Narrow By:

• Manufacturer: Bridgeport

• Product Type

  

  • 1 1/2" Screw-In Conn Ins (1)
  • 1 1/2" Squeeze Conn. Ins. Zinc (1)
  • 1 1/4" Screw-In Conn Ins (1)
  • 1 1/4" Screw-In Conn. (1)
  • 1 1/4" Squeeze Conn. Ins. Zinc (1)
  • 1 LQDT. Conn. Ins. (1)
  • 1 LQDT. Conn. Ins. 90 Deg (1)
  • 1" Alum Cord Grip, .450-.560 (1)
  • 1" Alum Cord Grip, .550-.650 (1)
  • 1" Alum Cord Grip, .750-.850 (1)
  • 1" Alum Cord Grip, .850-.950 (1)
  • 1" Alum Cord Grip, .950-1.050 (1)
  • 1" Angle Conn. Ins. Zinc (1)
  • 1" C CVR/Gask Cond Bdy (1)
  • 1" LB CVR/Gask Cond Bdy (1)
  • 1" LB CVR/Gask RT Cond Bdy (1)
  • 1" LL CVR/Gask Cond Bdy (1)
  • 1" LR CVR/Gask Cond Bdy (1)
  • 1" Non-Metallic LQDT. (1)
  • 1" Parallel Conduit Clamp (1)
  • 1" Screw-In Conn. Ins. (1)
  • 1" Screw-In CPLG. (1)
  • 1" Sealing Ring W/Retainer (1)
  • 1" Squeeze Conn. Ins. Zinc (1)
  • 1" SS Split Cuplg Steel (1)
  • 1" Steel Cord Grip, .750-.850 (1)
  • 1" T CVR/Gask Cond Bdy (1)
  • 1/2" 45 Deg FMC Connector (1)
  • 1/2" 90 Deg Conn. Ins. Zinc (1)
  • 1/2" Ac/MC/FMC Snap-In Conn (1)
  • 1/2" Alum Cord Grip, .350-.450 (1)
  • 1/2" Alum Cord Grip, .450-.560 (1)
  • 1/2" Barrel Type Dual Cable NM (1)
  • 1/2" Combo. CPLG. (1)
  • 1/2" DBL Barrel Duplex Conn (1)
  • 1/2" Insul DBL Barrel Duplex C (1)
  • 1/2" LB CVR/Gask Cond Bdy (1)
  • 1/2" LQDT Conn. Ins. (1)
  • 1/2" LQDT. Conn. Ins. (1)
  • 1/2" Non-Metallic LQDT. (1)
  • 1/2" Plastic Conn. (1)
  • 1/2" PVC JCKTD MC Conn (1)
  • 1/2" Screw-In Conn. Ins. (1)
  • 1/2" Screw-In CPLG. (1)
  • 1/2" Squeeze Conn. (1)
  • 1/2" Squeeze Conn. Ins. (1)
  • 1/2" Steel Cord Grip, .450-.56 (1)
  • 1/2" Steel Rigid Raintight Con (1)
  • 1/2" Steel Rigid Raintight Cup (1)
  • 1/2" Uf Conn. (1)
  • 1-1/2 LB CVR/Gask Cond Bdy (1)
  • 1-1/2 LB RGD Cond. Body Alum (1)
  • 1-1/2 LL CVR/Gask Cond Bdy (1)
  • 1-1/2 LR CVR/Gask Cond Bdy (1)
  • 1-1/2" Angle Conn. Ins. Zinc (1)
  • 1-1/2" Angle Conn. Mall (1)
  • 1-1/2" C CVR/Gask Cond Bdy (1)
  • 1-1/2" DCX MC Connector (1)
  • 1-1/2" Squeeze Conn. (1)
  • 1-1/2" T Combo Cond. Body Asm (1)
  • 1-1/2" Two Screw MC Connector (1)
  • 1-1/4 LB CVR/Gask Cond Bdy (1)
  • 1-1/4 LL CVR/Gask Cond Bdy (1)
  • 1-1/4 LR CVR/Gask Cond Bdy (1)
  • 1-1/4" Angle Conn. Ins. Zinc (1)
  • 1-1/4" Angle Conn. Mall (1)
  • 1-1/4" C CVR/Gask Cond Bdy (1)
  • 1-1/4" Sealing Ring W/Retaine (1)
  • 1-1/4" T Combo Cond. Body Asm (1)
  • 1-1/4" Two Screw MC Connector (1)
  • 2" 90 Deg Conn. (1)
  • 2" 90 Deg Conn. Ins. Zinc (1)
  • 2" C CVR CVR/Gask Cond Bdy (1)
  • 2" LB CVR/Gask Cond Bdy (1)
  • 2" LL CVR/Gask Cond Bdy (1)
  • 2" LR CVR/Gask Cond Bdy (1)
  • 2" Mogul Conduit Body (1)
  • 2" Parallel Conduit Clamp (1)
  • 2" Screw-In Conn. Ins. (1)
  • 2" Sealing Ring W/Retainer (1)
  • 2" Serv. Entr. LB (1)
  • 2" Squeeze Conn. Ins. Zinc (1)
  • 2" T Combo Conduit Body Asm (1)
  • 2" Two Screw MC Connector (1)
  • 2-1/2" LQDT. Conn. 90 Deg (1)
  • 2-1/2" MC Connector (1)
  • 2-1/2" Rain Tight CPLG (1)
  • 2-1/2" Rain Tight Ins Conn (1)
  • 2-1/2" Squeeze Conn. (1)
  • 3 1/2" Angle Conn. (1)
  • 3" 90 Deg FMC Connector (1)
  • 3" Angle Conn. (1)
  • 3" LQDT. Conn. 90 Deg (1)
  • 3" Raintight CPLG (1)
  • 3" Raintight Ins Connector (1)
  • 3" Sealing Ring W/Retainer (1)
  • 3" Squeeze Conn. (1)
  • 3" U-Bolt Mall Cond Clamp (1)
  • 3/0-4/0 Serv Entr Strap (1)
  • 3/4 Angle Conn. (1)
  • 3/4 LQDT. Conn. Ins. Zinc (1)
  • 3/4 LQDT.Conn.Ins. 90 Deg Zinc (1)
  • 3/4" 90 Deg Conn. Ins. Zinc (1)
  • 3/4" 90 Deg NMLTS Screw-On Con (1)
  • 3/4" Ac/MC/FMC Snap-In Conn (1)
  • 3/4" Alum Cord Grip, .150-.250 (1)
  • 3/4" Alum Cord Grip, .650-.750 (1)
  • 3/4" Alum Cord Grip, .750-.850 (1)
  • 3/4" Barrel Type NM-B Cable CO (1)
  • 3/4" C CVR/Gask Cond Bdy (1)
  • 3/4" Combo. CPLG. (1)
  • 3/4" DBL Barrel Duplex Conn (1)
  • 3/4" E-Z Lock Assy (1)
  • 3/4" Insul DBL Barrel Duplex C (1)
  • 3/4" K.O to Multi Port NM Conn (1)
  • 3/4" LB CVR/Gask Cond Bdy (1)
  • 3/4" LB CVR/Gask RT Cond Bdy (1)
  • 3/4" LL CVR/Gask Cond Bdy (1)
  • 3/4" LLR CVR/Gask RT Cond Bdy (1)
  • 3/4" LR CVR/Gask Cond Bdy (1)
  • 3/4" Non-Metallic LQDT. (1)
  • 3/4" Screw-In Conn. Ins. (1)
  • 3/4" Screw-In CPLG. (1)
  • 3/4" Sealing Ring W/Retainer (1)
  • 3/4" Squeeze Conn. Ins. Zinc (1)
  • 3/4" SS Slip Culpg Steel (1)
  • 3/4" Steel Cord Grip, .150-.25 (1)
  • 3/4" Steel Cord Grip, .250-.35 (1)
  • 3/4" Steel Cord Grip, .350-.45 (1)
  • 3/4" Steel Cord Grip, .550-.65 (1)
  • 3/4" Steel Rigid Raintight Con (1)
  • 3/4" Steel Rigid Raintight Cup (1)
  • 3/4" T Combo Conduit Body Asm (1)
  • 3/4" Uf Conn. (1)
  • 3/8 90 Deg Conn. (1)
  • 3/8 LQDT. Conn. (1)
  • 3/8 LQDT. Conn. 90 Deg (1)
  • 3/8 Squeeze Conn. (1)
  • 3/8" 1-Screw NM Cable Conn. (1)
  • 3/8" 90 Deg Conn. Ins. Zinc (1)
  • 3/8" Angle Conn. (1)
  • 3/8" Cut-In Snap Lock (1)
  • 3/8" Dup Quick Install Flex CN (1)
  • 3/8" Green Ins HCF Cable Conn (1)
  • 3/8" Ins SG Type Duplex Conn (1)
  • 3/8" Non-Metallic LQDT (1)
  • 3/8" PVC JCKTD MC Conn (1)
  • 3/8" Quick Install Flex Conn (1)
  • 3/8" Screw-In Conn. (1)
  • 3/8" Snap-In 90 Deg FMC Conn (1)
  • 3/8" Snap-In FMC Connector (1)
  • 3/8" Snap-In Ins Ac/MC Connect (1)
  • 3/8" Snap-In Insulated Conn (1)
  • 3-1/2 SPLT GND BSH W/LG #6-3/0 (1)
  • 3-1/2" FMC 90 Degree Conn (1)
  • 3-1/2" LQDT. Conn. (1)
  • 3-1/2" LQDT. Conn. 90 Deg (1)
  • 3-1/2" Sealing Ring W/Retaine (1)
  • 3-1/2" Serv. Entr. Cap Clamp (1)
  • 3-1/2" Squeeze Conn. (1)
  • 3-1/2" Squeeze Conn. Zinc (1)
  • 4" Angle Conn. (1)
  • 4" FMC 90 Degree Conn (1)
  • 4" LQDT. Conn. (1)
  • 4" LQDT. Conn. 90 Deg (1)
  • 4" Sealing Ring W/Retainer (1)
  • 4" SPLT GND BSH W/Lug #6-3/0 (1)
  • 4" SQ Box, 1-1/2" Deep, Drawn (1)
  • 4" SQ Box, 2-1/8" DP, Welded 1 (1)
  • 4" Squeeze Conn. (1)
  • 4" Squeeze Conn. Zinc (1)
  • 90° Connector (17)
  • 90°Connector (17)
  • Ac/MC Cable Bracket NM (1)
  • AC/MC Single Screw Strap Type Connector (5)
  • Anti-Short Bush (1)
  • Box Extender (2)
  • Cable Stacker (1)
  • Clamp-On Entrance Cap (9)
  • Combination Coupling (3)
  • Cord Grip Connector (6)
  • Double Snap Cable Connector (1)
  • Flexible Connector (5)
  • Insulating Bushing (1)
  • Liquid Tight Straight Connector (8)
  • No-1 Anti-Short Bushing (1)
  • No-2 Anti-Short Bushing (1)
  • No-3 Anti-Short Bushing (1)
  • One Hole Strap (1)
  • Parallel Conduit Clamp (1)
  • Romex Connector (4)
  • Safety Plate (1)
  • Screw-On Liquid Tight Connector (1)
  • Sealing Ring (1)
  • Service Entrance Fitting (5)
  • Service Entrance Kit (1)
  • Set Screw Connector (1)
  • Squeeze Connector (16)
  • Strap (3)
  • Strap Connector (14)
  • Wire Holder (2)
  • Show More...

• Brand

  

  • Bridgeport (187)
  • Bridgeport Fittings (99)
  • Show More...

• Material

  

  • Aluminum (10)
  • Cast Zinc (2)
  • Die Cast Zinc (11)
  • Die-Cast Zinc (42)
  • Die-Cast Zinc Spring Steel;Plastic (Bush) (1)
  • Malleable Iron (25)
  • Malleable Iron (Clamps);Steel (Bolt and Nut) (1)
  • Malleable Iron Clamp, Steel U-Bolt and Nuts (1)
  • Malleable Iron Clamps, Steel Bolt and Nut (2)
  • Nylon (4)
  • Plastic (11)
  • Plastic/Zinc (1)
  • Polypropylene (2)
  • Porcelain (2)
  • PVC (2)
  • Steel (30)
  • Steel;Polyethylene (Seal) (1)
  • Zinc Alloy (2)
  • Zinc Cast (14)
  • Zinc Die Cast (51)
  • Zinc Die Cast Body with Steel Saddle Clamps and Insulated Throat (1)
  • Show More...

• Trade Size

  

  • 0 (1)
  • 0.5 (7)
  • 0.75 (7)
  • 1 (26)
  • 1.25 (2)
  • 1.5 (2)
  • 1/2 (12)
  • 1/2 in (12)
  • 1-1/2 (20)
  • 1-1/2 in (1)
  • 1-1/4 (19)
  • 1-1/4 in (1)
  • 2 (14)
  • 2 in (9)
  • 2.5 (2)
  • 2.5 in (1)
  • 2-1/2 (6)
  • 2-1/2 IN (3)
  • 3 (10)
  • 3 1/2 (2)
  • 3.5 (2)
  • 3/4 (15)
  • 3/4 in (13)
  • 3/8 (13)
  • 3/8 in (8)
  • 3-1/2 (4)
  • 4 (8)
  • Show More...

• Size

  

  • 1 (24)
  • 1 1/2 (3)
  • 1 1/4 (3)
  • 1/2 (25)
  • 1/2 in (8)
  • 1-1/2 (11)
  • 1-1/2 DEEP (1)
  • 1-1/2 in (1)
  • 1-1/4 (11)
  • 1-1/4 - 3 (1)
  • 1-1/4 in (1)
  • 14/2 AWG;12/2 AWG (1)
  • 14/3 AWG;12/3 AWG (1)
  • 2 (17)
  • 2 1/2 (3)
  • 2.5 (1)
  • 2-1/2 (6)
  • 2-1/2 in (1)
  • 2-1/8 DEEP (1)
  • 2-7/8 (1)
  • 3 (10)
  • 3 1/2 (3)
  • 3/4 (31)
  • 3/4 in (5)
  • 3/8 (26)
  • 3/8 in (3)
  • 3/8 lag screw approx.1" by 15/16 (1)
  • 3/8" (1)
  • 3-1/2 (5)
  • 4 (8)
  • 4.23 (1)
  • 5/16 in (1)
  • Show More...

• Model

  

  • MWH-1 (1)
  • RWH-1 (1)
  • Show More...

• Finish

  

  • As Cast (2)
  • Ball burnish (56)
  • Ball Burnished;Mirror Smooth (44)
  • Ball Burnished;Mirror Smooth;Zinc Electro-Plate (Strap) (3)
  • Enamel (25)
  • Enamel paint (5)
  • Green Colored (1)
  • Hot Dip Galvanized (1)
  • Hot-Dip Galvanize (3)
  • Natural (3)
  • NO FINISH (13)
  • Plain (10)
  • Zinc Coated (1)
  • Zinc Electroplated (63)
  • Zinc Electro-Plated (1)
  • Zinc Plated (4)
  • Show More...

• Color

  

  • Beige (3)
  • Black (2)
  • Blue (3)
  • Gray (1)
  • Gray;Grey (1)
  • Green (13)
  • Grey with Black Insulator (2)
  • Purple (3)
  • Red (9)
  • White (4)
  • Yellow (1)
  • Yellow (Handle) (1)
  • Show More...

• Length

  

  • 1 in (6)
  • 1.38 in (1)
  • 1.445 in (1)
  • 1/2 in (1)
  • 11/16 in (1)
  • 1-1/16 in (4)
  • 1-1/4 in (2)
  • 1-1/8 in (7)
  • 1-11/16 in (1)
  • 13/16 in (1)
  • 1-3/4 in (1)
  • 1-3/8 in (1)
  • 1-3/8 in (Strap Center point Length) (2)
  • 15/16 in (1)
  • 1-5/16 in (7)
  • 1-5/8 in (3)
  • 1-7/16 in (1)
  • 1-7/8 in (1)
  • 1-9/16 in (1)
  • 2 in (4)
  • 2.75 (1)
  • 2.90 in (1)
  • 2-1/2 in (2)
  • 2-1/4 in (3)
  • 2-1/8 in (1)
  • 2-3/4 in (1)
  • 2-5/8 in (2)
  • 2-7/16 in (1)
  • 2-7/8 in (1)
  • 2-9/16 in (1)
  • 3.75 (1)
  • 3/4 in (1)
  • 3/8 in (1)
  • 3-1/4 in (1)
  • 3-5/16 in (1)
  • 3-9/16 in (1)
  • 4 (3)
  • 4-1/4 in (1)
  • 4-1/8 in (1)
  • 4-3/4 in (2)
  • 4-7/16 in (1)
  • 5/8 in (3)
  • 5-1/2 in (1)
  • 5-11/16 in (1)
  • 5-5/8 in (1)
  • 6 in (1)
  • 6-1/2 in (2)
  • 6-1/4 in (1)
  • 6-3/16 in (1)
  • 7/16 in (1)
  • 7/8 in (3)
  • 9/16 in (2)
  • Show More...

• Diameter

  

  • 0.618 in (1)
  • 0.975 in (4)
  • 1 in (1 Hole);7/8 in (2 Hole);1-5/16 in (3 Hole) (1)
  • 1.220 in (2)
  • 1-1/2 in (3)
  • 1-1/8 in (4)
  • 1-11/16 in (3)
  • 13/16 in (1)
  • 1-3/16 in (1)
  • 1-3/4 in (2)
  • 1-3/4 in (3 Hole);1-1/8 in (4 Hole) (2)
  • 1-3/8 in (1)
  • 15/16 in (3)
  • 1-7/16 in (3)
  • 2 in (1)
  • 2-1/16 in (1)
  • 2-1/2 in (1)
  • 2-1/4 in (2)
  • 2-1/8 in (1)
  • 2-11/16 in (2)
  • 2-3/16 in (1)
  • 2-5/8 in (1)
  • 2-7/16 in (1)
  • 2-9/16 in (1)
  • 3 in (1)
  • 3/8 in (2 Hole);7/16 in (3 Hole) (1)
  • 3-1/8 in (1)
  • 3-13/64 in (1)
  • 3-3/8 in (2)
  • 3-5/16 in (1)
  • 3-7/8 in (1)
  • 4-1/8 in (1)
  • 4-7/16 in (1)
  • 4-7/8 in (1)
  • 5/16 in (1)
  • 7/16 in (1 Hole);5/8 in (2 Hole);3/4 in (3 Hole) (1)
  • 7/16 in (2 Hole);1/2 in (3 Hole) (1)
  • 7/16 in (2 Hole);5/8 in (3 Hole) (1)
  • 9/16 in (1)
  • 9/16 in (1 Hole);3/4 in (2 Hole);1 in (3 Hole) (1)
  • Show More...

• Connection Type

  

  • Clamp-On (9)
  • Combination (3)
  • FMC (11)
  • Liquidtight (6)
  • Screw (5)
  • Screw;Strap (11)
  • Screw-In (3)
  • Screw-On (1)
  • Set Screw (3)
  • Single Screw Strap-Type (2)
  • Snap-In (1)
  • Snap-On (2)
  • Squeeze (16)
  • Straight (8)
  • Threaded (7)
  • U Shaped (1)
  • Show More...

• Knockout Size

  

  • 0.370 in (2)
  • 1 in (1)
  • 1/2 in (2)
  • 1-1/2 in (1)
  • 1-1/4 in (2)
  • 19/32 in (1)
  • 2 in (1)
  • 3/4 in (2)
  • 3/8 in (2)
  • Show More...

• Number Of Holes

  

  • 1 (3)
  • 1;2;3 (2)
  • 1;3 (1)
  • 2;3 (3)
  • 3;4 (2)
  • 4 (1)
  • Show More...

• Width

  

  • 1.375 (1)
  • 1.5 (1)
  • 1.625 (1)
  • 11/16 in (1)
  • 1-1/8 (1)
  • 1-13/16 in (1)
  • 1-15/16 in (1)
  • 1-3/8 in (1)
  • 1-5/8 in (1)
  • 1-7/8 in (1)
  • 2 (1)
  • 2.25 (1)
  • 2-11/16 in (1)
  • 2-3/8 in (1)
  • 2-7/16 in (1)
  • 3 in (1)
  • 3.5 (1)
  • 3-1/16 in (1)
  • 3-1/4 in (1)
  • 4 (2)
  • 4.23 in (1)
  • 4.25 (1)
  • 4.75 (1)
  • 4-1/2 in (1)
  • 5.1875 (1)
  • 5/8 in (1)
  • 5-3/4 in (1)
  • 7-7/16 in (1)
  • 9 in (2)
  • Show More...

• Mounting Type

  

  • Flush Mount (5)
  • No (2)
  • Screw Mount;Nail Tab Mount (2)
  • Show More...

• Cable Size

  

  • #3/0,#4/0 (1)
  • 1-1/4 to 3 in (2)
  • 12/4, 10/2, 10/3 (1)
  • 14/2 to 10/3 (2)
  • 14/2, 12/2 (1)
  • 14/3, 12/3 (1)
  • Show More...

• Number Of Conductors

  

  • 1 (16)
  • 1 Cable (16)
  • up to 6 max (1)
  • Show More...

• Includes

  

  • (2) Screw (11)
  • Clamp (9)
  • Show More...

• For Use With

  

  • 14/2 to 10/3 AWG (0.40 in to 0.63 in) Aluminum and Steel AC/MC/MCI-A/HCF;3/8 in Aluminum and Steel FMC/RWFMC (1)
  • AC/MC Cable (9)
  • AC/MC/HCF Cable 10/4 AWG(0.61 in) to 8/3 AWG (0.87 in) (1)
  • AC/MC/MCI-A 14/2 AWG (0.375 in) to 10/3 AWG (0.625 in) HCF/HCFMCI-A 3/8 in FMC and 14/2 to 10/3 AWG NM Cable (1)
  • Connect AC/MC/MCI-A/NM-B Cable to Box or Enclosure;12/2 AWG(0.44 in) to 10/3 AWG (0.53 in) For use with HCF/HCFMCI-A (1)
  • Connect MC &AC or 3/8 in Flexible Metal Conduit to box or enclosure;14/2 AWG (0.38 in) to 10/3 AWG (0.61 in)AC/MC/MCI-A/HCF/HCFMCIA (1)
  • Connect Single Round Service Entrance Cable to Box or Enclosure (5)
  • Connecting 14/2 AWG (0.38 in) to 10/3 (.53 in) Armored;Metal Clad Cable to Box or Enclosure MC/MCI-A/HCFMCI-A (1)
  • Connecting Nonmetallic Cable to Box or Enclosure (6)
  • EMT Conduit (3)
  • Flexible Metal Conduit (14)
  • Flexible Metal Conduit;12/3 to 10/3 steel or aluminum MC cable (2)
  • Inspection;Pulling and Maintenance (5)
  • Metallic and Non-Metallic "Type B" Liquid Tight Conduit (14)
  • Metallic or Nonmetallic Electrical Boxes (2)
  • Non-Metallic "type B" Liquid Tight Conduit. PVC Construction with Zinc Locknut (1)
  • Portable Cord (6)
  • Protection of Electrical;Voice;Data and Video Cables (1)
  • Rigid Conduit;IMC Conduit (10)
  • Rigid;IMC and EMT conduit (1)
  • Service Entrance Mast (2)
  • Snap-On Type Strap used to Support Round Steel or Aluminum Metal Clad Cable;Diameter for 14/2 AWG (0.475 in) to 12/2 AWG (0.525 AWG) (1)
  • Snap-On Type Strap used to Support Round Steel or Aluminum Metal Clad Cable;Diameter for 14/3 AWG (0.540 in) to 12/3 AWG (0.590 AWG) (1)
  • Support Metal Clad Cable (1)
  • Supporting AC/MC/FMC;Accomodates Steel and Aluminum AC/MC/FMC;AC/MC/MCIA with an Outer Diameter of 0.425 in (14/2 AWG) to 0.61 in (10/3 AWG) in FMC in 3/8 in Trade Size (1)
  • Used to Connect Non-Metallic Cable to Box or Enclosure (4)
  • Wire Installation (1)
  • Show More...

• Sub Brand

  

  • Bridgeport (12)
  • Mighty-Hold(TM) (1)
  • Show More...

• Special Features

  

  • 1 hole 1" dia., 3 holes 7/8" dia., 3 holes 1-5/16" dia. (1)
  • 1 hole 7/16" dia., 2 holes 5/8" dia., 3 holes 3/4" dia. (1)
  • 1 hole 9/16" dia., 2 holes 3/4" dia., 3 holes 1" dia. (1)
  • 10/4, 8/2, 8/3, 1/1 (1)
  • 12/4, 10/2, 10/3, 2/1 (1)
  • 126 cubic cm/7.7 cubic in vilume 3 #6 AWG Max Wire Size (1)
  • 14/2 to 10/3 (.40"-.63") Aluminum and Steel AC/MC/MCI-A/HCF (1)
  • 14/4, 12/3, 6/1, 4/1 (1)
  • 147 cubic cm/9.0 cubic in volume 3 #6 AWG Max Wire Size (1)
  • 2 holes 3/8" dia., 3 holes 7/16" dia. (1)
  • 2 holes 7/16" dia., 3 holes 1/2" dia. (1)
  • 2 holes 7/16" dia., 3 holes 5/8" dia. (1)
  • 227 cubic cm/13.8 cubic in volume 3#4 AWG Max Wire Size (1)
  • 3 holes 1-3/4" dia., 4 holes 1-1/8" dia. (3)
  • 4 holes 5/16" dia. (1)
  • 530-DC Also UL Listed for use with XRWFMC (1)
  • 581-DC UL also listed for use with XRWFMC (1)
  • Aluminum with cover and gasket (1)
  • Anti-Short;Redheads (1)
  • Available in 1/2" through 2" Trade Sizes. For larger trade sizes, use Bridgeport's 266-RT through 269-RT Raintight couplings. (1)
  • Ball Burnished, mirror smooth finish (4)
  • Bridgeport Fittings Products are safety listed to ensure code compliance. With our wide selection of fittings, Bridgeport has a connector, coupling or transition fitting to meet your needs. (2)
  • Bridgeport's Raintight Threadless Rigid couplings save time when installing Threadless Rigid conduit in a Wet Location. (1)
  • Clamp Type Connector (4)
  • Concrete-tight/Raintight (2)
  • Does not require trimming and is completely hidden by faceplate (2)
  • Duplex (1)
  • External spring steel locking tabs secures connector to electrical box. (1)
  • For Service Entrance (2)
  • Furnished with 2-way Phillips/Slotted Head Screw (27)
  • Furnished with Tri-Drive screw (8)
  • Galvanized for superior corrosion resistance. (1)
  • Grounding Lug Wire Capacity #6 - 250MCM (2)
  • HCF (4)
  • Hcf/Hcfmci-A (3)
  • Install by Snapping Cable into Place, then Snapping Connector into the Box;No Tools Required (1)
  • Install from outside or inside outlet box or enclosure. (2)
  • Insulated Throat 105°C (2)
  • Insulator Rated 105 degree C (2)
  • Integral internal spring steel locking tabs fasten cable or conduit. Suitable for maintaining grounding continuity when installed in accordance with NEC. (3)
  • K.O. Diameter - 2.969 In (1)
  • K.O. Size 1" (1)
  • K.O. Size 1/2" (2)
  • K.O. Size 1-1/2" (1)
  • K.O. Size 1-1/4" (1)
  • K.O. Size 2" (1)
  • K.O. Size 2-1/2" (1)
  • K.O. Size 3" (1)
  • K.O. Size 3/4" (1)
  • K.O. Size 3-1/2" (1)
  • K.O. Size 4" (1)
  • Liquid Tight and Water Tight Protection (6)
  • Listed for use with AC / AC90 / ACG90 / MC / MCI-A / HCFMCI-A / MC-PCS Cable*. cETLus Listed. (4)
  • Low Profile (1)
  • Low profile design and unique dimpled slots prevent accidental removal of cables. (1)
  • Made in US (1)
  • One Hole Strap (3)
  • Parallel (2)
  • Polyethylene with Steel Retainer (8)
  • Provides positive visual identification and can withstand the harshest environmental conditions. (2)
  • Quick Install (1)
  • Quick Install E-Z Lock (2)
  • Raintight (6)
  • Raintight/Concrete-Tight (2)
  • Retangular Opening (1)
  • Right Angle (1)
  • Roof Flashing RF-200 (1)
  • Single Screw Connector (1)
  • Sunlight Resistant;Connectors Simply Screw Onto Cable;No Tools Required (1)
  • Tapered (NPT) Threads (2)
  • The Dual Internal sealing rings create a raintight seal. (2)
  • They’re perfect for prefabrication of bundles of nonmetallic cable. These fittings provide a huge labor savings, compared to the traditional junction box or fitting assembly installation. (1)
  • Two Screw Connector (2)
  • Use #8 x 1/2" self-tapping sheet metal screw for steel stud (1)
  • Used to Secure Rigid/IMC or EMT Conduit Parallel to Beam, Channel or Angle Supports (1)
  • Watertight Fittings designed for indoor and outdoor applications (16)
  • With Bridgeport’s newly redesigned Raintight Compression Couplings, 266-RT through 269-RT, contractors can install just one wet location fitting for either thread less Rigid / IMC or EMT. (2)
  • With Cover (3)
  • With Tri-Drive Screw (1)
  • Show More...

• Application

  

  • 100 Amp or Less Service, For Rigid/IMC Conduit, Clamp Type Entrance Cap Cat. #1256, Roof Flashing RF-200, Porcelain Wire Holder MWH-1, 2" Pipe Strap 1906 (Two) (1)
  • 45 Degree fitting for connecting flexible metal conduit or armored cable to box or enclosure. Zinc Die Cast (1)
  • 45 Degree fittings for connecting steel or aluminum flexible metal conduit to box or enclosure. Zinc Die Cast (1)
  • 90 Degree connector for use with metallic and nonmetallic "Type B" liquid tight conduit. (1)
  • 90 Degree connector for use with metallic and nonmetallic "Type B" liquid tight conduit. 1" and up cast zinc. (4)
  • 90 Degree connector for use with metallic and nonmetallic "Type B" liquid tight conduit. 1" and up cast zinc. Insulator rated 105 degree C. (1)
  • 90 Degree connector for use with metallic and nonmetallic "Type B" liquid tight conduit. 3/8" thru 3/4" zinc die cast. Insulator rated 105 degree C. (2)
  • 90 Degree Connector used to connect Flexible Metal Conduit to box enclosure. (2)
  • 90 Degrees connector suitable for use to connect flexible metal conduit to box or enclosure. Insulator rated 105 degrees C. (2)
  • 90 Degrees connector suitable for use to connect flexible metal conduit to box or enclosure. Insulator rated 105 degrees C. Diameter for 1.500" 0 min to 1.625" 0 max. (1)
  • 90 Degrees connector suitable for use to connect flexible metal conduit to box or enclosure. Insulator rated 105 degrees C. 12/2 (.560" 0 min) to 10/3 (.610" 0 max) (1)
  • 90 Degrees connector suitable for use to connect MC/FMC to box or enclosure. Insulator rated 105 degrees C. 1.187" 0 min to 1.312" 0 max (1)
  • 90 Degrees connector suitable for use to connect MC/FMC to box or enclosure. Insulator rated 105 degrees C. Diameter (.75" 0 min) (.875" 0 max) (1)
  • 90 Degrees connector suitable for used to connect flexible metal conduit to box or enclosure. (1)
  • 90 Degrees connector suitable to connect MC/FMC to box or enclosure. Insulator rated 105 degrees C. Diameter (.875" 0 min) to (1.00" 0 max) (1)
  • 90 Degrees fitting with cover for connecting flexible metal conduit to box or enclosure. (2)
  • 90 Degrees fitting with cover used for connecting flexible metal conduit to box or enclosure. (6)
  • 90°Connector Recommended Cable Types Used to Connect Flexible Metal Conduit to Box or Enclosure. Diameter For (.75" 0 Min) to (.875" 0 Max) (1)
  • 90°Connector Suitable For Used to Connect Flexible Metal Conduit to Box or Enclosure (3)
  • 90°Connector Suitable For Used to Connect Mc/Fmc to Box or Enclosure. Diameter: 1.50" 0 Min to 1.625" 0 Max (1)
  • 90°Connector Suitable to Connect Mc/Fmc to Box or Enclosure. Diameter (.875" 0 Min) to (1.00" 0 Max) (1)
  • 90°Connector Suitable to Connect Mc/Fmc to Box or Enclosure. Recommended Cable Types: 1.187" 0 Min to 1.312" 0 Max (1)
  • 90°Fitting with Cover For Connecting Flexible Metal Conduit to Box or Enclosure (1)
  • 90°Fitting with Cover Recommended Cable Types Used For Connecting Flexible Metal Conduit to Box or Enclosure. 14/4 (.45" 0 Min) to 10/4 (.625" 0 Max). Mc/Mci-A (1)
  • 90°Fitting With Cover Used For Connecting Flexible Metal Conduit to Box or Enclosure (2)
  • 90degree Connector for use with 3/8" Flexible Metal Conduit. Non-Insulated. Recommended cable types: Diameter for 12/2 (.550" 0 min) to 10/3 (.610" 0 max) (1)
  • Allows access to the interior of a conduit system for inspection, pulling and maintenance. (11)
  • Bridgeport Fittings EZ-Lock 3/4 inch steel connector recommended for cables with an O.D. of .56 - .81 or 10/3 to 6/3 Listed for use with steel and aluminum Flexible Metallic Conduit (FMC) in 1/2 inch trade size. Listed for use with Metal Clad (MC) and A (1)
  • Bridgeport’s ASP line of E-Z LOCK® Duplex Snap-in Connectors offers superior installation speed with no tools required. To install, push the cables into the rear of the fitting, insert the fitting into the KO at an angle, and rock up to snap the front end in place. (1)
  • Bridgeport’s ASP line of E-Z LOCK® Duplex Snap-in Connectors offers superior installation speed with no tools required. To install, push the cables into the rear of the fitting, insert the fitting into the KO at an angle, and rock up to snap the front end in place. (3)
  • Bridgeport's LB Conduit Bodies with Integral Raintight Connectors allows access to the interior of a conduit system for inspection, pulling and maintenance, without needing to thread connectors into a conduit body entry. These conduit bodies come with stainless steel screws, an aluminum cover, and a neoprene gasket. (2)
  • Bridgeport's LLR Conduit Bodies are Type LL/LR Combination conduit bodies with Integral Raintight Connectors. These allows access to the interior of a conduit system for inspection, pulling and maintenance, without needing to thread connectors into a conduit body entry. These conduit bodies come with stainless steel screws, an aluminum cover, and a neoprene gasket. (1)
  • Clamp type entrance cap for rigid conduit and IMC. 1 hole 1" dia.; 3 holes 7/8" dia.; 3 holes 1 5/16" dia. (1)
  • Clamp type entrance cap for rigid conduit and IMC. 1 hole 7/16" dia.; 2 holes 5/8" dia.; 3 holes 3/4" dia. (1)
  • Clamp type entrance cap for rigid conduit and IMC. 2 hole 9/16" dia.; 2 holes 3/4" dia.; 3 holes 1" dia. (1)
  • Clamp type entrance cap for rigid conduit and IMC. 2 holes 3/8" dia.; 3 holes 7/16" dia. (1)
  • Clamp type entrance cap for rigid conduit and IMC. 2 holes 7/16" dia.; 3 holes 1/2" dia. (1)
  • Clamp type entrance cap for rigid conduit and IMC. 2 holes 7/16" dia.; 3 holes 5/8" dia. (1)
  • Clamp type entrance cap for rigid conduit and IMC. 3 holes 1 3/4" dia.; 4 holes 1 1/8" dia. (3)
  • Clamp type entrance cap for rigid conduit and IMC. 4 holes 5/16" dia. (1)
  • Clamp-on adjustable wire holder for 1 1/4 " through 3" service entrance mast, approx 1" by 15/16" wire opening. (1)
  • Compression style connector with internal sealing ring and knockout gasket to create a raintight seal when connecting EMT to box or enclosure. With Bridgeport’s newly redesigned Raintight Compression Connectors, 256-RTI2 thru 259-RTI2, contractors can install just one wet location fitting for either thread less Rigid / IMC or EMT. These 2-1/2” dual Listed Zinc Alloy fittings come standard with a 105° C temperature rated insulated throat and the words “Rigid / EMT and RAINTIGHT” clearly cast into the body. (1)
  • Compression style connector with internal sealing ring and knockout gasket to create a raintight seal when connecting EMT to box or enclosure. With Bridgeport’s newly redesigned Raintight Compression Connectors, 256-RTI2 thru 259-RTI2, contractors can install just one wet location fitting for either thread less Rigid / IMC or EMT. These 3” dual Listed Zinc Alloy fittings come standard with a 105° C temperature rated insulated throat and the words “Rigid / EMT and RAINTIGHT” clearly cast into the body. Thi (1)
  • Connector provides watertight seal around underground feeder cable. Tapered (NPT) threads. (2)
  • Converts Metallic Box Rough Edged Knockout Holes to Smooth Insulated Holes for Protection of Electrical and Telecommunications Cable (1)
  • E-Z LOCK® AC/MC/MCI-A and FMC Duplex connector, allows for the connection of two AC/MC cables into one 1/2" knockout. It is also suitable for use with steel and aluminum 3/8" trade size Flexible Metallic Conduit (FMC). Recommended cable types: 14/2 - 10/3 diameter: .42 - .61 (1)
  • For connecting flexible metal conduit to box or enclosure. Screw connector into conduit and snap into electrical box. Patented E-Z LOCK design. (1)
  • For connecting nonmetallic cable to box or enclosure. (5)
  • For connecting nonmetallic cable to box or enclosure. It can be used with one or two cables. (1)
  • For connecting nonmetallic cable to box or enclosure. It can be used for one or two cables. (1)
  • For connecting portable cord to box or enclosure. Locknut not required. (1)
  • For Use in Old Work Applications, cable can be pulled into a box, then this connector is installed onto the cable, and locked into place from inside the box. No tools required. cULus Listed for use with 14/2 to 10/3 (.40"-.63") aluminum and Steel AC/MC/MCI-A/HCF. (1)
  • For use on wood or steel stud to position and support datacom, video, and/or voice cabling; also suitable for use with nonmetallic sheath cables. May be used on metallic or nonmetallic cabinets and enclosures. Provides neat and positive securement of cables in any position. (1)
  • For use with most Metallic or Nonmetallic Electrical Boxes. Non-Conductive Extender/Insulator corrects setbacks up to 1" and insulates devices such as GFCI from Metallic Box. (2)
  • Indoor and Outdoor;All Fittings Can Be Used in Chemical and Treatment Plants As Well As for Offshore;Typical Applications Include Wiring of Motors;Transformers;Advanced Machinery;Refrigeration and Tools (6)
  • Industrial (12)
  • Inside/outside box mountable. Connector suitable for use with (1) 8/2, 8/3, 6/2 or 6/3 NM-B cable (1)
  • Inside/outside box mountable. Connector suitable for use with (1) 14/2 to 6/2 NM-B cable or (2) 14/2 to 12/3 NM-B cables in any combination. (1)
  • Install by snapping cable into place, then snapping connector into the box. No tools required. cULus Listed for use with 14/2 to 10/3 (.40"-.63") Aluminum and Steel AC/MC/MCI-A/HCF and 3/8" Aluminum and Steel FMC/RWFMC. (1)
  • Mighty-Align® "Slip" Style Coupling - Used to join two lengths of EMT together.Backing out center screw allows the slip coupling to be temporarily located on one cut end while adjacent end is slid into place.Back out center screw stop as necessary to slip coupling over conduit.Fully install center screw stop between conduits.Ensure that both ends of conduit are visible in sight hole.Mighty-Align® "Slip" Style Coupling - Used to join two lengths of EMT together.Backing out center screw allows the slip coupl (1)
  • Mighty-Align® "Slip" Style Coupling - Used to join two lengths of EMT together.Backing out center screw allows the slip coupling to be temporarily located on one cut end while adjacent end is slid into place.Back out center screw stop as necessary to slip coupling over conduit.Fully install center screw stop between conduits.Ensure that both ends of conduit are visible in sight hole.Tighten all set screws. Patented (1)
  • Mogul style conduit body for use with threaded rigid/IMC conduit allows extra access to inside of raceway for pulling wire. Split diagonal cover and body ensures ease in wire bending. Raintight. (1)
  • Nonmetallic screw-on 90 degree connectors for use with nonmetallic "Type B" liquid tight conduit. PVC construction with zinc locknut. Connectors simply screw onto cable. No tools required! (1)
  • Nonmetallic screw-on 90 degree connectors for use with nonmetallic "Type B" liquid tight conduit. PVC construction with zinc locknut. Connectors simply screw onto cable. No tools required! Insert UL bug. File No.E9391 (1)
  • Polyethylene "Redheads" prevent damage to wire installation when placed between the wire and armored sheath. Rated 90 degree C. (3)
  • Polyethylene Redheads Prevent Damage to Wire Installation when Placed Between the Wire and Armored Sheath. Rated 90 Degree C (1)
  • Protects cable running through wood stud, from nails and screws. Great for protecting conductors, cables and raceways. (1)
  • Recommended cable types for connecting 10/4 to 8/3 PVC MC cable to box or enclosure diameter .61 - .69. RainTight/ConcreteTight (1)
  • Recommended cable types for connecting 14/4 (.43" 0 min) to 10/3 (.61" 0 max) AC/MC Cable or 3/8" Flexible Metal Conduit to box or enclosure. HCF/HCFMCI-A (1)
  • Recommended cable types for use with Steel or Aluminum 14/2 (.38" 0 min) to 10/3 AWG (.61" 0 max) Health Care Facility (HCF) Armored Cable. AC/MC/MCI-A (1)
  • Recommended cable types for use with steel or aluminum interlocked Metal Clad cable 1.1" to 1.25" (4/4 to 3/4) (1)
  • Recommended cable types for use with steel or aluminum interlocked Metal Clad cable 1.25" to 1.5" (2/4 to 3-2/0) (1)
  • Recommended cable types for use with steel or aluminum interlocked Metal Clad cable 1.25" to 1.50" (2/4 to 3-2/0) (1)
  • Recommended cable types for use with steel or aluminum interlocked Metal Clad cable 1.750" to 2.000" (4-4/0 to 4-250MCM) (1)
  • Recommended cable types for use with steel or aluminum interlocked Metal Clad cable. 4-300 MCM to 4-500 MCM, diameter 2 - 2.5 (1)
  • Recommended Cable Types to Connect Armored or Metal Clad Cable to Box or Enclosure. (.44 to .61) 12/2 - 10/4 AC/MC/MCIA/FMC/HCF/HCFMCI-A (1)
  • Recommended Cable Types to Connect Corrugated or Interlocked Mc or Ac Cable to Box or Enclosure. 14/4(.44" 0 Min) to 10/4 (.61" 0 Max) Mci-A. 12/2 to 10/4 Ac/Mc/Mcia/Hcf/Hcfmci-A 3/8" Fmc. 14/2 - 10/3 Nm Cable (1)
  • Recommended Cable Types to Connect Mc & Ac Cable or 3/8 Inch Flexible Metal Conduit to Box or Enclosure. 14/2 (.38" 0 Min) to 10/3 (.61" 0 Max) Mci-A/Hcf/Hcfmcia (1)
  • Recommended cable types to connect steel armored cable to box or enclosure. 14/2-10/3 Steel Armored and .43 -.61 Steel Interlocked MC (1)
  • Recommended cable types to connect steel flexible metal conduit or armored cable to box or enclosure. Insulator rated 105 degree C. Armored Cable .86" - .92 DIA. (1)
  • Recommended Cable Types to Connect Steel Flexible Metal Conduit or Armored Cable to Box or Enclosure. Armored Cable .86"-.92" Dia (1)
  • Recommended Cable Types to Connect Steel or Aluminum Flexible Metal Conduit or Armored Cable to Box or Enclosure. (.56-.61 Dia.) For 12/3 to 10/3 Steel or Aluminum Mc Cable (1)
  • Recommended cable types with 12/2 to 10/3 PVC Jacket MC Cable or TECK Cable .50 - .61. RainTight and ConcreteTight (1)
  • Red fire alarm box to meet visual identification requirements for fire alarm installations. (2)
  • Service Entrance (1)
  • Simply snap cables into connector and snap assembly into electrical box. (3)
  • Snap-On Type Strap Used to Support Round Steel or Aluminum Metal Clad Cable (1)
  • Straight connector for use with metallic and non-metallic "Type B" liquid tight conduit. (3)
  • Straight connector for use with metallic and non-metallic "Type B" liquid tight conduit. Insulator rated 105 degree C. (3)
  • Straight connector for use with non-metallic "Type B" liquid tight conduit. (4)
  • Straight Set Screw Type Fitting Used to Connect Flexible Metal (steel) Conduit to Box or Enclosure (2)
  • The 3000-RT Series are compression type connectors used to join unthreaded steel rigid conduit to box or enclosure in a wet location. (2)
  • The 3100-RT Series are compression type couplings used to join unthreaded steel rigid conduit to box or enclosure in a wet location. (1)
  • The 3100-RT Series are compression type couplings used to join unthreaded steel rigid conduit to box or enclosure in a wet location. Available in 1/2" through 2" Trade Sizes. For larger trade sizes, use Bridgeport's 266-RT through 269-RT Raintight couplings. (1)
  • The 630-NM2 allows for multiple nonmetallic cables to be installed into a single 3/4" KO. Simply squeeze the tabsto install or remove the cables. Each port can hold One 10/3 through 14/2 cable; or One Oval 10/2, 12/2 or 14/2; or Two Oval 14/3 or 12/3; or Two Oval 10/2 thru 14/2 NM Cables. Patented. (1)
  • The NMCB-3 is provided with nails for use on wood studs or 3/4" thick furring strips to position non-metallic sheath cable. Capable of positioning up to five 14/2 to 10/3 AC or MC cables or two 14/2 NM cables in each of three rectangular slots. May also be used to be attached to metal studs or enclosures, or concrete block with #6 round head screws. Mounts in either horizontal or vertical direction. Low voltage design and unique dimpled slots prevent accidental removal of cables. (1)
  • These 2-1/2” dual Listed Zinc Alloy fittings come standard with a 105° C temperature rated insulated throat and the words “Rigid / EMT and RAINTIGHT” clearly cast into the body. This marking helps the AHJ to precisely confirm the products intended use. Patented (1)
  • These 3” dual Listed Zinc Alloy fittings come standard with a 105° C temperature rated insulated throat and the words “Rigid / EMT and RAINTIGHT” clearly cast into the body. This marking helps the AHJ to precisely confirm the products intended use. Patented (1)
  • These watertight fittings are designed for both indoor and outdoor applications. All fittings can be used in chemical and treatment plants as well as for offshore applications. Straight connector for use with portable cord provides liquid tight and water tight protection. Typical applications include wiring of motors, transformers, advanced machinery, refrigeration, and tools. (16)
  • Threaded bodies for rigid conduit or IMC allows access for inspection, pulling and maintenance. (18)
  • Type T Combination EMT/Rigid Conduit Body with Cover and Gasket (4)
  • Use with Liquid Tight or Raintight Connectors, or Threaded Conduit (when used with locknuts) (8)
  • Used in situations where wires have already been pulled through Rigid/IMC conduit, and an insulated bushing is required. Rated 150 Degree C. cULus listed. Patented. Now featuring UV Stabilized Insulators and Stainless Steel Hardware, perfect for solar and other outdoor installations! (2)
  • Used to connect 14/2-10/3 (.43" - .61") AC/MC/MCI-A/HCF cable and 3/8" FMC to box or enclosure. Just squeeze to insert into the 1/2" K.O. Use with an anti-short bushing. .375"Throat Opening. Great for lighting whips! Patent Pending (1)
  • Used to connect 2 14/2 - 10/2 (.43" - .59") AC/MC/MCI-A/HCF cables and 3/8" FMC to box or enclosure. No Tools Required Just squeeze to insert into the 1/2" K.O Use with an anti-short bushing. .375" Throat Opening. Great for lighting whips! (1)
  • Used to Connect Flexible Metal Conduit or Armored Cable to Box or Enclosure (4)
  • Used to connect flexible metal conduit or armored cable to box or enclosure. (2)
  • Used to connect flexible metal conduit or armored cable to box or enclosure. Insulator rated 105 degree C. (2)
  • Used to Connect Flexible Metal Conduit to Box or Enclosure (10)
  • Used to connect flexible metal conduit to box or enclosure. (14)
  • Used to connect flexible metal conduit to box or enclosure. Insulator rated 105 degree C. (1)
  • Used to connect single round service entrance cable to box or enclosure. (5)
  • Used to Connect Steel Flexible Metal Conduit or XRW FMC to Box or Enclosure (2)
  • Used to connect steel flexible metal conduit or XRW FMC to box or enclosure. Insulator rated 105 degree C. (2)
  • Used to Connect Steel Flexible Metal Conduit to Box or Enclosure (1)
  • Used to connect steel flexible metal conduit to box or enclosure. Insulator rated 105 degree C. (1)
  • Used to join either metallic or non-metallic (Type "B") liquid tight conduit to EMT. Raintight. Concrete-Tight. (2)
  • Used to Join Emt to Flexible Metal Conduit. Screw-In Type For Flex. Compression Type For EMT (3)
  • Used to join two lengths of flexible metal conduit. (3)
  • Used to secure Rigid/IMC or EMT conduit parallel to beam, channel or angle supports. (2)
  • Used to Secure Rigid/IMC or Emt Conduit Parallel to Beam;Channel or Angle Supports (1)
  • Used to secure Rigid/IMC or EMT conduit perpendicular to beam, channel and angle supports. (1)
  • Used to support oval types SE and SEU cable to mounting surface. (1)
  • Wet Location (14)
  • Show More...

• Package Quantity

  

  • 1 CA;100 PK (1)
  • 1 ct (8)
  • 1 CT;10 PK (2)
  • 1 CT;100 PK (1)
  • 1 CT;2 Pk (2)
  • 1 CT;25 PK (3)
  • 1 CT;5 PK (9)
  • 1 CT;50 Pk (3)
  • 1 PK (1)
  • 10 CT;100 PK (5)
  • 10 CT;50 PK (4)
  • 10 PK;1 CT (4)
  • 100 CT;1000 PK (5)
  • 100 PK (1)
  • 100 PK;10 CT (1)
  • 100 PK;1000 PK (2)
  • 1000 PK;100 CT (1)
  • 2 PK (1)
  • 20 CT;100 PK (1)
  • 20 PK (1)
  • 20 PK;1 CT (2)
  • 20 PK;100 PK (1)
  • 200 STD PK;20 CT (1)
  • 25 CT (3)
  • 25 CT;100 PK (4)
  • 25 CT;250 PK (8)
  • 25 PK;1 CT (3)
  • 25 PK;100 PK (1)
  • 250 PK;25 CT (1)
  • 5 CT;200 PK (1)
  • 5 CT;25 PK (2)
  • 5 PK (1)
  • 5 PK;1 CT (7)
  • 5 PK;25 PK (1)
  • 50 CT;200 PK (7)
  • 50 CT;500 PK (4)
  • 50 PK (1)
  • 500 PK;100 CT (1)
  • 500 STD PK;50 CT (3)
  • 7000 PK;50 CT (1)
  • Show More...

• Weight

  

  • 0.0001 lb/EA (1)
  • 0.0007 lb/EA (1)
  • 0.0187 lb (1)
  • 0.0189 lb/EA (1)
  • 0.019 lb/EA (1)
  • 0.02 lb/EA (1)
  • 0.05 lb/EA (1)
  • 0.051 lb/EA (1)
  • 0.0513 lb/EA (1)
  • 0.0523 lb/EA (1)
  • 0.062 lb/EA (2)
  • 0.068 lb/EA (1)
  • 0.0696 lb/EA (1)
  • 0.07 lb/EA (2)
  • 0.08 lb/EA (2)
  • 0.0839 lb/EA (1)
  • 0.085 lb/EA (1)
  • 0.0984 lb/EA (1)
  • 0.1016 lb/EA (1)
  • 0.112 lb/EA (1)
  • 0.117 lb/EA (1)
  • 0.1289 lb/EA (1)
  • 0.1328 lb/EA (1)
  • 0.133 lb/EA (1)
  • 0.137 lb/EA (1)
  • 0.14 lb/EA (2)
  • 0.144 lb/EA (1)
  • 0.15 lb/EA (1)
  • 0.174 lb/EA (1)
  • 0.193 lb/EA (1)
  • 0.2 lb/EA (1)
  • 0.208 lb/EA (1)
  • 0.21 lb/EA (1)
  • 0.22 lb/EA (1)
  • 0.26 lb/EA (1)
  • 0.27 lb/EA (1)
  • 0.2779 lb/EA (1)
  • 0.286 lb/EA (1)
  • 0.31 lb/EA (1)
  • 0.32 lb/EA (1)
  • 0.34 lb/EA (2)
  • 0.36 lb/EA (2)
  • 0.38 lb/EA (1)
  • 0.4 lb/EA (2)
  • 0.404 lb/EA (1)
  • 0.428 lb/EA (1)
  • 0.48 lb/EA (1)
  • 0.5 lb/EA (2)
  • 0.52 lb/EA (1)
  • 0.62 lb/EA (1)
  • 0.628 lb/EA (1)
  • 0.635 lb/EA (1)
  • 0.664 lb/EA (1)
  • 0.768 lb/EA (1)
  • 0.8 lb/EA (1)
  • 0.87 lb/EA (1)
  • 1 lb/EA (5)
  • 1.01 lb/EA (1)
  • 1.1239 lb/EA (1)
  • 1.2 lb/EA (2)
  • 1.36 lb/EA (1)
  • 1.4799 lb/EA (1)
  • 1.499 lb/EA (1)
  • 1.6 lb/EA (1)
  • 1.9599 lb/EA (1)
  • 2.5 lb/EA (1)
  • 21 lb/EA (1)
  • 3 lb/EA (1)
  • 3.34 lb/EA (1)
  • 3.54 lb/EA (1)
  • 4 lb/EA (1)
  • 4.5 lb/EA (1)
  • 45 lb/EA (1)
  • 5 lb/EA (1)
  • 6 lb/EA (2)
  • 7 lb/EA (1)
  • Show More...

• Made In Usa

  

  • no (1)
  • yes (81)
  • Show More...

• Category Description

  

  • ANCHORS & ANCHOR KITS (1)
  • BEAM, RA, EDGE, & PARALLEL CLAMPS (4)
  • CONDUIT HANGERS/STAND OFF STRAPS (1)
  • CORD CONNECTORS & CORD GRIPS (38)
  • COUPLINGS, ADAPTERS, REDUCERS, BUSHINGS, & CAPS (4)
  • DIECAST EMT FITTINGS (10)
  • FLEX & MC FITTINGS (92)
  • FLEX & MC STRAPS (4)
  • FORM 5 CONDULETS, COVERS, & GASKETS (35)
  • FORM 7, 8, CONDULETS, COVERS, & GASKETS (13)
  • Form 9 condulets, covers & gaskets (1)
  • Fuses & Fuse Accessories (1)
  • Locknuts, Bushings, Re-Bushings, Re-Washers, Threaded Plugs, Knockout Plugs (3)
  • METALLIC FITTINGS (28)
  • NON-METALLIC FITTINGS (10)
  • ROMEX CONNECTORS (11)
  • SERVICE ENTRANCE FITTINGS: Weatherheads & Grounding Fittings & Ground Rods (13)
  • SLB'S & JAKE ELL'S (6)
  • STEEL BOXES & COVERS (5)
  • Watertight Hub, 3-PIECE COUPLINGS, THREADLESS COUPLINGS AND THREADLESS CONNECTOR (4)
  • Show More...

• Temperature Rating

  

  • 105?°C (29)
  • 150?°C (2)
  • 90?°C (4)
  • Show More...

• Type

  

  • BUSHING (5)
  • Cable Stacker (1)
  • Cable Support (1)
  • COMBINATION (4)
  • Conduit Clamps (4)
  • CONNECTOR (145)
  • Connectors (4)
  • Cord Grips (12)
  • COUPLING (8)
  • Double Screw (1)
  • Duplex E-Z LOCK® Snap-In MC Connector (2)
  • Duplex Snap-In (1)
  • Entrance Caps (10)
  • E-Z LOCK (3)
  • Insulated Duplex E-Z LOCK® Snap-In MC Connector (2)
  • LB (2)
  • Liquidtight Sealing Ring (8)
  • LL/LR (1)
  • Mast Kit (1)
  • Mogul Conduit Bodies (1)
  • NAIL PLATE (1)
  • One Hole Service Entrance Strap (1)
  • One Hole Strap (1)
  • One Hole Straps (2)
  • Raintight (2)
  • Raintight Compression (2)
  • Red Fire Alarm (2)
  • ROUND (1)
  • Service Entrance LB (6)
  • Set Screw Slip (2)
  • Single Barrel, Cut In Double-Snap (1)
  • Single Barrel, Double-Snap (1)
  • SINGLE GANG (1)
  • Single Screw Strap Type (1)
  • Snap-In "U" Shaped, Strapped (1)
  • SPLIT (2)
  • Steel Cord Grips (10)
  • Type C (5)
  • Type LB (1)
  • Type LB Set Screw (6)
  • Type LL (5)
  • Type LR (5)
  • TYPE T (1)
  • UF Connectors (2)
  • Universal Straps (1)
  • Wire Holder (2)
  • Show More...

• Connector Type

  

  • Color-Coded (1)
  • Combination (5)
  • Compression (4)
  • Duplex (1)
  • E-Z Lock® (1)
  • FMC (31)
  • Jacketed MC/TECK (2)
  • Liquidtight (11)
  • LiquidTight, Insulated (3)
  • Nonmetallic (1)
  • Nonmetallic, Screw-on (1)
  • Screw-In (8)
  • Screw-In, Insulated (6)
  • SET SCREW (3)
  • Single Screw Strap-Type, Insulated (1)
  • Single Screw, Strap Type (2)
  • Squeeze (22)
  • Squeeze, Insulated (9)
  • STRAIGHT (11)
  • Straight Nonmetallic (4)
  • Straight, Insulated (3)
  • Two Screw Strap Type (1)
  • Two Screw, Strap Type (5)
  • Two-Screw, Strap Type (12)
  • U Shaped (1)
  • U Shaped, Insulated (1)
  • Show More...

• Hub Size

  

  • 0.5 (2)
  • 0.75 (8)
  • 1 (7)
  • 1.25 (5)
  • 1.25 in (1)
  • 1.5 (7)
  • 2 (7)
  • Show More...

• Cable Entry

  

  • Lock-In tabs for NM cable (1)
  • Phenolic entrance to Aluminum clamp type for Rigid/IMC (10)
  • Push-In tabs for NM cable (2)
  • Single rectangular entry point (2)
  • Two piece steel clamp with tabs to insert through knockout (4)
  • Show More...