (1)
  • 1.385 in (1)
  • 1.4 in (3)
  • 1.575 in (1)
  • 1.69 in (2)
  • 1.761 in (1)
  • 2.132 in (1)
  • 2.34 in (4)
  • 2.62 in (4)
  • 2.93 in (1)
  • 3.25 in (7)
  • 3.75 in (1)
  • 3.875 in (1)
  • 4 in (1)
  • 8.25 in (1)
  • 8-5/16 in (1)
  • Show More...

• Terminal Type

  

  • Compression (8)
  • Push-In (3)
  • Screw (24)
  • Split (9)
  • Twist-On (7)
  • Winged (10)
  • Show More...

• Maximum Voltage Rating

  

  • 1000 V (4)
  • 300 V (2)
  • 35 kV (5)
  • 600 V (89)
  • 600 V ac (22)
  • Show More...

• Number Of Gangs

  

  • 1 (1)
  • 2 (2)
  • Show More...

• Poles

  

  • 1 (215)
  • 2 (7)
  • 3 (2)
  • 600 V (1)
  • Show More...

• Category Description

  

  • 1PH MANUAL STARTERS (4)
  • ADHESIVES (3)
  • ANCHORS & ANCHOR KITS (1)
  • BEAM, RA, EDGE, & PARALLEL CLAMPS (15)
  • CABLE & PIPE TRANSITS (1)
  • Commercial dimmers, motion sensors, & photo cells (10)
  • Comp & Mech Lugs and Butt Splices (157)
  • CONDUIT HANGERS/STAND OFF STRAPS (20)
  • CONTROL TRANSFORMERS (1)
  • CORD CONNECTORS & CORD GRIPS (75)
  • COUPLINGS, ADAPTERS, REDUCERS, BUSHINGS, & CAPS (46)
  • Datacom Wiring Devices and Accessories (3)
  • DECORATIVE RESIDENTIAL (1)
  • DIECAST EMT FITTINGS (101)
  • DIECAST OFFSET & CHASE NIPPLES (18)
  • ELECTRONIC BALLAST (1)
  • EMT ELBOWS (2)
  • EMT STRAPS (15)
  • EXOTHERMIC GROUNDING PRODUCTS (3)
  • FLEX & MC FITTINGS (98)
  • FLEX & MC STRAPS (4)
  • FORM 5 CONDULETS, COVERS, & GASKETS (37)
  • FORM 7, 8, CONDULETS, COVERS, & GASKETS (13)
  • Form 9 condulets, covers & gaskets (1)
  • Fuses & Fuse Accessories (12)
  • HAND TOOLS (12)
  • Incandescent (Except Residential) (1)
  • Locknuts, Bushings, Re-Bushings, Re-Washers, Threaded Plugs, Knockout Plugs (126)
  • METALLIC FITTINGS (39)
  • Motors (1)
  • NON-METALLIC FITTINGS (14)
  • PLASTIC BOXES (2)
  • Poles & Accessories (2)
  • Portable Cords, Voice, Data, Video Wire & Cable (1)
  • PUSHBUTTONS & CHIMES (1)
  • PVC BOXES (1)
  • Residential cord connectors (1)
  • Residential dimmers, motion sensors, controls, & photo cells (13)
  • RIGID COUPLINGS (8)
  • RIGID ELBOWS (4)
  • RIGID STRAPS & CLAMPBACKS (30)
  • ROMEX CONNECTORS (11)
  • Screws, Bolts, Staples, Jack Chains, Washers & TY-Raps (80)
  • SECURITY & FIRE ALARM SYSTEMS (1)
  • SENSORS (1)
  • SERVICE ENTRANCE FITTINGS: Weatherheads & Grounding Fittings & Ground Rods (75)
  • SIGNALING EQUIPMENT (4)
  • SLB'S & JAKE ELL'S (6)
  • SPLICE KITS (15)
  • SPLIT BOLTS (112)
  • STANDARD DUTY PUSHBUTTONS (10250H-) (1)
  • STEEL BOXES & COVERS (8)
  • STEEL EMT FITTINGS (118)
  • STRUT STRAPS (1)
  • T&B C TAP LUGS (14)
  • TAPE (46)
  • TERMINAL BLOCK ACESSORIES (1)
  • TERMINAL BLOCKS POWER DIST BLOCKS (32)
  • TERMINALS (101)
  • TIME CLOCKS (34)
  • TIMERS (6)
  • TOGGLE SWITCHES (5)
  • TRANSFORMER ACCESSORIES (1)
  • Watertight Hub, 3-PIECE COUPLINGS, THREADLESS COUPLINGS AND THREADLESS CONNECTOR (17)
  • WIRE LUBE, MARKERS, & TIES (2)
  • WIRE NUTS (37)
  • Show More...

• Temperature Rating

  

  • 105 (2)
  • 105 C (26)
  • 105 Degree C (7)
  • 105?°C (51)
  • 150?° (9)
  • 150?°C (27)
  • -40 F to 250 F (2)
  • -40F to 185F (36)
  • 75 C (5)
  • 90 (13)
  • 90 C (173)
  • 90?°C (14)
  • 90c (1)
  • B7613 (1)
  • no rating (2)
  • Recommended usage 25deg. F to 120 deg. F (2)
  • Up to 2 Hours (1)
  • Show More...

• Wire Type

  

  • 2 Conductor Cable (1)
  • 2 Conductor With Ground (1)
  • 3 Conductor With Ground (1)
  • Al/Cu (4)
  • B,C,D,K,M,I (12)
  • Class A & B (32)
  • Class B & C (83)
  • COPPER (16)
  • CU Wire Only (23)
  • Show More...

• Minimum Qty

  

  • 100 (83)
  • 1000 (7)
  • 15 (3)
  • 20000 (1)
  • 25 (4)
  • 250 (1)
  • 30 (1)
  • 30000 (1)
  • 35000 (1)
  • 40 (3)
  • 50 (42)
  • 500 (7)
  • Show More...

• Connector Type

  

  • AL/CU (1)
  • CAT5/5E Connector (1)
  • CAT6 Connector (1)
  • Color-Coded (1)
  • Combination (17)
  • Compression (85)
  • Duplex (1)
  • E-Z Lock® (4)
  • FMC (31)
  • Jacketed MC/TECK (2)
  • Liquidtight (14)
  • LiquidTight, Insulated (3)
  • Made in USA Compression (6)
  • Nonmetallic (1)
  • Nonmetallic, Screw-on (1)
  • PUSH-EMT® (10)
  • Raintight Compression (10)
  • Screw-In (8)
  • Screw-In, Insulated (6)
  • SET SCREW (60)
  • Single Screw Strap-Type, Insulated (1)
  • Single Screw, Strap Type (2)
  • Snap (2)
  • Squeeze (22)
  • Squeeze, Insulated (9)
  • Steel Raintight/Concrete-Tight Insulated (10)
  • STRAIGHT (12)
  • Straight Nonmetallic (9)
  • Straight, Insulated (3)
  • Three-piece Conduit (7)
  • TRANSITION (3)
  • Two Screw Strap Type (1)
  • Two Screw, Strap Type (5)
  • Two-Screw, Strap Type (12)
  • U Shaped (2)
  • U Shaped, Insulated (1)
  • Show More...

• Type

  

  • 24 Hour In Wall Time Switch (1)
  • 24 Hour Time Switch (9)
  • 24 Hour Time Switch - 1 Or 2 Channel (2)
  • 7 Day Astronomic Time Switch - 1 Or 2 Channel (2)
  • 7 Day Time Switch - 1 Or 2 Channel (2)
  • Adaptor Plate (1)
  • Aluminum Double Lug (5)
  • Aluminum Ground Clamp (3)
  • Aluminum Lay-In Lug (4)
  • Aluminum Single Lug (3)
  • Aluminum Split Bolts (4)
  • Aluminum Stacked Lug (1)
  • Armored Wire Adaptor (1)
  • Astronomic In Wall Timer (2)
  • Bi-Metallic Pin (3)
  • BOX CONNECTOR (1)
  • Box Supports (2)
  • Box Vaportite (1)
  • BUSHING (86)
  • Cable Stacker (1)
  • Cable Support (1)
  • Chime Kit (1)
  • Clamp Backs (3)
  • Clamp Straps (2)
  • Closed End Connectors (1)
  • COMBINATION (4)
  • Combination Pails (1)
  • Concrete Slab Elbow (1)
  • Conduit Clamps (10)
  • Conduit Hangers (17)
  • Conduit Hangers with Bolt and Nut (6)
  • Conduit Nipple (10)
  • Conduit Nipples (1)
  • CONNECTOR (279)
  • Connectors (11)
  • Copper Butt Splice Kit (1)
  • Copper C Taps (3)
  • Copper Single Lug (1)
  • Copper Split Bolts (11)
  • Copper Terminal Lug (1)
  • Cord Grips (12)
  • COUPLING (112)
  • Covers (3)
  • Crimp Sleeve Wire Connectors (3)
  • Crimp Tools (2)
  • C-Taps (5)
  • Delayed Response Utility Grade (2)
  • Die Cast Zinc Photocontrol (1)
  • Digital Auto Off In Wall Time Switch (1)
  • DIN RAIL (1)
  • Direct Burial Splice Kit With Heat Shrink (2)
  • Double Primary (6)
  • Double Row (1)
  • Double Screw (1)
  • Double Sided Entry (32)
  • Double Sided Entry With Mounting Holes (4)
  • Double Snap (2)
  • Duplex E-Z LOCK® Snap-In MC Connector (2)
  • Electric Door Switches (1)
  • Electronic Auto Off In Wall Time Switch (1)
  • EMT Nail Strap (3)
  • EMT Pull Elbows (2)
  • Entrance Caps (10)
  • Extra Heavy Duty Direct Burial Ground Clamp (1)
  • E-Z LOCK (3)
  • F Connectors (1)
  • Gel Tap Splice Kits With Connector (2)
  • GENERAL PURPOSE (12)
  • Green Grounding Clip (1)
  • Green Grounding Screw (1)
  • Ground Hub Swing Type (3)
  • Ground Rod Clamps Heavy Duty (1)
  • Ground Rod Clamps Range Taking (1)
  • Ground Rod Clamps Standard Duty (3)
  • Grounding Pigtails (2)
  • Heavy Duty Bronze Ground Clamps (8)
  • Heavy Duty Direct Burial Ground Clamp (3)
  • Heavy Duty Direct Burial Lay-In Lug (6)
  • Heavy Duty Drill Screw (1)
  • Heavy Duty Ground Connector For Parrallel Copper Cables (3)
  • Heavy Duty Ground Connector For Three Parrallel Copper Cables (1)
  • Heavy Duty Ground Connector For Two Parrallel Copper Cables (1)
  • IN LINE (2)
  • In-Line Gel Splice Kit (1)
  • IN-Line Splicer/Reducer (8)
  • Instant Response Turn Lock Photocontrol (1)
  • INSULATED (2)
  • Insulated Duplex E-Z LOCK® Snap-In MC Connector (2)
  • Insulation Piercing Connectors (3)
  • Insulator Support Beam Clamp (1)
  • Insulator Support Beam Clamps (4)
  • Intersystem Bonding Bridge (3)
  • Intersystem Bonding Connector (2)
  • Isolated Ground Bars (1)
  • Knockout Plugs (6)
  • Lay-In Ground Lug Direct Burial (1)
  • LB (2)
  • Lexan Swivel Photocontrol (1)
  • Liquidtight Sealing Ring (8)
  • LL/LR (2)
  • Locknuts (34)
  • Long Barrel - CU Splice (10)
  • Long Barrel - One Hole (27)
  • Long Barrel - One Hole With Peep Hole (1)
  • Long Barrel - Two Hole (19)
  • Male / Female Adaptor (1)
  • Mast Kit (1)
  • MECHANICAL HORN (1)
  • Miniterm Kit (1)
  • Mogul Conduit Bodies (1)
  • Multi Cable (14)
  • NAIL PLATE (2)
  • Natural (1)
  • Natural Cable Tie Mount (1)
  • Natural-Mountable (2)
  • NEMA 3 Metal Indoor-Outdoor Enclosure (1)
  • NEMA 3R Noryl Indoor-Outdoor Enclosure (1)
  • Non-Insulated Female Flag Terminal (1)
  • Non-Insulated Ring Terminal (7)
  • Non-Metallic Cable Splices And Taps (3)
  • Nylon Fully Insulated Female Disconnect (3)
  • Nylon Fully Insulated Male Disconnect (2)
  • Nylon Insulated Butt Connectors (3)
  • Nylon Insulated Female Disconnect (2)
  • Nylon Insulated Locking Spade Terminal (1)
  • Nylon Insulated Ring Terminal (3)
  • Nylon Insulated Spade Terminal (2)
  • Offset Entry (3)
  • Offset Nipple (8)
  • Offset Pin (7)
  • One Hole EMT Strap (6)
  • One Hole Pipe Strap (15)
  • One Hole Service Entrance Strap (1)
  • One Hole Strap (1)
  • One Hole Straps (2)
  • Oxide Inhibitor (1)
  • Panelboard Lug (3)
  • PIR Ceiling Mount Occupancy Sensor (2)
  • Pliers (1)
  • POWER PACK (1)
  • Premium (11)
  • Protective (1)
  • PULL CHAIN (1)
  • Pull Elbows (4)
  • Punchdown Tools (3)
  • Push In Wire Connectors (3)
  • Push On Gel Stub Splice Kit (1)
  • Rain Tight Compression Connector (1)
  • Raintight (2)
  • Raintight Compression (4)
  • Rebar Clamp (2)
  • Red Fire Alarm (3)
  • Red/Yellow (2)
  • Reducing Washer (7)
  • Reducing Washers (25)
  • Replacement Motor (1)
  • Replacement Sleeves (3)
  • RJ45 Boots (1)
  • Roll-On Splice Kits (2)
  • Roof Flashings (6)
  • Round or Octagonal (1)
  • ROUND VIBRATING GONG (1)
  • Rubber Cover For Toggle Switches (1)
  • Rubber Splicing Tape (1)
  • S Hook (1)
  • Screw Port Plug (1)
  • Sealing Compound (2)
  • Select Purpose (10)
  • Service Entrance LB (6)
  • Service Post Connectors (8)
  • Servie Entrance Sleeves (1)
  • Set Screw Slip (2)
  • Short Barrel - CU Splice (13)
  • Short Barrel - One Hole (16)
  • Short Barrel - Two Hole (1)
  • Shorting Cap (1)
  • Shrink Tube Butt Connector (1)
  • Silicon Bronze Bolt (1)
  • Silicon Bronze Flat Washer (1)
  • Silicon Bronze Hex Nut (1)
  • Silicone Bronze Split Lockwashers (1)
  • Silicone Rubber (1)
  • Single Barrel, Cut In Double-Snap (1)
  • Single Barrel, Double-Snap (1)
  • SINGLE GANG (1)
  • Single Primary (5)
  • Single Primary (Line), Single Secondary (Load) (2)
  • Single Screw Strap Type (1)
  • Single Sided Entry (22)
  • Snap-In "U" Shaped, Strapped (1)
  • Solid Pin (10)
  • Spiral Wrap (3)
  • Splicer/Reducer (7)
  • Splicer-Reducers (1)
  • SPLIT (11)
  • Spring Wound In Wall Time Switch (7)
  • Spring Wound In Wall Time Switch (1)
  • Spring Wound In Wall Time Switch-Commercial Grade (1)
  • SQUARE (1)
  • Stainless Steel (2)
  • Standard Barrel - ALCU Splice (7)
  • Standard Barrel - One Hole (4)
  • Standard Barrel - Two Hole (10)
  • Standard Wire Connectors (9)
  • Steel Cord Grips (10)
  • Straight Nonmetallic (1)
  • Strain Relief (1)
  • Straps (2)
  • Submersible Pedestal Connectors (9)
  • Switch Box Support (1)
  • Tan/Red (2)
  • Testers (1)
  • Threaded Hubs (6)
  • Tin Plated Copper Split Bolt (9)
  • TOGGLE SWITCH (2)
  • Transformer (1)
  • Transformer Lug Kit (2)
  • Transition (6)
  • Trippers (1)
  • Two Hole Pipe Strap (16)
  • Type C (5)
  • Type LB (1)
  • Type LB Set Screw (6)
  • Type LL (5)
  • Type LR (5)
  • TYPE T (1)
  • UF Cable Splice Kit (1)
  • UF Connectors (2)
  • Universal Straps (1)
  • Utility Grade Electronic With Fail On Mode (1)
  • UV Black (2)
  • Vinyl Insulated Butt Connectors (3)
  • Vinyl Insulated Female Disconnect (3)
  • Vinyl Insulated Locking Spade Terminal (7)
  • Vinyl Insulated Male Disconnect (2)
  • Vinyl Insulated Pin Terminal (1)
  • Vinyl Insulated Ring Terminal (14)
  • Vinyl Insulated Spade Terminal (8)
  • Voltage Markers (1)
  • Wedge Clamps (1)
  • Wedge Grip Clamps (3)
  • Wide Range Tap Connectors (6)
  • Winged Wire Connectors (10)
  • Wire Holder (2)
  • Wire Marker Books (2)
  • Wire Strippers (3)
  • Wrap Around Gel Splice Kits (2)
  • Wrap Around UF Splice Kit (1)
  • Zero Cross Turn Lock (1)
  • Zinc Diecast Ground Clamps (1)
  • Show More...

• Mounting

  

  • # 10 Mounting Hole (1)
  • .114 Mounting Holes (1)
  • .142 Mounting Holes (1)
  • .225 Mounting Holes (1)
  • 1.1 cm Oval Mounting Hole (1)
  • 1/2 Mounting Hole (14)
  • 1/2 Mounting Holes (24)
  • 1/2 Mountng Holes (1)
  • 1/4 Mounting Hole (8)
  • 1/4 Mounting Holes (4)
  • 1/4 Mountinng Hole (1)
  • 2 Mounting Holes (18)
  • 3/8 Mountign Hole (1)
  • 3/8 Mounting Hole (17)
  • 3/8 Mounting Holes (1)
  • 5/16 Mounting Hole (4)
  • 5/8 Mounting Hole (2)
  • Box Mount (1)
  • Bracket Mount (1)
  • Ceiling mount (2)
  • Clamp (3)
  • Conduit Mount (9)
  • Data Plate mounting bracket (Old Work) (1)
  • Flush Mount (2)
  • Indoor-Outdoor Box (1)
  • Mounts flush against structure. (6)
  • Mounts in either horizontal or vertical direction. (1)
  • No (2)
  • plastic and metal back boxes (1)
  • Screw Mount (33)
  • Screw or Nail fastening (2)
  • Screw or nail Tab (3)
  • Self Adhesive (1)
  • Self Stick (1)
  • Single Gang Wall Plate (12)
  • Slotted cover holes for nails or screws (2)
  • Slotted Holes in Base, 35mm DIN Rail w/Locking Feature (2)
  • Snap Mount (2)
  • TURN LOCK (1)
  • TWIST LOCK (4)
  • Twist-Lock (1)
  • UL (Canada and US) (1)
  • Show More...

• Wire Size

  

  • (1) 1000-250 MCM(Line) - (6) 2/0-14 AWG(Load) (1)
  • (1) 2/0-14 AWG(LINE) - (1) 2/0-14 AWG(LOAD) (1)
  • (1) 2/0-14 AWG(Line) - (4) 4-14 AWG(Load) (2)
  • (1) 2/0-14 AWG(Line) - (6) 4-14 AWG(Load) (1)
  • (1) 2-14 AWG(Line) - (1) 2-14 AWG(Load) (1)
  • (1) 250 MCM-6 AWGG(Line) - (1) 250 MCM-6 AWG(Load) (1)
  • (1) 350 MCM-6 AWG(Line) - (1) 350 MCM-6 AWG(Load) (1)
  • (1) 350 MCM-6 AWG(Line) - (12) 4-14 AWG(Load) (1)
  • (1) 350 MCM-6 AWG(Line) - (6) 2/0-14 AWG(Load) (1)
  • (1) 350 MCM-6 AWG(Line) - (6) 4-14 AWG(Load) (1)
  • (1) 500 MCM-4 AWG(Line) - (1) 500 MCM-4 AWG(Load) (1)
  • (1) 500 MCM-4 AWG(Line) - (4) 4/0-6 AWG(Load) (1)
  • (1) 500 MCM-4 AWG(Line) - (6) 2/0-14 AWG(Load) (1)
  • (2) 2/0-14 AWG(Line) - (12) 4-14 AWG(Load) (1)
  • (2) 2/0-14 AWG(Line) - (2) 2/0-14 AWG(Load) (1)
  • (2) 2/0-14 AWG(Line) - (6) 2-14 AWG(Load) (1)
  • (2) 2/0-14 AWG(Line) - (6) 4-14 AWG(Load) (2)
  • (2) 350 MCM-6 AWG(Line) - (2) 350 MCM-6 AWG(Load) (1)
  • (2) 350 MCM-6 AWG(Line) - (6) 2/0-14 AWG(Load) (1)
  • (2) 500 MCM-4 AWG(Line) - (2) 500 MCM-4 AWG(Load) (2)
  • (2) 500 MCM-4 AWG(LINE) - (4) 4/0-6 AWG(LOAD) (1)
  • (2) 500 MCM-4 AWG(Line) - (6) 2/0-14 AWG(Load) (1)
  • (Class B,C,D) 1-10 AWG - (Class K,M,I) 2-10 AWG (3)
  • (Class B,C,D) 3/0-4 AWG - (Class K,M,I) 2/0-2 AWG (3)
  • (Class B,C,D) 6-14 AWG - (Class K,M,I) 6-14 AWG (3)
  • 1 SOL - 2/0 STR (1)
  • 1 SOL - 4/0 STR (1)
  • 1/0 STR - 250 MCM (2)
  • 1/0-14 AWG (9)
  • 1/0-8 AWG (1)
  • 10 SOL - 2 STR (1)
  • 10 SOL - 6 SOL (1)
  • 10 STR - 6 STR (1)
  • 12-10 AWG (1)
  • 12-10 AWG (24)
  • 12-14 AWG (3)
  • 14 STR - 8 STR (1)
  • 14-8 AWG (1)
  • 16 STR - 8 STR (1)
  • 16-10 AWG (3)
  • 16-14 AWG (16)
  • 18-10 AWG (1)
  • 2 SOL - 2 STR (1)
  • 2 SOL - 2/0 STR (2)
  • 2 SOL - 3/0 STR (1)
  • 2/0 STR - 350 MCM (1)
  • 2/0-14 AWG (5)
  • 22-10 AWG (1)
  • 22-10 AWG (30 Amp) - 18-14 AWG (20 Amp) (1)
  • 22-12 AWG (20 Amp) - 20-18 AWG (10 Amp) (1)
  • 22-14 AWG (2)
  • 22-18 AWG (14)
  • 22-18, 16-14, 12-10 AWG (1)
  • 250 - 500 MCM (1)
  • 250 MCM-6 AWG (13)
  • 3/0 SOL - 4/0 STR (1)
  • 3/0 STR - 350 MCM (1)
  • 3/0 STR - 500 MCM (1)
  • 3/0-6 AWG (13)
  • 350 MCM-12 AWG (4)
  • 350 MCM-6 AWG (10)
  • 4 SOL - 1/0 STR (2)
  • 4 STR - 2 STR (1)
  • 4 STR - 3/0 STR (1)
  • 4 to 14 AWG (1)
  • 4/0 STR - 350 MCM (1)
  • 4-14 AWG (8)
  • 500 (1)
  • 500 MCM-4 AWG (11)
  • 6 AWG (3)
  • 6 SOL - 1/0 STR (2)
  • 6 SOL - 2 SOL (1)
  • 6 SOL - 2 STR (1)
  • 6 STR - 2/0 SOL (1)
  • 6 STR - 4/0 SOL (1)
  • 600 MCM-6 AWG (5)
  • 750-250 MCM (7)
  • 78181040872 (1)
  • 8 AWG (5)
  • 8 SOL - 1/0 STR (1)
  • 8 SOL - 2 STR (1)
  • 8 SOL - 4 SOL (1)
  • Main 2 ACSR 1-2 STR - Tap 2 ACSR 1-2 STR (1)
  • Show More...