2417MFW - Wiremold

Inside 90 Degree Angle Turns. Fog White

25DTC412 - Wiremold

Two-Compartment Pole. Nominal Material Thickness .040" (1.0MM). Ivory Boot Base. Furnished Unwired Without Outlets. Mounting Hardware, Entrance End Plate and Ceiling Trim Plates Furnished. Length: 12' 5" (3.8M).

25DTC412WH - Wiremold

Tele Power Pole Blank Steel White 12FT.Dimensions: 141.00 X 2.30 X 2.25

25DTC4WH - Wiremold

Tele Power Pole Blank Steel White 10FT.Dimensions: 117.00 X 2.30 X 2.25

25DTPE10WH - Wiremold

WM 25DTP-E10WH Tele-Power Express P

2600WC - Wiremold

For Holding The Conductors In Place. Finish - Galvanized Steel.

30TP4WH - Wiremold

WM 30TP-4WH TPP 2-20A DPLX 10FT. WH

500B - Wiremold

Blank Faceplate For All Four-Piece Fittings. Note: Four-Piece Service Fittings Include: Housing and Base Plate. Receptacles Included When Indicated In Part Number Description. 525 Series Service Fittings Have 27 Cubic Inches (442ML) Of Capacity.

500T - Wiremold

1" (25MM) I.D. Grommeted Opening. Note: Four-Piece Service Fittings Include: Housing and Base Plate. Receptacles Included When Indicated In Part Number Description. 525 Series Service Fittings Have 27 Cubic Inches (442ML) Of Capacity.

5400TB - Wiremold

Two Equal Compartments - Base Accepts Single or Twin Snap Cover. 5400 Series Raceway Is Available In 8' (2.4M) Lengths With Pre-Punched Mounting Holes, Packed 48' (14.6M) Per Carton. Ivory

5400TC - Wiremold

Use With 5400TB Series Raceway In Twin Snap Applications. Order Cover For Each Compartment. Available In 8' (2.44M) Lengths. Ivory

5406A - Wiremold

For Covering Joint Where Two Pieces Of 5400C Raceway Cover Come Together. Ivory

656 - Wiremold

For Removing Cover Of 1500 and 2600 Series Overfloor Raceways.

6ATC2PSB - Wiremold

Recessed Prewired Surface Style Poke-Thru Assembly – Designed to Be Installed In A Concrete Floor Which Has Access In The Ceiling Of The Floor Below For Running Power, Data and A/V Services. Poke-Thru Device Installs Into A 6" (152MM) to A 6 1/8" (155MM) Diameter Hole. The Unit Comes Complete With A Surface Style Cover and Two (2) Prewired, Pre-Installed Duplex Receptacles That Are Recessed 4" (102MM) Below The Floor Surface Level. Surface Style Cover Is An Aluminum Cover That Is Designed to Sit On Top Of

AL20GBA606TR - Wiremold

BK160010 - Wiremold

10' Nonmetallic Pancake Overfloor Raceway. Accepts Up to 3/4" Cable Diameter. Black

EFB45CTCBK - Wiremold

Evo 4 and 5 Gang Floor Box Surface Cover WTH Insert Black

G2000BC - Wiremold

Packed Ten 5' (1.5M) Lengths Per Carton. Gray

G4017 - Wiremold

90 Degree Internal Corners. Fiber Bushing Included. Gray

RFB60G - Wiremold

For Use In Either Concrete or Wood Floors. Fully Adjustable With Tunnel Compartment. Supplied With Two (2) Duplex Mounting Plates, Two (2) Communication Mounting Plates (RFB62A), and (2) Blank Mounting Plates. Other Plates Sold Separately.