Narrow By:

• Manufacturer: AppletonOz

• Product Type

  

  • 1 1/2 FM7 Cover Stamped-Alum (1)
  • 1 1/2 FM 7 Body (1)
  • 1 1/2 FM7 Body (4)
  • 1 1/2 FM7 Body (A) (1)
  • 1 1/2 FM7 Body (A) (1)
  • 1 1/2 FM7 Body Type C -Alum (1)
  • 1 1/2 FM7 Body Type LB-Alum (1)
  • 1 1/2 FM7 Body Type LL-Alum (1)
  • 1 1/2 FM7 Body Type LR-Alum (1)
  • 1 1/2 FM7 Body Type T -Alum (1)
  • 1 1/2 Form 35 Type T THR (1)
  • 1 1/4 FM7 Cover Stamped-Alum (1)
  • 1 1/4 FM7 Body (7)
  • 1 1/4 FM7 Body Type C -Alum (1)
  • 1 1/4 FM7 Body Type LL-Alum (1)
  • 1 1/4 FM7 Body Type LR-Alum (1)
  • 1 1/4 FM7 Body Type T -Alum (1)
  • 1 1/4 FORM35 Type LB Threa (1)
  • 1 1/4 Type LB Form 85 Uni (A) (1)
  • 1 Cover For Form 35 Unilet (1)
  • 1 Eys Sealing Unilet-Female (1)
  • 1 FM7 Body Type C -Alum (1)
  • 1 FM7 Body Type LB-Alum (1)
  • 1 FM7 Body Type LL-Alum (1)
  • 1 FM7 Body Type LR-Alum (1)
  • 1 FM7 Body Type TB-Alum (1)
  • 1 Form 85 Unilet (A) (1)
  • 1 Form 85 Unilet (A) (1)
  • 1 Form 85 Unilet-Type TB (1)
  • 1 G R Uni Inside Threads T (1)
  • 1 GR Unilet (1)
  • 1 GR Unli With Surface Covr (1)
  • 1 In Alum Cond Bdy CVR (1)
  • 1 In Exp Proof Sealing FTG (1)
  • 1 In FM7 Body (6)
  • 1 In FM7 Cover Alum (1)
  • 1 In Form 35 Unilet (1)
  • 1 In GR Unilet (1)
  • 1 In LR Iron Cond Bdy (1)
  • 1 In THD Alum LC Bdy CVR GSKT (1)
  • 1 In THD Alum LL Bdy CVR GSKT (1)
  • 1 In THD Alum LR Bdy CVR GSKT (1)
  • 1 Male Drain Seal (1)
  • 1 Male Seal-Off (1)
  • 1 Mogul Unilet Type C (1)
  • 1 Threaded Unilet (1)
  • 1 Unilet Type FD 1-Gang (2)
  • 1 Unilet Type FD-1 Gang (1)
  • 1 Unilet Type FD-2 Gang (1)
  • 1/2 FM7 Cover Sand-Cast Al (1)
  • 1/2 Unilet (1)
  • 1/2 FM7 Body (5)
  • 1/2 FM7 Body Type C - Alum (1)
  • 1/2 FM7 Body Type LB- Alum (1)
  • 1/2 FM7 Body Type LL- Alum (1)
  • 1/2 FM7 Body Type LR- Alum (1)
  • 1/2 FM7 Body Type TB- Alum (1)
  • 1/2 Form 35 TB Threaded Unilet (1)
  • 1/2 Form 35 Type T THR (1)
  • 1/2 Form 35 Unilet (1)
  • 1/2 Form 35 Unilet (A) (1)
  • 1/2 Form 85 Unilet (1)
  • 1/2 Form 85 Unilet (A) (1)
  • 1/2 GR Unil W/Ins Thread (1)
  • 1/2 GR Unilet (2)
  • 1/2 In Alum Cond Bdy CVR (1)
  • 1/2 In THD Alum LL Bdy CVR (1)
  • 1/2 STL FM7 Cover Assy (1)
  • 1/2 Type FS Thread Unilet (1)
  • 1/2 Type FSC Thread Unilet (1)
  • 1-1/2 Form 85 Unilet (1)
  • 1-1/2 In Form 35 Unilet (1)
  • 1-1/2 Male Seal-Off (1)
  • 1-1/2 STL FM7 Cover Assy (1)
  • 1-1/2 THD Alum LC Bdy CVR GSKT (1)
  • 1-1/2 THD Alum LL Bdy CVR GSKT (1)
  • 1-1/2 THD Alum LR Bdy CVR GSKT (1)
  • 1-1/2 THD Alum TC Bdy CVR GSKT (1)
  • 1-1/2 Uni Inside Thread/Sur (1)
  • 1-1/4 FM7 Body Type LB-Alum (1)
  • 1-1/4 Form 35 Type T THR (1)
  • 1-1/4 In Vert Sealing Fitting (1)
  • 1-1/4 Male Seal-Off (1)
  • 1-1/4 STL FM7 Cover Assy (1)
  • 1-1/4 THD Alum LC Bdy CVR GSKT (1)
  • 1-1/4 THD Alum LL Bdy CVR GSKT (1)
  • 1-1/4 THD Alum LR Bdy CVR GSKT (1)
  • 1-1/4 THD Alum TC Bdy CVR GSKT (1)
  • 1-1/4&1-1/2 Alum Cond Bdy CVR (1)
  • 1-1/4&1-1/2 Cover For Form 35 (1)
  • 1-Gang Duplex Receptacle Cover (1)
  • 2 FM7 Cover Stamped-Alum (1)
  • 2 1/2 -3 FM 7 Cover Assem (1)
  • 2 1/2 Form 85 LB Alum (1)
  • 2 1/2-3 FM7 Cover Stamped-Alum (1)
  • 2 Cover For Form 35 Unilet (1)
  • 2 FM7 Body (6)
  • 2 FM7 Body (A) (1)
  • 2 FM7 Body Type C -Alum (1)
  • 2 FM7 Body Type LB-Alum (1)
  • 2 FM7 Body Type LL-Alum (1)
  • 2 FM7 Body Type LR-Alum (1)
  • 2 FM7 Body Type T -Alum (1)
  • 2 FM7 Cover Assembly (1)
  • 2 Form 35 Type T THR U (1)
  • 2 Gang Unilet Alum Cover (1)
  • 2 In Alum Cond Bdy CVR (1)
  • 2 In Form 35 Unilet (1)
  • 2 In THD Alum LC Bdy CVR GSKT (1)
  • 2 In THD Alum LL Bdy CVR GSKT (1)
  • 2 In THD Alum TC Bdy CVR GSKT (1)
  • 2 Male Seal-Off (1)
  • 2 Type LB Form 35 THR U (1)
  • 2 Type LB Form 85 Unilet (1)
  • 2 Unilet (1)
  • 2-1/2 & 3 Cover For Form 35 (1)
  • 2-1/2 THD Alum LB Bdy CVR GSKT (1)
  • 2GANG Alum Stamped Cover (1)
  • 2-Gang Thick Wall FD Unilet (1)
  • 3 FM7 Body Type LB-Alum (1)
  • 3/4 FM7 Cover Sand-Cast Al (1)
  • 3/4 FM 7 Cover Assembly (1)
  • 3/4 FM7 Body (1)
  • 3/4 FM7 Body Type C - Alum (1)
  • 3/4 FM7 Body Type LL- Alum (1)
  • 3/4 FM7 Body Type LR- Alum (1)
  • 3/4 FM7 Body Type TB- Alum (1)
  • 3/4 Form 35 Type LL THR (1)
  • 3/4 Form 35 Type LR THR (1)
  • 3/4 GR Unilet Type C (1)
  • 3/4 GR Unilet W/Internal (1)
  • 3/4 GRL Unilet (1)
  • 3/4 Grssa Aluminum Unilet (1)
  • 3/4 LL FM7 Body (App) (1)
  • 3/4 LR FM7 Body (App) (1)
  • 3/4 TB FM7 Body (App) (1)
  • 3/4 Threaded Unilet 2-Gang (1)
  • 3/4 Type FD Thread Unilet (1)
  • 3/4 Type FDC Thread Unilet (1)
  • 3/4 Type GRJS Expl Proof (1)
  • 3/4 Unilet Body (1)
  • 3/4 Unilet GR (1)
  • 3/4 Unilet Type FD-1 Gang (2)
  • 3/4 X FM7 Body (App) (1)
  • 3-1/2 & 4 Cover For Form 35 (1)
  • 3-1/2 In Iron Cond Body Type T (1)
  • 3-1/2 STL FM7 Cover Assembly (1)
  • 3-1/2 THD Alum LB Bdy CVR GSKT (1)
  • 4 FM7 Aluminum Body (2)
  • 4 In THD Alum LB Bdy CVR GSKT (1)
  • APP170 Alum Cov W/Fip GKT (1)
  • APP270 Alum Cov W/Fip GKT (1)
  • APP370 Alum Cov W/Fip GKT (1)
  • APP470 Alum Cov W/Fip GKT (1)
  • APP570 Alum Cov W/Fip GKT (1)
  • APP670 Alum Cov W/Fip GKT (1)
  • Cast Cover SQ HNDL TGL SW (1)
  • Cast Dev Box SGL Gang 1 In Hub (2)
  • Cast Dev Box SGL Gang 3/4 In (1)
  • Conduit Body (3)
  • Conduit Outlet Body (31)
  • Conduit Outlet Body Cover (4)
  • Conduit Outlet Box (1)
  • Conduit Seal Body (5)
  • Cover (5)
  • Cover FS + FD / Gang (1)
  • Cover FS + FD Steel 2-Gang (1)
  • Cover Vapor Proof 1 Gang Flat (1)
  • Device Box (3)
  • FM7 Body Type T -Alum (1)
  • FM7 Cover Gasket 1/2 (1)
  • FS Single Gang Unilet Alum (1)
  • Sealing Fit'G Exp-Proof 1/2 (1)
  • Single Gang Alum Cover (2)
  • Single Gang Blank Alum Cover (1)
  • Single Gang Steel Cover (1)
  • Single Gang Threaded Unilet (2)
  • Stamped Cover (3)
  • Threaded 2 Gang Unilet (1)
  • Threaded Unilet (4)
  • Threaded Unilet (A) (1)
  • Threaded Unilet 1 (2)
  • Threaded Unilet 1 Gang (1)
  • Threaded Unilet 3/4 (1)
  • Uni Form 35 11/2 Thread (A) (1)
  • Unilet 1 Threaded (1)
  • Unilet 3/4 THRD 3 Gang (1)
  • Unilet 3/4 Threaded 2 Gang (1)
  • Unilet Form 35 1 1/4 Threaded (1)
  • Unilet Form 35 1 In Threaded (1)
  • Unilet Form 35 1 Threaded (2)
  • Unilet Form 35 1/2 In Threaded (1)
  • Unilet Form 35 1/2 THR (1)
  • Unilet Form 35 1/2 THR (A) (1)
  • Unilet Form 35 11/2 THR (1)
  • Unilet Form 35 1-1/4 In (2)
  • Unilet Form 35 2 In Threaded (1)
  • Unilet Form 35 2 Thread (1)
  • Unilet Form 35 3/4 In Threaded (1)
  • Vaporproof Cover (1)
  • Vaporproof Cover SGL Gang (1)
  • Wet Loc Cover-Duplex Recept(A) (1)
  • Show More...

• Brand

  

  • Appleton (275)
  • Appleton/Oz Gedney (3)
  • O-Z/GEDNEY (7)
  • Show More...

• Finish

  

  • Epoxy Powder Coat (60)
  • Epoxy Powder Coat;Other (7)
  • Epoxy Powder Coated (23)
  • Epoxy Powder Coated Dichromate Zinc Electro-Plated (2)
  • Natural (9)
  • Natural Aluminum (15)
  • Powder Coated (1)
  • Triple-Coat (Zinc Electroplate, Chromate And Epoxy Powder Coat) (84)
  • Zinc Electroplate (6)
  • Zinc Electroplated (17)
  • Zinc Electroplated Chromate Epoxy Powder Coated (2)
  • Zinc Electro-Plated Chromate Epoxy Powder Coated (2)
  • Zinc Electroplated With Aluminum Enamel (1)
  • Zinc Electro-Plated;Dichromate;Epoxy Powder Coated (1)
  • Show More...

• Trade Size

  

  • 1 in (9)
  • 1/2 in (8)
  • 1-1/2 in (2)
  • 1-1/4 in (1)
  • 1-1/4 in;1-1/2 in (1)
  • 2 in (4)
  • 3 in (1)
  • 3/4 in (20)
  • 4 (1)
  • Show More...

• Shape

  

  • C (1)
  • LB (4)
  • Round (1)
  • Shallow (2)
  • T (3)
  • TB (2)
  • Show More...

• Connection Type

  

  • 3/4 in Connector (1)
  • Female (3)
  • Female Threaded (2)
  • Male x Female (2)
  • Threaded (22)
  • Show More...

• Number Of Hubs

  

  • 1 (2)
  • 2 (6)
  • 3 (6)
  • Show More...

• Hub Size

  

  • 0.75 in;19.1 mm (1)
  • 1 (37)
  • 1/2 (27)
  • 1/2 in (6)
  • 1/4 (1)
  • 1-1/2 (26)
  • 1-1/2 in (1)
  • 1-1/4 (23)
  • 1-1/4 - 1-1/2 (3)
  • 1-1/4 in (1)
  • 2 (33)
  • 2 in (2)
  • 2-1/2 (1)
  • 2-1/2 - 3 (3)
  • 3 (2)
  • 3 in (1)
  • 3/4 (17)
  • 3/4 in (19)
  • 3-1/2 (1)
  • 3-1/2 - 4 (2)
  • Show More...

• Capacity

  

  • 10 cu.in (1)
  • 12.20 cu.in;0.2 dm^3 (2)
  • 18 cu.in (2)
  • 18/0.29 cu.in/dm^3 (1)
  • 183.50 cu.in;3.0 dm^3 (1)
  • 29 cu.in (1)
  • 32.30 cu.in;0.5 dm^3 (1)
  • 33.80 cu.in;0.6 dm^3 (1)
  • 4.30 cu.in;0.1 dm^3 (1)
  • 4.35 cu.in;0.1 dm^3 (3)
  • 69.70 cu.in;1.1 dm^3 (1)
  • 7 cu.in (1)
  • 7.30 cu.in;0.1 dm^3 (4)
  • 7.33 cu.in;0.1 dm^3 (1)
  • 71.20 cu.in;1.2 dm^3 (1)
  • Show More...

• Length

  

  • 10.19 (1)
  • 10.2 (3)
  • 10.20 in;259.1 mm (2)
  • 10.56 (3)
  • 10.71 (4)
  • 10-1/2 (1)
  • 11.63 (1)
  • 13.14 (1)
  • 13.14 in;333.8 mm (1)
  • 13.69 (1)
  • 2 in (1)
  • 3.5 in (1)
  • 3.63 in (1)
  • 3.69 in;93.7 mm (2)
  • 3.75 in;95.3 mm (1)
  • 4.25 in (1)
  • 4.31 (1)
  • 4.4 (1)
  • 4.40 in;111.8 mm (2)
  • 4.56 (6)
  • 4.63 (3)
  • 4.82 in;122.4 mm (2)
  • 4-3/4 (1)
  • 5.07 in;128.8 mm (2)
  • 5.17 in;131.3 mm (1)
  • 5.19 (6)
  • 5.38 (7)
  • 5.5 (1)
  • 5.50 in;139.7 mm (1)
  • 5.63 (4)
  • 5.79 in;147.1 mm (1)
  • 5.94 (2)
  • 6 (9)
  • 6.06 in (2)
  • 6.44 (1)
  • 6.44 in;163.6 mm (1)
  • 6.69 (2)
  • 6-1/2 (6)
  • 6-1/4 (10)
  • 7 (2)
  • 7.13 (8)
  • 7.13 in (1)
  • 7.44 (6)
  • 7.79 (1)
  • 7.79 in;197.9 mm (1)
  • 7.81 in;198.4 mm (1)
  • 7.87 (2)
  • 7.88 (1)
  • 7-1/4 (5)
  • 8.13 (6)
  • 8.19 (12)
  • 8.45 (3)
  • 8.56 (1)
  • 9.19 (7)
  • 9.81 (1)
  • Show More...

• Width

  

  • 1.25 in;31.7 mm (1)
  • 1.31 (2)
  • 1.31 in;33.3 mm (2)
  • 1.38 (2)
  • 1.38 in (2)
  • 1.5 in;38.1 mm (1)
  • 1.53 in;38.9 mm (2)
  • 1.56 (3)
  • 1.56 in (2)
  • 1.74 (1)
  • 1.74 in;44.2 mm (1)
  • 1.75 in (1)
  • 1.81 (3)
  • 1.88 (2)
  • 1-3/4 (2)
  • 2 (4)
  • 2.06 (2)
  • 2.06 in;52.3 mm (3)
  • 2.19 (5)
  • 2.26 in;57.4 mm (1)
  • 2.38 (1)
  • 2.44 (9)
  • 2.49 (2)
  • 2.49 in;63.2 mm (2)
  • 2.56 (2)
  • 2.63 (2)
  • 2.68 (2)
  • 2.68 in;68.1 mm (1)
  • 2.69 (1)
  • 2.79 (1)
  • 2.81 in (2)
  • 2.88 (1)
  • 2-1/2 (2)
  • 2-1/4 (4)
  • 2-3/4 (4)
  • 3 (5)
  • 3.1 (2)
  • 3.10 in;78.7 mm (1)
  • 3.13 (1)
  • 3.19 (6)
  • 3.31 (1)
  • 3.38 (1)
  • 3.5 (3)
  • 3.56 (2)
  • 3.83 (5)
  • 3.83 in;97.3 mm (1)
  • 3.88 (1)
  • 3-1/2 (10)
  • 4.06 (4)
  • 4.13 (3)
  • 4.19 (2)
  • 4.33 (1)
  • 4.33 in;110 mm (1)
  • 4.63 (1)
  • 4-1/2 (2)
  • 5.19 (1)
  • 5-1/4 (1)
  • Show More...

• Hub Location

  

  • 90º (4)
  • Side (1)
  • Straight (1)
  • Tee Side (5)
  • Show More...

• Height

  

  • 1.38 (3)
  • 1.44 (1)
  • 1.63 (2)
  • 1.64 (1)
  • 1.64 in;41.7 mm (3)
  • 1.69 (1)
  • 1.88 (4)
  • 1.88 in;47.8 mm (3)
  • 1.94 (1)
  • 1.94 in (1)
  • 1-1/2 (1)
  • 1-3/4 (4)
  • 2 (5)
  • 2 in (2)
  • 2.06 (1)
  • 2.13 (1)
  • 2.14 (3)
  • 2.14 in;54.4 mm (1)
  • 2.31 (5)
  • 2.31 in (1)
  • 2.44 in;62 mm (1)
  • 2.56 (7)
  • 2.63 (1)
  • 2.69 in (1)
  • 2.80 in;71.1 mm (1)
  • 2.81 (1)
  • 2.88 (4)
  • 2.88 in;73.2 mm (1)
  • 2.97 (8)
  • 2.98 in;75.7 mm (1)
  • 2-1/2 (2)
  • 2-1/4 (6)
  • 2-3/4 (4)
  • 3.13 (5)
  • 3.31 (3)
  • 3.38 (2)
  • 3.56 (1)
  • 3.63 (1)
  • 3.65 (3)
  • 3.65 in;92.7 mm (1)
  • 3.69 (2)
  • 3.74 in;95 mm (1)
  • 3.75 in (1)
  • 3.88 (1)
  • 3.89 in;98.8 mm (1)
  • 3-1/4 (2)
  • 4.19 (1)
  • 4.50 in;114.3 mm (1)
  • 4.56 (1)
  • 4.63 (1)
  • 4-1/4 (2)
  • 5.19 (1)
  • 5.88 (1)
  • 5.88 in (2)
  • 5-1/4 (1)
  • 6.03 (1)
  • 6.69 in;169.9 mm (1)
  • 7.39 (1)
  • 7.48 (1)
  • Show More...

• Configuration

  

  • C (1)
  • LB (4)
  • T (3)
  • TB (2)
  • Show More...

• Includes

  

  • Grounding Screw;O-Ring;Cover (1)
  • Internal Ground Screw (2)
  • Internal Ground Screw and O-Ring (1)
  • Stainless Steel Fastening Screw (5)
  • Stainless Steel Screw (3)
  • Stainless Steel Screws (3)
  • Show More...

• Mounting Type

  

  • Box Mount (2)
  • Horizontal Mount/Vertical Mount (3)
  • Screw (8)
  • Threaded (10)
  • Vertical Mount (3)
  • Show More...

• For Use With

  

  • Duplex Flush Receptacle with Spring Cover Mounting BOX (1)
  • FM7 Unilet Conduit Outlet Bodies (1)
  • Form35(R) Unilet(R) Conduit Outlet Body (5)
  • Rigid Steel Conduit;Rigid Aluminum/IMC Conduit (1)
  • Rigid Steel;Rigid Aluminum and IMC Conduit (9)
  • Rigid Steel;Rigid Aluminum;IMC Conduit (4)
  • Rigid/Imc Conduit (24)
  • Threaded Metal Conduit (2)
  • Threaded Metal Conduit;IMC Conduit (2)
  • Threaded Rigid Met (1)
  • Threaded Rigid Metal Conduit and IMC (4)
  • Show More...

• Special Features

  

  • 1 IN Trade Size, Type LC Aluminum Threaded Conduit Body, Maximum No. of Conductors 3 - #4 AWG, Volume 12.20 IN³, For Use With Rigid and IMC Conduit, Furnished With Stamped Aluminum Cover and Neoprene Gasket (2)
  • 1/2 IN Trade Size, Type LL Aluminum Threaded Conduit Body, Volume 4.35 IN³, For Use With Rigid and IMC Conduit, Furnished With Stamped Aluminum Cover and Neoprene Gasket (1)
  • 1-1/2 IN Trade Size, Type LC Aluminum Threaded Conduit Body, Maximum No. of Conductors 3 - #1/0AWG, Volume 33.50IN³, For Use With Rigid and IMC Conduit, Furnished With Stamped Aluminum Cover and Neoprene Gasket (1)
  • 1-1/2 IN Trade Size, Type LL Aluminum Threaded Conduit Body, Maximum No. of Conductors 3 - #1/0AWG, Volume 35.80 IN³, For Use With Rigid and IMC Conduit, Furnished With Stamped Aluminum Cover and Neoprene Gasket (1)
  • 1-1/2 IN Trade Size, Type LR Aluminum Threaded Conduit Body, Maximum No. of Conductors 3 - #1/0AWG, Volume 35.80 IN³, For Use With Rigid and IMC Conduit, Furnished With Stamped Aluminum Cover and Neoprene Gasket (1)
  • 1-1/2 IN Trade Size, Type TC Aluminum Threaded Conduit Body, Maximum No. of Conductors 3 - #1/0AWG, Volume 33.10 IN³, For Use With Rigid and IMC Conduit, Furnished With Stamped Aluminum Cover and Neoprene Gasket (1)
  • 1-1/4 IN Trade Size, Type LC Aluminum Threaded Conduit Body, Maximum No. of Conductors 3 - #2 AWG, Volume 33.40IN³, For Use With Rigid and IMC Conduit, Furnished With Stamped Aluminum Cover and Neoprene Gasket (1)
  • 1-1/4 IN Trade Size, Type LL Aluminum Threaded Conduit Body, Maximum No. of Conductors 3 - #2 AWG, Volume 35.40 IN³, For Use With Rigid and IMC Conduit, Furnished With Stamped Aluminum Cover and Neoprene Gasket (1)
  • 1-1/4 IN Trade Size, Type LR Aluminum Threaded Conduit Body, Maximum No. of Conductors 3 - #2 AWG, Volume 35.80 IN³, For Use With Rigid and IMC Conduit, Furnished With Stamped Aluminum Cover and Neoprene Gasket (1)
  • 1-1/4 IN Trade Size, Type TC Aluminum Threaded Conduit Body, Maximum No. of Conductors 3 - #2 AWG, Volume 33.10 IN³, For Use With Rigid and IMC Conduit, Furnished With Stamped Aluminum Cover and Neoprene Gasket (1)
  • 2 IN Trade Size, Type LC Aluminum Threaded Conduit Body, Maximum No. of Conductors 3 - #4/0AWG, Volume 69.50 IN³, For Use With Rigid and IMC Conduit, Furnished With Stamped Aluminum Cover and Neoprene Gasket (1)
  • 2 IN Trade Size, Type LL Aluminum Threaded Conduit Body, Maximum No. of Conductors 3 - #4/0AWG, Volume 69.70 IN³, For Use With Rigid and IMC Conduit, Furnished With Stamped Aluminum Cover and Neoprene Gasket (1)
  • 2 IN Trade Size, Type TC Aluminum Threaded Conduit Body, Maximum No. of Conductors 3 - #4/0AWG, Volume 67.00 IN³, For Use With Rigid and IMC Conduit, Furnished With Stamped Aluminum Cover and Neoprene Gasket (1)
  • 2-1/2 IN Trade Size, Type LB Aluminum Threaded Conduit Body, Maximum No. of Conductors 3 - #4/0 AWG, Volume 153.00 IN³, For Use With Rigid and IMC Conduit, Furnished With Cover and Gasket (1)
  • 3-1/2 IN Trade Size, Type LB Aluminum Threaded Conduit Body, Maximum No. of Conductors 3 - #350MCM, Volume 304.90 IN³, For Use With Rigid and IMC Conduit, Furnished With Cover and Gasket (1)
  • 3-1/2 IN Trade Size, Type LB Aluminum Threaded Conduit Body, Maximum No. of Conductors 3 - #350MCM, Volume 308.00 IN³, For Use With Rigid and IMC Conduit, Furnished With Cover and Gasket (1)
  • 90 DEG hub placement;Accesses opening: Right side;Allow connections for branch runs;Complete interchangeability with other manufacturers style 5 or 35 conduit bodies;Connect and change direction of conduit runs;internal volume and maximum wire capacity clearly marked on castings;Make bends in conduit system;Malleable iron suitable for use in concrete;Permit access to conductors for maintenance;Provide openings for splicing;Raintight when used with gasketed covers;Serve as pulling fittings;Suitable for wet (1)
  • Accommodate sealing, dome, hub and union hub covers and canopies;Accurately tapped, tapered hub threads for tight, rigid joints and ground continuity;Complies with a wide range of classified area requirements;Connect conduit lengths and change direction of conduit runs;Corrosion-resistant ideal indoors or out;Covers have pry notches for bar or wrench;Explosionproof, dust-ignitionproof;For pulling of wires;Function as sealing fittings when used with sealing covers;Furnished with copperfree (4/10 of 1 PCT ma (13)
  • Accommodate wiring devices such as switches and receptacles;Accurately tapped, tapered threads for tight, rigid joints, ground continuity;Both malleable iron and aluminum boxes have ridge top construction for positive cover/gasket/box fit;Corrosion-resistant ideal for indoor and outdoor installations;Internal grounding screws standard;Malleable iron for high tensile strength and ductility provides greater resistance to impact and shock;Permit access to conductors for maintenance;Provide excellent service i (29)
  • Accurately tapped, tapered hub threads for tight, rigid joints and ground continuity;Compact round box for use where space is limited;Complies with a wide range of classified area requirements;Connect conduit lengths and change direction of conduit runs;Corrosion-resistant: ideal indoors or out;Explosionproof, dust-ignitionproof, raintight;For pulling of wires;Furnished with copperfree (4/10 of 1 PCT maximum) aluminum epoxy powder coat cover;Furnished with internal ground screw;General purpose wiring;Inter (1)
  • Accurately tapped, tapered hub threads for tight, rigid joints and ground continuity;Complies with a wide range of classified area requirements;Connect conduit lengths and change direction of conduit runs;Corrosion-resistant: ideal indoors or out;Explosionproof, dust-ignitionproof, raintight;For pulling of wires;Furnished with internal ground screw;Internal ground screw standard;Internally threaded aluminum bodies with externally threaded aluminum form 1 covers, has 7 hubs - 2 on each of the sides, 1 on th (1)
  • Accurately tapped, tapered threads for tight, rigid joints and excellent ground continuity;Allow connections for branch runs;Completely interchangeable with Crouse-Hinds Form 7 bodies, gaskets and covers;Connect and change direction of conduit runs;Equivalent FM7 and Form 7 units have identical applications and installation dimensions;Fits flush and snug against flat surfaces for more stable installation;Flat back design provides greater cubic content for easier wire pulling and more room for splicing;Hub (73)
  • Accurately tapped, tapered threads for tight, rigid joints and excellent ground continuity;Allow connections for branch runs;Connect and change direction of conduit runs;Exclusive built-in easy-pulling rollers to facilitate cable pulling through hubs and help eliminate cable damage;High tensile strength and ductility, high corrosion resistance, high impact and shock resistance;Make bends in conduit system;Permit access to conductors for maintenance;Provide openings for splicing;Serve as pulling fittings;Si (2)
  • Accurately tapped, tapered threads for tight, rigid joints and excellent ground continuity;Allow connections for branch runs;Connect and change direction of conduit runs;Form 85 copper free aluminum Unilets are lightweight, self oxidizing, self-renewing and offer a high corrosion resistance;Internal volume and maximum wire capacity clearly marked on castings;Lightweight aluminum facilitates shipping, handling and installing;Make bends in conduit system;Permit access to conductors for maintenance;Provide op (4)
  • Accurately tapped, tapered threads for tight, rigid joints and excellent ground continuity;Allow connections for branch runs;Connect and change direction of conduit runs;Form 85 copperfree aluminum Unilets are lightweight, self oxidizing, self-renewing and offer a high corrosion resistance;Internal volume and maximum wire capacity clearly marked on castings;Lightweight aluminum facilitates shipping, handling and installing;Make bends in conduit system;Permit access to conductors for maintenance;Provide ope (5)
  • Accurately tapped, tapered threads for tight, rigid joints and excellent ground continuity;Allow connections for branch runs;Connect and change direction of conduit runs;High tensile strength and ductility, high corrosion resistance, high impact and shock resistance;Make bends in conduit system;Permit access to conductors for maintenance;Provide openings for splicing;Serve as pulling fittings;Sizes with flat-back design ideal where fitting is mounted flat against surface;Smooth, rounded integral bushings i (29)
  • Accurately tapped, tapered threads for tight, rigid joints and ground continuity;Covers have captive stainless steel screws to speed installation, prevent freezing of screws;Larger body size facilitates pulling of large and heavy conductors;Length Requirement: distance between centerline of each hub bushing (conduit stop) exceeds eight times the trade diameter of the conduit per NEC 314.28(A)(1);Smooth, rounded integral bushing in each hub protects conductor insulation;Specially designed raised cast covers (1)
  • Also permits adequate access to cover screws for easy attachment of cover to FS, FD or other device box;Covers open all the way, permitting easy plug insertion and withdrawal;Duplex units accommodate one receptacle and one toggle switch or any combination of the two;Large head cover screws are captivated;Single cover units accommodate NEMA configuration receptacles for locking or non-locking blade plugs, or toggle switches;Unique design of spring door hinge provides smooth action;Wet location (1)
  • Approved for use in wet locations;Stainless steel screws;The cover is secured with clips, not screws;Unique Wedge-Lok clip cover design allows easy removal without damaging the conduit body;Wiring capacity: 0.4 CU-IN as per NEC 314.16(A) (2)
  • Approved for use in wet locations;Stainless steel screws;The cover is secured with clips, not screws;Unique Wedge-Lok clip cover design allows easy removal without damaging the conduit body;Wiring capacity: 0.8 CU-IN as per NEC 314.16(A) (2)
  • Approved for use in wet locations;Stainless steel screws;The cover is secured with clips, not screws;Unique Wedge-Lok clip cover design allows easy removal without damaging the conduit body;Wiring capacity: 1.3 CU-IN as per NEC 314.16(A) (1)
  • Approved for use in wet locations;Stainless steel screws;The cover is secured with clips, not screws;Unique Wedge-Lok clip cover design allows easy removal without damaging the conduit body;Wiring capacity: 16 CU-IN as per NEC 314.16(A) (1)
  • Approved for use in wet locations;Stainless steel screws;The cover is secured with clips, not screws;Unique Wedge-Lok clip cover design allows easy removal without damaging the conduit body;Wiring capacity: 2 CU-IN as per NEC 314.16(A) (2)
  • Approved for use in wet locations;Stainless steel screws;The cover is secured with clips, not screws;Unique Wedge-Lok clip cover design allows easy removal without damaging the conduit body;Wiring capacity: 3 CU-IN as per NEC 314.16(A) (2)
  • Approved for use in wet locations;Stainless steel screws;The cover is secured with clips, not screws;Unique Wedge-Lok clip cover design allows easy removal without damaging the conduit body;Wiring capacity: 4.8 CU-IN as per NEC 314.16(A) (2)
  • Approved for use in wet locations;Stainless steel screws;The cover is secured with clips, not screws;Unique Wedge-Lok clip cover design allows easy removal without damaging the conduit body;Wiring capacity: 9.7 CU-IN as per NEC 314.16(A) (2)
  • Benefit from superior sealing, reduced inventory parts and faster installation times;Can be used as replacement covers for installed bodies or in new installations;Captive pan-head screws;Form-IN-Place covers with integral gasket are approved for use in wet locations;High-strength, corrosion and weather resistant;Wedge-Lok clips (FM7 only) provide superior screwdriver torque and cover seating;Wiring capacity: 0.3 CU-IN as per NEC 314.16(A) (1)
  • Benefit from superior sealing, reduced inventory parts and faster installation times;Can be used as replacement covers for installed bodies or in new installations;Captive pan-head screws;Form-IN-Place covers with integral gasket are approved for use in wet locations;High-strength, corrosion and weather resistant;Wedge-Lok clips (FM7 only) provide superior screwdriver torque and cover seating;Wiring capacity: 0.5 CU-IN as per NEC 314.16(A) (1)
  • Benefit from superior sealing, reduced inventory parts and faster installation times;Can be used as replacement covers for installed bodies or in new installations;Captive pan-head screws;Form-IN-Place covers with integral gasket are approved for use in wet locations;High-strength, corrosion and weather resistant;Wedge-Lok clips (FM7 only) provide superior screwdriver torque and cover seating;Wiring capacity: 1.3 CU-IN as per NEC 314.16(A) (1)
  • Benefit from superior sealing, reduced inventory parts and faster installation times;Can be used as replacement covers for installed bodies or in new installations;Captive pan-head screws;Form-IN-Place covers with integral gasket are approved for use in wet locations;High-strength, corrosion and weather resistant;Wedge-lok clips (FM7 only) provide superior screwdriver torque and cover seating;Wiring capacity: 2 CU-IN as per NEC 314.16(A) (1)
  • Benefit from superior sealing, reduced inventory parts and faster installation times;Can be used as replacement covers for installed bodies or in new installations;Captive pan-head screws;Form-IN-Place covers with integral gasket are approved for use in wet locations;High-strength, corrosion and weather resistant;Wedge-Lok clips (FM7 only) provide superior screwdriver torque and cover seating;Wiring capacity: 2.3 CU-IN as per NEC 314.16(A) (1)
  • Benefit from superior sealing, reduced inventory parts and faster installation times;Can be used as replacement covers for installed bodies or in new installations;Captive pan-head screws;Form-IN-Place covers with integral gasket are approved for use in wet locations;High-strength, corrosion and weather resistant;Wedge-Lok clips (FM7 only) provide superior screwdriver torque and cover seating;Wiring capacity: 2.8 CU-IN as per NEC 314.16(A) (1)
  • Corrosion Resistant;Weatherproof;Rain Tight;Dust Tight (3)
  • Cover tightens on largest perimeter of gasket and fits snugly against portion of gasket that wraps around ridge top of box;Covers have captive stainless steel screws to speed installation, prevents loss of screws (1)
  • Cover tightens on largest perimeter of gasket and fits snugly against portion of gasket that wraps around ridge top of box;Covers have captive stainless steel screws to speed installation, prevents loss of screws;Dry Location;Less gasket (2)
  • Cover tightens on largest perimeter of gasket and fits snugly against portion of gasket that wraps around ridge top of box;Covers have captive stainless steel screws to speed installation, prevents loss of screws;Less gasket (8)
  • Cover tightens on largest perimeter of gasket and fits snugly against portion of gasket that wraps around ridge top of box;Covers have captive stainless steel screws to speed installation, prevents loss of screws;Wet location (2)
  • Domed to provide extra wiring space;Stainless steel fastening screws;Wiring capacity: 0.5 CU-IN as per NEC 314.16(A) (1)
  • Domed to provide extra wiring space;Stainless steel fastening screws;Wiring capacity: 18 CU-IN as per NEC 314.16(A) (1)
  • Domed to provide extra wiring space;Stainless steel fastening screws;Wiring capacity: 2.5 CU-IN as per NEC 314.16(A) (1)
  • Domed to provide extra wiring space;Stainless steel fastening screws;Wiring capacity: 6.5 CU-IN as per NEC 314.16(A) (1)
  • Explosionproof;Corrosion Resistant;Dust Ignitionproof;Rain Tight (1)
  • Explosionproof;Dust Ignitionproof;Rain Tight (3)
  • For preventing passage of gases, vapors or flames from one portion of conduit system to another; Required in Class I, Division 1 and 2 locations within 18 IN of enclosures containing apparatus that may cause arcs, sparks or high temperatures; Required in Class I, Division 1 and 2 locations where 2 IN or larger conduit enters enclosure, fitting housing terminals, splices or taps; Required in Class I, Division 1 and 2 locations at the boundary where conduit leaves classified location; Required in Class I, Di (9)
  • Form 35 Malleable Iron Unilets;High Tensile Strength and Ductility;High Corrosion-Resistant;High Impact Resistant;Shock Resistant (1)
  • Furnished with Internal Ground Screw and O-Ring;Explosionproof;Dust-Ignitionproof (1)
  • NEC/CEC - Suitable for use in the following Hazardous Locations:Class I, Division 2 per NEC 501.10(B)(4) (5)
  • Neoprene (1)
  • Smooth and Rounded Integral Bushings in Hubs Protect Conductor Insulation;Accurately Tapped;Tapered Threads;Rigid Joints and Excellent Ground Continuity;Easier Wire Pulling and More Room for Sp (2)
  • Smooth and Rounded Integral Bushings in Hubs Protect Conductor Insulation;Accurately Tapped;Tapered Threads;Rigid Joints and Excellent Ground Continuity;Form 35 Malleable Iron Unilets;High Tensile Strength and Ductility;High Corrosion-Resistant (7)
  • Stainless steel fastening screws (1)
  • Stainless steel fastening screws;Wiring capacity: 1 CU-IN as per NEC 314.16(A) (1)
  • Threaded Hubs (17)
  • Unique Wedge-Lok Clip Cover Design Allows Easy Removal Without Damaging The Conduit Body (3)
  • Wedge-Lok (3)
  • With Cover and Gasket (1)
  • Show More...

• Application

  

  • Commercial;Industrial;Hazardous Locations (1)
  • For FM7 Unilet Conduit Outlet Bodies (20)
  • For Form 35 Unilet Conduit Outlet Bodies (5)
  • For Form 85 Unilet Conduit Outlet Bodies (6)
  • For Rigid Conduit And IMC (1)
  • For use with 0.50 inch FM7 conduit bodies. Seals and protects. (1)
  • For Use With Duplex Flush Receptacle With Spring Cover (1)
  • For Use With Duplex Flush Receptacles (1)
  • For Use With Non-Locking Blade Plugs (1)
  • For Use With Rigid Metal Conduit And IMC (1)
  • For Use With Rigid Steel, Rigid Aluminum Conduit And IMC (99)
  • For Use With Rigid Steel, Rigid Aluminum Conduit, IMC And EMT (9)
  • For Use With Square Handle Toggle Switches (1)
  • For Use With Square Handle Tumbler Or Toggle Flush Switches (1)
  • For Use With Square Handle Tumbler Or Toggle Switches (3)
  • For Use With Standard 2 Or 3 Wire Duplex Receptacles (3)
  • For Use With Threaded Metal Conduit (15)
  • For Use With Threaded Metal Conduit And IMC (29)
  • For Use With Threaded Rigid Metal Conduit and IMC (7)
  • For Use With Unilets FS And FD Single Gang And Tandem Cast Hub Device Boxes (2)
  • For Use With Unilets FS And FD Single Gang And Tandem Cast Hub Ridge Top Boxes (1)
  • For Used To Cover Aluminum Conduit Body Opening (5)
  • General Purpose Wiring;Pulling of Wire (1)
  • Hazardous Location (5)
  • Hazardous Locations (7)
  • Indoor (1)
  • Provides access to the interior of the raceway for wire pulling , splicing and maintenance, Allows connection of straight and branch conduit runs and 90 degree bends (18)
  • Pulling;Splicing (16)
  • Pulling;Splicing;Hazardous Locations (1)
  • Serve as Pulling Fittings;Make Bends in Conduit System;Provide Openings for Splicing;Connect and Change Direction of Conduit Runs;Allow Connections for Branch Runs;Permit Access to Conductors for Maintenance (10)
  • Wet Location (3)
  • Wiring Device;Conductor (1)
  • Wiring Device;Conductor;Indoor or Outdoor (2)
  • Show More...

• Package Quantity

  

  • 1 ct (1)
  • 1 CT;10 PK (1)
  • 10 CT (3)
  • 10 PK;2 CT (1)
  • 100 PK;10 CT (1)
  • 100 PK;25 CT (1)
  • 20 CT (1)
  • 20 CT;100 PK (1)
  • 20 PK;5 CT (1)
  • 200 PK;50 CT (3)
  • 25 CT;100 PK (2)
  • 25 PK;1 CT (2)
  • 25 PK;5 CT (6)
  • 3 CT;15 PK (1)
  • 5 CT (5)
  • 5 CT;20 PK (2)
  • 5 CT;25 PK (3)
  • 5 CT;50 PK (5)
  • 50 CT;200 PK (3)
  • 50 PK;1 CT (1)
  • 50 PK;10 CT (4)
  • 50 PK;5 CT (6)
  • Show More...

• Weight

  

  • 0.02 lb/EA (1)
  • 0.04 lb/EA (1)
  • 0.09 lb/EA (1)
  • 0.1 lb/EA (1)
  • 0.12 lb/EA (1)
  • 0.13 lb/EA (1)
  • 0.18 lb/EA (2)
  • 0.26 lb/EA (1)
  • 0.3 lb/EA (4)
  • 0.37 lb/EA (1)
  • 0.4 lb/EA (5)
  • 0.53 lb/EA (1)
  • 0.55 lb/EA (1)
  • 0.6 lb/EA (3)
  • 0.65 lb/EA (1)
  • 0.7 lb/EA (1)
  • 0.8 lb/EA (2)
  • 0.86 lb/EA (1)
  • 0.93 lb/EA (1)
  • 1 lb/EA (1)
  • 1.06 lb/EA (1)
  • 1.08 lb/EA (1)
  • 1.17 lb/EA (1)
  • 1.2 lb/EA (1)
  • 1.25 lb/EA (1)
  • 1.41 lb/EA (1)
  • 1.5 lb/EA (2)
  • 1.72 lb/EA (1)
  • 1.8 lb/EA (1)
  • 1.9 lb/EA (1)
  • 2 lb/EA (5)
  • 2.08 lb/EA (1)
  • 2.22 lb/EA (1)
  • 2.89 lb/EA (1)
  • 3 lb (1)
  • 3.2 lb/EA (1)
  • 4.07 lb/EA (1)
  • 5 lb/EA (1)
  • Show More...

• Category Description

  

  • FORM 5 CONDULETS, COVERS, & GASKETS (92)
  • FORM 7, 8, CONDULETS, COVERS, & GASKETS (100)
  • FS BOXES AND COVERS (35)
  • Fuses & Fuse Accessories (9)
  • HAZARDOUS LOCATION FITTINGS (14)
  • HUB STYLE BOXES (GUAB, GUAT, ETC) (16)
  • Show More...

• Mounting

  

  • BOX (15)
  • Lugs (1)
  • Screw-In (42)
  • Show More...

• Material

  

  • Aluminum (37)
  • Cast Aluminum (3)
  • Copperfree (4/10 Of 1 PCT Maximum) Aluminum (19)
  • Die Cast Aluminum (25)
  • Diecast Copperfree (4/10 Of 1 PCT) Aluminum (1)
  • Grayloy-Iron (8)
  • Malleable Iron (44)
  • Pressure Cast Aluminum (8)
  • SAND CAST ALUMINUM (1)
  • Steel (2)
  • Show More...

• Enclosure Type

  

  • Class I Group A B C D;Class II Group E F G;Class III (5)
  • Conduit Outlet Box (1)
  • NEMA FB-1 (20)
  • Show More...

• Type

  

  • 1-Gang Blank Box Cover (1)
  • 1-Gang Box Cover (4)
  • 1-Gang Cast Cover (3)
  • 1-Gang Operating Type Cast Cover (1)
  • 2-Gang Blank Box Cover (1)
  • 2-Gang Box Cover (2)
  • Blank Clip Cover With Screw (20)
  • Blank Cover With Screw (11)
  • BS-A Series Domed Top Design Cover (5)
  • Cast Cover (2)
  • Conduit Body (25)
  • Conduit Body Rigid Threaded (9)
  • Duplex Receptacle Cover (1)
  • EYD Series 25 PCT Fill Vertical Conduit Drain Sealing Fitting With Removable Nipple (1)
  • EYS Series 25 PCT Fill Vertical And Horizontal Sealing Fitting With Removable Nipple (6)
  • EYS Series 25 PCT Fill Vertical Conduit Sealing Fitting (3)
  • EYS Series 25 PCT Fill Vertical Sealing Fitting With Removable Nipple (1)
  • FD Deep Depth 1-Gang Cast Device Box (4)
  • FD Deep Depth 2-Gang Cast Device Box (1)
  • FDB Deep Depth 2-Gang Cast Device Box (1)
  • FDC Deep Depth 1-Gang Cast Device Box (4)
  • FDCT Deep Depth 1-Gang Cast Device Box (2)
  • FDS Deep Depth 1-Gang Cast Device Box (1)
  • FDT Deep Depth 1-Gang Cast Device Box (2)
  • FDX Deep Depth 1-Gang Cast Device Box (2)
  • Form-IN-Place Clip Cover With Integral Gasket (6)
  • FS Shallow Depth 1-Gang Cast Device Box (5)
  • FS Shallow Depth 2-Gang Cast Device Box (2)
  • FSC Shallow Depth 1-Gang Cast Device Box (5)
  • FSC Shallow Depth 2-Gang Cast Device Box (1)
  • FSS Shallow Depth 3-Gang Cast Device Box (1)
  • Gasket for use with FM7 conduit bodies. (1)
  • GRSS Outlet Box (1)
  • GRSSA Outlet Box (1)
  • OUTLET BOX (14)
  • Type C Conduit Outlet Body (16)
  • Type C NEC 8X Conduit Outlet Body With Assembled Cover And Gasket (1)
  • Type LB Conduit Outlet Body (24)
  • Type LL Conduit Outlet Body (18)
  • Type LR Conduit Body (1)
  • Type LR Conduit Outlet Body (18)
  • Type T Conduit Outlet Body (21)
  • Type TB Conduit Outlet Body (14)
  • Type X Conduit Outlet Body (13)
  • Universal Outlet Box (1)
  • Show More...

• Size

  

  • 1 (16)
  • 1/2 (5)
  • 1-1/2 (1)
  • 1-1/4 (1)
  • 1-3/8 IN Opening (1)
  • 2 (1)
  • 3/4 (17)
  • Show More...

• Depth

  

  • 1 (4)
  • 1/2 (4)
  • 1-1/2 (1)
  • 3/4 (8)
  • Show More...

• Cable Entry

  

  • (1) 1 IN Hub (5)
  • (1) 1/2 IN Hub (2)
  • (1) 3/4 IN Hub (5)
  • (13) 3/4 IN Hub (1)
  • (2) 1 IN GRLB Hub (1)
  • (2) 1 IN Hub (4)
  • (2) 1/2 IN GRL Hub (1)
  • (2) 1/2 IN GRLB Hub (1)
  • (2) 1/2 IN Hub (1)
  • (2) 3/4 IN GRC Hub (1)
  • (2) 3/4 IN GRL Hub (1)
  • (2) 3/4 IN GRLB Hub (1)
  • (2) 3/4 IN Hub (7)
  • (3) 1 IN GRT Hub (2)
  • (3) 1 IN Hub (2)
  • (3) 1/2 IN GRT Hub (1)
  • (3) 1-1/2 IN GRT Hub (1)
  • (3) 3/4 IN GRT Hub (1)
  • (3) 3/4 IN Hub (2)
  • (4) 1 IN GRTX Hub (1)
  • (4) 1 IN Hub (1)
  • (4) 1/2 IN GRTX Hub (1)
  • (4) 3/4 IN GRTX Hub (1)
  • (4) 3/4 IN Hub (1)
  • (5) 3/4 IN GRJS Hub (1)
  • (7) 3/4 IN Hub (1)
  • Show More...