Narrow By:

• Manufacturer: Klein

• Product Type

  

  • #0 PH Mini Screwdriver 3" Shank (1)
  • #2 Insulated Screwdriver 4" Shank (1)
  • #2 PH Screw Holding Screwdriver (1)
  • #2 Phillips Power Driver 1" PK 15 (1)
  • #2 Phillips Screwdriver Rapi-Driv® (1)
  • 1/16" Keystone Mini Screwdriver 2" (1)
  • 1/2" Hex Journeyman T-Handle 6" (1)
  • 1/2" Nut Driver 6" Hollow Shaft (1)
  • 1/2" Power Nut Driver 5" Length (1)
  • 1/4" Magnetic Nut Driver 3" Shaft (1)
  • 1/4" Magnetic Nut Driver 6" Shaft (1)
  • 1/4" Nut Driver 3" Shaft Cushioned (1)
  • 1/4" SL Power Drivers 1" Bit PK 5 (1)
  • 1/4" SL Power Drivers 3-1/2" PK 5 (1)
  • 1/4-20 Drill Tap (1)
  • 1/8" Cab Tip Mini Screwdriver 6" (1)
  • 1/8" Cab Tip Mini Screwdriver 8" (1)
  • 10 Pocket Tool Pouch Knife Snap (1)
  • 10" Adj. Wrench Extra-Capacity (1)
  • 1-1/4" Iron Conduit Bender Head (1)
  • 12' (3.7 M) Lo-Flex Fish Rod Set (1)
  • 12 Pocket Tote W/Shoulder Strap (1)
  • 12" Adj. Wrench Extra Capacity (1)
  • 12" Bi-Metal Blades, 100-PK (1)
  • 12" Bi-Metal Blades, 10-PK (1)
  • 13" Flexible Fish Tape Leader (1)
  • 1-3/8" Carbide Hole Cutter (1)
  • 24" (610 MM) Canvas Tool Bag (1)
  • 2-In-1 Nut Driver, 3" Slide Driver (1)
  • 2-In-1 Nut Driver, 6" Slide Driver (1)
  • 2-In-1 Nut Driver, Hex, 1/4", 5/16" (1)
  • 2-In-1 Rapi-Driv® Screwdriver (1)
  • 3/16" Cab Tip Screwdriver Rapi-Driv (1)
  • 3/16" Cabinet Tip Screwdriver 3" (1)
  • 3/16" Cabinet Tip Screwdriver 8" (1)
  • 3/16" Nut Driver 3" Hollow Shaft (1)
  • 3/16" Screw Holding Screwdriver 3" (1)
  • 3/16" SL Drivers 3-1/2" Bit PK 5 (1)
  • 3/16" SL Power Drivers 1", PK 5 (1)
  • 3/4" PVC Cutter (1)
  • 3/8" Drive Socket Wrench Set, 20 PC (1)
  • 3/8" Magnetic Nut Driver 3" Shaft (1)
  • 3/8" Nut Driver 3"Hollow Shaft (1)
  • 32" Standard Cable Cutter (1)
  • 4" Adjustable Wrench Plastic Dipped (1)
  • 5 Pocket Tool Pouch Canvas (1)
  • 5/16" Magnetic Nut Driver (1)
  • 5/16" Nut Driver 6" Hollow Shaft (1)
  • 6" (152 MM) Pump Pliers (1)
  • 6" Slip-Joint Pliers (1)
  • 7/16" Magnetic Nut Driver 6" Shaft (1)
  • 7/16" Nut Driver 6" Hollow Shaft (1)
  • 7/16" Power Nut Driver 5" Length (1)
  • 7-Pocket Tool Pouch (1)
  • 8 Pocket Tool Pouch Slotted (1)
  • 8 Pocket Tool Pouch Tunnel Loop (1)
  • 8-In-1 Slide Driver Screw/Nutdriver (1)
  • 9" Pliers, Side Cut, Tape Pull (1)
  • 9/16" Nut Driver 6" Hollow Shaft (1)
  • 9/16" Power Nut Driver 10" Length (1)
  • Ac/DC Voltage Tester (1)
  • Ac/DC Voltage/Continuity Tester (1)
  • Accu-Bend(TM) Conduit and Pipe (2)
  • Adj. Length Blade, SQ #1, #2 (1)
  • Adj. Wrench Extra Capacity 8-1/4" (1)
  • Adjustable Wrench (3)
  • Aerial Oval Bucket 15 Pocket, Hooks (1)
  • Afci /Gfci Outlet Tester (1)
  • All Purpose Diagonal Cutting Pliers (1)
  • All-Purpose Pliers, Spring Loaded (1)
  • Apprentice Tool Set, 6 PC (1)
  • Assembled Conduit Bender (3)
  • Back Pocket Tool Pouch (1)
  • Bi-Metal Blades, 100-PK (1)
  • Bi-Metal Blades, 10-PK (1)
  • Black Light Lockback Knife 2-1/4" (1)
  • Black Nylon Zipper Bag (1)
  • Blade For Ratcheting PVC Cutter (1)
  • Blades For Large Cable Strippers (1)
  • Cabinet Tip Mini Screwdriver (2)
  • Cabinet Tip Screwdriver (3)
  • Cable Cutter (2)
  • Cable Skinning Utility Knife (1)
  • Cable Splicer Knife Holder Tunnel (1)
  • Camouflage Zipper Bag (1)
  • Can Wrench, 3/8" and 7/16" Hex Nut (1)
  • Canvas Bag (2)
  • Canvas Zipper Bag (3)
  • Canvas Zipper Bag, Consumables, BL (1)
  • Cap Visor Light (1)
  • Circuit Breaker Finder Accy Kit (1)
  • Combination Stripping and Cutting Tool (1)
  • Combo Knife and Scissors Sharpener (1)
  • Conduit And Pipe (2)
  • Conduit Bender (1)
  • Conduit Locknut and Reaming Pliers (1)
  • Conduit Locknut Wrench, 1/2", 3/4" (1)
  • Conduit Reamer (1)
  • Conduit Reamer Drill Head (1)
  • Connector Crimping Long-Nose Pliers (1)
  • Crimping Tool (1)
  • Crimping/Cutting Tool (2)
  • Crimping/Cutting Tool For Terminals (1)
  • Cushion-Grip Scratch Awl (1)
  • Cushion-Grip Screwdriver Set (1)
  • Cushion-Grip Screwdriver Set, 4 PC (1)
  • Cut Resistant Glove (2)
  • Cutting Plier (2)
  • Diagonal Cutting Plier (5)
  • Diagonal Cutting Pliers Heavy Duty (1)
  • Digital Clamp Meter (3)
  • Dual-Laser Infrared Therm, 20:1 (1)
  • Dual-Wire Stripper/Cutter (1)
  • Eight-Key Inch Folding Hex Key Set (1)
  • Electrician Tool Set (1)
  • Electricians Gloves Extra-Large (1)
  • Electricians Gloves Large (1)
  • Electrician's Scissor (2)
  • Electrician'S Straight-Claw Hammer (1)
  • Electricians Tool Apron M/L (1)
  • Electrician's Tool Belt (6)
  • Electricians Tool Set (1)
  • Electronic Ac/DC Voltage Tester (2)
  • Electronic Diagonal Cutting Pliers (1)
  • Electronics Screwdriver 4-In-1 (1)
  • Fiberglass Fish Tape Repair Kit (1)
  • Five-Key Inch Folding Hex Key Set (1)
  • Flex Bit Kit (1)
  • Flexible Ac Current Clamp Meter (1)
  • Flush Cutter, Lightweight, 5" (1)
  • Folding Hex Key Set (3)
  • Folding Utility Knife (2)
  • Hard Hat, Non-Vented Brim Style (1)
  • Hard Hat, Non-Vented Cap Style (1)
  • Hard Hat, Non-Vented Cap W/Headlamp (1)
  • Hard Hat, Vented Brim W/Headlamp (1)
  • Hard Hat, Vented Full Brim Style (1)
  • Heavy Duty Diagonal Cutting Pliers (1)
  • Heavy Duty Side Cutting Pliers (2)
  • High Lev. Pliers, HD Side Cut, 9" (1)
  • High Leverage Cable Cutter (2)
  • High Tension Hacksaw (1)
  • Hi-Viz Diagonal Cutting Pliers (1)
  • Hole Cutter (2)
  • Hole Cutter Kit (1)
  • Hole Saw (1)
  • Idc Connector Crimping Pliers (1)
  • Insul Changeable Drivers W/ Pouch (1)
  • Insulated 5/16" - 6" Nut Driver (1)
  • Iron Conduit Bender (2)
  • Jab Saw (1)
  • Journeyman Diagonal Cutting Pliers (1)
  • Journeyman Grip Gloves, Size L (1)
  • Journeyman Pump Pliers (1)
  • Journeyman Utility Gloves, Size XL (1)
  • Keystone-Tip (3)
  • Klein-Kurve Wire Stripper, Cutter (1)
  • Klein-Kurve® Wire Stripper/Cutter (1)
  • Large Cable Stripper (750-350 MCM) (1)
  • Lockouts Interlock Tabs 1-1/2" Dia (1)
  • Long Nose Plier (2)
  • Long Nose Pliers Side Cutting (2)
  • Long Nose Side Cut Plier (2)
  • Long Nose Side Cut Pliers, 7-1/2" L (1)
  • Magnetic Hanger (2)
  • Master Electricians Hole Cutter Kit (1)
  • Mid-Flex Glow Rod Set (2)
  • Multi-Bit Screwdriver and Nut Driver (5)
  • Multi-Bit Screwdriver Square 1-1/4" (1)
  • Multi-Groove Fish Tape, 200 FT (1)
  • Nine-Key Inch Folding Hex Key Set (1)
  • Non-Contact Volt Tester/Thermometer (1)
  • Non-Contact Voltage Tester (3)
  • Nut Driver (1)
  • Nut Driver Cushion-Grip (1)
  • Nut Driver Set (4)
  • Nut Driver Sets (2)
  • Phillips Screwdriver (3)
  • Phillips-Tip (3)
  • Phone Holder (3)
  • Phone Holder with Belt Clip (3)
  • Pocket Knife (2)
  • Pocket Knife 2-1/4" Coping Blade (1)
  • Pocket-Sized Knife Sharpener (1)
  • Power Conduit Reamer (1)
  • Power Nut Driver Set, PK 3 (1)
  • Powerline™ 18 Pocket Tool Pouch (1)
  • Pro Folding Hex Key Set (1)
  • Pump Plier (3)
  • Quick-Rotating (2)
  • Ratcheting PVC Cutter (1)
  • Receptacle Tester (2)
  • Replacement Bit (3)
  • Replacement Bits, #2 PH, #1 SQ (1)
  • Replacement Bits, #2 SQ, 3/16" SL (1)
  • Replacement Bits, Square, #1, #2 (1)
  • Replacement Blade (1)
  • Replacement Plier Handle (2)
  • Replacement Tap (1)
  • Replacement Tap For 625-32, 627-20 (1)
  • Scissors and Knife Holder W/ Loop (1)
  • Screwdriver (2)
  • Screwdriver And Nutdriver (2)
  • Screwdriver Cushion-Grip 7" (1)
  • Screwdriver Set (2)
  • Screwdriver, Insul, #3 PH, 7" L (1)
  • Screwdriver, Insulated 3/16" Cab 7" (1)
  • Screwdriver, Insulated, 1/4" Cab 4" (1)
  • Screwdriver/Nut Driver (2)
  • Self-Leveling Cross-Line Laser Level and Plumb Spot (1)
  • Serrated Duct Knife (1)
  • Side Cut Stripping Crimping Pliers (1)
  • Side Cutting Plier (1)
  • Side Cutting Pliers (1)
  • Slim-Jaw Adjustable Wrench, 4" (1)
  • Slim-Jaw Adjustable Wrench, 6" (1)
  • Slim-Jaw Adjustable Wrench, 8" (1)
  • Spring-Assisted Open Pocket Knife (1)
  • Stand Up Zipper Bags 2 PK (1)
  • Standard Pump Pliers (3)
  • Step Drill Bit (1)
  • Strap (1)
  • Tapping Tool (1)
  • Test Lead Set (1)
  • T-Handle Set With Stand (2)
  • Tool Holders (1)
  • Tool Kit (1)
  • Top-Grain Leather Zipper Bag (1)
  • Torpedo Level (1)
  • Torque Screwdriver Set (1)
  • Tote (2)
  • Tough Box 17-Quart Cooler (1)
  • Tradesman Pro Phone Holder XX-Large (1)
  • Tradesman Pro Tool Master Backpack (1)
  • Tradesman Pro™ Lighted Tool Bag (1)
  • Tradesman Pro™ Tech Bag (1)
  • Tradesman Pro™ Work Light (1)
  • Triple Taps 6-32, 8-32, 10-24 (1)
  • Triple Taps 6-32, 8-32, 10-32 (1)
  • Utility Glove (3)
  • Utility Knife Blade (1)
  • Volt Tester With Laser Dist Meter (1)
  • Wire Crimper, Cutter, Stripper Tool (1)
  • Wire Pulling Foam Lubricant (1)
  • Wire Pulling Glove (2)
  • Wire Stripper (2)
  • Wire Stripper and Cutter (2)
  • Wire Stripper/Cutter (3)
  • Wire Stripper/Wire Cutter (3)
  • Wireless Jobsite Speaker (1)
  • Show More...

• Blade Material

  

  • — (1)
  • 420HC Stainless Steel (1)
  • 440A Stainless Steel (9)
  • AUS 8 Stainless Steel (5)
  • AUS 8 Stainless-Steel (1)
  • Bi-Metal (1)
  • Canvas (1)
  • CARBON STEEL (2)
  • Chrome Vanadium Steel (1)
  • Drop Forged Hardened Tempered Alloy Steel (1)
  • Forged Steel (3)
  • Hardened Carbon Steel (1)
  • Hardened Steel (1)
  • Heavy Duty Steel (1)
  • Induction Hardened Steel (3)
  • Stainless Steel (4)
  • Steel (37)
  • Strong;Tough Tempered Steel (1)
  • Show More...

• Material

  

  • 1095 Steel (1)
  • 1680d Ballistic Nylon, 2520d Ballistic Nylon Bottom (1)
  • 1680d Ballistic Weave (22)
  • 1680d Ballistic Weave Body (1)
  • 1680d Ballistic Weave Body; Hard Molded Polypropylene Bottom (1)
  • 1680d Ballistic Weave, Mesh Interior (1)
  • 1680d Polyester Body; Hard Molded Polypropylene Bottom (2)
  • 440A Stainless Steel (2)
  • 600D Ballistic Weave (1)
  • 600d Nylon (1)
  • 91% Polyester, 5% Thermoplastic Polyurethane, 4% Spandex (1)
  • ABS (2)
  • ABS and Electrical Components (1)
  • ABS Plastic (1)
  • ABS Plastic (Case) (1)
  • ABS, Polycarbonate (1)
  • ABS, Steel (1)
  • Adjustable web belt (1)
  • ALLOY STEEL (4)
  • Alloy Steel;Reinforced Nylon (1)
  • Alloy Steel;Steel (3)
  • Aluminum (8)
  • Canvas (1)
  • Carbide (3)
  • Carbon Steel (1)
  • Cast Alloy (1)
  • Cast Zinc Alloy (1)
  • CHROME VANADIUM STEEL (1)
  • Cordura® (1)
  • Cordura® Ballistic Nylon (2)
  • Cordura® Camouflage (1)
  • Cordura® Fabric (1)
  • Denier Polyester (1)
  • FABRIC (6)
  • Fiberglass (9)
  • Forged Steel (4)
  • Hardened Steel (3)
  • HEAT TREATED STEEL (1)
  • Heat-Treated Alloy Steel (1)
  • Heavy duty canvas (1)
  • High Speed Steel (9)
  • Induction Hardened Steel (16)
  • IRON (1)
  • Iron;Steel(Handle) (1)
  • LEATHER (10)
  • Magnesium Cast (1)
  • Neodymium Alloy (1)
  • Neoprene Impregnated Nylon (1)
  • No. 10 Canvas (2)
  • No. 10 Canvas with Brass Zipper (1)
  • No. 4 Canvas with Leather Back (1)
  • NO. 6 CANVAS (1)
  • No. 8 Canvas (2)
  • Nylon (1)
  • PC & PC-ABS housing and electronic components (1)
  • PC/ABS (5)
  • PC/ABS Housing with Electronic Components (1)
  • Plastic (4)
  • Plastic and Electronic Assemblies (1)
  • Plastic Case with Steel Blade (4)
  • Plastic Handle with Rubber Grips (1)
  • Plastic Housing, Electronic Compenents (1)
  • Plastic Housing, PCB with Electronic Components (2)
  • Plastic/Electronics (3)
  • Polyester (3)
  • Powder Metal (1)
  • PVC (1)
  • PVC Coated Polyester (1)
  • Robust Forged Steel (1)
  • S2 Steel (1)
  • Spandex (1)
  • Stainless Steel (6)
  • Stainless Steel Probe (1)
  • Stainless steel/Nylon Resin (1)
  • Stainless Steel;Hard Plastic;Rubber (1)
  • Steel (126)
  • Synthetic Leather (5)
  • Tempered Steel (1)
  • Thermocouple Wire with PVC Connector (1)
  • Thermoplastic; Electronics (1)
  • TOP GRAIN LEATHER (1)
  • Show More...

• Application

  

  • #8 AWG Copper, Aluminum and Other Soft Metals (1)
  • #8 AWG Copper, Aluminum and Other Soft Metals and Crimps Non-insulated Connectors, Lugs, and Terminals (1)
  • #8 AWG Copper, Aluminum and Other Soft Metals, 1/8" or 1/4" (3.2 or 6.4 mm) Flat Steel Fish Tape (1)
  • 10 - 20 AWG, 12 - 22 AWG (1)
  • 10 Piece Sae Ball-End Journeyman T-Handle Set With Stand (1)
  • 10-12 Solid and 12-14 Stranded Wire;Noninsulated Connectors;Lugs and Terminals (1)
  • 10-in-1, 11-in-1 and 10-Fold™ Screwdriver/Nut Drivers (2)
  • 16 AWG (1)
  • 5/8" (15.9 mm) Pole Line and Hardware Bolts, Threaded Rods (1)
  • 8-16 AWG Solid and 10-18 AWG Stranded Wire (2)
  • Accurate Targeting and Temperature Measurement (1)
  • ACSR, Screws, Nails, Most Hardened Wire (11)
  • ACSR, Screws, Nails, Most Hardened Wire; Crimps Noninsulated Connectors, Lugs and Terminals (1)
  • ACSR, Screws, Nails, Most Hardened Wire; Crimps Noninsulated Connectors, Lugs and Terminals; Pulls Steel Fish Tape (1)
  • ACSR, Screws, Nails, Most Hardened Wire; Pulls 1/8" or 1/4" (3.2 or 6.4 mm) Flat Steel Fish Tape (1)
  • All Purpose (1)
  • Alternative 45 Degree Mounting for Flush Cutting (1)
  • Aluminum;Brass;Copper;Plastic and Up to 10 Gauge Metal (1)
  • Ambient and Direct-Contact Temperature Readings (1)
  • Bolt Applications (13)
  • Burr-Free PVC Cutting (1)
  • Cable Cutting in Confined Spaces (1)
  • Cable Cutting, Stripping, Deburring (1)
  • Cable Stripping (2)
  • Calibrated for Drywall, Masonry, Hardwood, Softwood Only (1)
  • Carbon Monoxide Detector (1)
  • Check for and find the true vertical and horizontal (1)
  • Check for and find the true vertical and horizontal;Transfer angles between surfaces with adjustable vial (1)
  • Class C (2)
  • Class E (3)
  • Coats Better and is 30% More Slippery Than Gel or Wax Lubricants (1)
  • Conduit and Pipe (2)
  • Conduit Bending (1)
  • Crimps Noninsulated Connectors, Lugs, and Terminals (1)
  • Crimps Non-Insulated Solderless Terminals and Connectors (1)
  • Crimps UR/UY/UG Insulation Displacement Connectors (IDC)- Scotchlok Type Connectors, Cleanly Strips 23 AWG and 24 AWG Wires (1)
  • Cut and Trim Sheet Metal (1)
  • Cut Quick, Precise Holes in Stainless Steel, Mild Steel, Iron, Copper and Brass Sheet up to 3/16" (0.5 cm) Thick (1)
  • Cuts ACSR, Screws, Nails and Most Hardened Wire (1)
  • Cuts and Crimps Wire 10-22 AWG (1)
  • Cuts and Strips Wires (2)
  • Cuts Holes in Stainless Steel, Mild Steel, Iron, Copper and Brass Sheet up to 3/16" (0.5 cm) Thick (1)
  • Cuts Quick, Precise Holes in Stainless Steel, Mild Steel, Iron, Copper and Brass Sheet up to 3/16 in (5 mm) Thick (3)
  • Cuts;Strips and Loops Wires (2)
  • CUTTING (1)
  • Cutting Copper and Aluminum Cable (1)
  • Cutting Holes in Stainless Steel,Mild Steel, Iron, Copper, and Brass (1)
  • Designed For Greater Capacity in Tight Work Spaces (1)
  • Designed for Telecom and Electrical and Heavy-Duty Use (1)
  • Designed to withstand impact drills (10)
  • Designed to Work with Ties Rated at 120 to 250 lbs (1)
  • Determine Wiring Condition in Outlet (1)
  • Each Tap Size Rethreads to Next Larger Size If Threads Are Stripped. (2)
  • Easily Cuts 3/8" Flexible Conduit;#10,12,14 Armored Cables with Up to 4 Wires with a Couple of Turns of the Handle (1)
  • Electrical (3)
  • Electrical Metallic Tubing (EMT) (4)
  • Electricians (4)
  • Electrician's Previous Generation Multimeters (1)
  • Electronics (2)
  • For Aluminum, Brass, Copper, Plastic and Up to 10 Gauge Metal (5)
  • For Cable Cutting in Confined Spaces (1)
  • For Reaching 1/2" (1.3 cm) and 3/4" (1.9 cm) Connectors in Deep or Tight Boxes (1)
  • For Skin and Hand Cleansing (1)
  • For Work Near Energized Sources (7)
  • Form New Threads, Re-form Burred Threads or Clean Out Plaster Obstructions (1)
  • General Purpose (9)
  • General Purpose;Skinning (1)
  • Heat Retention (1)
  • Heavy-Duty Line Work (1)
  • High Strength Steel Handle Features a Swaged End for Inserting Conduit to Correct Overbends Bright Orange Color Handle is Easy to Spot on The Jobsite (1)
  • Holds Multimeters and Clamps (1)
  • Hole Making in Wood, Plastic, Mild and Stainless Steel (1)
  • HVAC (6)
  • Intermediate Risk (2)
  • Knife Storage (1)
  • Large Cable Stripping (1)
  • Light (1)
  • Light Duty Task (1)
  • Linear Measurement (1)
  • Linear Measurment (3)
  • Locate Circuit Breakers in Panel, Test GFCI Devices (1)
  • Long Bolt and Stud Applications (1)
  • Long Bolts, Studs or Threaded Rod (2)
  • Lunch, Food Cooler (2)
  • Magnetizing / Demagnetizing Screwdrivers (1)
  • Measure Voltage and Continuity and Ensure GFCI Devices are Functioning Properly (1)
  • Measures AC Current (4)
  • Measures AC Current, AC/DC Voltage, Continuity, Resistance (1)
  • Measures AC/DC Voltage (2)
  • Measures Current (1)
  • Measures Current to 2000A AC/DC (1)
  • Measures Illuminance Levels in Foot Candles (FC) and Lux (1)
  • Multi Purpose (2)
  • Multi-Material Drilling (2)
  • Multi-Purpose Cutting (1)
  • Non Ferrous Wire and Soft Metal Cutting (1)
  • Non-Contact Detection and Testing of AC Voltage with Integrated Laser Distance Meter (1)
  • Non-Contact Detection of Voltage in Cables, Cords, Circuit Breakers, Lighting Fixtures, Switches, Outlets, and Wires (1)
  • Nut Driving (1)
  • Nut Driving on Unlimited Bolt Lengths (4)
  • Penetration Cuts and Hole Making (1)
  • Phone Storage (6)
  • Pick-up Tool (1)
  • Piercing;Slicing (1)
  • Pole;Tree Climber (1)
  • Precision Wire Cutting (1)
  • Provides Non-Contact Detection of AC Voltage;Doorbells;Thermostats;Low Voltage Lighting;Irrigation Systems (1)
  • PVC/Plastic Tube Cutting (1)
  • Reinforced Thumb and Finger Panels (1)
  • Repair and Restore Fiberglass Fish Tapes (1)
  • Replaceable Hook-Jaw Blades Grab and Hold Cable While Shear-Cutting Action Makes Clean Cuts;Not Designed for Cutting Steel or ACSR (1)
  • Replacement Bit (1)
  • Replacement for 626 and 627-20 (1)
  • Replacement Part for 4-in-1 Electronics Screwdriver (Cat. No. 32581) (1)
  • Reversible Thumb Stud Provides Easy One-Handed Opening (1)
  • RT310 is an electrical outlet tester that tests for wiring faults in electrical outlets, and Tests AFCI and GFCI Devices (1)
  • Scotchlok UG, UR and UY connectors (1)
  • Security;Entertainment;Communications;Environmental Control;Irrigation Systems (1)
  • Sharpen Knife and Scissors (1)
  • Side Cutting (1)
  • Side Cutting; Stripping (1)
  • Side Cutting; Stripping; Crimping (1)
  • Skinning Small Wire and Cable, General Use (1)
  • Small Part Accessibility and Storage (1)
  • Soft Metal Tube Cutting (1)
  • Specifically Designed for Locking Out Power Sources such as Disconnects, Switches, and Panel Boxes (1)
  • Splinter Guard Allows you to Work Pain-Free and Glove-Free;Maintain Complete Dexterity Whether Installing Wires above Ceilings, in Attics, Through Walls, in Crawl Spaces, Under Carpets or Raised Floors (1)
  • Stacked Circuit Boards, Long Bolt Applications (1)
  • Storage (1)
  • Strip (10-14 SLD)(12-16 STR), Bolt Shear #6-32 and #8-32, Crimps Non-Insulated Connectors, Lugs and Terminals, Cuts Screws, Nails and Most Hardened Wire (1)
  • Stripping Six Standard Wire Size without Nicking Wires (1)
  • Strips 12 AWG Wires (2)
  • Stub UPS;Offsets;Back-To-Back Saddle Bends and Other Bends (1)
  • Tapered Nose Design for Working in Confined Spaces (1)
  • Temperature Measurement via IR (Infrared) and Probe (1)
  • Temperature Measurements Using IR Emission or K-Type Probe (1)
  • Test AC/DC Voltage From 12-600V (1)
  • The 17 In(432 mm) Case Diameter Means You Can Reel In 10% More Tape In A Single Revolution Vs. A 16 In(406 mm) Case. (1)
  • The Lightweight and Strong Fiberglass Composite Tape Resists Harsh Elements and is Strength Rated up to 500 Pulling Pounds. (1)
  • Three 3/16 In (5 mm) Diameter X 5 In (1.52 M) Glow Rods Assemble to A Full 15 In (4.57 M). (1)
  • Tight Wrench-Over-Wrench Applications (3)
  • Tightening (2)
  • To Perform Variety of Piercing and Punching Jobs (1)
  • Tool Carrying (2)
  • Tool Storage (2)
  • Tools, Meters, Small Parts and Tech Devices (2)
  • Tough Applications (1)
  • Turning Fasteners (3)
  • Use with Power Impact Drivers (1)
  • Wire Crimping, Stripping and Cutting (1)
  • Wire Cutting;Stripping (1)
  • Wire Cutting;Stripping and Twisting Plus Bolt Shearing (1)
  • Wire Pulling (2)
  • Wire Stripping and Cutting (8)
  • Wire Stripping, Cutting and Crimping (1)
  • Work Near Energized Sources (1)
  • Work on Up To 9/16" (1.4 cm) O.D. Wire (1)
  • Working on Stacked Circuit Boards or Other Long Bolt Applications (1)
  • Show More...

• Accuracy

  

  • +/- (2% + 2V) (1)
  • +/- 0.029° (7)
  • +/- 4° F or +/- 2%; Accuracy Below Freezing is +/- 4° F Plus 0.2 Degrees Per Degree Below 32° F (1)
  • +/-4% (1)
  • ±3/32" per 33' (±2 mm per 10 m) Vertical & Horizontal Beams, ±1/8" per 33' (±3 mm per 10 m) Plumb Up Spot, ±5/32" per 33' (±4 mm per 10 m) Plumb Down Spot (1)
  • 1/16" from 2" to 32.8'; 1/8" from 32.8' to 65.6' (1)
  • -40 to 0° C: +/-2°; 1 to 300° C: +/- 1°C (1)
  • Approximately 70 to 100% of Indicated Voltage, Except for 2V DC (84 to 100%) and >17V DC (94 to 100% of 17V) (1)
  • IR: 32° F and Above: +/- 3° F or +/- 1.5% (Whichever is Greater); Less Than 32° F: +/- (3.6° F + 0.2° F per Degree); K-Type: 32° F and Above: +/- 2° F or +/-% (Whichever is Greater); Above 32° F: +/- 3° or +/1% (Whichever is Greater) (1)
  • Room Temperature Accuracy of +/- 2.7°F (+/- 1.5°C) (1)
  • Typically at >90% of the Indicated Range (Except for 24V AC / 32V DC, >95% of Range) (1)
  • Show More...

• Blade Length

  

  • — (1)
  • 0.625 in;15.9 mm (Knief Length) (1)
  • 0.75 in;19.05 mm (1)
  • 0.781 in (Knife);19.8 mm (Knife) (1)
  • 1.5" (3.8 cm) (1)
  • 1/2 in;12.7 mm (Knief Length) (2)
  • 12 in;304.8 mm (1)
  • 1-3/4 in;44.5 mm (1)
  • 16 ft (1)
  • 2.0" (4.9 cm) (1)
  • 2.25" (5.7 cm) (3)
  • 2.5 in;63.5 mm (2)
  • 2.563" (6.5 cm) (1)
  • 2.625" (6.7 cm) (1)
  • 2.8 in;71 mm (1)
  • 2-1/2 in;63.5 mm (3)
  • 25/32 in;19.8 mm (Knief Length) (6)
  • 25/32 in;20 mm (Knief Length) (2)
  • 2-5/8 in;66.7 mm (1)
  • 2-7/16 in (61.9 mm) x 0.025 in (0.6 mm) (1)
  • 3.375" (8.6 cm) (1)
  • 3.4" (8.6 cm) (1)
  • 3.5" (8.9 cm) (2)
  • 3.75" (9.5 cm) (1)
  • 3-1/2 in;89 mm (2)
  • 4 to 8 in (1)
  • 5.2" (13.2 cm) (1)
  • 5.5" (14 cm) (1)
  • 5/8 in;15.9 mm (Knief Length) (4)
  • 6 in;152.4 mm (3)
  • 6" (15.2 cm) (2)
  • 7 in (1)
  • 9 in;228.6 mm (2)
  • Show More...

• Handle Material

  

  • 1680D Ballistic Weave (4)
  • Aluminum (3)
  • Aluminum Die Cast (1)
  • Anodized Aluminum (8)
  • Canvas (2)
  • Contoured Plastic Over Hardened Steel (1)
  • Cordura(R) Camouflage (1)
  • Cushion Grip (2)
  • Cushion Grip Handle (2)
  • Double Dipped (1)
  • Fiberglass (2)
  • Hardened Tool Steel (1)
  • Heavy-Duty Rubber (2)
  • High-Dielectric Plastic (9)
  • Journeyman (2)
  • Nylon Resin (1)
  • Nylon/Rubber (1)
  • Plastic (10)
  • Plastic Dipped Steel (8)
  • Plastic Grip (2)
  • Plastic-Dipped Steel (1)
  • Polyester (1)
  • Rubber (39)
  • Rubber, High-Dielectric Plastic (1)
  • Stainless Steel (3)
  • Steel (5)
  • Strong, Tough, Tempered Steel (1)
  • TPE/Steel (1)
  • Show More...

• Cutting Capacity

  

  • #14 to #10 AWG (Solid);#16 to #12 AWG (Strand) (1)
  • #19 to #23 AWG (2)
  • 1 in (1)
  • 1" (2.5 cm) O.D. Multilayer Plastic Tubing and Up To 3/4" (1.9 cm) Schedule 40 PVC (1)
  • 1/8" to 5/8" (0.3 to 1.6 cm) (1)
  • 10 Solid or 12 Stranded (1)
  • 10-18 AWG Stranded (1)
  • 10-22 AWG Insulated and Non-Insulated Terminals (2)
  • 10-22 AWG Non-Insulated Terminals (1)
  • 1-1/2 in;38 mm (1)
  • 1-3/16 in (1)
  • 1-3/8 in (1)
  • 1-3/8 in;34.9 mm (1)
  • 1-3/8 in;34.9 mm (Diameter) (1)
  • 1-5/16 in;33.3 mm (1)
  • 18 gauge Steel and 22 gauge Stainless Steel (1)
  • 2-1/8 in;54 mm (2)
  • 3/4 in (2)
  • 3/8 in (Flexible Conduit);#10;#12;#14 (Armored Cable) (1)
  • 4/0 (Aluminum);2/0 (Soft Copper);24 AWG (100-Pair Communications Cable) (1)
  • 4/0 Aluminum;2/0 Soft Copper;100-Pair 24 AWG Communications Cable (1)
  • 5/16 in;23.8 mm (1)
  • 6 in (Pipe) (1)
  • Copper:600 MCM;300 sq.mm;Aluminum:750 MCM;380 sq.mm;Communication Cable:1-1/8 in;28.6 mm (1)
  • Show More...

• Frequency Rating

  

  • 1 Hz to 500 kHz (2)
  • 50 Hz;60 Hz (1)
  • 50 to 500 Hz (3)
  • Show More...

• Handle Color

  

  • — (2)
  • Black (48)
  • Black and Yellow (2)
  • Black/Orange (1)
  • Black/Red (2)
  • Blue (11)
  • Blue or Black (1)
  • Blue or White (1)
  • Blue or Yellow (2)
  • BLUE/BLACK (1)
  • Blue/Gray (1)
  • Blue/Red (2)
  • Camouflage (1)
  • Camouflage Design (1)
  • Chrome (3)
  • dark blue (2)
  • DARK BLUE/BLACK (1)
  • Glow in the Dark (1)
  • Glow-in-the-Dark (3)
  • GRAY (1)
  • Gray/Black (1)
  • Gray/Yellow (1)
  • Light Blue (4)
  • LIGHT BLUE/BLACK (6)
  • light red (2)
  • Orange/Black (2)
  • Red (12)
  • Red or Black (1)
  • RED/BLACK (3)
  • Silver (3)
  • Silver with Wood (1)
  • Transparent Red (5)
  • Wood Grain (2)
  • Yellow (21)
  • Yellow or Black (1)
  • Yellow or White (1)
  • YELLOW/BLACK (29)
  • Show More...

• Cutting Material

  

  • Aluminum;Fiberglass;Plastic (1)
  • Copper (1)
  • Copper:500;Aluminum:750 (Cable) (1)
  • Jab Saw;Cuts Drywall;Wallboard;Plywood;and Plastic (1)
  • PVC (1)
  • Wood;Plastic;Stainless Steel;Mild Steel;Drywall;Ceiling Tile and Laminate Cut Material (1)
  • Show More...

• Drive Type

  

  • Hex (1)
  • Square-Shank (1)
  • Show More...

• Number Of Blades

  

  • 1 (3)
  • 3 (1)
  • 6 (1)
  • Show More...

• Handle Type

  

  • — (1)
  • Bender Head (1)
  • Black Plastic (1)
  • Black Powder Coat on Alloy (1)
  • Color-Coded Handles (3)
  • Curved (1)
  • CUSHION GRIP (21)
  • Cushion-Grip (6)
  • Double Dipped for Comfort Grips (3)
  • Dual-Material Journeyman Grip (2)
  • Ergonomic (1)
  • Folding Pocket Style (1)
  • Handle Grips for Comfort (1)
  • Lightweight (2)
  • Nut Type Utility (1)
  • Plastic Contoured Grip (1)
  • Plastic Covered Cushioned Handles (1)
  • Plastic Dipped (1)
  • Plastic-Covered Cushioned Handles (1)
  • Plastic-Covered Handles (1)
  • Skeleton (2)
  • Slim (4)
  • Soft Touch Grip (1)
  • Ultra-comfortable hand grip (1)
  • Show More...

• Color

  

  • Black (23)
  • Black (Handle) (23)
  • Black and Orange (3)
  • Black and Red (Handle) (2)
  • Black with Gray and Orange Trim (2)
  • Black with Orange/Gray (3)
  • Black, Gray, Orange Trim (1)
  • Black, Reflective Gray, Green Accents (1)
  • Black/Gray (3)
  • Black/Orange (4)
  • Black/Orange Piping (1)
  • Black/Orange/Gray (4)
  • Black;Red;Yellow;Green;Blue;Brown (handle) (2)
  • Black;Reflective Grey;Green Accents (1)
  • Black;Yellow (Handle) (1)
  • Blue (1)
  • Blue/Black (Handle) (1)
  • Brown (4)
  • Camouflage (5)
  • Camouflage (Handle) (1)
  • Camouflage/Black (1)
  • Dark Blue (Handle) (1)
  • Dark Blue/Black (Handle) (1)
  • Glow (Handle) (1)
  • Glow in the Dark (1)
  • Glow in the Dark (Handle) (1)
  • Gray with Orange (1)
  • Gray/Black (1)
  • High-Visibility Orange (1)
  • Light Blue (Handle) (1)
  • Light Blue/Black (Handle) (4)
  • Light Red (Handle) (1)
  • Maroon (2)
  • Natural (2)
  • Natural/Brown (2)
  • Olive;Orange;Royal Blue;Yellow (1)
  • Orange (2)
  • Orange (Case) (1)
  • Orange and Black (Handle) (1)
  • Orange, Black, Gray (1)
  • Orange/Black; Gray/Black (1)
  • Orange;Black (1)
  • Red (Handle) (2)
  • Red;Black (Handle) (3)
  • Red;Gray;Black;Brown (1)
  • Royal Blue (1)
  • Silver (2)
  • Silver (Handle) (3)
  • Solid Blue (Handle) (1)
  • Tan (3)
  • Transparent Red (Handle) (2)
  • White (1)
  • Yellow (Handle) (9)
  • Yellow and Black (Handle) (2)
  • Yellow/Black (2)
  • Yellow;Black (1)
  • Yellow;Black (Handle) (10)
  • Show More...

• Jaw Type

  

  • Flat (2)
  • Knurled (2)
  • Narrow Nose Fits into Tight Places (3)
  • Round - Serrated (1)
  • Serrated Nose Jaws to Bend, Shape, or Pull Wire;Holes for Looping Wire Ends (1)
  • Strong-Gripping Serrated Nose for Easy Bending, Shaping, and Pulling Of Wire (2)
  • Show More...

• Ac Current

  

  • 400 A (1)
  • 600 A (2)
  • Show More...

• Voltage Rating

  

  • 1000 V ac/dc (2)
  • 110/125 V ac (1)
  • 12 to 1000 V ac (2)
  • 50 to 1000 V ac (1)
  • 600 V ac/dc (1)
  • Show More...

• Teeth Per Inch

  

  • 10 (1)
  • 18 (2)
  • 24 (3)
  • 8 (2)
  • Show More...

• Tip Size

  

  • #0 (1)
  • #0;#00 (Phillips Bits);1/8 in;3/32 in (Slotted) (1)
  • #1 (3)
  • #1, #2 (Philips Bits);1/4 in;3/16 in (Slotted Bits);#1, #2 (Square Bits);3/8 in (Hex Bits) (1)
  • #1, #2 (Phillips Bits);1/4 in (6.4 mm), 3/16 in (4.8 mm) (Slotted Bits); (1)
  • #1, #2 (Phillips Bits);1/4 in (6.4 mm), 3/16 in (4.8 mm)(Slotted Bits);#1, #2(Square Bits);T10, T15(Torx(R) Bits) (1)
  • #1, #2 (Phillips Bits);1/4 in(6.4 mm), 3/16 in (4.8 mm) (Slotted Bits) (1)
  • #1, #2 (Phillips Bits);1/4 in(6.4 mm), 3/16 in (4.8 mm) (Slotted Bits);#1, #2 (Square Bits);3/8 in (Hex Bit) (1)
  • #1, #2 (Phillips Bits);3/16 in (4.8 mm);1/4 in (6.4 mm) (Slotted Bits) (1)
  • #1, #2 Square (1)
  • #2 (12)
  • #2 (Phillips Bits);1/4 in;6.4 mm (Slotted Bits);#1, #2 (Square Bits) (1)
  • #2 Phillips and 1/4" (6.4 mm) Slotted, #1 Phillips and 3/16" (4.8 mm) Slotted, #1 and #2 Square (1)
  • #2;1/4 in (2)
  • #3 (2)
  • (8) screwdrivers:#1 ph, #2 ph, 1/4 in slotted, 3/16 in slotted, T10 Torx, T15 Torx, #1 Square-Recess, #2 Square-Recess (2) Nut Drivers:5/16 in, 1/4 in (1)
  • 1/16" (1)
  • 1/20 in;1/16 in;5/64 in;3/32 in;7/64 in;1/8 in;9/64 in;5/32 in (1)
  • 1/4 in;6.4 mm (4)
  • 1/4 in;6.4 mm (Slotted) (1)
  • 1/4" (6.4 mm) (6)
  • 1/4", 5/16" (3)
  • 1/4, 5/16 (1)
  • 1/8 in;3.2 mm (2)
  • 1/8" (3.2 mm) (2)
  • 12 in;12.7 mm (1)
  • 3/16 in;4.8 mm (3)
  • 3/16 in;4.8 mm (Slotted Replacement Bits) (1)
  • 3/16 in;4.8 mm;1/4 in;6.4 mm (Slotted Tip) (1)
  • 3/16 in;7/32 in;1/4 in;5/16 in;3/8 in (1)
  • 3/16" (4.8 mm) (5)
  • 3/32 in;2.4 mm (1)
  • 3/8 in;10 mm (1)
  • 3/8" (9.5 mm) (1)
  • 5/16 (0.8 cm)Weight8 oz (227 g) AD6.027720201103C092644852763000926448527638527627111728Brand NameKlein ToolsIncluded7 Screwdrivers, #1 Phillips, #2 Phillips, 1/4, 5/16", 1/8 (6.4 mm to 3.2 mm) Cabinet Tip 3" (76.2 mm) Shank, 1/8 (3.2 mm) Cabinet Tip 4" (101.6 mm) Shank, 1/8 (3.2 mm) Cabinet Tip 6" (152.4 mm) Shank, and CaseNumber of Pieces7Weight1.1 lb (0.5 kg) AD6.027720201103C092644854842000926448548428548427111728Brand NameKlein ToolsIncluded604-3, 606-2, 607-3 and 608-3InsulatedNoMagneticN0Sub BrandCu (1)
  • 5/16 in;7.9 mm (4)
  • 5/16" (7.9 mm) (1)
  • 5/32" (4 mm) (1)
  • 5/64 in;3/32 in;7/64 in;1/8 in;9/64 in;5/32 in;3/16 in;7/32 in;1/4 in (1)
  • Show More...

• Functions

  

  • AC Current, AC/DC Voltage, Continuity, Resistance (1)
  • Audible Continuity, Capacitance, Diode Test, Frequency & Duty Cycle, Min/Max feature, Data Hold capability, Inrush Current, Low Impedance (1)
  • Auto-range, Hold, Max/Min Value, Auto-power Off (1)
  • Clamp measures AC current and thermocouple probe measures temperature. Test leads measure AC/DC voltage, resistance, continuity, frequency and capacitance and tests diodes (1)
  • Clamp measures AC current; Test leads measure AC/DC voltage, resistance, continuity and tests diodes (1)
  • Test leads measure AC/DC voltage, resistance, continuity, frequency and capacitance and tests diodes. Thermocouple probe measures temperature. (1)
  • Twisting;Grabbing;Looping (1)
  • Show More...

• Handle Length

  

  • — (1)
  • 1.85" (47 mm) (1)
  • 2.5" (6.4 cm) (1)
  • 3 (1)
  • 3.05" (7.7 cm) (1)
  • 3.063" (7.8 cm) (1)
  • 3.1" (7.9 cm) (1)
  • 3.43" (8.7 cm) (2)
  • 3.5 in (1)
  • 3.54" (9 cm) (1)
  • 3.625" (9.2 cm) (1)
  • 3.72" (9.4 cm) (1)
  • 3.74" (9.5 cm) (1)
  • 3.75" (9.5 cm) (1)
  • 3.81" (9.7 cm) (1)
  • 38 in;965.2 mm (1)
  • 4.03" (10.2 cm) (4)
  • 4.09" (10.4 cm) (1)
  • 4.2" (10.7 cm) (1)
  • 4.25 (1)
  • 4.31 (10.9 cm)Handle MaterialRubberInsulatedYesMagneticNoMaterialSteel, PlasticOverall Height1.24 (3.2 cm) (1)
  • 4.313" (11 cm) (1)
  • 4.313" (109.6 mm) (1)
  • 4.375" (11.1 cm) (1)
  • 4.406 in;111.9 mm (1)
  • 4.45" (11.3 cm) (2)
  • 4.47" (11.4 cm) (1)
  • 4.48" (11.4 cm) (1)
  • 4.51" (11.5 cm) (1)
  • 4.55" (11.6 cm) (1)
  • 4.7" (11.9 cm) (3)
  • 4.73" (12 cm) (3)
  • 4.74" (12 cm) (2)
  • 4.75 (1)
  • 4.75" (12.1 cm) (2)
  • 4.8" (12.2 cm) (3)
  • 5.22" (13.3 cm) (1)
  • 5.281" (13.4 cm) (1)
  • 5.313 (1)
  • 5.375" (13.7 cm) (1)
  • 5.41" (13.7 cm) (8)
  • 5.5 (1)
  • 5.5" (14 cm) (1)
  • 5.5" (14 cm) (1)
  • 5.55" (14.1 cm) (6)
  • 5.58" (14.2 cm) (1)
  • 5.69" (14.5 cm) (1)
  • 5.75" (14.6 cm) (1)
  • 6.31" (16 cm) (1)
  • 6.5" (16.5 cm) (1)
  • 6.63" (16.8 cm) (1)
  • 7.64" (19.4 cm) (1)
  • Show More...

• For Use With

  

  • 10-in-1 Screwdriver Driver (32477);11-in-1 Screwdriver Driver (32500);10-Fold(TM) (2)
  • 10-in-1, 11-in-1 and 10-Fold™ (1)
  • 1-1/4" Bender Head (Cat. No. 56211) (1)
  • 11-in-1 and 11-in-1 Magnetic Multi-Bit Screwdriver / Nut Drivers (Cat. Nos. 32500, 32500-MAG) (1)
  • 3/4 (19.1 mm) and LargerOverall Length54 (137.2 cm) (1)
  • 31906 (1)
  • 32559 (Extended Reach) (1)
  • 4-in-1 Electronics Screwdriver (32581, 32585) (2)
  • 93116 (1)
  • All Klein Meter;Multimeter;Clamp Meter (1)
  • Any Clamp or Digital Multimeter that Measures Temperature (2)
  • Cable Skinning Utility Knife (44218) (1)
  • Cables;Cords;Circuit Breakers;Lighting Fixtures;Switches;Outlets;Wires (3)
  • Cat. No. 32751 and 32708 (1)
  • Cat. No. 56009, 56010 & 56014 (1)
  • Cat. Nos. 625-32, 626, 627-20 (1)
  • Cat. Nos. 626, 627-20 (1)
  • Cell Phones with Cases up to 6.25" x 3.5" x 0.75" (15.88 x 8.89 x 1.9 cm) (2)
  • Cell Phones with Cases up to 7" x 3.75" x 0.75" (17.78 x 9.53 x 1.9 cm) (1)
  • Clamp (3)
  • Digital Circuit Breaker Finders Cat. Nos. ET300, ET310 (1)
  • Extended Reach (32559) (1)
  • Fish Tape (1)
  • Fit into Power Drill Chucks and Quick Release Adapters (1)
  • For 7 in (1)
  • For 8 to 9 in (1)
  • For use with Klein Tools MM300;MM400;MM600;MM700 Multimeters;CL600;CL700;CL800 Clamp Meters (1)
  • Heavy Duty (32557) and Ratcheting (32558) (1)
  • Impact Drivers (1)
  • iPhone 6, 7, 7s, 8, X, Samsung Galaxy® S3, S4, S7, and similar sized phones (1)
  • iPhone 6, 7, 7s, 8, X;Samsung Galaxy(R) S3, S4, S7 (1)
  • Klein Cable-splicer's Knife (1)
  • Klein Electrician's Scissors and Cable-splicer's Knife (1)
  • Klein Tools Clamp Meters, Digital Multimeters, and other Test and Measurement Products (1)
  • Klein Tools Large Cable Strippers (Cat. Nos. 21050 and 21051) (1)
  • Meters;Testers;Infrared Guns;Borescopes and Tools;iPhone 4, 5 (1)
  • Meters;Testers;Infrared Guns;Borescopes and Tools;iPhone 6, 7, 7s, 8, X;Samsung Galaxy(R) S3, S4, S7 (1)
  • MM1000, MM1300, MM2000, MM2300 (1)
  • Smart Phones;Tablets;Computers;Other Audio Devices (1)
  • Standard and GFCI Receptacle (1)
  • Tool Belts (3)
  • Show More...

• Finish

  

  • Black Oxide (2)
  • Black Phosphate (1)
  • Chrome Plated (1)
  • Chrome Plated (Shaft) (1)
  • Chrome-Plated (1)
  • Heavy-Duty, Oversized, Plastic-Dipped (Handle) (1)
  • Journeyman (1)
  • Journeyman (Handle) (13)
  • Matte (1)
  • Plastic Dipped (Handle) (17)
  • Polished Black Oxide (1)
  • Polished;Black Oxide;Plastic-Dipped (Handle) (1)
  • Sand Blast with Oil Rub (1)
  • SATIN (2)
  • Steel (1)
  • Show More...

• Cable Type

  

  • MTW/THHN/THWN-2 (2)
  • NM-B (1)
  • Solid;Stranded (1)
  • Show More...

• Overall Length

  

  • 0.88" (2.2 cm) (1)
  • 0.9" (2.3 cm) (1)
  • 1" (2.5 cm) (5)
  • 1.25" (3.2 cm) (1)
  • 1.265 in (2)
  • 1.29" (3.3 cm) (1)
  • 1.469" (3.7 cm) (1)
  • 1.5 (3.8 cm)Package Quantity6Style_Name6-PackWeight1.0 oz (27 g) AD6.027720201103C092644561191000926445611915611927113101Brand NameKlein ToolsDiameter0.578 (1.5 cm) (1)
  • 1.5 in (1)
  • 1.5 in;38.1 mm (3)
  • 1.62" (4.1 cm) (2)
  • 1.8" (4.6 cm) (2)
  • 1.8" (4.6 cm) (1)
  • 1.96" (5 cm) (1)
  • 10 in;254.0 mm (2)
  • 10" (25.4 cm) (3)
  • 10.063" (25.6 cm) (1)
  • 10.125 (1)
  • 10.25 (1)
  • 10.25" (26 cm) (1)
  • 10.25" (26 cm) (4)
  • 10.313 (3)
  • 10.39" (26.4 cm) (1)
  • 10.50" (26.7 cm) (1)
  • 10.75" (27.3 cm) (2)
  • 10.781" (27.4 cm) (1)
  • 10.96" (27.8 cm) (With Transmitter docked in Receiver) (1)
  • 10-1/4 in;260.4 mm (2)
  • 10-1/8 in;257 mm (1)
  • 10-11/32 in;262.7 mm (1)
  • 10-15/16 in;277.8 mm (2)
  • 11" (27.9 cm) (1)
  • 11" (27.9 cm) (2)
  • 11.25" (28.6 cm) (2)
  • 11.313 (1)
  • 11.313 in;287.4 mm (1)
  • 11.375 (1)
  • 11.5" (29.2 cm) (3)
  • 11.9" (30.3 cm) (1)
  • 11-5/16 in;287.3 mm (1)
  • 12' (3.7 m) (1)
  • 12 in;304.8 mm (1)
  • 12" (30.5 cm) (4)
  • 12.25 (1)
  • 12.25" (31.1 cm) (1)
  • 12.344" (31.4 cm) (1)
  • 12.35 (1)
  • 12.375" (31.4 cm) (1)
  • 12.5" (31.8 cm) (5)
  • 12.6" (32 cm) (1)
  • 12.875" (32.7 cm) (1)
  • 12-1/2 in;317.5 mm (2)
  • 12-1/2 in;318 mm (2)
  • 12-1/4 in;311.2 mm (1)
  • 12-3/8 in;314.3 mm (1)
  • 13.25" (33.7 cm) (1)
  • 13.375 in;339.7 mm (1)
  • 13.438" (34.1 cm) (1)
  • 13.5" (34.3 cm) (4)
  • 14" (35.6 cm) (3)
  • 14.000000000000000 (1)
  • 14.313 in;363.6 mm (1)
  • 14.5 in;368.3 mm (1)
  • 14.5" (36.8 cm) (1)
  • 14-1/2 in;368.3 mm (1)
  • 15.25" (38.7 cm) (1)
  • 15.5" (39.4 cm) (1)
  • 16-1/4 in;412.8 mm (2)
  • 17.5" (44.5 cm) (2)
  • 1-7/8 to 3 in;47.6 to 76.2 mm (2)
  • 17-7/16 in;443.0 mm (1)
  • 18 (45.7 cm)Size_Name1.5-InchStyle_NameRegular NutTaper Diameter1-1/8 to 1/4" (2.9 to 0.6 cm)Weight3.4 lb (1.5 kg) AD6.027720201103C092644322402000926443224023224027112806Brand NameKlein ToolsApplicationFor Aluminum, Brass, Copper, Plastic and Up to 10 Gauge MetalMaterialHigh Speed SteelShank Type1/4 Hex (1)
  • 19" (48.3 cm) (2)
  • 19-1/2 in;495.3 mm (1)
  • 2" (5.1 cm) (1)
  • 2.12" (5.4 cm) (1)
  • 2.25" (5.7 cm) (1)
  • 2.438" (6.2 cm) (1)
  • 2.5" (6.4 cm) (1)
  • 2.57" (6.5 cm) (1)
  • 2.7" (6.9 cm) (1)
  • 2.73" (6.9 cm) (1)
  • 200 ft;60 m (1)
  • 2-1/8 in;54 mm (1)
  • 2-11/16 to 3-13/16 in;68.3 to 96.8 mm (1)
  • 22" (55.9 cm) (1)
  • 24" (61 cm) (1)
  • 24" (61 cm) (1)
  • 25 ft;7.6 m (1)
  • 25-1/2 in;647.7 mm (1)
  • 28.31" (71.9 cm) (1)
  • 3.07" (8 cm) (1)
  • 3.25 in;82.6 mm (1)
  • 3.25" (8.3 cm) (1)
  • 3.359" (8.5 cm) (1)
  • 3.43" (8.7 cm) (2)
  • 3.438" (8.7 cm) (2)
  • 3.5 (1)
  • 3.5" (8.9 cm) (1)
  • 3.5" (8.9 cm) (6)
  • 3.625" (9.2 cm) (1)
  • 3.75" (9.5 cm) (2)
  • 3.8" (9.7 cm) (1)
  • 3.86" (9.8 cm) (1)
  • 3.875" (9.8 cm) (1)
  • 30 (76.2 cm)Size_Name30-Inch, 3/4-Inch HexStyle_NameStraightWeight3.2 lb (1.5 kg) AD6.027720201103C092644324109000926443241093241027112814Brand NameKlein ToolsFor Use WithExtended Reach (32560)Package Quantity2 BitsTip Type#2 Square; #2 PhillipsWeight2.4 oz (68 g) AD6.027720201103C092644324116000926443241163241127112814Brand NameKlein ToolsFor Use WithExtended Reach (32560)Package Quantity2 BitsTip Type#1 Square; 1/4 (0.6 cm) Slotted (1)
  • 3-13/32 in;86.5 mm (1)
  • 36.45" (92.6 cm) (1)
  • 4" (10.2 cm) (4)
  • 4" to 8" (101.6 to 203.2 mm) (1)
  • 4.45" (11.3 cm) (1)
  • 4.563 (1)
  • 4.656 (2)
  • 40" (101.6 cm) (1)
  • 41" (104.1 cm) (1)
  • 43"(109.2 cm) (1)
  • 47" (119.4 cm) (1)
  • 5" (12.7 cm) (1)
  • 5.24" (13.3 cm) (1)
  • 5.25" (13.3 cm) (2)
  • 5.5" (14 cm) (3)
  • 5.50" (14 cm) (2)
  • 5.67" (14.4 cm) (1)
  • 5.75" (14.6 cm) (2)
  • 5.82" (14.8 cm) (1)
  • 5.83" (14.8 cm) (1)
  • 5.86" (14.9 cm) (1)
  • 51"(129.5 cm) (1)
  • 5-1/4 in;133.4 mm (1)
  • 52" (13.2 cm) (1)
  • 5-3/4 in;146.1 mm (2)
  • 54" (137.2 cm) (1)
  • 6" (15.2 cm) (1)
  • 6" (15.2 cm) (2)
  • 6.06" (15.4 cm) (1)
  • 6.125" (15.6 cm) (2)
  • 6.25 in;159 mm (1)
  • 6.25" (15.9 cm) (1)
  • 6.297 (1)
  • 6.3" (16 cm) (1)
  • 6.313 (2)
  • 6.406 (1)
  • 6.45" (16.4 cm) (1)
  • 6.5 in;165 mm (1)
  • 6.5" (16.5 cm) (2)
  • 6.53" (16.6 cm) (1)
  • 6.625" (16.8 cm) (1)
  • 6.63 (1)
  • 6.68" (17 cm) (2)
  • 6.75 (6)
  • 6.75 in;171 mm (Open Length);6.0 in;152 mm (Closed Length) (1)
  • 6.75 in;171.5 mm (2)
  • 6.75 to 7.3125 (2)
  • 6.75" (17.2 cm) (1)
  • 6.75" (17.2 cm) (3)
  • 6.82" (17.3 cm) (1)
  • 6-1 in;/158.8 mm (1)
  • 6-1/2 in;165.1 mm (1)
  • 6-1/4 in;158.8 mm (3)
  • 6-1/8 in;155.6 mm (4)
  • 6-19/32 in;167.5 mm (1)
  • 6-3/4 in;171.5 mm (4)
  • 6-5/16 in;160.3 mm (1)
  • 7" (17.8 cm) (1)
  • 7" (17.8 cm) (3)
  • 7.125" (18.1 cm) (2)
  • 7.17" (18.2 cm) (1)
  • 7.25 in;184.2 mm (1)
  • 7.25" (18.4 cm) (1)
  • 7.313 (2)
  • 7.32" (18.6 cm) (1)
  • 7.344" (18.7 cm) (1)
  • 7.4" (18.8 cm) (1)
  • 7.5 (2)
  • 7.5" (19.1 cm) (1)
  • 7.5" (19.1 cm) (1)
  • 7.65" (19.4 cm) (1)
  • 7.75 (1)
  • 7.75 in;196.9 mm (2)
  • 7.75" (19.7 cm) (1)
  • 7.75" (19.7 cm) (4)
  • 7.76" (19.7 cm) (1)
  • 7.797 in;198 mm (1)
  • 7.891 in;200.4 mm (1)
  • 7.9 in;20.1 mm (1)
  • 7.9 in;201 mm (1)
  • 7.98" (20.3 cm) (1)
  • 7-1/4 in;184 mm (1)
  • 7-1/8 in;181.0 mm (2)
  • 7-1/8 in181.0 mm (1)
  • 7-3/4 in;196.9 mm (4)
  • 8 in;203 mm (2)
  • 8 in;203.2 mm (4)
  • 8" (20.3 cm) (3)
  • 8.09" (20.6 cm) (1)
  • 8.1" (20.6 cm) (1)
  • 8.125 (1)
  • 8.203" (20.8 cm) (1)
  • 8.25 (1)
  • 8.25" (21.0 cm) (1)
  • 8.313" (21.1 cm) (3)
  • 8.344" (21.2 cm) (3)
  • 8.375 (1)
  • 8.39" (21.3 cm) (1)
  • 8.41 (1)
  • 8.41" (21.4 cm) (1)
  • 8.438 in;214.3 mm (1)
  • 8.5" (21.6 cm) (2)
  • 8.5" (21.6 cm); 9" (22.9 cm) (1)
  • 8.7" (22.1 cm) (1)
  • 8.75" (22.2 cm) (2)
  • 8.94" (22.7 cm) (1)
  • 8-1/16 in;204.8 mm (3)
  • 8-1/2 in;216 mm (1)
  • 8-1/4 in;209.6 mm (2)
  • 8-1/8 in;206.4 mm (3)
  • 8-11/32 in;211.9 mm (3)
  • 8-3/4 in;222.3 mm (1)
  • 8-5/16 in;211.1 mm (1)
  • 8-5/8 in;219.1 mm (2)
  • 8-7/16 in;214.3 mm (2)
  • 8-9/16 in;217.5 mm (2)
  • 9 (1)
  • 9 in (2)
  • 9 in;228.6 mm (1)
  • 9 in;229 mm (3)
  • 9" (22.9 cm) (5)
  • 9.0" (23 cm) (1)
  • 9.09" (23.1 cm) (3)
  • 9.125 to 9.6875 (1)
  • 9.3/8 in;238.1 mm (1)
  • 9.35" (23.7 cm) (4)
  • 9.375 (1)
  • 9.391 (3)
  • 9.5" (24.1 cm) (2)
  • 9.5" (24.1 cm) (2)
  • 9.54 (1)
  • 9.55" (24.3 cm) (1)
  • 9.594 in;243.7 mm (1)
  • 9.6" (24.4 cm) (1)
  • 9.75 (6)
  • 9.75 to 10.3125 (1)
  • 9.75" (24.8 cm) (3)
  • 9-1/2 in;241 mm (2)
  • 9-1/2 in;241.3 mm (6)
  • 9-3/4 in;247.7 mm (4)
  • 9-3/8 in;238.1 mm (2)
  • 9-7/64 in;231.4 mm (2)
  • 9-7/8 in;250 mm (1)
  • 9-9/16 in;242.9 mm (1)
  • Show More...

• Jaw Width

  

  • 0.26" (0.7 cm) (1)
  • 0.375" (1 cm) (1)
  • 0.5 in;12.7 mm (1)
  • 0.5" (1.3 cm) (2)
  • 0.688" (1.7 cm) (4)
  • 0.75" (1.9 cm) (1)
  • 0.938" (2.4 cm) (1)
  • 0.969" (2.5 cm) (1)
  • 1 in;25.4 mm (7)
  • 1.02" (2.6 cm) (1)
  • 1.188 (3 cm)Joint TypeHot RivetedMaterialSteelOverall Length8.063 (20.5 cm) (1)
  • 1.188" (3 cm) (1)
  • 1.25 in;31.8 mm (2)
  • 1.25" (3.2 cm) (7)
  • 1.26" (3.2 cm) (1)
  • 1.29" (3.3 cm) (1)
  • 1.75" (4.5 cm) (1)
  • 1-1/14 in;32 mm (2)
  • 1-1/4 in;31.8 mm (7)
  • 1-3/16 in;30.2 mm (7)
  • Show More...

• Battery Type

  

  • 2 x AAA Alkaline (1)
  • 3 x 1.5V AA Alkaline (1)
  • Show More...

• Includes

  

  • (1) 5/16-Inch Cabinet-Tip;(1) #2 Phillips-Tip Screwdriver (1)
  • (2) Alkaline 1.5V AAA Battery (1)
  • (2) Screwdrivers (1)
  • (3) 5' (1.5 m) Glow Rods with Bullet Nose and Hook Attachments (2)
  • (3) 5/32 in (3.96 mm) diameter 6 in (1.8 m) glow rods with bullet nose and hook attachments (1)
  • (4) Bags (1)
  • (5) 4' (1.2 m) Lo-Flex Fish Rods, (1) 5' (1.3 m) Mid-Flex Glow Rod with Bullet Nose and Hook Attachments (1)
  • (5) Mil Back Plate (1)
  • 2 x AAA (1)
  • 600-4;602-6;601-3;601-6;605-4;603-3;603-4 (1)
  • 604-3, 606-2, 607-3 and 608-3 (1)
  • AUX Cable;USB Charging Cable (1)
  • Bright LED Flashlight (1)
  • Handle 51427 (2)
  • Handle 51429 (1)
  • Hard Carrying Case (1)
  • Pouch;Test leads with CAT III/CAT IV;Safety Caps;Thermocouple with Adapter (Temperature-Measuring Models Only);Battery (3)
  • Screw-On Alligator Clip;Pair of Universal Test Leads (1)
  • Six Different Size Knockout Punches and Dies, Two Draw Studs and Ratcheting Box End Wrench (1)
  • Swivel Snap Hook, Web Strap (1)
  • T-Handle Set with Stand, SAE, 6'' Blades (2)
  • T-Handle Set with Stand, SAE, 9'' Blades (1)
  • Show More...

• Number Of Pieces

  

  • 1 (1)
  • 10 (3)
  • 11 (2)
  • 12 (1)
  • 14 (1)
  • 15 (1)
  • 2 (2)
  • 20 (1)
  • 3 (2)
  • 4 (7)
  • 5 (5)
  • 6 (5)
  • 7 (8)
  • 8 (2)
  • 9 (1)
  • Show More...

• Overall Width

  

  • 0.06" (0.2 cm) (1)
  • 0.188" (0.5 cm) (1)
  • 0.45" (1.1 cm) (1)
  • 0.5 (1.3 cm)Weight0.80 oz (22.7 g) AD6.027720201103C092644441905000926444419054420027111503Brand NameKlein ToolsBlade Length1.75 (4.5 cm) (1)
  • 0.5 in;12.7 mm (2)
  • 0.5" (1.3 cm) (2)
  • 0.516 in;13.1 mm (2)
  • 0.6" (1.5 cm) (1)
  • 0.69" (1.8 cm) (1)
  • 0.7" (1.8 cm) (1)
  • 0.72" (1.8 cm) (3)
  • 0.75" (1.9 cm) (1)
  • 0.8" (2 cm) (1)
  • 0.813 in;20.7 mm (1)
  • 0.813" (2.1 cm) (1)
  • 0.88" (2.2 cm) (1)
  • 0.938 in;23.8 mm (1)
  • 0.984" (2.5 cm) (1)
  • 1 (2.5 cm)Style_NameStandardTether CapableNoTypeIronworker's PliersWeight0.7 oz (308 g) AD6.027720201102C09264472049900092644720499D248-9STT27112114Brand NameKlein ToolsApplicationSoft Annealed Rebar Tie WireCut StyleStandardCutting KnivesStandardHandle ColorRedHandle FinishPlastic DippedHandle Length6.125 (15.6 cm) (1)
  • 1 in;25.4 mm (4)
  • 1" (2.5 cm) (1)
  • 1" (2.5 cm) (2)
  • 1.05" (2.7 cm) (1)
  • 1.08" (2.7 cm) (1)
  • 1.1 in;28 mm (1)
  • 1.11" (2.8 cm) (1)
  • 1.125" (2.9 cm) (1)
  • 1.17 (3 cm)Quick Release—Range—Set / IndividualSet: 1/4 and 5/16" Nut Driver; 1/4 Socket Adapter; #1 and #2 Phillips; 3/16" and 1/4 Slotted Drive Bits (1)
  • 1.21" (3.1 cm) (1)
  • 1.234" (3.1 cm) (1)
  • 1.25" (3.2 cm) (2)
  • 1.25" (3.2 cm) (1)
  • 1.297 (3.3 cm)Special FeaturesIncludes 50 BladesType1.0 lb (0.5 kg)Weight1.0 lb (0.45 kg) AD6.027720201103C092644440243000926444402434413027111503Brand NameKlein ToolsBlade Material440A Stainless SteelHandle ColorOrange/BlackHandle MaterialRubberLength Closed4.125 (10.5 cm) (1)
  • 1.37" (3.5 cm) (1)
  • 1.39" (3.5 cm) (With Transmitter docked in Receiver) (1)
  • 1.45" (3.7 cm) (1)
  • 1.476 in (2)
  • 1.48 in (1)
  • 1.5" (3.8 cm) (4)
  • 1.50" (3.8 cm) (2)
  • 1.6 in (1)
  • 1.67" (4.2 cm) (1)
  • 1.78" (4.5 cm) (1)
  • 1.8 in (1)
  • 1.8" (4.6 cm) (1)
  • 1.84" (4.7 cm) (1)
  • 1.88" (4.8 cm) (2)
  • 1.891" (4.8 cm) (1)
  • 1.95 in (1)
  • 1/2 in;13 mm (1)
  • 10" (25.4 cm) (1)
  • 10.25" (26 cm) (1)
  • 10.7" (27.2 cm) (3)
  • 10-1/4 in;260.4 mm (1)
  • 12" (30.5 cm) (1)
  • 12.25" (31.1 cm) (1)
  • 12.5 in;318 mm (1)
  • 12.5" (31.8 cm) (1)
  • 12.5" (31.8 cm), 10" (25.4 cm) (1)
  • 13.5" (34.3 cm) (1)
  • 15.5" (39.4 cm) (1)
  • 16.203 in;411.6 mm (1)
  • 17.75" (45.1 cm) (1)
  • 2 in;50.8 mm (1)
  • 2" (5.1 cm) (1)
  • 2" (5.1 cm) (8)
  • 2.05" (5.2 cm) (1)
  • 2.06" (5.2 cm) (6)
  • 2.09" (5.3 cm) (1)
  • 2.12" (5.4 cm) (1)
  • 2.12" (5.4 cm) (1)
  • 2.13 (5.4 cm) (1)
  • 2.16" (5.5 cm) (1)
  • 2.25" (5.7 cm) (4)
  • 2.27" (5.8 cm) (1)
  • 2.29" (5.8 cm) (3)
  • 2.3" (5.8 cm) (1)
  • 2.31" (5.9 cm) (1)
  • 2.34 to 2.367 (5.9 to 6 cm) (1)
  • 2.344" (6 cm) (1)
  • 2.35" (6 cm) (4)
  • 2.5" (6.4 cm) (1)
  • 2.5" (6.4 cm) (1)
  • 2.688" (6.8 cm) (1)
  • 2.75" (70 cm) (1)
  • 2.84" (7.2 cm) (1)
  • 3 (7.6 cm)Size_Name9-PocketSub BrandPowerlineWeight14.7 oz (417 g) AD6.027720201103C092644570001000926445700015700027111715Brand NameKlein ToolsDrive Size0.375(1 cm) (1)
  • 3 (7.6 cm)Size_Name12-InchSpecial FeaturesTether RingStyle_Namewith Tether RingWeight1.4 lb (0.6 kg) AD6.027720201102C09264473026900092644730269D502-1627112112Brand NameKlein ToolsHandle ColorYellowHandle FinishPlastic-DippedJaw Capacity4.25 (10.8 cm) (1)
  • 3.00 in;76 mm (1)
  • 3.02" (7.7 cm) (1)
  • 3.25 in;84 mm (1)
  • 3.5" (8.9 cm) (1)
  • 3.75" (9.5 cm) (1)
  • 3.75" (9.1 cm) (1)
  • 3.81" (9.7 cm) (3)
  • 3.875 in;98.4 mm (1)
  • 3.90" (9.9 cm) (1)
  • 3/16 in (1)
  • 3-5/16 in;84 mm (1)
  • 4 (10.2 cm)Size_Name0.18 to 0.60" Cable DiameterSpecial FeaturesHot LatchSpringYStyle_NameSafe Load 5000 lbSwing LatchNTypeParallel Jaw GripWeight3.8 lb (1.7 kg) AD6.027720201102C09264447753900092644477539KT460027111712Brand NameKlein ToolsApplicationFirmly Grip Insulated Cables and ConductorsCable Diameter0.3 to 0.8" (7.62 to 20.3 mm)Cable TypeACSRConfigurationSpringHot LatchNJaw Length5 (12.7 cm) (1)
  • 4" (10.2 cm) (1)
  • 4.00" (10.2 cm) (1)
  • 4.12" (10.5 cm) (1)
  • 4.25 in;108 mm (1)
  • 4.25" (10.8 cm) (2)
  • 4.5" (11.4 cm) (2)
  • 4.656" (11.8 cm) (2)
  • 4.7" (11.9 cm) (1)
  • 46" (116.8 cm) (1)
  • 5 in;127.0 mm (1)
  • 5" (12.7 cm) (1)
  • 5.3 in;134.6 mm (1)
  • 5.38" (13.7 cm) (1)
  • 5.5" (14 cm) (1)
  • 5.50" (14 cm) (1)
  • 50.5" (128.3 cm) (1)
  • 55.5" (141 cm) (1)
  • 6" (15.2 cm) (1)
  • 6.5" (16.5 cm) (1)
  • 6.50" (16.5 cm) (1)
  • 6.75" (17.2 cm) (1)
  • 7" (17.8 cm) (1)
  • 7.25 in;184.2 mm (1)
  • 7.5" (19.1 cm) (1)
  • 7.5" (19.1 cm) (1)
  • 7-1/4 in;184.2 mm (1)
  • 8" (20.3 cm) (1)
  • 8.8" (22.4 cm) (2)
  • 8-3/4 in;222.3 mm (1)
  • 9 in;228.6 mm (1)
  • 9" (22.9 cm) (1)
  • Show More...

• Shank Type

  

  • 1/4" Hex (17)
  • 3/8" Hex (2)
  • Hex Arbor (1)
  • Round (43)
  • Round Rapi-Driv(R) (1)
  • Round Rapi-Driv® (2)
  • Square (4)
  • Show More...

• Battery Life

  

  • — (1)
  • 10 h (1)
  • 10 hr (1)
  • 5 hr (1)
  • Average: 134 hr; Continuous IR: 64 hr (1)
  • High: 4 hr; Low 8 hr (1)
  • Up to 10 hr (2)
  • Show More...

• Height

  

  • 1 in;25.4 mm (2)
  • 1.156 in;29.4 mm (1)
  • 1-35/64 in;39.3 mm (2)
  • 1-39/64 in;40.9 mm (1)
  • 16-1/4" (412.8 mm) (1)
  • 2.875 in;73 mm (1)
  • 6.5 in;165.1 mm (1)
  • 7" (178mm), 5.5" (140mm) (1)
  • 9-1/2" (241.3 mm) (1)
  • Show More...

• Graduations

  

  • 1/16'' (4)
  • 1/16 in (1)
  • Show More...

• Length

  

  • 1.625 in;41.3 mm (1)
  • 13 (1)
  • 13.5 in;342.9 mm (1)
  • 15 (1)
  • 22 in;558.8 mm (1)
  • 41 in;1041 mm (1)
  • 5.5 in;139.7 mm (2)
  • 5.828 in;148 mm (1)
  • 8-45/64 in;221.1 mm (1)
  • 9-1/2" (241.3 mm) (1)
  • 9-3/32 in;231 mm (2)
  • Show More...

• Drive Size

  

  • 1/4 in;5/16 in (3)
  • 1/4 in;5/16 in;3/8 in (2)
  • 1/4 in;5/16 in;3/8 in;7/16 in;1/2 in;9/16 in Hex Nut Drivers (1)
  • 1/4” and 5/16” (2)
  • 3/16 in;1/4 in;5/16 in;11/32 in;3/8 in;7/16 in;1/2 in (1)
  • 3/16 in;1/4 in;5/16 in;11/32 in;3/8 in;7/16;1/2 in (1)
  • 3/16 in;1/4 in;5/16 in;11/32 in;3/8 in;7/16;1/2 in (630 Nut Drivers) (1)
  • 3/8" (1)
  • 5/16 in (1)
  • 5/16 in;1/4 in (2)
  • 5/64 in (2 mm);3/32 in (2 mm);7/64 in (3 mm);1/8 in (3 mm);9/64 in (4 mm);5/32 in (4 mm);3/16 in(5 mm);7/32 in (6 mm) and 1/4 in (6 mm) (1)
  • Multi (1)
  • Show More...

• Number Of Vials

  

  • 1 (1)
  • 3 (4)
  • 4 (2)
  • Show More...

• Hex Size

  

  • 1/2 (1)
  • 1/2 in (1)
  • 3/16" (1)
  • 3/32Size_Name4-Inch LengthStyle_Name3/32-Inch HexSub BrandJourneymanWeight0.05 oz (1.4 g) AD6.027720201102C09264433653900092644336539JTH4E0727111710Brand NameKlein ToolsBlade Length4 (10.2 cm) (1)
  • 3/8" (1)
  • 5/16 (1)
  • Show More...

• Jaw Length

  

  • 0.45" (1.1 cm) (1)
  • 0.696" (1.8 cm) (2)
  • 0.781" (2 cm) (1)
  • 0.813 (2.1 cm)Jaw Thickness0.813 (2.1 cm) (1)
  • 0.813 in;20.7 mm (1)
  • 0.83" (2.1 cm) (1)
  • 1" (2.5 cm) (2)
  • 1.085" (2.8 cm) (1)
  • 1.188" (3 cm) (1)
  • 1.25" (3.2 cm) (1)
  • 1.35" (3.4 cm) (1)
  • 1.594 in;40.5 mm (1)
  • 1.594" (4 cm) (1)
  • 1.625" (4.1 cm) (1)
  • 1.91" (4.9 cm) (4)
  • 1.969" (5 cm) (1)
  • 1-19/32 in;40.5 mm (7)
  • 1-19/32 in;41 mm (2)
  • 13/16 in;20.6 mm (7)
  • 2 in;50.8 mm (1)
  • 2" (5.1 cm) (1)
  • 2.313 in;58.8 mm (1)
  • 2.32" (5.9 cm) (1)
  • 2.43" (6.2 cm) (1)
  • 2.438" (6.2 cm) (1)
  • 2-3/16 in;55.6 mm (2)
  • 2-5/16 in;58.7 mm (4)
  • Show More...

• Tether Capable

  

  • No (41)
  • Yes (3)
  • Show More...

• Width

  

  • 0.719 in;18.3 mm (3)
  • 1 in;25.4 mm (1)
  • 1.875 in;47.6 mm (1)
  • 3-13/16 in;96.8 mm (2)
  • 3-13/64 in;81.4 mm (1)
  • 50.5 in;1282.7 mm (1)
  • 7-1/2" (190.5 mm) (1)
  • Show More...

• Weight

  

  • 0.02 oz (0.45 g) (1)
  • 0.06 oz (1.8 g) (1)
  • 0.062 lb;0.028 kg (1)
  • 0.1 oz (3 g) (1)
  • 0.10 lb (0.05 kg) (3)
  • 0.10 lb;0.05 kg (1)
  • 0.10 oz (2.8 g) (5)
  • 0.14 lb (1)
  • 0.14 lb;0.06 kg (1)
  • 0.15 (1)
  • 0.15 lb;0.07 kg (3)
  • 0.15 lb;68 g (1)
  • 0.16 lb;0.07 kg (1)
  • 0.16 oz (4.5 g) (4)
  • 0.18 lb (0.08 kg) (1)
  • 0.19 lb;0.09 kg (1)
  • 0.20 lb;0.09 kg (4)
  • 0.22 lb;0.09 kg (1)
  • 0.23 lb;0.10 kg (1)
  • 0.25 lb;0.11 kg (6)
  • 0.26 lb;0.12 kg (2)
  • 0.27 lb;0.12 kg (3)
  • 0.2700 lb/EA (1)
  • 0.28 lb (2)
  • 0.29 lb;0.13 kg (1)
  • 0.3 oz (8 g) (2)
  • 0.30 lb;0.14 kg (3)
  • 0.31 lb;0.140 kg (1)
  • 0.3125 (1)
  • 0.32 oz (9.1 g) (1)
  • 0.34 lb;0.15 kg (3)
  • 0.35 lb;0.16 kg (2)
  • 0.37 lb;0.17 kg (1)
  • 0.37 lb;168 g (1)
  • 0.38 lb (1)
  • 0.40 lb;0.18 kg (1)
  • 0.40 oz (11.0 g) (2)
  • 0.41 lb;0.19 kg (1)
  • 0.41lb;0.19 kg (2)
  • 0.43 lb;0.20 kg (1)
  • 0.48 lb;0.22 kg (3)
  • 0.50 lb (0.23 kg) (1)
  • 0.50 lb;0.23 kg (3)
  • 0.50 oz (14.2 g) (5)
  • 0.55 lb;249 g (1)
  • 0.56 lb;0.25 kg (1)
  • 0.59 oz (16.7 g) (1)
  • 0.60 lb;0.27 kg (2)
  • 0.61 (1)
  • 0.63 lb;0.29 kg (4)
  • 0.64 lb;0.29 kg (2)
  • 0.64 oz;18.1 g (1)
  • 0.6625 (1)
  • 0.7 lb;0.8 kg (1)
  • 0.70 lb;0.32 kg (1)
  • 0.75 lb;0.34 kg (1)
  • 0.77 lb (1)
  • 0.79 lb;0.36 kg (1)
  • 0.8 oz (23 g) (2)
  • 0.8 oz;23 g (1)
  • 0.80 lb (2)
  • 0.80 lb;0.36 kg (2)
  • 0.80 oz (22.7 g) (3)
  • 0.80 oz;22.7 g (1)
  • 0.81 lb;0.37 kg (2)
  • 0.84 lb;0.38 kg (1)
  • 0.9 oz (26 g) (2)
  • 0.90 lb;0.41 kg (1)
  • 0.98 lb;0.44 kg (1)
  • 0.9812 (1)
  • 1 (1)
  • 1 lb (0.5 kg) (1)
  • 1.0 lb (0.5 kg) (7)
  • 1.09 lb (0.5 kg) (1)
  • 1.1 lb (0.5 kg) (8)
  • 1.1 lb;0.5 kg (7)
  • 1.1 oz (31 g) (2)
  • 1.1 oz;31 g (2)
  • 1.10 oz (31.0 g) (1)
  • 1.13 lb (1)
  • 1.14 lb (1)
  • 1.2 lb (0.5 kg) (5)
  • 1.2 lb (0.6 kg) (1)
  • 1.2 lb;0.5 kg (1)
  • 1.25 lb (0.6 kg) (1)
  • 1.3 lb (0.6 kg) (3)
  • 1.3 lb;0.6 kg (1)
  • 1.4 lb;0.64 kg (1)
  • 1.40 oz (39.0 g) (1)
  • 1.45 lb (1)
  • 1.5 lb (0.7 kg) (1)
  • 1.5 lb;0.68 kg (2)
  • 1.5 lb;0.7 kg (5)
  • 1.5 oz (43 g) (1)
  • 1.5 oz;43 g (2)
  • 1.6 oz (44 g) (1)
  • 1.6 oz (45 g) (11)
  • 1.6 oz;45 g (8)
  • 1.7 (1)
  • 1.7 lb;0.77 kg (1)
  • 1.76 oz (50 g) (1)
  • 1.8 (1)
  • 1.8 lb (0.8 kg) (1)
  • 1.8 oz (51 g) (1)
  • 1.8 oz (52.0 g) (1)
  • 1.8 oz;50 g (1)
  • 1.9 lb (0.8 kg) (1)
  • 1.9 oz (54 g) (1)
  • 1.9125 lb (0.87kg) (1)
  • 10 oz;283 g (1)
  • 10.1 oz (286 g) (4)
  • 10.2 oz (290 g) (2)
  • 10.6 oz (299 g) (1)
  • 10.7 oz (304 g) (1)
  • 10.7 oz;303 g (1)
  • 11.2 oz (318 g) (2)
  • 11.6 lb;5.26 kg (1)
  • 11.8 oz (335 g) (1)
  • 13.00 oz (380.0 g) (1)
  • 13.2 lb (6.0 kg) (1)
  • 13.4 oz (381 g) (1)
  • 13.6 oz (386 g) (1)
  • 13.6 oz;386 g (2)
  • 13.8 oz (390 g) (1)
  • 13.9 oz (395 g) (1)
  • 14.4 oz (408 g) (2)
  • 14.7 (1)
  • 14.7 oz (417 g) (2)
  • 16.9 lb (7.7 kg) (1)
  • 17.6 oz (499 g) (1)
  • 17.8 oz;503 g (1)
  • 17.9 oz (508 g) (1)
  • 19.0 lb (8.6 kg) (1)
  • 2 lb (1)
  • 2.0 lb (0.9 kg) (1)
  • 2.0 lb (0.91 kg) (1)
  • 2.0 lb;0.9 kg (1)
  • 2.00 oz (57.00 g) (1)
  • 2.1 oz (59 g) (1)
  • 2.2 lb (1.0 kg) (1)
  • 2.2 oz;64 g (1)
  • 2.24 oz (64 g) (1)
  • 2.3 oz (66 g) (1)
  • 2.4 oz (68 g) (2)
  • 2.4 oz;68 g (2)
  • 2.5 lb (1.1 kg) (1)
  • 2.5 lb;1.1 kg (1)
  • 2.5 oz (72 g) (1)
  • 2.5 oz;71 g (2)
  • 2.6 lb (1.2 kg) (1)
  • 2.6 oz (73 g) (2)
  • 2.6 oz (75 g) (1)
  • 2.7 oz (77 g) (3)
  • 2.8 lb (1.3 kg) (1)
  • 2.9 oz (82 g) (1)
  • 20.7 (1)
  • 20.8 oz (590 g) (1)
  • 24.7 (1)
  • 3 oz (86 g) (2)
  • 3.0 lb;1.36 kg (1)
  • 3.0 oz;86 g (1)
  • 3.2 lb;1.45 kg (1)
  • 3.2 oz (91 g) (18)
  • 3.2 oz;91 g (2)
  • 3.20 oz (92.00 g) (1)
  • 3.4 lb (1.5 kg) (1)
  • 3.4 oz;96 g (1)
  • 3.5 oz (99 g) (1)
  • 3.60 oz (106.5 g) (1)
  • 3.7 oz (104 g) (1)
  • 3.7 oz;104 g (2)
  • 3.8 lb;1.7 kg (1)
  • 3.8 oz (109 g) (2)
  • 4 oz (113 g) (14)
  • 4 oz (113.4 g) (1)
  • 4.0 lb (1.8 kg) (1)
  • 4.0 oz (113 g) (4)
  • 4.0 oz;113 g (1)
  • 4.2 lb (1.9 kg) (1)
  • 4.2 oz (118 g) (2)
  • 4.3 lb (2.0 kg) (2)
  • 4.3 oz (122 g) (1)
  • 4.5 lb (2.0 kg) (2)
  • 4.6 lb (2.1 kg) (1)
  • 4.6 oz (132 g) (3)
  • 4.8 oz (136 g) (9)
  • 4.8 oz;136 g (1)
  • 48.50 oz (1)
  • 5.0 lb (2.3 kg) (1)
  • 5.0 lb;2.27 kg (1)
  • 5.1 oz (145 g) (3)
  • 5.10 oz (144.2 g) (1)
  • 5.3 lb;2.4 kg (1)
  • 5.3 lb;2.40 kg (1)
  • 5.3 oz (150 g) (2)
  • 5.3 oz;150 g (1)
  • 5.4 lb (2.5 kg) (1)
  • 5.4 oz (154 g) (2)
  • 5.5 lb;2.49 kg (1)
  • 5.50 oz (156.0 g) (1)
  • 5.6 oz (159 g) (7)
  • 5.8 oz;164 g (1)
  • 5.9 oz (167 g) (1)
  • 5.9 oz (168 g) (1)
  • 5.90 oz (167.0 g) (1)
  • 6.0 lb (2.7 kg) (1)
  • 6.0 lb;2.7 kg (1)
  • 6.0 lb;2.72 kg (1)
  • 6.00 oz (170.0 g) (1)
  • 6.1 lb (2.8 kg) (1)
  • 6.1 oz (172 g) (1)
  • 6.2 lb (1)
  • 6.2 oz (177 g) (3)
  • 6.3 lb (2.8 kg) (1)
  • 6.4 oz (181 g) (4)
  • 6.4 oz;181 g (1)
  • 6.40 oz (180.0g) (1)
  • 6.6 lb;2.99 kg (1)
  • 6.6 oz (186 g) (2)
  • 6.6 oz;187 g (1)
  • 6.8 lb (3.1 kg) (1)
  • 6.8 lb;3.1 kg (1)
  • 7 oz (200 g) (2)
  • 7.0 lb (3.2 kg) (1)
  • 7.0 oz (187 g) (2)
  • 7.2 oz (204 g) (2)
  • 7.2 oz (204.1 g) (1)
  • 7.2 oz. (204 g) (1)
  • 7.4 oz (209 g) (1)
  • 7.40 oz (210.0 g) (1)
  • 7.6 oz (215 g) (1)
  • 7.7 oz (218 g) (1)
  • 7.9 lb (3.6 kg) (1)
  • 8 oz (227 g) (5)
  • 8.0 lb (3.6 kg) (2)
  • 8.5 oz (241 g) (2)
  • 8.6 oz (245 g) (2)
  • 8.8 oz (249 g) (1)
  • 8.9 lb (4.0 kg) (1)
  • 9 oz (254 g) (1)
  • 9.0 lb;4.08 kg (1)
  • 9.3 oz (264 g) (1)
  • 9.4 oz;266 g (1)
  • 9.6 lb (4.3 kg) (1)
  • 9.6 lb;4.35 kg (1)
  • 9.6 oz (272 g) (3)
  • 9.6 oz;272 g (7)
  • 9.8 oz (277 g) (1)
  • 9.8 oz;278 g (2)
  • 9.9 oz (281 g) (1)
  • Show More...

• Overall Height

  

  • .25" (0.6 cm) (1)
  • 0.172" (0.4 cm) (1)
  • 0.18" (0.5 cm) (1)
  • 0.25" (0.6 cm) (1)
  • 0.342 to 0.99 (0.9 to 2.5 cm) (1)
  • 0.375 (1 cm)Overall Length4.5 (11.4 cm) (1)
  • 0.406" (1.0 cm) (1)
  • 0.5" (1.3 cm) (2)
  • 0.50" (1.3 cm) (2)
  • 0.515" (1.3 cm) (1)
  • 0.53" (1.4 cm) (1)
  • 0.65" (1.7 cm) (1)
  • 0.69" (1.8 cm) (1)
  • 0.703" (1.8 cm) (1)
  • 0.75" (1.9 cm) (13)
  • 0.77" (2 cm) (1)
  • 0.781" (2 cm) (1)
  • 0.79 (2 cm)Overall Length4.33 (11 cm) (1)
  • 0.9" (2.2 cm) (1)
  • 0.9" (2.3 cm) (1)
  • 0.94" (2.4 cm) (1)
  • 0.95" (2.4 cm) (1)
  • 1" (2.5 cm) (2)
  • 1" (2.5 cm) (1)
  • 1.00" (2.5 cm) (2)
  • 1.06" (2.7 cm) (1)
  • 1.16" (2.9 cm) (1)
  • 1.16" (2.9 cm) (1)
  • 1.19" (3 cm) (2)
  • 1.25" (3.2 cm) (1)
  • 1.3" (3.3 cm) (1)
  • 1.32" (3.4 cm) (1)
  • 1.38" (3.5 cm) (1)
  • 1.41" (3.6 cm) (1)
  • 1.44" (3.7 cm) (1)
  • 1.45" (3.7 cm) (1)
  • 1.5 (3.8 cm)Overall Length13 (33 cm) (1)
  • 1.5" (3.8 cm) (2)
  • 1.5" (3.8 cm) (1)
  • 1.52" (3.9 cm) (1)
  • 1.55" (3.9 cm) (3)
  • 1.594" (4.1 cm) (1)
  • 1.6" (4.1 cm) (1)
  • 1.61" (4.1 cm) (1)
  • 1.64" (4.2 cm) (1)
  • 1.70" (4.3 cm) (1)
  • 1.75 (4.5 cm)Overall Length13 (33 cm) (1)
  • 1.75" (4.5 cm) (1)
  • 1.75" (4.4 cm) (1)
  • 1.75" (4.5 cm) (2)
  • 1.9" (4.8 cm) (1)
  • 10" (25.4 cm) (1)
  • 10" (25.4 cm) (4)
  • 10.25" (26 cm) (1)
  • 12 (30.5 cm)Overall Length11 (27.9 cm) (1)
  • 12" (30.5 cm) (2)
  • 12.25" (31.1 cm) (1)
  • 13" (33 cm) (1)
  • 13.5" (34.3 cm) (1)
  • 14" (35.6 cm) (2)
  • 15" (38.1 cm) (1)
  • 16" (40.6 cm) (2)
  • 16.25" (41.3 cm) (1)
  • 17" (43.2 cm) (2)
  • 18.5" (47 cm) (1)
  • 19.25" (48.9 cm) (1)
  • 19.5" (50 cm) (1)
  • 2 (5.1 cm)Overall Length9.188 (23.3 cm) (1)
  • 2.07" (5.3 cm) (1)
  • 2.16" (5.5 cm) (With Transmitter docked in Receiver) (1)
  • 2.188 in;55.6 mm (2)
  • 2.25" (5.7 cm) (2)
  • 2.5" (6.4 cm) (1)
  • 2.52 in;64 mm (1)
  • 2.56" (6.5 cm) (1)
  • 2.594" (6.6 cm) (1)
  • 2.688" (6.8 cm) (1)
  • 2.75" (7 cm) (1)
  • 2.797 (7.1 cm)Overall Length4.328 (11 cm) (1)
  • 2.88" (7.3 cm) (2)
  • 20" (50.8 cm) (2)
  • 3.01" (7.5 cm) (1)
  • 3.047" (7.7 cm) (1)
  • 3.2" (8.1 cm) (1)
  • 3.43" (8.7 cm) (2)
  • 3.5 in;88.9 mm (1)
  • 3.6" (9.4 cm) (1)
  • 3.78" (9.6 cm) (1)
  • 4" (10.2 cm) (1)
  • 4" (10.2 cm) (1)
  • 4.49" (11.4 cm) (1)
  • 4.5" (11.4 cm) (1)
  • 4.53" (11.5 cm) (1)
  • 4.75" (12 cm) (1)
  • 5" (12.7 cm) (1)
  • 5.75" (14.6 cm) (1)
  • 6" (14.9 cm) (1)
  • 6" (15.2 cm) (1)
  • 6.5" (16.5 cm) (8)
  • 6.5" (16.5 cm); 7.5" (19.1 cm) (1)
  • 6.75" (17.2 cm) (2)
  • 7" (17.8 cm) (6)
  • 7" (17.8 cm), 5.5" (14 cm) (2)
  • 7.13" (18.3 cm) (1)
  • 7.25" (18.4 cm) (2)
  • 7.75" (19.7 cm) (1)
  • 8" (20.3 cm) (1)
  • 8.5" (21.6 cm) (1)
  • 9.5" (24.1 cm) (1)
  • 9.5" (24.1 cm) (1)
  • 9.75" (24.8 cm) (2)
  • 9.875" (25.1 cm) (1)
  • Open 1.5" (3.8 cm); Closed 1.906" (4.8 cm) (1)
  • Show More...

• Diameter

  

  • — (2)
  • 1/4" (6.4 mm) (1)
  • 1/4" and 3/16" (6.4 to 4.8 mm) (1)
  • 12 in;305 mm (1)
  • 17 in;432 mm (1)
  • 17" (43.2 cm) (1)
  • 17" (43.2 cm) (1)
  • 2.8" (7.1 cm) (1)
  • 3/16 in;4.8 mm (2)
  • 3/16" (0.5 cm) (1)
  • 5/32 in;4.0 mm (1)
  • Show More...

• Display Type

  

  • LCD (3)
  • LED (5)
  • Show More...

• Ip Rating

  

  • IP45 (1)
  • IP67 (Camera Only) (1)
  • Show More...

• Special Features

  

  • : IR Thermometer, Laser Pointer, LCD, LED and Audible Beep Indications, Auto-Power Off, Pocket Clip (1)
  • 13-Foot Standout;Attachment Channel to Tether Tape Measure;Double-Sided Blade Printing;Easy-to-read Bold Lines Every 1/8-Inch;Tough Blade (1)
  • 16-Foot Reach;Attachment Channel to Tether Tape Measure;Double-Sided Blade Printing;Easy-to-Read Bold Lines Every 1/8-Inch;Tough Blade (2)
  • 16-Foot Reach;Attachment Channel to Tether Tape Measure;Easy-to-read Bold Lines Every 1/8-Inch;Tough Blade (1)
  • 25 Piece Master Electrician's Kit; Piano Hinged Metal Box Includes Latch with Padlock Eye and Handle (1)
  • 3 Minute Shut Off;Water and Impact Resistant (1)
  • 3" (7.6 cm) Hollow Shafts (1)
  • 32.8 ft (10 m) Connectivity Range;Powerful Rear Magnet Holds Speaker to Metal Surfaces (1)
  • 40% Slimmer Jaws (3)
  • 50 - 500 Hz Low-Pitched Pulsing Beeping Sound; Blue LED Turns Off and Red LED Blinks (Approximately 2x Per Second) (1)
  • Adjustable Vents (2)
  • All-in-One,Integral Crimp Nest;No Removable Parts or Rotating Dies;High-Leverage Handles and Compound-Action Mechanism for Superior Mechanical Advantage;Adjustment Screw Allows User to Control Crimp Depth (1)
  • Allows use of K-Type Thermocouples into Banana Jacks (1)
  • Aluminum Titanium Nitride Coating; Dual Straight Fluting (1)
  • Angled Head (1)
  • Assisted Open (1)
  • Audible Alert, Auto-Power Off, Visual Notification (3)
  • Auto Power-Off (1)
  • Auto-power Off, Max/Min, Hold, Auto-Ranging and Low Battery Icons (1)
  • Battery Status Indicators, Rugged Chassis, Smart Battery Protection, Qualcomm® Quick Charge™ 3.0 Technology (1)
  • Bearing-Assist Opening Mechanism (1)
  • Broad Head for Larger Striking Surface (1)
  • Built-in Test Lead Holder and Integrated Flashlight (1)
  • Built-in Test Lead Holders on Back of Tester Spaced Correctly to Hold Leads for Testing Tamper-Resistant US-style Outlets (1)
  • Chain Tape Thong (2)
  • Clover Design Features Four Different Sizes in One Tool (2)
  • Coats Better and 30% More Slippery than Gel or Wax Lubricants (1)
  • Combines Common Wire Stripping Sizes with a Crimper and Two Cutters (1)
  • Comes with One Blade Stored in Handle for Convenience; Depth of Cut Adjusts Between Standard MC and Reduced Diameter MC (1)
  • Compact and Lightweight (7)
  • Complete Kit for Preparing and Connecting F Connectors (1)
  • Concealable Tip; Pocket Clip (1)
  • Concrete Tight (1)
  • Convenient Chart on the Tester (2)
  • Converts from Adjustable Wrench to Pipe Wrench by Reversing the Removable Jaw (1)
  • Crimper (2)
  • Crimper and Wire Stripping Holes (1)
  • Crimping Die Behind Hinge For Superior Leverage Crimping Non-Insulated Connectors, Lugs and Terminals. (2)
  • Cushion Grip (2)
  • Cushion-grip Handle (1)
  • Cushion-Grip™ (1)
  • Cuts Acsr, Screws, Nails and Most Hardened Wire. (2)
  • Cutting Capacity 10 Gauge Mild Steel;Also Cuts Aluminum, Fiberglass and Plastic. (1)
  • DC Polarity Indicators for DC Positive, DC Negative, and Both Illuminated for AC. Tests Low DC Voltage to 1.5V. Built in Test Lead Holders on Sides of Tester. (1)
  • Deep Pocket Clip (2)
  • Double Interlocking Hasp of Tempered Steel with Patented Interlocking Tabs for Extra Security (1)
  • Drill Tap and Deburr in One Step (1)
  • D-Ring for Tethering (1)
  • Dual Targeting Lasers, 20:1 Distance-to-Spot Ratio; Hi/Low Limits with Simultaneous Audible and Visual Alarms When Limits are Breached; Bright Backlit Display; Works with K-Type Probe Also (1)
  • Durable and Comfortable;Stretch Back for Extra Comfort and Flexibility (2)
  • Durable Neoprene-Impregnated Nylon Strap is Chemical/Abrasion Resistant and Non-Conductive (1)
  • Easy Grab and Go Styling (1)
  • Engineered, Manufactured and Tested For Prying and Chiseling. (1)
  • Ensures Precise 90-Degree Bends and Eliminates Dog Legs (1)
  • Evaporative Technology for Rapid Cooling (1)
  • Excess Tie Material is Automatically Cut Off (1)
  • Extended Cuff for Easy On/Off; Breathable and Comfortable (1)
  • Extended-Reach Keys (1)
  • Extra Capacity Size for Use in Confined Spaces (2)
  • Fast-Starting, Non-Walking Drill Tip (1)
  • Features Low Battery Indicator (3)
  • Features Low Battery Indicator and Auto Shut Off (1)
  • Fits Klein Extended-Reach (32559) Multi-Bit Screwdriver/Nut Driver (1)
  • Fits the 11-in-1 (32500) and 10-in-1 (32477) Screwdriver/Nut Drivers (2)
  • Flame Retardant and Impact Resistant Handle (7)
  • Flame Retardant and Impact Resistant Handle, Tip-Ident® Handle (1)
  • Flexible Drill Bit Made of Spring Steel for Extreme Flexibility (1)
  • Flexible Gooseneck (1)
  • Folding (1)
  • Folds for Easy Storage (1)
  • Forged - 4 Times Stronger Than Traditional Klein Wire Strippers (1)
  • Forged Steel, 4 Times Stronger Than Traditional Klein Wire Strippers (1)
  • Forms New Threads, Re-Forms Burred Or Damaged Threads, and Cleans Out Obstructions. (1)
  • Four Times Stronger than Traditional Klein Wire Strippers (1)
  • Free-Fall Snip, Extended Handle, Serrated Blades (1)
  • General-purpose selection of the most frequently used nut drivers. (1)
  • Glows in The Dark (1)
  • Green Led Turns Off and Red Led Illuminates Continuously. (1)
  • Grips charge in natural and artificial lighting. (1)
  • Heavy Duty Reinforced Bottom (1)
  • Heavy-Duty Razor-Edged Blades (1)
  • High strength steel handle features a swaged end for inserting conduit to correct overbends Bright orange color handle is easy to spot on the jobsite (1)
  • High Temperature Range (1)
  • High-Grade, Tungsten Carbide Inserts Sharpen Both Sides of the Blade at the Same Time (1)
  • High-Leverage Design for Exceptional Cutting Capability;Precision,One-Hand Shearing Action;Perfect for Working in Confined Spaces (1)
  • High-Leverage Design;Crimps Non-Insulated Connectors, Lugs and Terminals;Dual-Material Journeyman(TM) Handles (1)
  • High-Leverage Design;Cross-Hatched Knurl (1)
  • High-Visibility Orange Body (1)
  • Hinged Design, Extra Layer of Wind Protectant Fabric in front (1)
  • Hooded-Blade Design Keeps Tip from Slipping Out of Screws, Especially When Tightening Hard-to-Reach Conduit Fittings;Thicker Hood is Designed for Rugged Use (1)
  • Ideal for Plastic Tubing (1)
  • Includes 4 Assorted Colors:Red, Gray, Black and Brown. (1)
  • Includes core wire stripper/cutter;Wire looping and bending holes;Precision-ground stripping holes for easy removal of insulation;Easy-to-read wire gauge markings on both sides for stripping in either direction;Black-oxide finish resists corrosion (3)
  • Includes Crimper (1)
  • Includes Four Assorted Colors:Olive, Orange, Royal Blue, and Yellow. (1)
  • Includes Klein-Kurve(TM) Core Features Plus;Double Dipped Comfort Grips;Handy Closure Lock for Convenient Storage;Screw Shearing Holes;Precision Ground Stripping Holes;Coil Spring Provides Fast Self-Opening Action;Wire Looping and Bending Holes;Strong Gripping Serrated Nose for Easy Bending, Shaping, and Pulling of Wire (3)
  • Increased Usability and Readability Plus a Wider Torque Range (5-40 in. lbs) (1)
  • Induction-hardened 440A Stainless Steel Construction (1)
  • Interior Lid Compartment 6-1/2 in x 4 in x 1 in (165.1 x 101.6 x 25.4 mm) (1)
  • Interior Pocket, Swivel Snap (Cat. No. 2012) (1)
  • Klein Tools 10 In. Pump Pliers Feature A Secure Tongue and Groove Design For A Non-Slip Grip Even When Heavy Pressure Is Applied. It Has A Tension-Loaded Joint to Reduce Handle Wobble For Sure Gripping. Plastic-Dipped Handles Provided Added Comfort And (1)
  • Klein Tools' Interchangeable Multi-Bit Screwdrivers/Nut Drivers Are Heavy-Duty Tools Designed For Professionals. They Are Made Of The Highest-Quality Tempered Steel With A Torque-Proof Anchor In The Handle. Strong, Durable Tips Are Manufactured With Squar (3)
  • Klein Tools Specializes In Making Some Of The World's Finest Pliers. The High-Leverage Design Of These 8'' Journeyman Diagonal-Cutting Pliers Provides 36% Greater Cutting Power Than Other Pliers. The Angled Head Design Makes Work Easier In Confined Spac (1)
  • Klein Tools Specializes In Making Some Of The World's Finest Pliers. These High-Leverage Side-Cutting Pliers Are Built For Heavy-Duty Cutting With Induction Hardened Knives That Are Built to Last. The High-Leverage Design Provides 46% Greater Cutting An (1)
  • Klein Tools Specializes In Making Some Of The World's Finest Pliers. These Side-Cutting Long-Nose Pliers Have A Heavier Design For Greater Cutting Power. The Extended Handles Provide Added Reach and Leverage. (1)
  • Knife Snap (3)
  • Lanyard Hole Allows for Tethering and Safekeeping (1)
  • Laser Distance Measuring, Laser Pointer, Reverse Contrast LCD, LED and Audible Beep Indications, Auto-Power Off, Pocket Clip (1)
  • Laser:630-680nm (1)
  • Leather construction. (1)
  • Lightweight and Compact (1)
  • Lightweight;Yet Efficient Shear-Type Cable Cutters (1)
  • Lots of Room for Tools (1)
  • Low Battery Indicator, Built-in Test Lead Holders, Backlit Display (1)
  • Low Impedance (LoZ) Mode; Dedicated Mode for Capturing Inrush Current; Integrated Non-Contact Voltage Tester (1)
  • Luminescent glow rods provide added visibility in dark workspaces;Improved glow shines 2X brighter and lasts 2X longer;Thread sections together to customize the length needed for your job - no tools needed;Sets include bullet nose and hook attachments to attach and grab wires (1)
  • Max/Min, Hold and Average Functions; Auto Power Off (2)
  • Metal Belt Clip, Magnetic Flap, Elastic Sides to Fit Various Sizes (1)
  • Metal Stud Offers A Convenient and Easy Way to Bend, Loop and Connect Solid Wire When Installing Outlets and Switches. (1)
  • Newly Crimped on Eyelets Meet or Exceed Original Factory Pulling Strength Requirements (1)
  • No Batteries Required (1)
  • No. 2 Phillips Screwdriver, 3 Wire Stripping Notches (1)
  • Non-conductive fish tape and eyelet tip offer added protection against shock from energized sources. (1)
  • Non-Slip Grip;TPR on Back of Hand for Extra Protection;Cut Resistant (2)
  • Optimized Teeth Pattern for Fast, Consistent Cutting of Steel Including Stainless (1)
  • Oversized (1)
  • Padded Pocket to Accommodate 1-Inch Thick Laptop (1)
  • Patented Magnet Track Secures Level to Surfaces (1)
  • Patented Magnet Track Secures the Level to Any Metal Surface (2)
  • Patented Two-Step Ratchet Mechanism Requires Fewer Strokes Per Cut;Quick Release Lever Opens Blades Easily in Every Cutting Position to Allow Removal of the Cable Before Completion of Cut (1)
  • Perfect For the Trade Apprentice Starting Out (2)
  • Permanent, Laser Etched 1' Increments on the Tape Allow you to More Accurately Measure the Depth of Conduit Runs and Determine the Amount of Tape Left to Pay Out;Non Conductive, Fiberglass Fish Tape Slides Easily Over Existing Wires and Through Multiple Bends (1)
  • Pivoting Light Head (1)
  • Plastic-Dipped, Cushioned Handles (1)
  • Pocket Sized, IR and Probe Thermometer; Hanging Hook for Use with Air Vents (1)
  • Precision Machined; Heat Treated (2)
  • Precision shear-type blades provide square clean cuts on solid copper wire. Curved handles with double-dipped grips makes this stripper/cutter comfortable to use every day. (1)
  • Protective Coating Keeps Hands Free Of Fiberglass Splinters. (1)
  • Pulls Flat Steel Fish Tape (1)
  • Rare Earth Magnet Tips (1)
  • Rare Earth Magnetic Tips; Heavy Duty (1)
  • Rare Earth Magnets, Adjustable Bubble Vial, V-Groove on Top (1)
  • Rare Earth Magnets; Contoured Shape (1)
  • Rare-Earth Magnets (1)
  • Ratcheting Mechanism (2)
  • Reduce Time on Projects with Large Quantities of Conduit Runs (1)
  • Reinforced Bottom (1)
  • Reinforced Head (1)
  • Removable 11 Pocket Tool Caddy, Water Resistant (1)
  • Removable Pouches Allow You to Carry Only the Tools You Need (1)
  • Replaceable Blade Knife (1)
  • Replacement for 625-32, 626, and 627-20 (1)
  • Rotating Cap for Optimum and Precise Control (2)
  • Scraper, File, Stripping Notches, Serrated Blades (1)
  • Screwdriver Leverage Hole In Head to Provide Extra Torque (1)
  • Secure Tongue and Groove Design For Non-Slip Grip - Even With Heavy Pressure. (2)
  • Serrated Blades, Notches (1)
  • Several Calculation Modes to Facilitate Different Temperature Measurement Applications (1)
  • Slide Drive™ (3)
  • Slim Fit for High Dexterity (1)
  • Specially Hardened Wire Cutter in Nose;Hot-Riveted Joint for Smooth Action and no Handle Wobble (1)
  • Split Point Pilot Drill Bit (118°) and Integrated Flange (1)
  • Split Point Pilot Drill Bit to Prevent Bit Walking; Integrated Flange to Prevent the Operator from Drilling Beyond Sheet Metal (2)
  • Spring Loaded (1)
  • Spring Loaded For Opening Action (1)
  • Spring-action Lock (1)
  • Spring-Loaded (1)
  • Standard and Metric Sizes Marked for Fast Adjustment (1)
  • Standard length for most applications. (1)
  • Stay Open Top (1)
  • Stays Cool up to 12 Hours (1)
  • Stitched and Riveted Leather Construction (1)
  • Strips Six Standard Sizes (1)
  • Strong Magnets, Longer Length Bits (1)
  • Synthetic Leather Palm (1)
  • Tapered Nose Design for Working in Confined Spaces;Specially Hardened Wire Cutter in Nose;Hot-Riveted Joint for Smooth Action and no Handle Wobble (1)
  • Telescoping Handle Extends to 39-1/2", 6" dia. Wheels, Molded Kick Plate, Orange Interior, Water Resistant (1)
  • Tenite Plastic for Slip-Resistant Grip and Comfort (2)
  • Tested up to 20kV (3)
  • Tests AFCI and GFCI, Simulates Ground Fault and Arc Flash Conditions, Detects Dual-Open Wiring Fault (1)
  • The Diagonal Cutting Pliers From Klein Tools Feature Solid Construction and Performance For Which Klein Pliers Are Known. Short Jaws and Beveled Cutting Edges Allow For Close Cutting Of Wire. They Are Designed With The Rivet Closer to The Cutting Edge For (1)
  • The Klein 10-In-1 Screwdriver/Nut Driver Multi-Tool Has The Bits to Handle Your Most Common Tasks. From Phillips Or Slotted to Square and Torxâ(R), These Tips Are Precision-Machined For An Exact Fit. The Internal Flanges Inside The Handle Provide Solid, Tw (1)
  • The Klein Tools 14-Piece Electrician's Tool Set Includes A Variety Of Valuable Tools For Any Professional Or Do-It-Yourself Electrician. The Set Includes 4 Sets Of Pliers and 5 Popular Screwdriver Sizes. It Also Comes With A Tape Measure, Wire Stripper, (1)
  • The Klein Tools 2000 Series Pliers Are Strong Enough to Cut Acsr, Screws, Nails, and Most Hardened Wire. This High-Leverage Diagonal-Cutting Plier Has 36% More Cutting Power Because The Rivet Is Placed Closer to The Cutting Edge. An Angled Head Design M (1)
  • These Klein Tools High-Leverage Side-Cutting Pliers Are Also Designed to Pull Flat Steel Fish Tapes Without Damaging The Tape. Induction Hardened Knives Can Also Cut Acsr, Screws, Nails, and Most Hardened Wire. The High-Leverage Design Provides 46% Grea (1)
  • Tight Space Cutting (1)
  • Tip is precision-machined to provide a more consistent geometric symmetry than conventional Phillips-tip screwdrivers. (1)
  • Tip-Ident Quickly Identifies Nut Driver Size (4)
  • Tip-Ident® Quickly Identifies the Screwdriver Type and Tip Orientation (1)
  • Tip-Ident® Quickly Identifies the Type of Screwdriver and Tip Orientation (1)
  • Touchscreen Capability on Index Finger;Non-Slip Grip (2)
  • Tough, Durable Rubber Feet Protect from the Elements (2)
  • Tough, durable rubber feet protect from the elements. (5)
  • Transmitter docks in Receiver Transmitter integrated GFCI outlet tester in receiver (1)
  • Twist On/Off Removable Led Light with Swivel Hook and Magnet, Orange Interior for Easy Tool Visibility, Fully Molded Bottom Protects From the Elements, Shoulder Strap and Padded Handles (1)
  • Uncluttered, easy to read bold lines every 1/8" (1)
  • Unique jaw design provides multiple points of contact for maximum torque. (1)
  • US Patent 10,073,142, D750,985 and Other Patents Pending (1)
  • Water Resistant (1)
  • Wide Foot Pedal for Stability, Leverage and Comfort (1)
  • Wire Looping and Bending Holes;Precision-Ground Stripping Holes for Easy Removal of Insulation;Easy-to-Read Wire Gauge Markings on Both Sides for Stripping in Either Direction;Black-Oxide Finish Resists Corrosion (1)
  • Worklight with Flashlight Included (1)
  • Wrench Assist for Additional Torque (1)
  • Wrench Assist for Greater Torque (4)
  • Wrench-Assist For Added Torque (1)
  • Show More...

• Shank Length

  

  • 1.266" (3.2 cm) (1)
  • 1.297" (3.3 cm) (2)
  • 1.5" (3.8 cm) (3)
  • 1-17/64 in;32.1 mm (1)
  • 12 in;304.8 mm (1)
  • 2 to 4 (5.1 to 10.2 cm) (1)
  • 2" (5.1 cm) (1)
  • 2.5 in;63.5 mm (1)
  • 2.797 in;71 mm (1)
  • 2.797" (7.1 cm) (1)
  • 2.95 in;75 mm (1)
  • 2.953 in;75 mm (1)
  • 3 in;76.2 mm (3)
  • 3" (7.6 cm) (1)
  • 3" (7.6 cm) (3)
  • 3.1 (7.9 cm)Special FeaturesIncreased Usability and Readability Plus a Wider Torque Range (5-40 in. lbs)StandardN.I.S.T. Traceable Calibration Certificate; ASME B107.300-2010TypeTorque Screwdriver SetWeight1.0 lb (0.5 kg) AD6.027720201103C092644551635000926445516355704L24112403Brand NameKlein ToolsBelt Width2 (5.1 cm) (1)
  • 3.1" (7.9 cm) (1)
  • 3.25" (8.3 cm) (1)
  • 3.5" (8.9 cm) (1)
  • 3.625" (9.2 cm) (1)
  • 3.625;4.313 (1)
  • 4 (1)
  • 4 in;101.6 mm (11)
  • 4 to 8 in;101.6 to 203.2 mm (1)
  • 4" (10.2 cm) (1)
  • 4" (10.2 cm) (10)
  • 4-7/64 in;104.4 mm (1)
  • 6 (15.2 cm)Shank TypeRoundSpecial FeaturesSlim Profile TipStandardASTM F-1505-16, IEC 60900:2018Tip Size3/16 (0.5 cm) (1)
  • 6 in;152.4 mm (5)
  • 6" (15.2 cm) (1)
  • 6" (15.2 cm) (5)
  • 7 in;177.8 mm (3)
  • 7" (17.8 cm) (4)
  • 7.75" (19.7 cm) (1)
  • 8" (20.3 cm) (5)
  • 9-7/64 in;231.4 mm (1)
  • Double-End: 3.5" (8.9 cm); Single-End: 5.75" (14.6 cm) (1)
  • Long 2.09" (5.3 cm), Short 0.34" (0.9 cm) (1)
  • Show More...

• Package Quantity

  

  • 1 (4)
  • 1 ct (26)
  • 1 CT;12 PK (1)
  • 1 CT;3 PK (3)
  • 1 CT;4 Pk (2)
  • 1 CT;6 Pk (10)
  • 10 (2)
  • 100 (2)
  • 12 PK;1 CT (4)
  • 15 (1)
  • 2 (2)
  • 2 Bits (9)
  • 2 PK;1 CT (1)
  • 26 (1)
  • 26 PK (1)
  • 3 (4)
  • 3 CT (2)
  • 4 CT (1)
  • 5 (11)
  • 6 CT (16)
  • 6 PK;1 CT (1)
  • 72 (1)
  • Show More...

• Response Time

  

  • <0.25s (1)
  • <150ms (1)
  • 3 Seconds (1)
  • IR <500 ms; Probe <20 s (1)
  • Show More...

• Package Type

  

  • Carrying Case (1)
  • Carton (1)
  • Show More...

• Category Description

  

  • ADHESIVES (1)
  • BITS, BLADES, AND HOLE SAWS (57)
  • Fuses & Fuse Accessories (2)
  • HAND TOOLS (315)
  • Job Site & Safety Apparel (16)
  • SAFETY PRODUCTS (5)
  • SPLICE KITS (1)
  • TEST EQUIPMENT, TESTERS AND MULTIMETERS (30)
  • TOOL BAG/POUCHES (51)
  • TOOL BAG/POUCHES ACCESSORIES (Belts, Pads, etc.) (7)
  • WIRE LUBE, MARKERS, & TIES (2)
  • Show More...

• Configuration

  

  • 1 to 1/4-Inch Taper (1)
  • 1-1/8 to 1/4-Inch Taper (1)
  • Hard Hat (3)
  • Magnetic (6)
  • Mini (5)
  • Non-Magnetic (12)
  • Set with Case (1)
  • Show More...

• Color Code

  

  • — (2)
  • BLACK (1)
  • BLUE (5)
  • BROWN (4)
  • GREEN (1)
  • ORANGE (4)
  • RED (10)
  • YELLOW (6)
  • Yes (1)
  • Show More...

• Size

  

  • 1/2", 3/4" (1)
  • 1/2", 3/8", 5/16", 1/4", 7/32", 3/16", 5/32", 9/64", 1/8", 7/64", 3/32" (1)
  • 1/2", 9/16" 5/8", 3/4" (1)
  • 13 x 29.5 (33 x 74.9 cm) (1)
  • 19 oz (0.6 L) (1)
  • 3/16" to 7/8" (4.8 to 22.2 mm) (1)
  • 3/16", 7/32", 1/4", 5/16", 3/8" (1)
  • 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8" (1)
  • 3/32", 7/64", 1/8", 9/64", 5/32", 3/16",7/32", 1/4", 5/16", 3/8" (1)
  • 3/32", 7/64", 7/32", 1/8", 9/64", 5/32", 3/16", 1/4", 5/16", 3/8" (1)
  • 3/64", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32" (1)
  • 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4" (1)
  • 7.9 x 0.6 x 1.6 in;20.1 x 1.5 x 4.1 mm (1)
  • 7/8" to 1-3/8" (22.2 to 34.9 mm) (1)
  • 72-Count Bucket (1)
  • Extra Large (4)
  • Extra-Large (3)
  • Large (10)
  • M/L (1)
  • One Size Fits Most (2)
  • Small (1)
  • X-Large (2)
  • XX-Large (1)
  • Show More...

• Type

  

  • 0.80 oz (22.7 g) (1)
  • 7-in-1 Multi-Bit (1)
  • ACCU-BEND™ Conduit and Pipe (2)
  • Adjustable Pump Pliers (1)
  • Adjustable-Length Screwdriver (1)
  • AFCI/GFCI Electrical Battery Operated Outlet Tester (1)
  • All-Purpose (1)
  • All-Purpose Pliers - Crimping (1)
  • All-Purpose Pliers - Spring Loaded (1)
  • Apprentice Tool Set (2)
  • Assisted-Open (1)
  • Aviation (1)
  • Awl (1)
  • Benfield® Head Iron Conduit Bender (1)
  • Bi Metal (1)
  • Bluetooth® Wireless Speaker (1)
  • BROAD HEAD (1)
  • Bubble with Adjustable Vial (1)
  • BX and Armored Cable Cutter (1)
  • Cable Cutter (5)
  • Carbide Hole Cutter (2)
  • Carbon Monoxide Meter (1)
  • CE Cut Level 5 (2)
  • CLAMP METER (1)
  • Clamp Meter with AC and Type K Thermocouple Thermometer (1)
  • Closed Case, Double Sided (1)
  • Closed Case, Double Sided Single Non-Magnetic Hook (1)
  • Closed Case, Double Sided, Magnetic Hook (3)
  • COMPACT (1)
  • Conduit Bender (1)
  • Conduit Bender Handle (2)
  • Conduit Reamer Drill Head for 1/2", 3/4", 1" (1)
  • Conduit Reamer Replacement Blade Kit (1)
  • Connector Crimping (1)
  • Cooling Towel (1)
  • Diagonal Cutting Pliers (15)
  • Digital Light Meter (1)
  • Digital Thermometer (2)
  • Digital Voltage and Continuity Tester (1)
  • Drill Tap Kit (1)
  • Dual Laser Infrared Thermometer (1)
  • Dual Wire Cutter Crimper Stripper (1)
  • Dual-Laser Infrared Thermometer (1)
  • Electricians Tool Set (2)
  • ELECTRONIC (1)
  • Electronic Products (1)
  • Electronic Tester (1)
  • Electronics (1)
  • Extra Capacity Adjustable Wrench (3)
  • Extra Slim Adjustable Wrench (3)
  • Fixed Blade Screwdriver (1)
  • Flex Bit, Wire Placement Tool, and Grip Kit (1)
  • Flexible AC Current Clamp (1)
  • Foam (1)
  • Folding Hex Key (1)
  • Folding Jab Saw (1)
  • Folding Set (3)
  • GFCI and Standard Receptacle Tester (2)
  • Hard Side Cooler (1)
  • Headlamp (1)
  • HEAVY DUTY (3)
  • Heavy Duty High Leverage Crimping Pliers (1)
  • Heavy Duty High Leverage Side Cutting/Crimping Pliers (1)
  • Heavy Duty, Shear Cutting (1)
  • Hex Driver (4)
  • High Leverage Side Cutting/Connector Crimping Pliers (2)
  • High Leverage Side Cutting/Pulling Pliers (1)
  • High Leverage Stripping Crimping Shearing Side-Cut Hybrid Plier (1)
  • High Tension (1)
  • Hole Cutter Pilot Bit (1)
  • Hollow (5)
  • Hollow Shaft Nut Driver Set (1)
  • HVAC Nylon Tie Tensioning Tools (1)
  • Insulated, Interchangeable Blade (1)
  • Iron Bender Head (1)
  • Ironworker's Pliers (1)
  • Journeyman Combination Pliers (1)
  • Knife and Scissors (1)
  • Knife Sharpener (1)
  • Knockout Punch with Wrench (1)
  • K-Type Banana Plug Adapter (1)
  • K-Type Thermocouple, High Temperature with Adapter (1)
  • Large Cable (2)
  • Lockout with Interlocking Tabs (1)
  • Long Nose Diagonal Cutting Pliers (1)
  • Long Nose Pliers (3)
  • Long Nose Side Cutting Pliers (8)
  • MAGNETIC (2)
  • Magnetic Lighted Torpedo Billet (1)
  • Magnetic Wristband (1)
  • Master Electrician's Torque Wrenches (1)
  • NM-B Cable 12/2 and 14/2 (1)
  • Non-Contact (2)
  • Non-Contact Voltage Tester (1)
  • Nut Driver Kit (1)
  • Open Jaw Fork Current Meter (1)
  • Padded Strapped Backpack (1)
  • Padded Tool Belt (1)
  • Phone Holder with Belt Clip (6)
  • Pinless Moisture Meter (1)
  • Pocket Infrared Thermometer with Laser and Temperature Probe (1)
  • Pocket Knife (4)
  • Pocket Screwdriver (1)
  • Pole & Tree Climbers Straps (1)
  • Pouch (1)
  • Quick Connect (1)
  • Ratcheting Cable Cutter (1)
  • RECESSED (1)
  • Rechargeable Battery (1)
  • Replacement Blade (2)
  • Replacement Blade Set (1)
  • Replacement Blades (1)
  • Replacement Tap (2)
  • Self-Leveling Laser Level (1)
  • Side Cutting Pliers (9)
  • Side Cutting/Crimping (1)
  • Socket Wrench Set (1)
  • Soft Side Cooler (1)
  • Soft Sided (3)
  • Solid-State, Low Impedance, Electronic Voltage Tester (1)
  • STANDARD (1)
  • Stand-Up (1)
  • Step Drill Bit (2)
  • Tamperproof TORX ® (1)
  • Telescoping Magnetic LED (1)
  • Tool Backpack (2)
  • Tool Bag (1)
  • Torpedo (3)
  • Torque Screwdriver Set (1)
  • Touchscreen (1)
  • Tubing Cutter (2)
  • Twist Rotating Head (1)
  • Type 1 (5)
  • UTILITY (2)
  • Wind Proof Hinged Balaclava (1)
  • Zipper Pouch (1)
  • Show More...