Products by Wiremold/Legrand (18)
Products by Wiremold/Legrand (18)
41-58 of 58
837PCCBLK - Wiremold

Three Gang Black Nonmetallic Carpet Flange, For Omnibox® and Modulink™ Series Floor Boxes. For Ortronics Connectivity Use With 829PFLRT Cover. For Wiremold Open System Connectivity Use With 829PFL Cover. Accepts Ortronics MAB6TJ Tracjack, MAB3S2 Series Ii and Wiremold CM Series Open System Adapters, Sold Separately. Note: Polycarbonate Cover Plates Can Only Be Used With Polycarbonate Flanges.

  • MFR Part #: 837PCC-BLK
  • Nacogdoches Availability: Out Of Stock
  • Total Availability: In Stock
  • Manufacturer: Wiremold
  • Find: Similar Items
  • Pkg Sizes: 10 ($642.10) ·
837PCCBLK - Wiremold

Nacogdoches Availability: Out Of Stock

Total Availability: In Stock

Book Price

$64.21

Each

QTY:
Each
Add
837TCALBK - Wiremold

<P>Three-Gang Powder-Coated Aluminum Combination Carpet and Tile Flange, 6.080'' X 13.17'' (154.4MM X 335MM). Accepts Ortronics MAB6TJ Tracjack and MAB3S2 Series Ii Adapters and Wiremold CM Series Inserts, Sold Separately. Note: Brass Covers and Flanges Are Not Interchangeable With Aluminum or Nonmetallic Covers and Flanges. Nonmetallic Covers Are Interchangeable With Aluminum Flanges.</P>

  • MFR Part #: 837TCAL-BK
  • Nacogdoches Availability: Out Of Stock
  • Total Availability: In Stock
  • Manufacturer: Wiremold
  • Find: Similar Items
  • Pkg Sizes: 1 ($129.51) ·
837TCALBK - Wiremold

Nacogdoches Availability: Out Of Stock

Total Availability: In Stock

Book Price

$129.51

Each

QTY:
Each
Add
881DIV - Wiremold

<P>Used to Isolate Power and Communication Compartments. Graduated Cubic Inch Markings Are Marked Clearly On The Divider and Correspond Directly to The Cubic Inch Markings On The Interior Of The Box. Cuts Easily With A Utility Knife. Supplied With A Receptacle Plate That Completes Separation Of Power and Low Voltage. One Divider Required For Dual-Service Activation, Ordered Separately.</P>

  • MFR Part #: 881DIV
  • Nacogdoches Availability: Out Of Stock
  • Total Availability: In Stock
  • Manufacturer: Wiremold
  • Find: Similar Items
  • Pkg Sizes: 10 ($124.90) ·
881DIV - Wiremold

Nacogdoches Availability: Out Of Stock

Total Availability: In Stock

Book Price

$12.49

Each

QTY:
Each
Add
881RC4ATCBK - Wiremold

Ratchet-Pro™ Multiservice Activation Kit For 881PVC Floor Box Comes Complete With Two (2) 20A Duplex Receptacles, (Receptacles Can Be Wired As Standard or Isolated Ground), Flange and Slide Holder, 881ADP Adapter, and 881DIV Divider. Provided With Wiremold CM Series Open System Unloaded Adapters, Ortronics Series Ii and Tracjack Adapters. Modular Jacks Sold Separately. Caution: Not For Use On Concrete Pours Less Than 4 1/2" (114MM) Deep. Not For Use When Concrete Is The Finished Floor. Use Only For Tile, C

  • MFR Part #: 881RC4ATCBK
  • Nacogdoches Availability: Out Of Stock
  • Total Availability: In Stock
  • Manufacturer: Wiremold
  • Find: Similar Items
  • Pkg Sizes: 1 ($220.53) ·
881RC4ATCBK - Wiremold

Nacogdoches Availability: Out Of Stock

Total Availability: In Stock

Book Price

$220.53

Each

QTY:
Each
Add
885B - Wiremold

The 880 Series Floor Box Provides An Excellent Solution For The Low Density Power or Communication Requirements In Open Space Areas. The 880 Series Brings The Power or Communication Service Directly to The Workstation. The 880 Series Comes In A Cast Iron Version For On Grade Applications and An Economical Stamped Steel Version For Above Grade Applications. The 880 Series Is Supported By One Of The Most Complete Lines Of Brass, Brushed Aluminum, and Nonmetallic Activations In The Industry. Some Applications

  • MFR Part #: 885B
  • Nacogdoches Availability: Out Of Stock
  • Total Availability: In Stock
  • Manufacturer: Wiremold
  • Find: Similar Items
  • Pkg Sizes: 8 ($436.56) ·
885B - Wiremold

Nacogdoches Availability: Out Of Stock

Total Availability: In Stock

Book Price

$54.57

Each

QTY:
Each
Add
895DCC - Wiremold

<P>Supplied With 1/2'' (12.7MM) Screw Plug For Accessing Communication Cables. 5 1/2'' (140MM) Diameter For Carpet Applications Only. Used In Conjunction With The 881DIV to Complete The Dual Service 881 PVC Floor Box. Note: For Carpet or Tile Installations. All Cover Plates Are Furnished With Gasket and Three Screws. The 895P Polycarbonate Series Cover Plates Must Be Field Modified For Dual Service.</P>

  • MFR Part #: 895DCC
  • Nacogdoches Availability: Out Of Stock
  • Total Availability: In Stock
  • Manufacturer: Wiremold
  • Find: Similar Items
  • Pkg Sizes: 8 ($834.16) ·
895DCC - Wiremold

Nacogdoches Availability: Out Of Stock

Total Availability: In Stock

Book Price

$104.27

Each

QTY:
Each
Add
895TCAL - Wiremold

The Wiremold Ratchet-Pro™ Brushed Aluminum Duplex Cover Plate With Flip Lids, 5 1/2 Inch (140MM) For Carpet or Tile Installations. Cover Also Works With 880 Series™ Boxes. Note: All Cover Plates Are Furnished With Gasket and Three Screws. The 895P Polycarbonate Series Cover Plates Must Be Field Modified For Dual Service.

  • MFR Part #: 895TCAL
  • Nacogdoches Availability: Out Of Stock
  • Total Availability: In Stock
  • Manufacturer: Wiremold
  • Find: Similar Items
  • Pkg Sizes: 8 ($691.52) ·
895TCAL - Wiremold

Nacogdoches Availability: Out Of Stock

Total Availability: In Stock

Book Price

$86.44

Each

QTY:
Each
Add
896CK1 - Wiremold

<P>Brass Cover Plate With 1'' (25MM) Threaded Opening For Carpet. Note: For Carpet or Tile Installations. All Cover Plates Are Furnished With Gasket and Three Screws. The 895P Polycarbonate Series Cover Plates Must Be Field Modified For Dual Service.</P>

  • MFR Part #: 896CK-1
  • Nacogdoches Availability: Out Of Stock
  • Total Availability: In Stock
  • Manufacturer: Wiremold
  • Find: Similar Items
  • Pkg Sizes: 8 ($587.28) ·
896CK1 - Wiremold

Nacogdoches Availability: Out Of Stock

Total Availability: In Stock

Book Price

$73.41

Each

QTY:
Each
Add
896CK34 - Wiremold

<P>Brass Cover Plate With 3/4'' (19.1MM) Threaded Opening For Carpet. Note: For Carpet or Tile Installations. All Cover Plates Are Furnished With Gasket and Three Screws. The 895P Polycarbonate Series Cover Plates Must Be Field Modified For Dual Service.</P>

  • MFR Part #: 896CK-3/4
  • Nacogdoches Availability: Out Of Stock
  • Total Availability: In Stock
  • Manufacturer: Wiremold
  • Find: Similar Items
  • Pkg Sizes: 8 ($587.28) ·
896CK34 - Wiremold

Nacogdoches Availability: Out Of Stock

Total Availability: In Stock

Book Price

$73.41

Each

QTY:
Each
Add
FPCTCGY - Wiremold

Floorport Service Fittings For Resource RFB® Series Floor Boxes, Walkercell® Cellular Raceway, and Walkerdeck Systems Provide Flexibility In Recessed and Furniture Feed Applications. The Enhanced Design Also Increases The Ease Of Use and Color Options While Continuing to Exceed Ul Scrub Water Requirements. These Covers Are Ideal For Use In A Wide Variety Of Applications Including Educational Facilities, Airports, and Commercial and Institutional Office Buildings. The Covers Are Ul Listed to U.S. and Canadi

  • MFR Part #: FPCTCGY
  • Nacogdoches Availability: Out Of Stock
  • Total Availability: In Stock
  • Manufacturer: Wiremold
  • Find: Similar Items
  • Pkg Sizes: 8 ($1,189.36) ·
FPCTCGY - Wiremold

Nacogdoches Availability: Out Of Stock

Total Availability: In Stock

Book Price

$148.67

Each

QTY:
Each
Add
RC3ATCBK - Wiremold

Assembled Unit. Prewired 20A Duplex Receptacle Can Be Wired As A Standard Duplex Receptacle or Isolated Ground. Flange Available In Painted Gray (Gy), Black (BK), Ivory (Vy) or Brushed Metal Finishes In Aluminum (Al), and Brass (BS). Slide Covers Match The Painted Flange Colors: Gray, Black, and Ivory. Aluminum and Brass Flanges Shipped With Black Slide Cover. Brass Flange Also Available With Nonmetallic Brass Colored Slide Holder (Ab). Aluminum Flange Also Available With Nonmetallic Aluminum Colored Slide

  • MFR Part #: RC3ATCBK
  • Nacogdoches Availability: Out Of Stock
  • Total Availability: In Stock
  • Manufacturer: Wiremold
  • Find: Similar Items
  • Pkg Sizes: 1 ($338.53) ·
RC3ATCBK - Wiremold

Nacogdoches Availability: Out Of Stock

Total Availability: In Stock

Book Price

$338.53

Each

QTY:
Each
Add
RFB2 - Wiremold

Resource RFB® Series Two Gang Floor Box Is A Versatile Activation Solution That Provides Power and/or Communication Services to Open Space Areas or Directly to The Workstation. For Use In Either Wood or Above Grade Concrete Floors, It Is Fully Adjustable With A Tunnel Compartment. Supplied With One (1) Duplex Receptacle Mounting Plate, and One (1) Communication Mounting Plate. Other Device Plates Sold Separately. RFB Series Floor Boxes Are Now Available With The New Floorport Activation Covers. This New C

  • MFR Part #: RFB2
  • Nacogdoches Availability: Out Of Stock
  • Total Availability: In Stock
  • Manufacturer: Wiremold
  • Find: Similar Items
  • Pkg Sizes: 1 ($146.51) ·
RFB2 - Wiremold

Nacogdoches Availability: Out Of Stock

Total Availability: In Stock

Book Price

$146.51

Each

QTY:
Each
Add
RFB2DP - Wiremold

<P>Accepts Standard 15A and 20A Duplex Receptacles. Note: For RFB2 Series Floor Boxes Only.</P>

  • MFR Part #: RFB2DP
  • Nacogdoches Availability: Out Of Stock
  • Total Availability: In Stock
  • Manufacturer: Wiremold
  • Find: Similar Items
  • Pkg Sizes: 10 ($214.10) ·
RFB2DP - Wiremold

Nacogdoches Availability: Out Of Stock

Total Availability: In Stock

Book Price

$21.41

Each

QTY:
Each
Add
RFB6DP - Wiremold

Resource RFB® Series Duplex Device Plate Works With RFB and Rfbe Series Four and 6 Gang Floor Boxes. Accepts Standard 15 Amp and 20 Amp Duplex Receptacles.

  • MFR Part #: RFB6DP
  • Nacogdoches Availability: Out Of Stock
  • Total Availability: In Stock
  • Manufacturer: Wiremold
  • Find: Similar Items
  • Pkg Sizes: 6 ($109.56) ·
RFB6DP - Wiremold

Nacogdoches Availability: Out Of Stock

Total Availability: In Stock

Book Price

$18.26

Each

QTY:
Each
Add
RFBKIT - Wiremold

<P>Barrier Kit Used to Separate Power and Communication Wires In Partition Feed Covers. Supplied With Base and Three Extensions to Adjust to Cover Height. Kit Should Be Used On RFB2, RFB2-SS, RFB2-Og, RFB4 and RFB4-SS Floor Boxes. Kits Are Sold Separately.</P>

  • MFR Part #: RFBKIT
  • Nacogdoches Availability: Out Of Stock
  • Total Availability: In Stock
  • Manufacturer: Wiremold
  • Find: Similar Items
  • Pkg Sizes: 1 ($22.77) ·
RFBKIT - Wiremold

Nacogdoches Availability: Out Of Stock

Total Availability: In Stock

Book Price

$22.77

Each

QTY:
Each
Add
6ATC2PSB - Wiremold

Recessed Prewired Surface Style Poke-Thru Assembly – Designed to Be Installed In A Concrete Floor Which Has Access In The Ceiling Of The Floor Below For Running Power, Data and A/V Services. Poke-Thru Device Installs Into A 6" (152MM) to A 6 1/8" (155MM) Diameter Hole. The Unit Comes Complete With A Surface Style Cover and Two (2) Prewired, Pre-Installed Duplex Receptacles That Are Recessed 4" (102MM) Below The Floor Surface Level. Surface Style Cover Is An Aluminum Cover That Is Designed to Sit On Top Of

  • MFR Part #: 6ATC2PSB
  • Nacogdoches Availability: Out Of Stock
  • Total Availability: Out of Stock
  • Manufacturer: Wiremold
  • Find: Similar Items
  • Pkg Sizes: 1 ($939.09) ·
6ATC2PSB - Wiremold

Nacogdoches Availability: Out Of Stock

Total Availability: Out of Stock

Book Price

$939.09

Each

QTY:
Each
Add
828C0MTCAL - Wiremold

Brushed Aluminum Communication Cover Plate, For Omnibox® and Modulink™ Series Floor Boxes. Allows For Up to Four Communication Devices to Be Mounted In A Recessed Position Within The 880S and 880CS Floor Boxes. Has Removable Slides For Cable Egress. Note: Not For Use With 817C, 827C, and 837C Flanges.

  • MFR Part #: 828COMTCAL
  • Nacogdoches Availability: Out Of Stock
  • Total Availability: Out of Stock
  • Manufacturer: Wiremold
  • Find: Similar Items
  • Pkg Sizes: 5 ($563.55) ·
828C0MTCAL - Wiremold

Nacogdoches Availability: Out Of Stock

Total Availability: Out of Stock

Book Price

$112.71

Each

QTY:
Each
Add
EFB45CTCBK - Wiremold

Evolution™ Series Black Powder Coated Surface-Style Cover With Floor Covering Insert Lid Is A Low Profile Cover Designed to Attach to The EFB45S Style Floor Boxes. Each Cover Is Made Of Die Cast Aluminium and Is Equipped With A Durable Hinge Allowing The Cover to Rotate Open 180 Degrees, and Two (2) Slide Egress Doors That Lock In The Open Position and Automatically Close Around The Cables When The Cover Is Closed. The Flange Has A Beveled Edge That Meets Ada Guidelines and Reduces Tripping Hazards. These

  • MFR Part #: EFB45CTCBK
  • Nacogdoches Availability: Out Of Stock
  • Total Availability: Out of Stock
  • Manufacturer: Wiremold
  • Find: Similar Items
  • Pkg Sizes: 1 ($404.36) ·
EFB45CTCBK - Wiremold

Nacogdoches Availability: Out Of Stock

Total Availability: Out of Stock

Book Price

$404.36

Each

QTY:
Each
Add
837PCCBLK - Wiremold

Three Gang Black Nonmetallic Carpet Flange, For Omnibox® and Modulink™ Series Floor Boxes. For Ortronics Connectivity Use With 829PFLRT Cover. For Wiremold Open System Connectivity Use With 829PFL Cover. Accepts Ortronics MAB6TJ Tracjack, MAB3S2 Series Ii and Wiremold CM Series Open System Adapters, Sold Separately. Note: Polycarbonate Cover Plates Can Only Be Used With Polycarbonate Flanges.

MFR Part #:
837PCC-BLK
Manufacturer:
Wiremold
Local Availability:
Out Of Stock
Total Availability:
Pkg Sizes:
10 Each ($642.10)
837TCALBK - Wiremold

<P>Three-Gang Powder-Coated Aluminum Combination Carpet and Tile Flange, 6.080'' X 13.17'' (154.4MM X 335MM). Accepts Ortronics MAB6TJ Tracjack and MAB3S2 Series Ii Adapters and Wiremold CM Series Inserts, Sold Separately. Note: Brass Covers and Flanges Are Not Interchangeable With Aluminum or Nonmetallic Covers and Flanges. Nonmetallic Covers Are Interchangeable With Aluminum Flanges.</P>

MFR Part #:
837TCAL-BK
Manufacturer:
Wiremold
Local Availability:
Out Of Stock
Total Availability:
Pkg Sizes:
1 Each ($129.51)
881DIV - Wiremold

<P>Used to Isolate Power and Communication Compartments. Graduated Cubic Inch Markings Are Marked Clearly On The Divider and Correspond Directly to The Cubic Inch Markings On The Interior Of The Box. Cuts Easily With A Utility Knife. Supplied With A Receptacle Plate That Completes Separation Of Power and Low Voltage. One Divider Required For Dual-Service Activation, Ordered Separately.</P>

MFR Part #:
881DIV
Manufacturer:
Wiremold
Local Availability:
Out Of Stock
Total Availability:
Pkg Sizes:
10 Each ($124.90)
881RC4ATCBK - Wiremold

Ratchet-Pro™ Multiservice Activation Kit For 881PVC Floor Box Comes Complete With Two (2) 20A Duplex Receptacles, (Receptacles Can Be Wired As Standard or Isolated Ground), Flange and Slide Holder, 881ADP Adapter, and 881DIV Divider. Provided With Wiremold CM Series Open System Unloaded Adapters, Ortronics Series Ii and Tracjack Adapters. Modular Jacks Sold Separately. Caution: Not For Use On Concrete Pours Less Than 4 1/2" (114MM) Deep. Not For Use When Concrete Is The Finished Floor. Use Only For Tile, C

MFR Part #:
881RC4ATCBK
Manufacturer:
Wiremold
Local Availability:
Out Of Stock
Total Availability:
Pkg Sizes:
1 Each ($220.53)
885B - Wiremold

The 880 Series Floor Box Provides An Excellent Solution For The Low Density Power or Communication Requirements In Open Space Areas. The 880 Series Brings The Power or Communication Service Directly to The Workstation. The 880 Series Comes In A Cast Iron Version For On Grade Applications and An Economical Stamped Steel Version For Above Grade Applications. The 880 Series Is Supported By One Of The Most Complete Lines Of Brass, Brushed Aluminum, and Nonmetallic Activations In The Industry. Some Applications

MFR Part #:
885B
Manufacturer:
Wiremold
Local Availability:
Out Of Stock
Total Availability:
Pkg Sizes:
8 Each ($436.56)
895DCC - Wiremold

<P>Supplied With 1/2'' (12.7MM) Screw Plug For Accessing Communication Cables. 5 1/2'' (140MM) Diameter For Carpet Applications Only. Used In Conjunction With The 881DIV to Complete The Dual Service 881 PVC Floor Box. Note: For Carpet or Tile Installations. All Cover Plates Are Furnished With Gasket and Three Screws. The 895P Polycarbonate Series Cover Plates Must Be Field Modified For Dual Service.</P>

MFR Part #:
895DCC
Manufacturer:
Wiremold
Local Availability:
Out Of Stock
Total Availability:
Pkg Sizes:
8 Each ($834.16)
895TCAL - Wiremold

The Wiremold Ratchet-Pro™ Brushed Aluminum Duplex Cover Plate With Flip Lids, 5 1/2 Inch (140MM) For Carpet or Tile Installations. Cover Also Works With 880 Series™ Boxes. Note: All Cover Plates Are Furnished With Gasket and Three Screws. The 895P Polycarbonate Series Cover Plates Must Be Field Modified For Dual Service.

MFR Part #:
895TCAL
Manufacturer:
Wiremold
Local Availability:
Out Of Stock
Total Availability:
Pkg Sizes:
8 Each ($691.52)
896CK1 - Wiremold

<P>Brass Cover Plate With 1'' (25MM) Threaded Opening For Carpet. Note: For Carpet or Tile Installations. All Cover Plates Are Furnished With Gasket and Three Screws. The 895P Polycarbonate Series Cover Plates Must Be Field Modified For Dual Service.</P>

MFR Part #:
896CK-1
Manufacturer:
Wiremold
Local Availability:
Out Of Stock
Total Availability:
Pkg Sizes:
8 Each ($587.28)
896CK34 - Wiremold

<P>Brass Cover Plate With 3/4'' (19.1MM) Threaded Opening For Carpet. Note: For Carpet or Tile Installations. All Cover Plates Are Furnished With Gasket and Three Screws. The 895P Polycarbonate Series Cover Plates Must Be Field Modified For Dual Service.</P>

MFR Part #:
896CK-3/4
Manufacturer:
Wiremold
Local Availability:
Out Of Stock
Total Availability:
Pkg Sizes:
8 Each ($587.28)
FPCTCGY - Wiremold

Floorport Service Fittings For Resource RFB® Series Floor Boxes, Walkercell® Cellular Raceway, and Walkerdeck Systems Provide Flexibility In Recessed and Furniture Feed Applications. The Enhanced Design Also Increases The Ease Of Use and Color Options While Continuing to Exceed Ul Scrub Water Requirements. These Covers Are Ideal For Use In A Wide Variety Of Applications Including Educational Facilities, Airports, and Commercial and Institutional Office Buildings. The Covers Are Ul Listed to U.S. and Canadi

MFR Part #:
FPCTCGY
Manufacturer:
Wiremold
Local Availability:
Out Of Stock
Total Availability:
Pkg Sizes:
8 Each ($1,189.36)
RC3ATCBK - Wiremold

Assembled Unit. Prewired 20A Duplex Receptacle Can Be Wired As A Standard Duplex Receptacle or Isolated Ground. Flange Available In Painted Gray (Gy), Black (BK), Ivory (Vy) or Brushed Metal Finishes In Aluminum (Al), and Brass (BS). Slide Covers Match The Painted Flange Colors: Gray, Black, and Ivory. Aluminum and Brass Flanges Shipped With Black Slide Cover. Brass Flange Also Available With Nonmetallic Brass Colored Slide Holder (Ab). Aluminum Flange Also Available With Nonmetallic Aluminum Colored Slide

MFR Part #:
RC3ATCBK
Manufacturer:
Wiremold
Local Availability:
Out Of Stock
Total Availability:
Pkg Sizes:
1 Each ($338.53)
RFB2 - Wiremold

Resource RFB® Series Two Gang Floor Box Is A Versatile Activation Solution That Provides Power and/or Communication Services to Open Space Areas or Directly to The Workstation. For Use In Either Wood or Above Grade Concrete Floors, It Is Fully Adjustable With A Tunnel Compartment. Supplied With One (1) Duplex Receptacle Mounting Plate, and One (1) Communication Mounting Plate. Other Device Plates Sold Separately. RFB Series Floor Boxes Are Now Available With The New Floorport Activation Covers. This New C

MFR Part #:
RFB2
Manufacturer:
Wiremold
Local Availability:
Out Of Stock
Total Availability:
Pkg Sizes:
1 Each ($146.51)
RFB2DP - Wiremold

<P>Accepts Standard 15A and 20A Duplex Receptacles. Note: For RFB2 Series Floor Boxes Only.</P>

MFR Part #:
RFB2DP
Manufacturer:
Wiremold
Local Availability:
Out Of Stock
Total Availability:
Pkg Sizes:
10 Each ($214.10)
RFB6DP - Wiremold

Resource RFB® Series Duplex Device Plate Works With RFB and Rfbe Series Four and 6 Gang Floor Boxes. Accepts Standard 15 Amp and 20 Amp Duplex Receptacles.

MFR Part #:
RFB6DP
Manufacturer:
Wiremold
Local Availability:
Out Of Stock
Total Availability:
Pkg Sizes:
6 Each ($109.56)
RFBKIT - Wiremold

<P>Barrier Kit Used to Separate Power and Communication Wires In Partition Feed Covers. Supplied With Base and Three Extensions to Adjust to Cover Height. Kit Should Be Used On RFB2, RFB2-SS, RFB2-Og, RFB4 and RFB4-SS Floor Boxes. Kits Are Sold Separately.</P>

MFR Part #:
RFBKIT
Manufacturer:
Wiremold
Local Availability:
Out Of Stock
Total Availability:
Pkg Sizes:
1 Each ($22.77)
6ATC2PSB - Wiremold

Recessed Prewired Surface Style Poke-Thru Assembly – Designed to Be Installed In A Concrete Floor Which Has Access In The Ceiling Of The Floor Below For Running Power, Data and A/V Services. Poke-Thru Device Installs Into A 6" (152MM) to A 6 1/8" (155MM) Diameter Hole. The Unit Comes Complete With A Surface Style Cover and Two (2) Prewired, Pre-Installed Duplex Receptacles That Are Recessed 4" (102MM) Below The Floor Surface Level. Surface Style Cover Is An Aluminum Cover That Is Designed to Sit On Top Of

MFR Part #:
6ATC2PSB
Manufacturer:
Wiremold
Local Availability:
Out Of Stock
Total Availability:
Pkg Sizes:
1 Each ($939.09)
828C0MTCAL - Wiremold

Brushed Aluminum Communication Cover Plate, For Omnibox® and Modulink™ Series Floor Boxes. Allows For Up to Four Communication Devices to Be Mounted In A Recessed Position Within The 880S and 880CS Floor Boxes. Has Removable Slides For Cable Egress. Note: Not For Use With 817C, 827C, and 837C Flanges.

MFR Part #:
828COMTCAL
Manufacturer:
Wiremold
Local Availability:
Out Of Stock
Total Availability:
Pkg Sizes:
5 Each ($563.55)
EFB45CTCBK - Wiremold

Evolution™ Series Black Powder Coated Surface-Style Cover With Floor Covering Insert Lid Is A Low Profile Cover Designed to Attach to The EFB45S Style Floor Boxes. Each Cover Is Made Of Die Cast Aluminium and Is Equipped With A Durable Hinge Allowing The Cover to Rotate Open 180 Degrees, and Two (2) Slide Egress Doors That Lock In The Open Position and Automatically Close Around The Cables When The Cover Is Closed. The Flange Has A Beveled Edge That Meets Ada Guidelines and Reduces Tripping Hazards. These

MFR Part #:
EFB45CTCBK
Manufacturer:
Wiremold
Local Availability:
Out Of Stock
Total Availability:
Pkg Sizes:
1 Each ($404.36)

Begin Live Chat