Filter Your Results

• Keyword
• steel conduit

---

• Product Type

  

  • 1 1/2 X 6 Cond Nip Gal (1)
  • 1 1/2" Pipe/Conduit Clamp, Rigid, 1 1/2", Pre-Asm, HD Gal (2)
  • 1 CND Exp JNT Int GRD Max CND MVT 4 (1)
  • 1 CNDT Body CVR & GSKT Stainless Steel (4)
  • 1 Cond 45 Elbow Gal (1)
  • 1 Cond 90 Elbow Gal (1)
  • 1 Cond CPLGS Galv (1)
  • 1 X 10 Cond Nip Gal (1)
  • 1 X 12 Cond Nip Gal (1)
  • 1 X 2 Cond Nip Gal (1)
  • 1 X 2-1/2 Cond Nip Gal (1)
  • 1 X 3 Cond Nip Gal (1)
  • 1 X 3-1/2 Cond Nip Gal (1)
  • 1 X 4 Cond Nip Gal (1)
  • 1 X 5 Cond Nip Gal (1)
  • 1 X 6 Cond Nip Gal (1)
  • 1 X 8 Cond Nip Gal (1)
  • 1 X CL Cond Nip Gal (1)
  • 1" Cond Locknut STL Ul (1)
  • 1" Pipe/Conduit Clamp, Rigid, 1", Pre-Asm, HD GLVD (2)
  • 1" RW Steel Flex 300' RL (1)
  • 1/2 Cond 90 Elbow Gal (1)
  • 1/2 Cond CPLGS Galv (1)
  • 1/2 Form 85 Unilet (1)
  • 1/2 In 90D Short Elb Conn (1)
  • 1/2 X 1 1/2IN Galvanized Steel Conduit Nipple (1)
  • 1/2 X 10 Cond Nip Gal (1)
  • 1/2 X 12 Cond Nip Gal (1)
  • 1/2 X 2 1/2IN Galvanized Steel Conduit Nipple (1)
  • 1/2 X 2 Cond Nip Gal (1)
  • 1/2 X 3 Cond Nip Gal (1)
  • 1/2 X 3-1/2 Cond Nip Gal (1)
  • 1/2 X 4 Cond Nip Gal (1)
  • 1/2 X 5 Cond Nip Gal (1)
  • 1/2 X 6 Cond Nip Gal (1)
  • 1/2 X 8 Cond Nip Gal (1)
  • 1/2 X CL Cond Nip Gal (1)
  • 1/2" Cond Locknut STL Ul (1)
  • 1/2EMT Clip W/1/8-1/4BMCLMP SP (1)
  • 1-1 8" Carbide Hole Cutter (1)
  • 1-1/2 Cond 45 Elbow Gal (1)
  • 1-1/2 Cond 90 Elbow Gal (1)
  • 1-1/2 Cond CPLGS Galv (1)
  • 1-1/2 X 10 Cond Nip Gal (1)
  • 1-1/2 X 12 Cond Nip Gal (1)
  • 1-1/2 X 2 Cond Nip Gal (1)
  • 1-1/2 X 2-1/2 Cond Nip Gal (1)
  • 1-1/2 X 3 Cond Nip Gal (1)
  • 1-1/2 X 3-1/2 Cond Nip Gal (1)
  • 1-1/2 X 4 Cond Nip Gal (1)
  • 1-1/2 X 5 Cond Nip Gal (1)
  • 1-1/2 X 8 Cond Nip Gal (1)
  • 1-1/2 X CL Cond Nip Gal (1)
  • 1-1/2" Cond Locknut STL Ul (1)
  • 1-1/2" Rigid Strut Straps 316 (1)
  • 1-1/2" Ul LT LFMC Gray 150' RL (1)
  • 1-1/4 Cond 45 Elbow Gal (1)
  • 1-1/4 Cond 90 Elbow Gal (1)
  • 1-1/4 Cond CPLGS Galv (1)
  • 1-1/4 X 10 Cond Nip Gal (1)
  • 1-1/4 X 12 Cond Nip Gal (1)
  • 1-1/4 X 2 Cond Nip Gal (1)
  • 1-1/4 X 2-1/2 Cond Nip Gal (1)
  • 1-1/4 X 3 Cond Nip Gal (1)
  • 1-1/4 X 4 Cond Nip Gal (1)
  • 1-1/4 X 5 Cond Nip Gal (1)
  • 1-1/4 X 6 Cond Nip Gal (1)
  • 1-1/4 X 6 SS316 Nip (1)
  • 1-1/4 X 8 Cond Nip Gal (1)
  • 1-1/4 X CL Cond Nip Gal (1)
  • 1-1/4" Cond Locknut STL Ul (1)
  • 120" Conduit Trapeze Support, 4" Emt / RGD (1)
  • 12-2 Statst 250C (2)
  • 2 CND Exp JNT Int GRD Max CND MVT 4 HDG (1)
  • 2 Cond 90 Elbow Gal (1)
  • 2 Cond CPLGS Galv (1)
  • 2 X 10 Cond Nip Gal (1)
  • 2 X 2-1/2 Cond Nip Gal (1)
  • 2 X 3 Cond Nip Gal (1)
  • 2 X 4 Cond Nip Gal (1)
  • 2 X 5 Cond Nip Gal (1)
  • 2 X 6 Cond Nip Gal (1)
  • 2 X 8 Cond Nip Gal (1)
  • 2 X CL Cond Nip Gal (1)
  • 2 X CL SS304 Nip (1)
  • 2" Cond Locknut STL Ul (1)
  • 2" LT Ul LT LFMC Gray 100' RL (1)
  • 2" Pipe/Conduit Clamp, Rigid, 2", Pre-Asm, HD GLVD (2)
  • 2" Rigid Strut Straps 316 (1)
  • 2-1/2 Cond 45 Elbow Gal (1)
  • 2-1/2 Cond 90 Elbow Gal (1)
  • 2-1/2 Cond CPLGS Galv (1)
  • 2-1/2 X 3 Cond Nip Gal (1)
  • 2-1/2 X CL Cond Nip Gal (1)
  • 2-1/2"X12" Conduit Nipple 1/10-PK (1)
  • 2-Gang Flush SVC FLR-BX 74CU Plastc (1)
  • 3 Cond 45 Elbow Gal (1)
  • 3 Cond 90 Elbow Gal (1)
  • 3 Cond CPLGS Galv (1)
  • 3" Cond STL Locknuts (1)
  • 3/4 CNDT Body CVR & GSKT Stainless Steel (4)
  • 3/4 Emt Fast Support Clip SP (1)
  • 3/4 Inch Erickson Coupling (2)
  • 3/4 X 10 Cond Nip Gal (1)
  • 3/4 X 12 Cond Nip Gal (1)
  • 3/4 X 2 Cond Nip Gal (1)
  • 3/4 X 2-1/2 Cond Nip Gal (1)
  • 3/4 X 3 Cond Nip Gal (1)
  • 3/4 X 3-1/2 Cond Nip Gal (1)
  • 3/4 X 4 Cond Nip Gal (1)
  • 3/4 X 5 Cond Nip Gal (1)
  • 3/4 X 6IN Galvanized Steel Conduit Nipple (1)
  • 3/4 X 8 Cond Nip Gal (1)
  • 3/4 X CL Cond Nip Gal (1)
  • 3/4" Cond Locknut STL Ul (1)
  • 3/4" Pipe/Conduit Clamp, Rigid, 3/4", Pre-Asm, SSL (2)
  • 3/4" Rigid Strut Straps 316 (1)
  • 3/8 LT 90 Degree Conn (1)
  • 3-1/2 Cond 45 Elbow Gal (1)
  • 3-1/2 Cond 90 Elbow Gal (1)
  • 3-1/2 Cond CPLGS Galv (1)
  • 3-1/2" Cond STL Locknuts Non (1)
  • 3-1/2" NM Bushing (1)
  • 4 Cond 90 Elbow Gal (1)
  • 4 Cond CPLGS Galv (1)
  • 4 FM7 Aluminum Body (2)
  • 4 SQ Box 2 1/8 Deep Welded Painted Red (1)
  • Adjustable Bar Hanger (2)
  • Aluminum Armored Conductor (4)
  • Armorlite Type MC (21)
  • Armorlite Type MC PVC Jacketed (2)
  • Assembled Conduit Bender (2)
  • Bender Handle, Ideal, 1.000 In Emt, 3/4 In RGD and 3/4 In Imc C (1)
  • Blue Steel Armor Type MC (7)
  • C Cond Body 1" 316 (1)
  • C Cond Body 1-1/2" 316 (1)
  • C Cond Body 3/4" 316 (1)
  • Cable/Conduit to Stud Attachment (2)
  • Channel Conduit Clamp (17)
  • Clamp, Strut, One Piece 1/2emt (2)
  • Clamp, Strut, One Piece 3/4EMT 1 (2)
  • Clip, Conduit, 1/2 to 3/4 9/32 P (1)
  • Compression Connector (2)
  • Cond 1" 304 (1)
  • Cond 1-1/2" 304 (1)
  • Cond 2" 304 (1)
  • Cond 3/4" 304 (1)
  • Cond Hanger 1" 316 (1)
  • Cond Hanger 1-1/2" 316 (1)
  • Cond Hanger 2" 316 (1)
  • Cond Hanger 3/4" 316 (1)
  • Cond HGR SZ 2in (1)
  • Cond Hub 1" 316 (1)
  • Cond Hub 1-1/2" 316 (1)
  • Cond Hub 2" 316 (1)
  • Cond Hub 3/4" 316 (1)
  • Cond/Pipe HGR 1.5IN Rigid W/O BLT (1)
  • Cond/Pipe HGR 1IN STN-STL W/ BLT (1)
  • Cond/Pipe HGR Emt SZ1-1/2IN W/O BLT (1)
  • Conduit Bender (1)
  • Conduit Body (73)
  • Conduit Clamp (5)
  • Conduit Connector (1)
  • Conduit Coupling (13)
  • Conduit Hanger (2)
  • Conduit Hanger With Bolt (2)
  • Conduit Hub (2)
  • Conduit Nipple (88)
  • Conduit Strap (11)
  • Conduit Support (16)
  • Conduit to Beam Fastener (7)
  • Conduit Union (1)
  • Conduit/Pipe to Flange Clip (3)
  • Coupler (4)
  • Coupling (4)
  • Cover (7)
  • Cushioned Clamp (1)
  • Elbow (24)
  • Electrical Metal Conduit (10)
  • Electrical Metallic Tube (7)
  • Emt Compression Coupling (21)
  • Emt Conduit Elbow (29)
  • Emt Set Screw Coupling (5)
  • Flexible Conduit (9)
  • Fluorescent Under Cabinet Lighting (4)
  • FM7 Cover Gasket 1/2 (1)
  • FMC-SWP 3/8" 14/3BKWEGN LN 6' 100PD (1)
  • Galflexâ® Type RWS Reduced Wall Steel Flexible Metal Conduit (7)
  • Galvanized Steel Rigid Conduit (15)
  • Ground Clamp Alum 1/2-1" (1)
  • Ground Clamp Alum 2 1/2-4" (1)
  • Hanger (3)
  • Hyg RDC BSHG 1"-1/2" 316 W/Cond Ent GSKT (1)
  • Hyg RDC BSHG 1"-3/4" 316 W/Cond Ent GSKT (1)
  • Hyg RDC BSHG 3/4"-1/2" 316 W/Cond Ent GSKT (1)
  • Intermediate Metal Conduit (9)
  • Knockout Seal (2)
  • LB Cond Body 1" 316 (1)
  • LB Cond Body 1-1/2" 316 (1)
  • LB Cond Body 1-1/4" 316 (1)
  • LB Cond Body 2" 316 (1)
  • LB Cond Body 3/4" 316 (1)
  • Liquid Tight 45° Connector (3)
  • Liquid Tight 45°Connector (3)
  • Liquid Tight 90° Connector (2)
  • Liquid Tight 90°Connector (2)
  • Liquid Tight Straight Connector (2)
  • Liquidtight Flexible Conduit (5)
  • Locknut (11)
  • Masonry Box (4)
  • MCNP12/2SOLBKRD 2#12N 12G AA 1000R (1)
  • Metal Clad Cable (9)
  • Metallic Liquidtight Fittings (3)
  • Pre-Assembled Pipe Clamp (3)
  • Punch & Die Set (2)
  • PVC Coated Steel Rigid Conduit Standard Radius Elbow (4)
  • RC Beam CLP Cond SZ 2IN Mall Iron (1)
  • RGD Cond CLP 1/2IN 14GA HDG Steel (1)
  • RGD Cond CLP 1-1/4IN 14GA HDG STL (1)
  • RGD Cond CLP 1IN 14GA HDG STL (1)
  • Rigid Conduit (4)
  • Rigid Conduit Coupling (12)
  • Rigid Conduit Elbow (26)
  • Rigid Conduit Lock Nut (1)
  • Rigid Conduit Nipple (81)
  • Sealing Locknut (6)
  • Set Screw Coupling (1)
  • Slotted Strut 1-5/8" 304 (1)
  • Slotted Strut 7/8" 304 (1)
  • SNAP2IT Snap In Duplex 3838 (1)
  • Steel Boxes and Covers (7)
  • STL Gangable Msnry Box 71.0 Cu-In (1)
  • Strut Clamp (6)
  • Strut Strap (17)
  • T Cond Body 1" 316 (1)
  • T Cond Body 1-1/2" 316 (1)
  • T Cond Body 1-1/4" 316 (1)
  • T Cond Body 2" 316 (1)
  • T Cond Body 3/4" 316 (1)
  • TB Cond Body 1" 316 (1)
  • TB Cond Body 1-1/2" 316 (1)
  • TB Cond Body 1-1/4" 316 (1)
  • TB Cond Body 2" 316 (1)
  • TB Cond Body 3/4" 316 (1)
  • TITAN2 Type CB Liquidtight Flexible Metal Conduit (2)
  • TITAN2 Type Ef Extra-Flexible Liquidtight Metal Conduit (4)
  • TITAN2 Type Ul Liquidtight Flexible Metal Conduit (10)
  • U-Bolt (3)
  • Universal Clamp (6)
  • Wall Conduit (5)
  • Show More...

• Brand

  

  • Adalet-PLM (1)
  • AFC CABLE SYSTEMS (1)
  • Allied Tube and Conduit (35)
  • American Fittings Corp (10)
  • Amfico (3)
  • Appleton (65)
  • Appleton/Oz Gedney (3)
  • APPOZGCOMM (7)
  • ARLINGTON (7)
  • Arlington Industries (4)
  • Blackclaw (2)
  • Bridgeport (24)
  • Bridgeport Fittings (21)
  • CALBRITE (78)
  • Calpipe Industries, Inc (10)
  • Carlon(R) (3)
  • Conduit (26)
  • Conduit Pipe Products (142)
  • Cooper B-Line/Cable Tray (1)
  • Crouse Hinds (1)
  • DURA-LINE CORPORATION (1)
  • Eaton (146)
  • EATON B-LINE SERIES (4)
  • EATON CROUSE-HINDS SERIES (30)
  • EC-KORNS (27)
  • ECN-KORNS (82)
  • Electri-Flex (4)
  • ELITE LIGHTING (4)
  • Flexible Conduit (108)
  • GREENLEE (18)
  • Haydon Corporation (1)
  • Ideal (4)
  • KILLARK (13)
  • Kindorf (8)
  • Klein Tools (6)
  • LEGRAND-PASS & SEYMOUR (1)
  • LH DOTTIE (4)
  • Milwaukee Electric Tool (1)
  • Milwaukee® (1)
  • Mulberry (1)
  • NSi (7)
  • nVent CADDY (38)
  • OCAL (5)
  • O-Z/GEDNEY (13)
  • Patriot Aluminum (4)
  • PLASTIBOND (125)
  • PLASTI-BOND (1)
  • RACO (15)
  • Robroy Stainless (38)
  • Robroy/Ecn Korns (1)
  • SNAP2IT (1)
  • Southwire (1)
  • Southwire Rough Electrical Com (153)
  • Steel City (93)
  • Superstrut (46)
  • T&B Ind Fitting (12)
  • T&B Liquidtight Systems (4)
  • T&B Rigid Fittings (1)
  • Thomas & Betts (3)
  • Thomas&Betts-Abb Ins Prod (4)
  • Topaz - Southwire CO LLC (2)
  • Topaz - Southwire LLC (3)
  • Topaz Electric - Southwire (2)
  • Unistrut Corp. (17)
  • WIREMOLD (3)
  • WIRING DEVICE-KELLEMS (7)
  • Show More...

• Finish

  

  • #4 Polished Finish (67)
  • 0.002 Inch Urethane Coated Interior, 0.04 Inch PVC Coated Exterior (4)
  • 2 Mil Red Urethane Coated (Interior), 40 Mil Gray PVC Coated (Exterior) Over Hot Galvanized (7)
  • 2 Mil Red Urethane Coated (Interior)/40 Mil Gray PVC Coated (Exterior) (8)
  • 2 Mil Red Urethane Coated Interior, 40 Mil Gray PVC Coated Exterior, A Clear Urethane Coated Thread (16)
  • 2 Mil Red Urethane Coated Interior/40 Mil Gray PVC Coated Exterior, Hot Dip Galvanized (2)
  • 2 Mil Red Urethane Coated Over Galvanized Threads Interior, 40 Mil Gray PVC Coated Exterior (4)
  • 20 MIL GRAY PVC COATED (1)
  • 20 Mil Gray PVC Coated (Exterior) (9)
  • 20 Mil Gray PVC Coated Exterior (3)
  • 40 MIL GRAY PVC COATED EXTERIOR, 2 MIL RED URETHANE COATED INTERIOR (3)
  • Aluminum (1)
  • Ball burnish (4)
  • Black Paint (1)
  • Black Phosphate (1)
  • Blue Paint (1)
  • Brushed (11)
  • Caddy Armour (5)
  • Caddy?® Armour (2)
  • CADDY® ARMOUR (1)
  • Castings: Hot Dip; Hardware: Mechanically Galvanized (4)
  • Electro Galvanized (16)
  • Electro Zinc Plated/Chromate Coating (3)
  • Electro-galvanized (32)
  • ELECTROGALVANIZED (19)
  • Electro-polished (18)
  • Electrostatic Powder Coat (1)
  • Enamel (4)
  • Epoxy Powder Coat (13)
  • Galvanized (349)
  • Galvanized Steel (1)
  • Galvanized;Bright Polished (1)
  • Galvanized-Krom (1)
  • Gold Galvanized (7)
  • GoldGalv/Standard (6)
  • Hot Dip Galvanized (50)
  • Hot Dip Galvanized, 0.002 Inch Urethane Coated Interior, 0.04 Inch PVC Coated Exterior (3)
  • Hot Dip Galvanized;PVC Coated (1)
  • HOT DIPPED GALVANIZED (3)
  • Hot-Dip Galvanize (3)
  • Hot-Dip Galvanized (3)
  • Hot-Dipped Galvanized (13)
  • Lime Green Paint (2)
  • Metallic (3)
  • Natural (11)
  • nVent CADDY Armour (5)
  • POLISHED (8)
  • Polyester Powder Coated (4)
  • Pre-Galvanized (22)
  • Pre-Galvanized Zinc (6)
  • PVC (4)
  • PVC Coating (2)
  • Ribbed (1)
  • Silver (6)
  • Silver Galvanized/Electro-Galvanized (6)
  • SilverGalv/Electro-Galvanized (5)
  • Smooth (3)
  • STAINLESS STEEL (3)
  • STAINLESS STEEL TYPE 304 (18)
  • STAINLESS STEEL TYPE 316 (7)
  • Thread: Hot Galvanized;Exterior: PVC Coated;Interior: Urethane (5)
  • TPR Jacket (4)
  • Untreated (7)
  • White Paint (1)
  • Zinc Electro Plated (4)
  • Zinc Electroplate (4)
  • Zinc Electroplated (28)
  • Zinc Electro-Plated (16)
  • Zinc Phosphate (11)
  • Zinc Phosphate & Oil (1)
  • Zinc Plated (70)
  • Show More...

• Trade Size

  

  • 0.375 (1)
  • 0.5 (1)
  • 0.5 in (14)
  • 0.75 (2)
  • 0.75 in (12)
  • 1 (32)
  • 1 1/2 INCH (2)
  • 1 1/4 (2)
  • 1 1/4 INCH (2)
  • 1 in (13)
  • 1 in;27 mm (2)
  • 1 INCH (40)
  • 1 PH (15)
  • 1.25 (5)
  • 1.25 in (16)
  • 1.5 (7)
  • 1.5 in in (14)
  • 1/2 (24)
  • 1/2 in (14)
  • 1/2 in;16 mm (2)
  • 1/2 INCH (34)
  • 1/2 to 3/4 in (4)
  • 1/2" (1)
  • 10-3 (1)
  • 1-1/2 (21)
  • 1-1/2 in (11)
  • 1-1/2 in;41 mm (3)
  • 1-1/2 INCH (28)
  • 1-1/4 (11)
  • 1-1/4 in (7)
  • 1-1/4 in;1-1/2 in (1)
  • 1-1/4 in;35 mm (3)
  • 1-1/4 INCH (27)
  • 12-2 (2)
  • 12-4 (2)
  • 1-5/8 (1)
  • 2 (24)
  • 2 1/2 (1)
  • 2 1/2 INCH (1)
  • 2 A (12)
  • 2 in (12)
  • 2 in;53 mm (3)
  • 2 INCH (46)
  • 2.00" (1)
  • 2.5 (7)
  • 2.50" (1)
  • 2-1/2 (3)
  • 2-1/2 IN (1)
  • 2-1/2 in;3 in (1)
  • 2-1/2 in;63 mm (2)
  • 2-1/2 INCH (28)
  • 2-1/2 Inch-8 TPI (1)
  • 3 (10)
  • 3 1/2 (1)
  • 3 1/2 INCH (1)
  • 3 in (15)
  • 3 in;78 mm (3)
  • 3 INCH (33)
  • 3.5 (2)
  • 3.5 in (7)
  • 3.50" (1)
  • 3/4 (24)
  • 3/4 in (21)
  • 3/4 in;21 mm (3)
  • 3/4 INCH (38)
  • 3/4" (1)
  • 3/8 (4)
  • 3/8 in (2)
  • 3/8 INCH (1)
  • 3/8" (1)
  • 3-1/2 (1)
  • 3-1/2 in (4)
  • 3-1/2 in;4 in (1)
  • 3-1/2 in;91 mm (2)
  • 3-1/2 INCH (16)
  • 3-1/2 Inch-8 TPI (1)
  • 31531 (11)
  • 4 (10)
  • 4 in (1)
  • 4 in , 103 mm (1)
  • 4 in;103 mm (3)
  • 4 INCH (38)
  • 4.00" (1)
  • 5 (1)
  • 5 INCH (4)
  • 6 (1)
  • 6 INCH (3)
  • 7/8 (1)
  • 798 (10)
  • Show More...

• Material

  

  • 0.002 Inch Urethane Coated Interior/0.04 Inch PVC Coated Exterior Steel (3)
  • 11 Gauge Low Carbon Steel (6)
  • 12 Gauge Ferrous Metal (7)
  • 12 Gauge Low Carbon Steel (6)
  • 14 Gauge Ferrous Metal (2)
  • 14 Gauge Low Carbon Steel (9)
  • 16 Gauge Low Carbon Steel (2)
  • 2 Mil Red Urethane Coated Interior/40 Mil Gray PVC Coated Exterior Aluminum (Body), Stainless Steel (Screw) (6)
  • 2 Mil Red Urethane Coated Interior/40 Mil Gray PVC Coated Exterior Ferrous Metal (1)
  • 2 Mil Red Urethane Coated Interior/40 Mil Gray PVC Coated Exterior Ferrous Metal (Body), Stainless Steel (Screw) (58)
  • 20 Mil Gray PVC Coated Stemped Steel (2)
  • 301 Stainless Steel (1)
  • 304 (2)
  • 304 Stainless Steel (20)
  • 316 (14)
  • 316 Stainless Steel (16)
  • 316 Stainless Steel (Body, Cover and Screws);Neoprene (Gasket) (1)
  • Aluminum (13)
  • Carbon Steel, Nickel Plated (2)
  • Castings: Malleable Iron, Hardware: Steel (4)
  • Cold Rolled High Carbon Steel (5)
  • ELECTROGALVANIZED STEEL (2)
  • Ferrous Metal (4)
  • Fiberglass (2)
  • Flat Rolled Steel (16)
  • Galvanized Steel (48)
  • HDPE;PVC Conduit;Stainless Steel (Clamp) (1)
  • HOT ROLLED OILED PICKLED ASTM A36/A635/A575/A576/A1008 STEEL (17)
  • Iron;Steel(Handle) (1)
  • Jacket: Thermoplastic;Core: Steel (5)
  • Low Carbon Steel (4)
  • Low-Carbon Steel (3)
  • Malleable Iron (12)
  • Malleable Iron (Body, Gland Nut);Steel (Ferrule, Lock Nut);Polyethylene (Sealing Ring);Thermoplastic Elastomer (Sealing Gasket) (7)
  • MALLEABLE IRON (CLAMP), STEEL (BOLT AND NUT) (13)
  • Metallic (1)
  • Non-Metallic (4)
  • Nylon (3)
  • Plastic (2)
  • Plated Steel (1)
  • Porcelain Steel (1)
  • Pressure Cast Aluminum (5)
  • Punch up to 10 ga mild steel (1)
  • Punch up to 10 ga mild steel or 12 ga stainless steel (1)
  • RED URETHANE 2 MIL COATED INTERIOR, GRAY PVC 40 MIL COATED EXTERIOR ALUMINUM (BODY), STAINLESS STEEL SCREW (1)
  • Rugged Steel (1)
  • SAND CAST ALUMINUM (1)
  • Silicon Bronze (1)
  • Spring Steel (12)
  • Stainless Steel (31)
  • Stainless Steel - 304L (14)
  • Stainless Steel - 316 (5)
  • Stainless Steel - 316L (6)
  • Stainless Steel, Aluminum, Neodymium Magnets (1)
  • Steel (560)
  • Steel (Body/Compression Nut/Sleeve);Neoprene (O-Ring);Nylon (Ferrule);Stainless Steel (Wire Mesh) (1)
  • Steel (Cover);Malleable Iron (Ball) (1)
  • Steel IN (107)
  • Steel, Zinc Plated (3)
  • Zinc (6)
  • Zinc Die-Cast (2)
  • Zinc Plated Machined Steel Screw/Malleable Iron (1)
  • ZINC PLATED STEEL (5)
  • Show More...

• Color

  

  • Beige (1)
  • Black (12)
  • Black (Cap) (4)
  • Black (Tape) (1)
  • Black with Brass Flange (1)
  • Black;Blue;White;Green (1)
  • Black;White;Green (4)
  • Black;White;Red;Blue;Green (1)
  • Black;White;Red;Green (2)
  • Blue (6)
  • Blue (Cap) (4)
  • Blue;White;Green (1)
  • Brown;Yellow;Gray;Green (1)
  • Clear/White (2)
  • Colorless (16)
  • Commercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - Other (4)
  • Glossy gray (8)
  • Gold (6)
  • Gray (37)
  • Gray;Brown;Green (1)
  • Green (3)
  • Green (Cap) (2)
  • Ivory (3)
  • MALLEABLE IRON (8)
  • Metallic (21)
  • Metallic Body/Green Nut (7)
  • N/A (4)
  • Natural (5)
  • Orange (Cap) (4)
  • Polished Silver (68)
  • Purple;Gray;Green (1)
  • Red (4)
  • Red (Cap) (2)
  • Red (Tape) (2)
  • Red;White;Green (1)
  • Silver (80)
  • White (4)
  • Yellow (2)
  • Yellow (Cap) (3)
  • Yellow;Gray;Green (1)
  • Show More...

• Sub Brand

  

  • Bolted Framing (3)
  • CADDY (20)
  • Commercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - Other (4)
  • ETP (4)
  • Fasteners (2)
  • Kindorf(R) (1)
  • Liquatite (4)
  • Liquidator(TM) (7)
  • Pentair (13)
  • Phoenix (141)
  • Snap Guard(R) (1)
  • Steel City(R) (5)
  • Superstrut(R) (22)
  • Unilets(TM) (4)
  • Show More...

• Model

  

  • 16M24SM (1)
  • 5000S (1)
  • 6000S (6)
  • 812M24 (1)
  • 812M24SM (1)
  • CS812 (1)
  • CS812D (1)
  • GALCPLG (1)
  • GALELB (24)
  • GALNIP (70)
  • PBC105 (3)
  • PBPS (2)
  • PBRA (2)
  • PLG (4)
  • PRCONDUIT (8)
  • PRHNIP (16)
  • PV (7)
  • Series PBC105 (2)
  • Series PBRA (1)
  • Series PRCPLG (1)
  • Series PRHELB (3)
  • ST (2)
  • Show More...

• Current Rating

  

  • 20 A (11)
  • 30 A (2)
  • Show More...

• Overall Height

  

  • 1.5" (4 cm) (1)
  • 12" (30.5 cm) (1)
  • 2.3 (2)
  • 2.502 (2)
  • 2.52 in;64 mm (1)
  • 2.78 (1)
  • 2.95 (2)
  • 3.484 (1)
  • 3.514 (1)
  • 3.829 (1)
  • 3.859 (1)
  • 3.95 (1)
  • 4.11 (1)
  • 4.15 (1)
  • 4.29 (1)
  • 4.32 (1)
  • 5.37 (1)
  • 5.46 (1)
  • 8.81" (22.4 cm) (1)
  • Show More...

• Voltage Rating

  

  • 120 V (4)
  • 300 (1)
  • 600 V (13)
  • 600V (44)
  • Show More...

• Length

  

  • 0.146828 (1)
  • 1 (3)
  • 1 in (3)
  • 1.32 (2)
  • 1.375 in (1)
  • 1.38 (1)
  • 1.41 (2)
  • 1.437 (1)
  • 1.44 (1)
  • 1.5 (1)
  • 1.5 in in (2)
  • 1.50 in;38.1 mm (1)
  • 1.56 (1)
  • 1.563 INCH (1)
  • 1.625 in (4)
  • 1.625 INCH (1)
  • 1.640625 (1)
  • 1.66 in;42.2 mm (1)
  • 1.687 (1)
  • 1.8 INCH (1)
  • 1.959 in (1)
  • 1.96875 in (1)
  • 1/2 in (2)
  • 10 (3)
  • 10 A (9)
  • 10 Foot (11)
  • 10 ft (19)
  • 10 INCH (15)
  • 10.19 (1)
  • 100 (8)
  • 100 ft (5)
  • 1000 (20)
  • 10351 (1)
  • 11.27 (3)
  • 1-1/2 INCH (3)
  • 1-1/4 (1)
  • 1-1/4 in (2)
  • 1-1/8 INCH (2)
  • 1-13/32 (2)
  • 118.92 (3)
  • 12 (2)
  • 12 INCH (24)
  • 12.3 (1)
  • 12.55 (3)
  • 120 (21)
  • 1200 (4)
  • 12-1/4 in (1)
  • 125 (1)
  • 13.61 (1)
  • 13.69 (1)
  • 13.7 (1)
  • 13.87 (1)
  • 1-3/4 INCH (1)
  • 1-3/8 in (1)
  • 1-3/8 INCH (2)
  • 1-31/32 (1)
  • 15.12 (1)
  • 15.29 (1)
  • 15.33 (1)
  • 1-5/8 (1)
  • 150 (2)
  • 16.42 (1)
  • 16.60 (1)
  • 18.34 (1)
  • 2 (1)
  • 2 A (6)
  • 2 in (1)
  • 2 INCH (12)
  • 2.03125 (2)
  • 2.0625 in (1)
  • 2.063 Inch (2)
  • 2.125 Inch (1)
  • 2.13 (1)
  • 2.15 (1)
  • 2.312 (1)
  • 2.38 (2)
  • 2.43 (1)
  • 2.5 (1)
  • 2.5 in (1)
  • 2.50 in;63.5 mm (3)
  • 2.500 in (1)
  • 2.56 INCH (1)
  • 2.58 (1)
  • 2.59 in;65.8 mm (1)
  • 2.6 (1)
  • 2.625 in (1)
  • 2.75 in (1)
  • 2.875 in (1)
  • 2.88 (1)
  • 2.9 IN (1)
  • 200 (2)
  • 2000 (1)
  • 2-1/2 (1)
  • 2-1/2 in (1)
  • 2-1/2 INCH (2)
  • 2-11/32 in (1)
  • 2-3/4 INCH (2)
  • 24-1/2 in (1)
  • 25 (7)
  • 25 ft (3)
  • 250 (36)
  • 3 in (7)
  • 3 INCH (16)
  • 3.125 Inch (1)
  • 3.25 (1)
  • 3.25 INCH (1)
  • 3.31 (1)
  • 3.375 Inch (1)
  • 3.40625 in (1)
  • 3.5 in (4)
  • 3.5 INCH (1)
  • 3.515625 (1)
  • 3.63 (2)
  • 3.75 (1)
  • 3.75 INCH (1)
  • 3.833 (1)
  • 3/4 in (1)
  • 3/8 in (1)
  • 300 (1)
  • 3-1/4 in (2)
  • 31531 (7)
  • 3-3/16 in (1)
  • 3-3/4 in (6)
  • 33-1/2 in (1)
  • 3-5/16 in (1)
  • 3-9/32 in (1)
  • 4 (3)
  • 4 in (1)
  • 4 in;101.6 mm (1)
  • 4 INCH (19)
  • 4.06 (1)
  • 4.130" (1)
  • 4.25 (1)
  • 4.25 in (1)
  • 4.31 (1)
  • 4.5 (1)
  • 4.5 INCH (1)
  • 4.75 in;120.7 mm (1)
  • 4.97 (1)
  • 400 (1)
  • 4-1/2 in (1)
  • 4-13/16 in (1)
  • 42-1/2 in (1)
  • 4-3/16 in (1)
  • 4-3/8 in (1)
  • 4-5/16 in (1)
  • 4-7/8 in (1)
  • 5 (4)
  • 5 A (9)
  • 5 INCH (10)
  • 5.13 (2)
  • 5.570 in (1)
  • 5.72 (2)
  • 5.74 (2)
  • 5.94 (1)
  • 5.99 (3)
  • 50 (1)
  • 50 ft (4)
  • 500 (3)
  • 5-1/4 in (1)
  • 51869 (9)
  • 52062 (1)
  • 6 (5)
  • 6 ft (1)
  • 6 in (10)
  • 6 INCH (35)
  • 6.54 (3)
  • 6.59 (2)
  • 6.67 (1)
  • 6.68 (2)
  • 600 (2)
  • 6-1/2 (1)
  • 7 (1)
  • 7.13 (1)
  • 7.44 (1)
  • 7.49 (1)
  • 7.53 (1)
  • 7.64 (1)
  • 7.69 (3)
  • 7.88 (1)
  • 78217250333 (1)
  • 78217250413 (1)
  • 798 (10)
  • 8 (1)
  • 8 Each (9)
  • 8 INCH (15)
  • 8.13 (2)
  • 8.56 (1)
  • 8.7 (1)
  • 8.87 (3)
  • 9 ft 10-1/2 in (4)
  • 9 ft 10-1/4 in (3)
  • 9 ft 11 in (8)
  • 9 ft 11-1/4 in (4)
  • 9.19 (1)
  • 9.9 (1)
  • 9.92 (3)
  • 9.94 ft;3.03 m (1)
  • Outside Diameter (2)
  • Show More...

• Shape

  

  • Rectangular (5)
  • Round (12)
  • Square (2)
  • Straight (4)
  • Show More...

• Mounting Type

  

  • keyhole Mount (4)
  • Screw (3)
  • Screw Mount (6)
  • Screw On (4)
  • Wall Mount;Ceiling Mount (2)
  • Show More...

• Capacity

  

  • 1 In (1)
  • 1/2 In (1)
  • 1000 lb (1)
  • 1-1/2 In (1)
  • 1-1/4 In (1)
  • 14 ga (1)
  • 15.5 cu.in (1)
  • 1650 lb (3)
  • 2 In (1)
  • 200 lb (4)
  • 21 cu.in (1)
  • 2-1/2 In (1)
  • 22 cu.in (1)
  • 3 In (1)
  • 3-1/2 In (1)
  • 350 lb (2)
  • 4 cu.in (1)
  • 4 In (1)
  • 400 lb (2)
  • 400 lb, 1.78 kN (Design Load 1);50 lb, 0.22 kN (Design Load 2, 3) (2)
  • 44 cu.in (1)
  • 550 lb (2)
  • 58 cu.in (1)
  • 66 cu.in (1)
  • 750 lb (7)
  • 800 lb (9)
  • Show More...

• Diameter

  

  • 0.709 to 1.181 in (OD) (4)
  • 0.813 in (1)
  • 1 in (2)
  • 1.093 INCH (1)
  • 1.181 to 1.378 in (OD) (1)
  • 1.25 in (1)
  • 1.31 in (1)
  • 1.31 in;33.3 mm (1)
  • 1.38 in;35.1 mm (1)
  • 1.563 in (2)
  • 1.63 in;41.4 mm (1)
  • 1.69 in;42.9 mm (1)
  • 1.94 in;49.3 mm (1)
  • 1/2 in (1)
  • 1-1/2 in (1)
  • 1-1/8 in (2)
  • 1-11/16 in (1)
  • 1-15/16 in (1)
  • 1-17/32 in (1)
  • 1-29/32 in (1)
  • 1-3/4 in (1)
  • 1-3/8 in (2)
  • 1-5/16 in (1)
  • 1-9/32 in (1)
  • 2.38 in;60.5 mm (1)
  • 2.438 in (2)
  • 2.95 Inch (1)
  • 2-1/16 in (1)
  • 2-3/8 in (2)
  • 2-7/8 in (2)
  • 2-9/16 in (1)
  • 3.84 INCH (1)
  • 30.96 mm (1)
  • 3-1/4 in (1)
  • 3-3/8 in (1)
  • 4.188 in (1)
  • 4.25 in;108.0 mm (1)
  • 4.5 INCH (1)
  • 4-1/16 in (1)
  • 4-1/2 in (1)
  • 4-1/8 in (1)
  • 4-13/16 in (1)
  • 4-5/16 in (1)
  • 4-5/8 in (1)
  • 5 in (1)
  • 5-1/4 in (1)
  • 5-1/8 in (1)
  • 7.5'' (19.1 cm) (1)
  • 9" (23 cm) (1)
  • Show More...

• Width

  

  • .94 in (1)
  • 0.625 (1)
  • 0.75 in (2)
  • 1 (1)
  • 1 in (2)
  • 1.000" (1)
  • 1.05 (1)
  • 1.188 (1)
  • 1.25 (1)
  • 1.25 in (1)
  • 1.315 (1)
  • 1.32 (2)
  • 1.35 (2)
  • 1.453 (1)
  • 1.55 (2)
  • 1.570 in (1)
  • 1.63 (2)
  • 1.719 (1)
  • 1.75 (3)
  • 1.78 (3)
  • 1.9 (1)
  • 1/8 in (1)
  • 1-1/2 in (1)
  • 1-1/4 in (7)
  • 1-13/16 in (2)
  • 2 (5)
  • 2.13 (3)
  • 2.17 (2)
  • 2.19 (1)
  • 2.25 (1)
  • 2.33 (1)
  • 2.375 (1)
  • 2.38 (2)
  • 2.48 (2)
  • 2.53 (3)
  • 2.79 (3)
  • 2.89 (1)
  • 2.94 (1)
  • 2-1/2 (1)
  • 2-3/4 (1)
  • 3 (3)
  • 3.19 (1)
  • 3.4 (1)
  • 3.46 (3)
  • 3.59 (3)
  • 3.91 (1)
  • 3/16 in (8)
  • 3-1/2 (1)
  • 3-1/4 (2)
  • 3-5/8 in (1)
  • 4 (16)
  • 4 in;101.6 mm (1)
  • 4.06 (2)
  • 4.61 (2)
  • 4.64 (1)
  • 4.65 (2)
  • 4.688 (3)
  • 4.7 (1)
  • 4-11/16 (5)
  • 5 in (4)
  • 5.81 (1)
  • 5.85 (1)
  • 5.87 (1)
  • 5.90 (1)
  • 5-7/16 in (1)
  • 5-9/16 (1)
  • 6.2 (1)
  • 6.28 (1)
  • 7.21 (1)
  • 7.6 (1)
  • 7.61 (1)
  • 7/32 in (1)
  • 7/8 in (1)
  • 8-5/8 in (1)
  • 9/64 in (1)
  • Show More...

• Number Of Conductors

  

  • 1 (1)
  • 2 (27)
  • 3 (20)
  • 4 (8)
  • 5 (2)
  • Show More...

• Bend Radius

  

  • 10.0 (1)
  • 10.5 INCH (7)
  • 12 in (1)
  • 13 INCH (7)
  • 15 INCH (3)
  • 16 INCH (10)
  • 18 in (1)
  • 24 INCH (4)
  • 30 INCH (1)
  • 36 INCH (5)
  • 4 in (2)
  • 4 INCH (2)
  • 4.0 (1)
  • 4.25 INCH (1)
  • 4.5 (1)
  • 4.5 INCH (5)
  • 4-1/2 Inch (2)
  • 48 INCH (1)
  • 5 in (2)
  • 5 in;127 mm (1)
  • 5.75 INCH (8)
  • 6 in (1)
  • 6.5 in (1)
  • 7 in;178 mm (1)
  • 7.25 INCH (5)
  • 7.5 in (1)
  • 7.845 (2)
  • 8 in (2)
  • 8.25 INCH (4)
  • 8.43 (1)
  • 8.79 (1)
  • 8-1/4 Inch (1)
  • 9 in (1)
  • 9.0 (1)
  • 9.5 INCH (10)
  • Show More...

• Conductor Size

  

  • #10 AWG (2)
  • #12 AWG (11)
  • 10 (7)
  • 12 (34)
  • 12 AWG Conductor And Ground (1)
  • 14 (2)
  • 6 (1)
  • Show More...

• Height

  

  • 0.1 (1)
  • 0.25 (1)
  • 0.312 (1)
  • 0.81 (1)
  • 0.83 (1)
  • 0.99 (1)
  • 1 (4)
  • 1.03 (1)
  • 1.63 (2)
  • 1.7 (3)
  • 1.98 (3)
  • 1/2 in (1)
  • 1/2 in;12.7 mm (1)
  • 1-1/2 in;38.1 mm (1)
  • 1-1/8 in (4)
  • 1-5/8 in (1)
  • 2 (3)
  • 2.00 (2)
  • 2.03 (1)
  • 2.05 (1)
  • 2.06 (1)
  • 2.185 in (1)
  • 2.23 (3)
  • 2.3 (1)
  • 2.31 (2)
  • 2.33 (1)
  • 2.45 (1)
  • 2.63 (1)
  • 2.750 in (1)
  • 2.81 (1)
  • 2.85 (1)
  • 2-1/16 in (1)
  • 2-1/2 in (1)
  • 2-3/4 (1)
  • 2-9/16 in (1)
  • 3 (1)
  • 3.03 (1)
  • 3.06 (1)
  • 3.1 (3)
  • 3.13 (1)
  • 3.22 (1)
  • 3.23 (1)
  • 3.35 (3)
  • 3.5 (1)
  • 3.7 (1)
  • 3.88 (2)
  • 3.93 (1)
  • 3-1/2 in (3)
  • 3-1/4 (2)
  • 3-3/4 (1)
  • 4 (12)
  • 4.15 (2)
  • 4.31 (2)
  • 4.48 (1)
  • 4.5 (1)
  • 4.52 (1)
  • 4.55 (1)
  • 4.56 (1)
  • 4-11/16 (5)
  • 5.62 (1)
  • 5.93 (1)
  • 5-1/4 (1)
  • 6.24 (1)
  • 6.32 (1)
  • 7.77 (1)
  • Show More...

• Overall Width

  

  • 0.75" (2 cm) (1)
  • 1.76 (3)
  • 1.875 in (1)
  • 2.06 (3)
  • 2.46 (2)
  • 2.74 (3)
  • 3.02 (1)
  • 3.409 (1)
  • 3.46 (2)
  • 3.83 (1)
  • 4.13 (1)
  • 5.03 (1)
  • 7.55" (19.2 cm) (1)
  • 9 in;228.6 mm (1)
  • 9.06" (23 cm) (1)
  • Show More...

• Number Of Gangs

  

  • 1 (2)
  • 2 (1)
  • 3 (2)
  • Show More...

• For Use With

  

  • 1/2 in thru 4 in Conduit (1)
  • 1-1/2 in Deep Box;EMT Conduit and MC/AC Cable (1)
  • 1-1/4" Bender Head (Cat. No. 56211) (1)
  • 2-1/8 in Deep Box;EMT Conduit and MC/AC Cable (1)
  • 3/8 in Wall Board and Plaster;1/2 in Wall Board and Plaster;5/8 in Wall Board and Plaster (2)
  • 4 in Square Box Partitions (1)
  • Box;Enclosure (1)
  • Cable Tray (6)
  • Circuit Wiring (4)
  • Conduit (6)
  • Conduit Outlet Body (4)
  • Conduit Runs (1)
  • Conduit/Pipe or Cable From Beam Flanges (3)
  • Datacom and Low Voltage;Electrical (1)
  • EMT and Rigid Conduit to Threaded Rod (1)
  • EMT Conduit (19)
  • EMT Conduit;Boxes and Enclosures (7)
  • EMT/Rigid Conduit (7)
  • Fasten Threaded Rigid/IMC Conduit to Box/Enclosure (10)
  • Fasteners;Beam Fasteners;Supports Conduit and Electrical Boxes (1)
  • Fasteners;Conduit Fasteners (8)
  • Fasteners;Conduit Fasteners for Supporting Horizontal Boxes;Conduit Above T-Bar (1)
  • Fasteners;Conduit Fasteners Provides Support for Conduit on Either Side of Electrical Box (1)
  • Fasteners;Conduit Fasteners;Rigid Conduit (1)
  • Fasteners;Wire Fasteners (1)
  • For Hickeys (1)
  • Form35(R) Unilet(R) Conduit Outlet Body (3)
  • Gang Box (1)
  • Liquidtight Flexible Metallic Conduit (7)
  • Liquidtight Flexible Non-Metallic Conduit (1)
  • Mounting Pendant Or Fluorescent Lighting Fixtures to Ceiling Box (1)
  • Non-Metallic Sheathed Cable (1)
  • Pipe Conduit (1)
  • Rigid and EMT Conduit;Pipe (3)
  • Rigid Conduit and Pipe (1)
  • Rigid Conduit;IMC Conduit (6)
  • Rigid/IMC Conduit;Pipe and Electric Metal Tubing (16)
  • Squeeze Connectors Will Fit Every Size of Armored Cable, Leaded Cable and Flexible Conduit;Armored Cable and Flexible Metal Conduit (1)
  • Thin Wall (EMT), IMC, Rigid Conduit or Pipe (2)
  • Threaded Metal Conduit (4)
  • To Secure Pipes, Tubes and Hoses for Fluid Conductors (1)
  • Two Lengths of EMT Conduit;Rigid and IMC Conduit (4)
  • V500/V700/V700H Series One Piece Steel Surface Raceway (1)
  • Show More...

• Overall Length

  

  • 1.2" (3 cm) (1)
  • 10.1 (3)
  • 10.85 (1)
  • 1000 ft (1)
  • 11.3" (29 cm) (1)
  • 11.7 (2)
  • 2.17 (1)
  • 2.6 (1)
  • 2.75 (1)
  • 250 ft (12)
  • 3 (1)
  • 36.45" (92.6 cm) (1)
  • 5.16" (13.1 cm) (1)
  • 54 in (1)
  • 54" (137.2 cm) (1)
  • 6.4 (1)
  • 7.18 (3)
  • 7.458 (1)
  • 7.625 in (1)
  • 8.22 (1)
  • 8.266 (3)
  • 9.03 (2)
  • 9.28 (1)
  • Show More...

• Outside Diameter

  

  • 0.44678 (1)
  • 0.4746 (8)
  • 0.475 in (7)
  • 0.485 (1)
  • 0.49448 (3)
  • 0.4976 (1)
  • 0.50478 (7)
  • 0.505 in (1)
  • 0.513 in (2)
  • 0.523 (2)
  • 0.52699 (1)
  • 0.53876 (4)
  • 0.54178 (3)
  • 0.542 in (1)
  • 0.547 in (1)
  • 0.562 (1)
  • 0.5636 (2)
  • 0.5744 (1)
  • 0.5746 (1)
  • 0.58 in (1)
  • 0.585 (2)
  • 0.586 (1)
  • 0.6 (1)
  • 0.6048 (1)
  • 0.60665 (1)
  • 0.62273 (2)
  • 0.71 (2)
  • 0.77 (1)
  • 0.820/0.840 (1)
  • 0.84 (2)
  • 0.84 in (12)
  • 0.840 (1)
  • 0.92 (2)
  • 1.01 in (1)
  • 1.015 in (11)
  • 1.05 (5)
  • 1.12 (1)
  • 1.13 (1)
  • 1.16 (2)
  • 1.25 in (1)
  • 1.3 (1)
  • 1.300/1.380 (1)
  • 1.31 (3)
  • 1.315 (3)
  • 1.315 in (11)
  • 1.32 (2)
  • 1.38 (1)
  • 1.5 (1)
  • 1.51 (1)
  • 1.525 in (2)
  • 1.63 (2)
  • 1.630/1.660 (1)
  • 1.66 (1)
  • 1.66 in (10)
  • 1.660 (1)
  • 1.69 (2)
  • 1.74 (3)
  • 1.865/1.900 (1)
  • 1.869 in (2)
  • 1.88 (1)
  • 1.9 (2)
  • 1.9 A (11)
  • 1.94 (2)
  • 1.98 (1)
  • 1035 (1)
  • 1040 (2)
  • 1075 (2)
  • 1-15/32 (1)
  • 1-29/32 (1)
  • 1305 (2)
  • 1340 (1)
  • 1590 (1)
  • 1645 (3)
  • 1882 (1)
  • 1-9/16 (2)
  • 1900 (1)
  • 2.07 (1)
  • 2.155 in (1)
  • 2.2 (2)
  • 2.31 (2)
  • 2.340/2.375 (1)
  • 2.375 (2)
  • 2.38 (2)
  • 2.39 (1)
  • 2.46 (1)
  • 2.469 (1)
  • 2.65 in (2)
  • 2.69 (1)
  • 2.875 in (8)
  • 2-3/8 IN (8)
  • 2357 (1)
  • 2400 (2)
  • 2-5/8 (1)
  • 2857 (1)
  • 2960 (1)
  • 3 (1)
  • 3.13 (2)
  • 3.5 (1)
  • 3.5 in (7)
  • 3.75 (2)
  • 3.87 in (1)
  • 3-1/2 (1)
  • 3-1/4 (1)
  • 3460 (1)
  • 3480 (1)
  • 35340020X (1)
  • 3874 (1)
  • 3960 (1)
  • 4.13 (2)
  • 4.25 (1)
  • 4.5 (1)
  • 4.63 (2)
  • 4.75 (2)
  • 4.875 in (1)
  • 4460 (1)
  • 4480 (1)
  • 5.15 (1)
  • 51894 (8)
  • 585 (1)
  • 700 (2)
  • 798 (4)
  • 830 (4)
  • 890 (2)
  • Show More...

• Knockout Size

  

  • 1/2 in (2)
  • 1/2 in (Bottom);3/4 in (Bottom);1/2 in (Side);3/4 in (Side);1/2 in (End);3/4 in (End) (1)
  • 1/2 in;3/4 in (1)
  • 1/2 to 3/4 in (Conduit Concentric) (4)
  • Show More...

• Special Features

  

  • 1 1/4-2 Pipe Size - Clamp Style Hub (1)
  • 1 Hub Size - 10 SOL - 3/0 STR (1)
  • 1 IN Compression Coupling, Made in USA, Concretetight, Raintight (wet locations) Canada (1)
  • 1/2 Hub Size - 10 SOL - 2/0 STR (1)
  • 1/2-1 Pipe Size - Clamp Style Hub (1)
  • 1/2-1 Pipe Size - Dual Rated Ground Clamp - Zinc Plated Screws (1)
  • 2 1/2-4 Pipe Size - Dual Rated Ground Clamp - Zinc Plated Screws (1)
  • 3/4 Hub Size - 10 SOL - 2/0 STR (1)
  • 3/8 to 1-1/4 In Raised Adjustable (1)
  • Accepts all standard device covers and tile rings and is available in all box sizes and conduit styles (1)
  • Accommodates 1/2 in Through 4 In. EMT or Rigid Conduit (3)
  • Accommodates 1/2 in. through 4 in. EMT or rigid conduit (8)
  • Accurately tapped, tapered threads for tight, rigid joints and excellent ground continuity;Allow connections for branch runs;Completely interchangeable with Crouse-Hinds Form 7 bodies, gaskets and covers;Connect and change direction of conduit runs;Equivalent FM7 and Form 7 units have identical applications and installation dimensions;Fits flush and snug against flat surfaces for more stable installation;Flat back design provides greater cubic content for easier wire pulling and more room for splicing;Hub (7)
  • Accurately tapped, tapered threads for tight, rigid joints and excellent ground continuity;Allow connections for branch runs;Connect and change direction of conduit runs;Form 85 copper free aluminum Unilets are lightweight, self oxidizing, self-renewing and offer a high corrosion resistance;Internal volume and maximum wire capacity clearly marked on castings;Lightweight aluminum facilitates shipping, handling and installing;Make bends in conduit system;Permit access to conductors for maintenance;Provide op (3)
  • Accurately tapped, tapered threads for tight, rigid joints and excellent ground continuity;Allow connections for branch runs;Connect and change direction of conduit runs;Form 85 copperfree aluminum Unilets are lightweight, self oxidizing, self-renewing and offer a high corrosion resistance;Internal volume and maximum wire capacity clearly marked on castings;Lightweight aluminum facilitates shipping, handling and installing;Make bends in conduit system;Permit access to conductors for maintenance;Provide ope (3)
  • Air plenum (1)
  • All steel construction. Accepts MC, AC, Rommex or Conduit. Devices not included (1)
  • Allows Conduit To Clear Drop Wires (1)
  • Approved for use in wet locations;Stainless steel screws;The cover is secured with clips, not screws;Unique Wedge-Lok clip cover design allows easy removal without damaging the conduit body;Wiring capacity: 16 CU-IN as per NEC 314.16(A) (1)
  • Approved for use in wet locations;Stainless steel screws;The cover is secured with clips, not screws;Unique Wedge-Lok clip cover design allows easy removal without damaging the conduit body;Wiring capacity: 2 CU-IN as per NEC 314.16(A) (1)
  • Approved for use in wet locations;Stainless steel screws;The cover is secured with clips, not screws;Unique Wedge-Lok clip cover design allows easy removal without damaging the conduit body;Wiring capacity: 3 CU-IN as per NEC 314.16(A) (1)
  • Assembled with 1/4-20 X 2 IN combo round head screws and hex nuts (1)
  • Assembly includes steel clamp with bolt/locknut and cushion (1)
  • Assembly Includes Steel Clamp With Bolt/Locknut and Cushion;To Secure Pipes, Tubes and Hoses For Fluid Conductors;Candle Temperature from -40 to +300°F (1)
  • Available with bolt or swing bolt (1)
  • Ball Type Swivel Fixture (1)
  • Bolt and Thread (1)
  • Bolt head is combination slot and hex head for flexibility of attachment (34)
  • Cable tray rated, install per NEC; May be surfaced mounted and embedded in plaster; Environmental air-handling space installation per NEC 300.22; UL Classi?ed 1, 2, and 3 hour through (Fire) penetration product, R-14141; Made in USA of US and/or imported materials; ColorSpec ID system (1)
  • CLAMP,CONDUIT,1 WITH BOLT (1)
  • CLAMP,STRUT,1 1/4 RIGID PIPE (1)
  • CLAMP,STRUT,3 RIGID PIPE ,E-GALV (1)
  • CLAMP,STRUT,4 RIGID PIPE EG (1)
  • CLAMP,STRUT,ONE PIECE 1 1/2 EMT 1 1/4 RIGID (1)
  • CLAMP,STRUT,ONE PIECE 1 EMT 3/4 RIGID (1)
  • CLAMP,STRUT,ONE PIECE 1/2EMT (2)
  • CLAMP,STRUT,ONE PIECE 2 EMT 1 1/2 RIGID (1)
  • CLAMP,STRUT,ONE PIECE 3 EMT 3 RIGID (1)
  • CLAMP,STRUT,ONE PIECE 3/4EMT 1/2 RIGID (2)
  • CLAMP,STRUT,ONE PIECE 4 EMT 4 RIGID (1)
  • CLAMP,STRUT,STEEL,2 1/2IN2 1/2 EMT/RIGID (1)
  • CLAMP,STRUT,STEEL,3 1/2IN3 1/2 EMT/RIGID (1)
  • Claws provide temporary support for proper positioning until permanently installed (3)
  • CLIP,CONDUIT,1/2 TO 3/4 9/32 PLAIN MTNG HOLE (1)
  • Color-Coded Thread Protectors (3)
  • Color-Coded Thread Protectors for Easy Identification of Conduit Size (1)
  • Combination cover screw heads provide for faster mudring/cover installation (2)
  • Combination cover screw heads provide for faster mudring/cover installation; raised ground provision in back of box (2)
  • Combination screw heads provide for faster installation (1)
  • Comes with Carriage Bolt and Nut (3)
  • Concentric and Eccentric Knockouts;Use in Fire-Rated Assemblies (4)
  • Concrete Tight (16)
  • Concrete tight when taped (3)
  • Concrete Tight, Raintight (2)
  • Concretetight (3)
  • Concrete-Tight (13)
  • Concretetight When Taped (6)
  • Concrete-Tight;Raintight (13)
  • CONDUIT CLIP,1 IN CONDUIT,1/8 TO 1/4 IN FLANGE (5)
  • CONDUIT CLIP,3/8 AC/MC CABLE,1/8 TO 1/2IN FLANGE (1)
  • Constructional Feature Concrete Tight Seal Against Oil, Water, Dirt and Chemical (1)
  • Corrosion Resistant (7)
  • Corrosion Resistant;Oil Resistant;Sunlight Resistant (5)
  • Corrosion Resistant;Rust Resistant (7)
  • Coupling Included (5)
  • Cover Screws Supplied with Box (1)
  • Designed to meet UL 360 ID/OD dimension requirements (4)
  • Detachable Body;Precision Machined 45° and 90° Edges;Rare-Earth Magnets (1)
  • Die cast adjusting ring with unique snap-on feature which eliminates gluing (1)
  • Die Cast Aluminum;Smooth, Corrosion-Resistant Electrostatic Powder Coating;Available Unassembled (Body Only) or Assembled with Matching Steel Cover and Gasket;All 22 - 4" Conduit Bodies and All SLBs come Assembled with Steel Cover and Gasket;Cubic Capacity and Listings Clearly Marked (1)
  • Ears (3)
  • Easily installs; Capable of withstanding heavy loads; Three styles meet every installation need, heavy duty u-bolts, hex bolts and hex nuts (4)
  • Electric Resistant;Corrosion Resistant (9)
  • Excellent Pull Out Strength on HDPE, PVC, FRP and Steel (1)
  • Explosionproof, dust-ignitionproof; Smooth, rounded integral bushing in each hub protects conductor insulation; Accurately tapped, tapered threads for tight, rigid joints and ground continuity (1)
  • Explosionproof;Dust-Ignitionproof;Smooth;Rounded Integral Bushing (4)
  • Features: Assembled, Includes Screw and Threaded Strap (2)
  • Features: Bolts and Nuts Attached (1)
  • Features: PVC Sealing Ring, Used wherever a Liquid Tight Application is Needed (1)
  • Features: Rugged, Steel Construction For Long-Term Durability; Baked-On Blue Enamel Finish Resists Corrosion And Enhances Visibility; Convenient Bending Guide For Offset Bends;Lifetime Warranty; Finish: Enamel; Length: 44 IN (1)
  • Features:Rugged, Steel Construction for Long-Term Durability;Baked-On Blue Enamel Finish Resists Corrosion and Enhances Visibility;Convenient Bending Guide for Offset Bends;Lifetime Warranty;Finish:Enamel;Length:54 in (1)
  • Fits 1/8"-1/4" Flange Fits 1/2" EMT (1)
  • Fixture Rated (5)
  • Flange Thickness 1/8 To 1/4 In, Rotation 360 Deg Pivot, Static Load Capacity 25 Lb (3)
  • Flange Thickness 1/8 To 1/4 In, Rotation 360 Deg Pivot, Static Load Capacity 75 Lb (3)
  • For 1-1/2 in Deep Box;Easily Locate the Fastener on the Stud, Keeping Your Conduit in Line with Box Knock Out and H-Series Brackets;For Wood or Metal Stud;Eliminates Offset Bending of Conduit (1)
  • For 2-1/8 in Deep Box;Easily Locate the Fastener on the Stud, Keeping Your Conduit in Line with Box Knock Out and H-Series Brackets;For Wood or Metal Stud;Eliminates Offset Bending of Conduit (1)
  • For use with new Greenlee KRW-1 high-leverage ratchet wrench. Slug-Buster® punch profile splits slugs for easy slug removal. Knurled edge on punches for better grip. New die design optimized for widest range of materials and drivers. Laser markings for quick part identification. Alignment markings for improved accuracy. Easy threading - draw studs with "dog point" tip helps eliminate cross-threading. Punches, dies and case made in the USA. Draw stud manufactured in the USA from US and global components. (1)
  • Free Fitting Threads Ensure Easy Assembly (5)
  • Galvanized interlocking steel strip, utilizes ColorSpec® ID system (1)
  • Galvanized steel. 316 stainless steel screws. Natural finish. (5)
  • Gangable, With 1/2 IN Conduit Knockouts, With Plaster Ears, 2 IN Deep (1)
  • Glow-in-the-Dark Tape and Tip, Clear Case, Removable Tape, Equipped with Fish Rod Attachment Connector (2)
  • Hardened Steel, Malleable Iron, Copper-Free Aluminum Construction (1)
  • Heavy duty material and zinc plating thickness (13)
  • Heavy duty U-bolts, hex bolts, and hex nuts. Capable of supporting heavy loads. (1)
  • High strength steel handle features a swaged end for inserting conduit to correct overbends Bright orange color handle is easy to spot on the jobsite (1)
  • Hole diameter is 0.265" (3)
  • Hole diameter is 0.39" (1)
  • Includes Combination Recess Hex Head Machine Screw and Square Nut (47)
  • Includes Combination Recess Hex Head Machine Screw and Square Nut, Pipe Range 0.701 to 0.875 in Od, Load Capacity 400 lb Vertical, 50 lb Transverse;Two Piece Construction (1)
  • Includes Combination Recess Hex Head Machine Screw and Square Nut, Pipe Range 1.125 To 1.375 In OD, Load Capacity 400 Lb Vertical, 50 Lb Transverse (2)
  • Includes Combination Recess Hex Head Machine Screw and Square Nut, Pipe Range 1.500 To 1.691 In OD, Load Capacity 400 Lb Vertical, 50 Lb Transverse (1)
  • Includes Combination Recess Hex Head Machine Screw and Square Nut, Pipe Range 1.500 to 1.691 in Od, Load Capacity 400 lb Vertical, 50 lb Transverse;Two Piece Construction (1)
  • Includes Combination Recess Hex Head Machine Screw and Square Nut, With 316 Stainless Steel Hardware (3)
  • Includes Combination Recess Hex Head Machine Screw and Square Nut;Two Piece Construction (1)
  • Includes Coupling (1)
  • Includes Cushion, Clamp, Screw and Nut, Dielectric Strength 400 Volts/Mil, 0.74 In Width X 1.49 In Height (1)
  • Includes ground screw with pigtail lead (3)
  • Includes Oil-Resistant Gasketing, Plated Stud, Wing Nut, Hole Diameter 0.88 In, Material ANSI 61 Polyester Powder Painted Steel (1)
  • Includes Oil-Resistant Gasketing, Plated Stud, Wing Nut, Hole Diameter 0.88 In, Material Unpainted Stainless Steel (1)
  • Includes Oil-Resistant Gasketing, Plated Stud, Wing Nut, Hole Diameter 1.06 In, Material Unpainted Stainless Steel (1)
  • Includes Oil-Resistant Gasketing, Plated Stud, Wing Nut, Hole Diameter 1.38 In, Material Unpainted Stainless Steel (1)
  • Includes Oil-Resistant Gasketing, Plated Stud, Wing Nut, Hole Diameter 1.69 In, Material Unpainted Stainless Steel (1)
  • Includes Oil-Resistant Gasketing, Plated Stud, Wing Nut, Hole Diameter 2.00 In, Material Unpainted Stainless Steel (1)
  • Includes Oil-Resistant Gasketing, Plated Stud, Wing Nut, Hole Diameter 2.50 In, Material Unpainted Stainless Steel (1)
  • Includes Retained Bolt and Thread Impression, Static Load Capacity 400 Lb, Mounting Hole Size 9/32 In (1)
  • Includes Setscrew and Locknut, Rod Size 3/8 In-16 TPI, Weight 41 Lb per 100 (1)
  • Increased Corrosion Resistance;Easy Installation using Ordinary Hand Tools;The Flat Back Design allows Extra Wiring Capacity (1)
  • Insulated Throat (1)
  • Insulated Throat Duplex Connector (1)
  • Interlocking design; Corrosion resistant; Cable tray installations per NEC; Environmental air-handling space installation NEC 300.22; UL Classified 1, 2 and 3-hour Through-Penetration Fire Systems UL File R14141 (1)
  • It will Change the direction of the conduit run and terminate the run into a box or enclosure (1)
  • Killark’s reducing bushings and adapters assist in reducing the trade size of tapped holes and its smooth internal bushing protects conductors. The wide variety of reducing ranges allow for almost any combination of size changes. It is available in copper-free aluminum and zinc plated steel. (7)
  • Kindorf Straps are Pre-Assembled for Easy Handling and Sorting (7)
  • Liquid Tight;Oil Tight;Rain Tight;Water Tight (6)
  • Low-profile, unobtrusive appearance. Blends with any décor or setting. ScuffCoat finish, tough, durable, scratch-resistant can be overpainted with latex paint. Fittings have removable covers which allow easy access to wiring for changes and additions. (2)
  • Made from 6063 alloy with a maximum Copper content of 0.1 PCT (4)
  • Made of Steel (2)
  • Maximum Flange Thickness 5/32 In (1)
  • NEC/CEC - Suitable for use in the following Hazardous Locations:Class I, Division 2 per NEC 501.10(B)(4) (3)
  • Neoprene (1)
  • Non-Insulated (3)
  • Oil-tempered spring steel for excellent fishing performance. Dirt-free tape finish keeps hands cleaner during use. Advanced comfort handle grip reduces fatigue. Superior rapid tape pay-out and rewind. Smaller Fish Eye with offset bend for improved fishing ability. Improved low profile tip for easy fishing through all sizes of conduit. Viewing Port gives visibility to remaining tape and ability to remove jobsite debris quickly. Rugged case design improves drop impact capability. Flared case with Grip Ridges (1)
  • One Piece Break Apart Strut Clamp for EMT and Rigid Conduit;Includes Thread Impression and Captured Screw (7)
  • One-piece, heavy-duty construction ready to install right out of the box, no need to break apart and reassemble, no screws or bolts to drop (7)
  • Patented TKO 1/2" & 3/4" eccentric knockouts (Per U.L. 514-A;suitable for use without a bonding jumper in circuits above or below 250 volts); combination cover screw heads provide for faster mudring/cover installation; raised ground provision in back of box (2)
  • Provides Protection in Wet Locations;Hex Surfaces on Gland Nut and Body;Sealing Gasket Effectively Seals Out Water, Oil, Dust and Dirt;Cupped Long Grounding Ferrule is Distortion-Free;Concrete Tight (7)
  • Redesigned BB38D Attaches 1/2" to 1" EMT or Flexible Conduit to Metal or Wood Studs;BB38 Attaches MC/AC Cable, 1/2" & 3/4" EMT to Metal or Wood Studs;Eliminates the Need for Offset Bending of Conduit;Aligns Conduit with Standard Box Knockouts;Box Depth 1-1/2 In;One Piece Construction (2)
  • Red-painted version available for quick and easy identification of life safety electrical systems (1)
  • Reduce the size of a knockout or slip hole in a sheet metal enclosure to a smaller trade size; Two reducing washers of the same size are required for each knockout; Knockout closures are used to close unused opening or knockout in sheet metal box, enclosure or cabinet (6)
  • Retrofit, Insulated Throat (1)
  • Safety Factor = 4 (2)
  • Simplifying Installation, Reducing Inventory and Labor Costs;NEMA 4 Rated (4)
  • Single-Channel Capacity;Male Connect (1)
  • SmoothStart pilot drill prevents carbide damage by gradually guiding cutter to material; Precision-ground carbide teeth for fast cutting of clean, round holes; Designed specifically for sheet metal cutting, even stainless-steel; Over drill flange built-in to prevent penetration beyond the sheet metal (2)
  • Snap Close Clip Pivots a Full 360°;Requires Only a Hammer to Install (3)
  • Stackable, 14/2, 14/3, 14/4, 12/2, 12/3, 12/4, 10 (1)
  • Standard NPT Threads for Easy Installation (1)
  • Standard Product (3)
  • Static Load Capacity 100 Lb (1)
  • Static Load Capacity 25 Lb (2)
  • Steel Backed Neoprene (2)
  • Straight Type (1)
  • ST-SR wire mesh strain relief with cap can be substituted for any related trade size ST Series cap to provide integral strain relief (2)
  • STUD CLIP,1/2 TO 3/4 CONDUIT TO METAL STUD (1)
  • suitable for EMT/Rigid/IMC (3)
  • Superior Protection, Strength, Safety and Ductility for your Most Demanding Wiring Job (10)
  • Supplied with 1/4IN nut and 1/4IN bolt (1)
  • TELESCOPING SCREW GUN BRACKET 16" TO 24" STUD SPAC (1)
  • Thread Protector Cap (1)
  • Threadless, Concretetight (5)
  • Twice the strap in half the time! Position the duplex conector over the 2 cables and set the screw. (1)
  • UL bonded strip 3/8in - 1.25in for grounding. UL Liquidtight all sizes. Sunlight resistant. Flame retardant PVD jacket. Hot dipped zinc galvanized steel low carbon steel core. (3)
  • UL Listed Raintight, No disassembly required, Concretetight (7)
  • Unique cover provides aesthetic recessed service (3)
  • Use with blower or vacuum power fishing system to pioneer the line through the conduit run. Flexible foam body for an air-tight seal. Color-coded end disk with embossed size marking for fast easy selection. Strong steel center rod with loops on both ends. Pistons available for all types and sizes of conduit 1/2" - 6". (9)
  • Used in Harsh Vibration Environment (1)
  • UV Coated Rust Resistance;Detachable Channel Cover Gives Tool-Less Wiring and Quick Installation (4)
  • Weight 104 Lb per 100 (2)
  • Weight 10Lb per 100 (1)
  • Weight 11 Lb per 100 (1)
  • Weight 115 Lb per 100 (1)
  • Weight 1160 Lb per 100 (1)
  • Weight 120 Lb per 100 (1)
  • Weight 143 Lb per 100 (1)
  • Weight 1547 Lb per 100 (1)
  • Weight 2099 Lb per 100 (1)
  • Weight 5 Lb per 100 (1)
  • Weight 6 Lb per 100 (1)
  • Weight 74 Lb per 100 (2)
  • Weight 84 Lb per 100 (2)
  • Weight 9 Lb per 100 (1)
  • Weight 99 Lb per 100 (1)
  • Wet and Damp Locations (1)
  • wet or dry locations, pregalvanized finish provides corrosion protection (8)
  • Wide Foot Pedal for Stability, Leverage and Comfort (1)
  • Widest cable ranges from 14/2 to 10/4 (1)
  • With 1/2 And 3/4 IN Concentric Conduit Knockouts, Four Gang (2)
  • With 1/2 And 3/4 IN Concentric Conduit Knockouts, Three Gang (1)
  • With Bolt (7)
  • With Bolt, Weight 6 Lb per 100 (2)
  • With Bolt, Weight 7 Lb per 100 (1)
  • With Bolt, Weight 8 Lb per 100 (1)
  • With Cover and Neoprene Gasket (5)
  • With Neoprene Integral Gasket (1)
  • With Neoprene Integral Gasket, Weight 190 Lb per 100 (1)
  • Show More...

• Includes

  

  • 34941 Ratchet wrench- 1 IN Hex, 721-1/2 1/2 IN Conduit SizePunch, 14722 1/2 IN Conduit Size Die, 721-3/4 3/4 IN Conduit Size Punch, 124AV 3/4 IN Conduit Size Die, 721-1 1 IN Conduit Size Punch, 126AV 1 IN Conduit Size Die, 721-1-1/4 1-1/4IN Conduit Size (1)
  • Cover and Gasket Set (1)
  • Cover;Gasket (1)
  • Handle 51427 (1)
  • Handle 51429 (1)
  • Punches, Dies and Draw Studs (1)
  • Romex/BX Conduit Connector (4)
  • Stainless Steel Fastening Screw (3)
  • Stainless Steel Screw;Nylon Washers and Gasket (4)
  • Show More...

• Thickness

  

  • 0.035" (1)
  • 0.04 in (1)
  • 0.112 in (2)
  • 0.14 INCH (1)
  • 11 ga (2)
  • 11 Gauge (1)
  • 12 ga (7)
  • 12 GAUGE (3)
  • 14 ga (13)
  • 14 ga;1.9 mm (1)
  • 14 GAUGE (2)
  • 16 (1)
  • 16 ga (1)
  • 16 ga;1.5 mm (1)
  • Beam Clamp 0.042 Conduit Clip 0.035 (1)
  • Show More...

• Connection Size

  

  • 2 in (1)
  • 3/4 in (1)
  • Show More...

• Application

  

  • 600 V and lower circuits. (1)
  • AC/MC/HCF/MCI-A/AC90/ACG90/Flex/MC-PCS (4)
  • Armored Cable and Flexible Metal Conduit (1)
  • Assembles like a regular EMT/RIGID/IMC set screw coupling. To install, simply slide coupling end stop onto fixed end of EMT/RIGID/IMC and tighten screw. Place movable EMT/RIGID/IMC completely into coupling and mark engagement, remove EMT/RIGID/IMC and mark half the distance of engagement, reinstall EMT/RIGID/IMC to half distance. (2)
  • Assembles like a regular EMT/RIGID/IMC set screw coupling. To install, simply slide coupling end stop onto fixed end of EMT/RIGID/IMC and tighten screw. Place movable EMT/RIGID/IMC completely into coupling and mark engagement, remove EMT/RIGID/IMC and mark half the distance of engagement, reinstall EMT/RIGID/IMC to half distance. (1)
  • Attaches a full range of EMT, Rigid conduit and cable to strut channels (7)
  • Ball type Swivel fixture covers are suitable for mounting pendant or fluorescent lighting fixtures to ceiling box. Maximum 20 degree swing from vertical and 50lb. load. (1)
  • Commercial (14)
  • Commercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - Other (105)
  • Commercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherCommercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - Aftermarket (10)
  • Commercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherCommercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - AftermarketCommercial / Institutional Buildings / Structures - Lighting and Lighting Controls (1)
  • Commercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherData Intensive Industries and Information Technologies - Communications and Telecom (2)
  • Commercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherInd Facilities & Factories - Facility: Power Distribution and ControlInd Facilities & Factories - Facility: Automation and MonitoringInd Facilities & Factories - Industrial Facilities/Factories - OtherUtility - Substations, Utility Transmission and DistributionCommercial / Institutional Buildings / Structures - Power Distribution and ControlsCommercial / Institutional Buildings / Structures - Lighti (1)
  • Commercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - AftermarketCommercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - Other (5)
  • Commercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - AftermarketCommercial / Institutional Buildings / Structures - Lighting and Lighting ControlsCommercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - Other (2)
  • Commercial / Institutional Buildings / Structures - Lighting and Lighting ControlsCommercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherCommercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - Aftermarket (1)
  • Commercial / Institutional Buildings / Structures - Lighting and Lighting ControlsInd Facilities & Factories - Facility: Critical PowerInd Facilities & Factories - Industrial Facilities/Factories - OtherInd Facilities & Factories - Mfg. Process Electrification and ControlInd Facilities & Factories - Facility: Automation and MonitoringInd Facilities & Factories - Facility: Lighting and Lighting ControlsCommercial / Institutional Buildings / Structures - Power Distribution and ControlsCommercial / Institutio (1)
  • Commercial / Institutional Buildings / Structures - Power Distribution and ControlsInd Facilities & Factories - Facility: Power Distribution and ControlCommercial / Institutional Buildings / Structures - Lighting and Lighting ControlsInd Facilities & Factories - Facility: Lighting and Lighting ControlsInd Facilities & Factories - Industrial Facilities/Factories - OtherInd Facilities & Factories - Mfg. Process Electrification and ControlUtility - Substations, Utility Transmission and DistributionInd Facilit (1)
  • Commercial;Industrial;Dry Location (1)
  • Commercial;Industrial;Institutional;Multi-Residential Buildings (5)
  • Commercial;Industrial;Residential;Wet/Hazardous Location (7)
  • Conduit (1)
  • Connecting Raceway to Conduit. Break Out Crescent Twistout to Use With V700 (1)
  • Corrosion Protection for Electrical Systems (4)
  • Damp Location (1)
  • Damp Locations;Wet Locations (4)
  • Datacenters - IT Space: Enterprise / Server Room / Network ClosetResidential Bldgs & Facilities - Residential Bldgs & Facilities - OtherGeneration - Renewable Energy - Alternative EnergyUtilityWater and Wastewater Systems - Water and Wastewater Systems - OtherCommercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - AftermarketInd Facilities & Factories - Industrial Facilities/Factories - OtherDatacenters - Datacenters - OtherOther IT and Datacom - Other InfrastructuresCommercial (1)
  • Datacom and Low Voltage; Electrical Fixing and Fastening (6)
  • Datacom and Low Voltage; HVAC, Plumbing and Refrigeration; Electrical Fixing and Fastening (4)
  • Datacom and Low Voltage;Electrical (5)
  • Datacom and Low Voltage;Electrical;HVAC;Plumbing and Refrigeration (7)
  • Designed to secure rigid metal conduit, IMC or EMT across, parallel or perpendicular to channel, beam, and angle supports. (1)
  • Electrical (7)
  • Electrical Conduit (1)
  • Electrical Conduit/Cable (1)
  • Electrical Fixing and Fastening; Datacom and Low Voltage (3)
  • Electrical Fixing and Fastening; Datacom and Low Voltage; HVAC, Plumbing and Refrigeration (3)
  • Electrical Fixing and Fastening; HVAC, Plumbing and Refrigeration; Datacom and Low Voltage (6)
  • Electrical Installation, Conduit Supporting (1)
  • Electrical Raceway System (10)
  • Elevator;Escalator;Hoistway;Electric Sign;Hazardous Location (7)
  • EMT Raceway;Wet Locations (6)
  • Fasteners;Beam Fasteners;MC/AC Cable;1/2 In and 3/4 In EMT to Metal/Wood Studs (1)
  • Fasteners;Conduit Fasteners (1)
  • Fasteners;Stud/Box Fasteners;1/2 In to 1 In Emt/Flexible Conduit to Metal/Wood Studs (1)
  • Fittings are to be used with PolyTuff® I and PolyTuff® II (3)
  • Fluorescent Lay-In Fixture;Incandescent Fixture (1)
  • For 1 IN Conduit Pipe (1)
  • For 3/4 IN Conduit Pipe (1)
  • For AC - MCI-A - HCF steel and aluminum cable (3)
  • For conduits and cables (2)
  • For Electrical Power, Control And Communication Cables, Motor Leads, Listed Assemblies, Listed Wire Fixtures, Manufactured Wiring Systems (1)
  • For EMT or Rigid (1)
  • For Excellent Fishing Performance (1)
  • For Flex, AC and MC Cables (1)
  • For FM7 Unilet Conduit Outlet Bodies (3)
  • For Form 35 Unilet Conduit Outlet Bodies (3)
  • For Hickeys (2)
  • For Joining Lengths Of Steel EMT To Rigid Metal Conduit Or IMC (5)
  • For Liquidtight Flexible Metal Conduit (2)
  • For Mounting Pipe or Conduit Parallel to the Beam (1)
  • For punching conduit sized holes in mild steel, aluminum, fiberglass, and plastic. (6)
  • For punching holes in mild steel, aluminum, brass, copper, fiberglass and plastics (2)
  • For Rigid And EMT Conduit (1)
  • For Rigid And IMC Conduits (1)
  • For Rigid Conduit (4)
  • For Service Entrance Wiring Upto 6 FT (3)
  • For use in fire alarm systems (1)
  • For use in wet or dry locations to support runs of rigid/IMC and EMT conduit from ceilings and walls (8)
  • For Use To Connect Conduit To Enclosure At 90 DEG Angle (1)
  • For use with 0.50 inch FM7 conduit bodies. Seals and protects. (1)
  • For use with 3/8 inch, 1/2 inch & 5/8 inch wall board and plaster (3)
  • For use with 4 inch square boxes (1)
  • For use with 664 SC and 664 CI floor boxes (2)
  • For use with 68 P round floor box (3)
  • For use with conduit (19)
  • For use with conduit or pipe (5)
  • For use with Duraloy 7 Series fittings. (5)
  • For use with EMT and Rigid conduit or pipe (10)
  • For use with EMT conduit (16)
  • For use with Liquidtight Metal conduit and PolyTuff I Non-Metallic conduit (3)
  • For use with non-metallic sheathed cable (1)
  • For use with Rigid Conduit and Pipe (6)
  • For Use With Rigid Steel, Rigid Aluminum Conduit And IMC (7)
  • For Use With Rigid Steel, Rigid Aluminum Conduit, IMC And EMT (6)
  • For use with rigid/IMC conduit (2)
  • For Use with Rigid/IMC Conduits (9)
  • For use with service entrance fittings (1)
  • For use with the conduits (3)
  • For Use With Threaded Rigid Metal Conduit and IMC (1)
  • For Used To Cover Aluminum Conduit Body Opening (4)
  • For Used To Reduce The Size Of A Knockout Or Slip Hole (6)
  • For Used To Seal Up Holes Punched In Panels Or Knockouts From Outlet Boxes (2)
  • For Used To Secure Rigid Metal Conduit, IMC Or EMT To Threaded Rod, Supports Or Direct To Mounting Surface (1)
  • Generation - Renewable Energy - Alternative EnergyCommercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherGeneration - Conventional Energy - Conventional EnergyUtilityOther IT and Datacom - Other InfrastructuresDatacenters - Datacenters - OtherInd Facilities & Factories - Industrial Facilities/Factories - OtherInd Facilities & Factories - Facility - OtherDatacenters - IT Space: Enterprise / Server Room / Network ClosetCommercial / Institutional Buildings (1)
  • Generation - Renewable Energy - Alternative EnergyCommercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - AftermarketGeneration - Conventional Energy - Conventional EnergyDatacenters - Datacenters - OtherOther IT and Datacom - Other InfrastructuresWater and Wastewater Systems - Water and Wastewater Systems - OtherCommercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherDatacenters - IT Space: Enterprise / Server Room / Network (1)
  • Grounded Electrical Wiring System (9)
  • Grounding Wire (7)
  • Hazardous Location (3)
  • Hazardous Location;Acoustical;Ceiling and Partitioning;Electrical (1)
  • High Strength Steel Handle Features a Swaged End for Inserting Conduit to Correct Overbends Bright Orange Color Handle is Easy to Spot on The Jobsite (1)
  • HVAC, Plumbing and Refrigeration; Electrical Fixing and Fastening; Datacom and Low Voltage (4)
  • Ind Facilities & Factories - Facility - OtherCommercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - AftermarketDatacenters - IT Space: Enterprise / Server Room / Network ClosetInd Facilities & Factories - Industrial Facilities/Factories - OtherCommercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherWater and Wastewater Systems - Water and Wastewater Systems - OtherOther IT and Datacom - Other InfrastructuresGeneration - Conv (1)
  • Ind Facilities & Factories - Facility - OtherGeneration - Conventional Energy - Conventional EnergyResidential Bldgs & Facilities - Residential Bldgs & Facilities - OtherWater and Wastewater Systems - Water and Wastewater Systems - OtherDatacenters - IT Space: Enterprise / Server Room / Network ClosetUtilityCommercial / Institutional Buildings / Structures - Commercial/Inst Bldg Strctures - AftermarketGeneration - Renewable Energy - Alternative EnergyInd Facilities & Factories - Industrial Facilities/Facto (1)
  • Ind Facilities & Factories - Facility: Automation and MonitoringCommercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherInd Facilities & Factories - Facility: Lighting and Lighting ControlsInd Facilities & Factories - Industrial Facilities/Factories - OtherCommercial / Institutional Buildings / Structures - Lighting and Lighting ControlsCommercial / Institutional Buildings / Structures - Power Distribution and ControlsUtility - Substations, Utility Trans (1)
  • Ind Facilities & Factories - Facility: Critical PowerInd Facilities & Factories - Industrial Facilities/Factories - OtherCommercial / Institutional Buildings / Structures - Lighting and Lighting ControlsUtility - Substations, Utility Transmission and DistributionCommercial / Institutional Buildings / Structures - Power Distribution and ControlsInd Facilities & Factories - Facility: Power Distribution and ControlInd Facilities & Factories - Facility: Automation and MonitoringInd Facilities & Factories - Mfg (1)
  • Ind Facilities & Factories - Facility: Critical PowerInd Facilities & Factories - Mfg. Process Electrification and ControlCommercial / Institutional Buildings / Structures - Lighting and Lighting ControlsCommercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - OtherInd Facilities & Factories - Facility: Automation and MonitoringInd Facilities & Factories - Industrial Facilities/Factories - OtherUtility - Substations, Utility Transmission and DistributionCommer (1)
  • Ind Facilities & Factories - Industrial Facilities/Factories - Other (13)
  • Ind Facilities & Factories - Industrial Facilities/Factories - OtherUtility - Substations, Utility Transmission and DistributionInd Facilities & Factories - Facility: Lighting and Lighting ControlsInd Facilities & Factories - Facility: Power Distribution and ControlInd Facilities & Factories - Facility: Critical PowerCommercial / Institutional Buildings / Structures - Lighting and Lighting ControlsCommercial / Institutional Buildings / Structures - Power Distribution and ControlsCommercial / Institutional (1)
  • Industrial;Commercial;Conveyor;Blower;Crane;Air Conditioner;Machine Tooling;Lubricating Equipment (5)
  • INSTALLED INDOORS OR OUTDOORS, EXPOSED OR CONSEALED (4)
  • Liquid Tight Conduit (1)
  • Magnetic Combination Square and Conduit Layout Template (1)
  • Mechanical Damage and Corrosive Attack;Electrical Continuity is Maintained Across Assemble (1)
  • Mechanical Damage and Corrosive Attack;Electrical Continuity is Maintained Across Assembled Joint (5)
  • N (1)
  • Non-Metallic Sheathed Cable (1)
  • Petrochemical Refining and Processing (1)
  • PROVIDES CORROSION PROTECTION FROM HARSH ENVIRONMENTS (1)
  • Provides flush service for power, communications and data (1)
  • Provides Positive Seal Against Water and Oil (1)
  • Provides positive seal between shoulder of connector and sheet metal enclosure. Used with 0.50 inch connector. (1)
  • Provides positive seal between shoulder of connector and sheet metal enclosure. Used with 0.75 inch connector. (1)
  • Residential/Commercial (1)
  • Retail Display, Gondolas, Cove and Under Cabinet (4)
  • Rigid/IMC/PVC Conduit (1)
  • Stationary Mach Equip In Factory - RoboticsElec Assemblies, Panels & EOEM - Electrical Assemblies, Panels and EOEMsElec Assemblies, Panels & EOEM - Elec Assemblies/Panels/EOEMs - AftermarketElec Assemblies, Panels & EOEM - Control Panels for MachinesElec Assemblies, Panels & EOEM - Panel BuildersInd Facilities & Factories - Facility: Power Distribution and ControlElec Assemblies, Panels & EOEM - Electrical Assemblies and EOEMs - Other (4)
  • Strut System (3)
  • Stub UPS;Offsets;Back-To-Back Saddle Bends and Other Bends (1)
  • Superstruct(R) Metal Framing System (1)
  • Superstrut Pipe Straps are Designed to be Twist Inserted Anywhere Along the Slot Side of the Channel (35)
  • Supporting 2 runs of AC/MC/FMC. Accomodates Steel and Aluminum AC/MC/FMC/MCIA with an outer diameter of 0.425 (14/2) to 0.61 (10/3) inches FMC in 3/8" trade size. Patented (1)
  • To Attach the Conduit Run at a 90 Degree Angle to a Beam or Structural Member (2)
  • To Change Direction for Threaded, Rigid Conduit or When Terminating at a Box or Fitting (1)
  • To Connect Externally Threaded Conduit or Connector to a Threadless Opening In a Box or Enclosure (1)
  • To Couple and Effectively Bond Threaded Ends of Rigid Metal Conduit/Intermediate Conduit Where Neither Length of Conduit Can Be Roated (3)
  • To Couple and Effectively Bond Threaded Ends of Rigid Metal Conduit/Intermediate Conduit Where Neither Length of Conduit Can Be Rotated (2)
  • To ground and secure EMT raceway sections together in wet locations (7)
  • To ground and secure EMT Raceways sections together (6)
  • To ground and secure EMT Raceways to boxes and enclosures in wet locations (4)
  • To Help Connector Conduit and Cable Fittings to Larger Knockouts (2)
  • To positively bond conduit to box or enclosure (3)
  • To reduce the trade size of a taped hole or hub. (7)
  • To secure EMT or rigid conduit to threaded rod, insulator supports, or directly to mounting surface. (4)
  • To secure EMT or rigid conduit to threaded rod, insulator supports, or directly to mounting surface. With Carriage Bolt and Nut. (2)
  • To secure EMT or rigid conduit to threaded rod, insulator supports, or directly to mounting surface. With Carriage Bolt and Nut. (1)
  • To Secure EMT or Rigid Conduit to Threaded Rod. Insulator Supports or Directly to Mounting Surface. Strap Has Integral Threads (1)
  • To secure pipes, tubes and hoses for fluid conductors (1)
  • Trace Fire Alarm;Health Care Dedicated Circuits;Data Transmission;Communications Wiring;Computer Power Circuits and any other Designated System (7)
  • UL1660 (1)
  • Under-Ground Electrical (1)
  • Use with blower or vacuum power fishing system to start conduit run. (9)
  • Used at any point along the slot side of the channel and are inserted into the two channel returns. Designed for use in standard 1-5/8 channels. Supplied with stainless nut and bolt. (2)
  • Used for Supporting Conduit (1)
  • Used in extremely high temperature applications such as commercial ovens and refrigeration, industrial furnaces and foundries (4)
  • Used in Harsh Vibration Environments to Fasten Threaded Conduit to Unthreaded Opening in a Box or Enclosure (1)
  • Used to fasten threaded conduit to unthreaded opening in a box or enclosure. (1)
  • Used to fasten threaded Rigid or IMC Conduit to box or enclosure. (12)
  • USED TO HANG CONDUIT (1)
  • Used to join two lengths of EMT, Rigid and IMC. Concrete tight when taped. (4)
  • Used to join two lengths of EMT. Concrete tight when taped. (4)
  • Used to join two lengths of EMT. Concrete-tight. (9)
  • Used to support oval types SE and SEU cable to mounting surface. (1)
  • Utility - Substations, Utility Transmission and DistributionCommercial / Institutional Buildings / Structures - Lighting and Lighting ControlsCommercial / Institutional Buildings / Structures - Power Distribution and ControlsInd Facilities & Factories - Facility: Power Distribution and ControlInd Facilities & Factories - Facility: Automation and MonitoringInd Facilities & Factories - Mfg. Process Electrification and ControlInd Facilities & Factories - Facility: Lighting and Lighting ControlsInd Facilities (1)
  • Wet Location;Food & Beverage Production;Marine & Coastal Facilities;Chemical Plants;Water & Wastewater Treatment;Pharmaceuticals & Cosmetics;Refining & Extraction Sites;Petrochemical Operations;Pulp & Paper Mills;Along with other corrosive environments (1)
  • Wire Pulling (2)
  • Show More...

• Throat Type

  

  • INSULATED (1)
  • Insulated Male (1)
  • Show More...

• Connection Type

  

  • Set Screw (4)
  • Straight (1)
  • Threaded (9)
  • Show More...

• Size

  

  • 0.5 (1)
  • 1 (7)
  • 1 1/2 (1)
  • 1 1/4 (1)
  • 1 in (15)
  • 1 In (EMT/Rigid) (1)
  • 1 In (Rigid/EMT) (1)
  • 1 In Conduit (2)
  • 1 INCH (5)
  • 1 PH (2)
  • 1" (1)
  • 1.22 In Diameter (1)
  • 1.25 (1)
  • 1.27 Inch Width x 1.73 Inch Height (1)
  • 1.38 In Diameter (1)
  • 1.46 Inch Height (3)
  • 1.46 Inch Width x 1.48 Inch Height (1)
  • 1.5 (1)
  • 1.56 In Diameter (1)
  • 1.64 Inch Height (2)
  • 1.64 Inch Width (2)
  • 1.67 Inch Height (3)
  • 1.73 Inch Height (2)
  • 1.79 Inch Height (3)
  • 1.8125 X 2.5 X 3.75 (1)
  • 1.8125 X 3.5 X 3.75 (1)
  • 1.83 Inch Height (3)
  • 1.83 Inch Width (3)
  • 1.83 Inch Width x 1.98 Inch Height (1)
  • 1.88 In Diameter (1)
  • 1.98 Inch Height (2)
  • 1/2 (5)
  • 1/2 in (14)
  • 1/2 In (EMT/Rigid) (1)
  • 1/2 In (OD), 3/8 In (Copper Tube) (1)
  • 1/2 In, 3/4 In Conduit (3)
  • 1/2 in;15 mm (1)
  • 1/2 INCH (5)
  • 1/2 inch rigid conduit (1)
  • 1/2" - 1-1/4" conduit size knockouts (hole size: 0.89" - 1.70" or 22.5 mm - 43.2 mm) (1)
  • 10.67 Inch Length x 2.79 Inch Width x 4.07 Inch Height (1)
  • 10-7/16 Inches Length x 4-1/2 Inches Width x 1-5/8 Inches Depth (1)
  • 10-7/16 Inches Length x 4-1/2 Inches Width x 2-1/2 Inches Depth (1)
  • 1-1/2 (2)
  • 1-1/2 in (9)
  • 1-1/2 in (Box Depth) (1)
  • 1-1/2 IN Rating (3)
  • 1-1/2 INCH (4)
  • 1-1/2 Inches (1)
  • 1-1/4 in (12)
  • 1-1/4 In Conduit (2)
  • 1-1/4 IN Rating (2)
  • 1-1/4 in;32 mm (1)
  • 1-1/4 INCH (1)
  • 1-1/4 Inches (3)
  • 2 (8)
  • 2 1/2 (2)
  • 2 A (3)
  • 2 in (12)
  • 2 In Width X 1-1/2 In Depth X 3 In Height (1)
  • 2 In Width X 2 In Depth X 3 In Height (1)
  • 2 In Width X 2-1/2 In Depth X 3 In Height (1)
  • 2 In Width X 3-1/2 In Depth X 3 In Height (2)
  • 2 INCH (1)
  • 2 Inches (2)
  • 2 X 2 X 3 (1)
  • 2.04 Inch Height (4)
  • 2.063 in x 0.875 in x 1.063 in (1)
  • 2.08 Inch Width (1)
  • 2.188 in x 4.000 in x 4.000 in (1)
  • 2.19 In Diameter (1)
  • 2.27 Inch Height (1)
  • 2.27 Inch Width (3)
  • 2.27 Inch Width x 2.35 Inch Height (1)
  • 2.29 Inch Height (1)
  • 2.35 Inch Height (2)
  • 2.37 x 1.75 x 1.46 (1)
  • 2.438 in x 0.875 in x 1.203 in (1)
  • 2.5 Inch Diameter x 2.66 Inch Height (1)
  • 2.50 In Diameter (1)
  • 2.52 Inch Height (1)
  • 2.52 Inch Width (1)
  • 2.6 Inch Height (3)
  • 2.82 Inch Height (4)
  • 2.83 Inch Height (2)
  • 2.83 Inch Width (1)
  • 2.83 Inch Width x 2.82 Inch Height (1)
  • 2.844 in x 0.845 in x 1.375 in (1)
  • 2.875 in x 0.875 in x 1.594 in (1)
  • 2-1/2 (4)
  • 2-1/2 in (4)
  • 2-1/2 Inches (1)
  • 2-1/8 in (Box Depth) (1)
  • 3 (6)
  • 3 1/2 (1)
  • 3 in (10)
  • 3 INCH (1)
  • 3 Inches (3)
  • 3 Inches Height x 2 Inches Width x 2-3/4 inches depth (3)
  • 3 Inches Height x 2 Inches Width x 3-1/2 inches depth (1)
  • 3.00 In Diameter (1)
  • 3.08 Inch Height (1)
  • 3.08 Inch Width (1)
  • 3.17 Inch Height (1)
  • 3.6 Inch Height (4)
  • 3.625 X 3.5 X 3.75 (1)
  • 3.83 Inch Height (2)
  • 3.83 Inch Width (1)
  • 3.83 Inch Width x 3.6 Inch Height (1)
  • 3.875 in x 1.25 in x 2.344 in (1)
  • 3/4 (6)
  • 3/4 in (17)
  • 3/4 In (Rigid/EMT) (2)
  • 3/4 INCH (8)
  • 3/4 Rigid, 3/4 EMT (1)
  • 3/4" (1)
  • 3/8 (1)
  • 3/8 in (1)
  • 3/8 In Conduit (1)
  • 3/8 In, 1/2 In (Rigid), 1/2 In (EMT) (1)
  • 3-1/2 (1)
  • 3-1/2 in (5)
  • 3-1/2 Inches Diameter x 1-1/2 Inch depth (2)
  • 3-1/4 Inches Diameter x 1/2 Inch depth (1)
  • 3-3/4 Inches Length x 1-7/8 Inches Width x 3-1/2 Inches Depth (1)
  • 3-3/4 Inches Length x 3-3/4 Inches Width x 2-1/2 Inches Depth (1)
  • 3-3/4 Inches Length x 3-3/4 Inches Width x 3-1/2 Inches Depth (1)
  • 3-3/4 Inches Length x 5-9/16 Inches Width x 3-1/2 Inches Depth (1)
  • 3-3/4 Inches Length x 7-3/8 Inches Width x 3-1/2 Inches Depth (1)
  • 4 (6)
  • 4 in (7)
  • 4 IN Pipe (1)
  • 4 Inches (3)
  • 4 Inches Diameter x 2-1/8 Inches depth (1)
  • 4.130" x 1.000" x 0.750" (1)
  • 4.25 Inch Diameter x 3.75 Inch Length (1)
  • 4.437 in x 1.25 in x 3.12 in (1)
  • 4-11/16 (3)
  • 4-11/16 Inches Length x 4-11/16 Inches Width x 2-1/8 Inches Depth (1)
  • 5 (2)
  • 5 in (2)
  • 5 in x 1.25 in x 3.87 in (1)
  • 5.4375 X 2.5 X 3.75 (1)
  • 5.4375 X 3.5 X 3.75 (1)
  • 5.98 INCH L X 2.48 INCH W X 1.67 INCH H (1)
  • 6 (1)
  • 6 In (1)
  • 6 Inches (1)
  • 7 in x 1.75 in x 5.12 in (1)
  • 7.375 X 2.5 X 3.75 (1)
  • 7.375 X 3.5 X 3.75 (1)
  • 798 (3)
  • 8-5/8 Inches Length x 4-1/2 Inches Width x 2-1/2 Inches Depth (1)
  • Commercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - Other (3)
  • L(0.750) x W(1.345) x H(0.375) (1)
  • L(1.390) x W(1.000) x H(1.000) (1)
  • L(1.473) x W(1.179) x H(0.840) (1)
  • L(2.075) x W(1.252) x H(1.000) (1)
  • L(2.190) x W(1.135) x H(1.409) (1)
  • L(2.388) x W(2.035) x H(0.950) (1)
  • L(2.496) x W(1.709) x H(1.300) (1)
  • L(2.890) x W(2.890) x H(0.250) (1)
  • L(3.054) x W(2.717) x H(1.200) (1)
  • L(3.055) x W(2.752) x H(1.135) (1)
  • L(4.311) x W(4.311) x H(1.230) (1)
  • L(5.180) x W(1.250) x H(1.160) (1)
  • Length from 10-1/2 Inches to 18-1/2 Inches (1)
  • Length from 14-1/2 Inches to 26-1/2 Inches (2)
  • Sizes are specific to each product. (1)
  • Show More...

• Thread Length

  

  • 1.5 INCH (1)
  • 1.75 INCH (2)
  • Show More...

• Package Quantity

  

  • 1 ct (2)
  • 1 CT;10 PK (2)
  • 1 CT;100 PK (3)
  • 1 CT;50 Pk (1)
  • 1 CT;6 Pk (4)
  • 1 ft (1)
  • 1 PK;100 CT (2)
  • 1 PK;2 CT (1)
  • 1 PK;20 CT (2)
  • 1 PK;5 CT (3)
  • 10 BX;50 CT (1)
  • 10 CT (23)
  • 10 CT;60 PK (1)
  • 10 PK;1 CT (2)
  • 10 PK;2 CT (3)
  • 100 BX (13)
  • 100 CT (16)
  • 100 CX (1)
  • 100 PK (15)
  • 100 PK;1 CT (1)
  • 100 PK;10 CT (1)
  • 1000 PK (2)
  • 1270 PK;10 CT (1)
  • 15 CT (1)
  • 15 CT;19 PK (1)
  • 2 CT (2)
  • 2 PK;1 CT (1)
  • 20 CT (1)
  • 20 PK;1 CT (1)
  • 200 PK;20 CT (2)
  • 2170 PK;10 CT (1)
  • 25 BX (1)
  • 25 CT (15)
  • 25 CT;100 PK (1)
  • 25 CT;250 PK (1)
  • 25 CT;50 PK (1)
  • 25 PK (6)
  • 25 PK;1 CT (6)
  • 250 PK (1)
  • 30 CT (4)
  • 330 PK;10 CT (1)
  • 5 CT (4)
  • 5 CT;100 PK (1)
  • 5 CT;30 PK (1)
  • 5 PK (1)
  • 5 PK;1 CT (1)
  • 50 CT (21)
  • 50 CT;1 PK (1)
  • 50 CT;200 PK (2)
  • 50 CX (1)
  • 50 PK (6)
  • 50 PK;1 CT (2)
  • 500 PK (1)
  • 6 PK (2)
  • 6 PK;1 CT (1)
  • 610 PK;10 CT (1)
  • 900 PK;10 CT (1)
  • 910 PK;10 CT (1)
  • Show More...

• Hole Size

  

  • 1-1/8 (1)
  • 1-3/8 (1)
  • Show More...

• Weight

  

  • 0.001 lb/EA (1)
  • 0.01 lb (1)
  • 0.01 lb/EA (1)
  • 0.02 lb/EA (1)
  • 0.0204 lb/EA (1)
  • 0.03 lb (2)
  • 0.04 lb/EA (2)
  • 0.05 lb (1)
  • 0.05 lb/EA (1)
  • 0.053 lb (1)
  • 0.06 lb (4)
  • 0.06 lb/EA (1)
  • 0.07 lb (4)
  • 0.078 lb/EA (1)
  • 0.08 (1)
  • 0.08 lb (1)
  • 0.08 lb/EA (1)
  • 0.09 (1)
  • 0.09 lb (4)
  • 0.0900 lb (1)
  • 0.0954 (1)
  • 0.1 lb (2)
  • 0.1000 lb (1)
  • 0.13 lb/EA (1)
  • 0.14 lb/EA (3)
  • 0.15 (2)
  • 0.152 lb/EA (1)
  • 0.1598 (2)
  • 0.16 (1)
  • 0.18 lb/EA (2)
  • 0.1832 (1)
  • 0.193 lb/EA (1)
  • 0.2 (1)
  • 0.2 lb/EA (1)
  • 0.21 lb/EA (1)
  • 0.2329 (1)
  • 0.256 (1)
  • 0.2689 lb/EA (1)
  • 0.29 lb/EA (1)
  • 0.296 lb/EA (1)
  • 0.3 (1)
  • 0.30 (2)
  • 0.304 lb/EA (1)
  • 0.31 (1)
  • 0.31 lb (1)
  • 0.32 lb (1)
  • 0.355 lb/EA (1)
  • 0.38 (1)
  • 0.39 (1)
  • 0.4 (1)
  • 0.4217 lb/EA (1)
  • 0.434 (1)
  • 0.45 lb/ft (1)
  • 0.46 lb/EA (1)
  • 0.48 lb/EA (2)
  • 0.50 (2)
  • 0.51 (1)
  • 0.55 lb/EA (1)
  • 0.5717 lb/EA (1)
  • 0.6 (1)
  • 0.6 lb/EA (1)
  • 0.6 lb/ft (1)
  • 0.61 (1)
  • 0.69 lb/EA (1)
  • 0.73 lb/EA (1)
  • 0.8 lb/ft (1)
  • 0.82 (1)
  • 0.82 lb/ft (1)
  • 0.90 (2)
  • 0.96 lb/ft (1)
  • 0.97 (1)
  • 0.98 (1)
  • 1 (1)
  • 1.00 (1)
  • 1.06 lb/ft;0.48 kg/ft (1)
  • 1.075 lb/ft (1)
  • 1.09 (1)
  • 1.09 lb/100 ft (1)
  • 1.10 (2)
  • 1.11 lb/ft (1)
  • 1.15 (1)
  • 1.1599 lb/ft (1)
  • 1.23 (1)
  • 1.25 (1)
  • 1.25 lb (1)
  • 1.33 (1)
  • 1.399 lb/ft (1)
  • 1.40 (2)
  • 1.46 (1)
  • 1.5 lb/ft (1)
  • 1.55 (2)
  • 1.6 lb (0.7 kg) (1)
  • 1.61 (1)
  • 1.65 lb/ft (1)
  • 1.75 (1)
  • 1.82 lb/ft (1)
  • 1.95 (1)
  • 10 (1)
  • 10 lb (1)
  • 10 lb;4.54 kg (1)
  • 10.08 (1)
  • 10.3 lb/ft (1)
  • 10.6 (1)
  • 102 (1)
  • 103.516 (2)
  • 104 lb/mft (1)
  • 104.00 lb;47.17 kg (1)
  • 11 lb;5 kg (1)
  • 11.63 lb/100 (1)
  • 112 lb/100 ft (1)
  • 112 Pound per 100 Foot (1)
  • 113 lb/100 ft (1)
  • 12.38 lb/100 (1)
  • 12.5 lb/100 (3)
  • 121.3 lb/100 (1)
  • 128.86 (1)
  • 129 lb/mft (1)
  • 133 lb/100 ft (1)
  • 14.4 oz ( 408 g) (1)
  • 14.5 lb/100 (1)
  • 142 lb/mft (6)
  • 142.138 (2)
  • 145 (1)
  • 149.00 lb;67.59 kg (1)
  • 149.707 (3)
  • 15 lb;6.8 kg (1)
  • 15.38 lb/100 (1)
  • 15.40 (1)
  • 15.5 lb/100 (1)
  • 150 lb/mft (1)
  • 151.802 (1)
  • 16.60 (1)
  • 16.68 (2)
  • 164 lb/100 ft (1)
  • 164 Pound per 100 Foot (1)
  • 170.241 (1)
  • 172 lb/mft (2)
  • 178.191 (1)
  • 18 lb/100 (1)
  • 189 lb/mft (1)
  • 19 (1)
  • 190 lb/100 ft (1)
  • 2.04 (1)
  • 2.05 (1)
  • 2.11 lb/EA (1)
  • 2.15 lb/ft (1)
  • 2.17 (1)
  • 2.18 (2)
  • 2.19 (1)
  • 2.33 (2)
  • 2.40 (2)
  • 2.4199 lb/ft (1)
  • 2.46 (1)
  • 2.47 (1)
  • 2.58 lb/ft (1)
  • 2.5999 lb/ft (1)
  • 2.67 (1)
  • 2.79 (1)
  • 2.88 (1)
  • 201 lb/mft (1)
  • 217 Pound per 100 Foot (2)
  • 219.224 (1)
  • 25 lb/100 (2)
  • 25.00 lb;11.34 kg (1)
  • 25.879 (2)
  • 268 lb/100 ft (1)
  • 268 Pound per 100 Foot (1)
  • 27 lb/100 ft (1)
  • 27.1 lb/100 (1)
  • 27.403 (2)
  • 27.5 lb/100 (2)
  • 280 lb/100 (1)
  • 281 Pound per 100 Foot (1)
  • 29.94 lb/100;66 kg/100 (1)
  • 3.21 (1)
  • 3.25 lb/ft (1)
  • 3.3 (1)
  • 3.50 (1)
  • 3.52 lb/ft (1)
  • 3.54 (1)
  • 3.64 (1)
  • 3.9 lb/ft (1)
  • 30 lb/100 ft (1)
  • 30.19 lb/100 (2)
  • 32 (1)
  • 32.215 (4)
  • 32.38 (1)
  • 33.50 (1)
  • 35 lb/100 ft (1)
  • 35.5345 (1)
  • 350.00 lb;158.76 kg (1)
  • 358 lb/100 ft (1)
  • 358 Pound per 100 Foot (1)
  • 37.5 lb/100 (2)
  • 376 Pound per 100 Foot (1)
  • 38 lb/100 ft (1)
  • 38.63325 (2)
  • 39.00 lb;17.69 kg (1)
  • 39.01 lb/100;86 kg/100 (1)
  • 39.63 lb/100 (1)
  • 39.7 lb/100 (1)
  • 4.2799 lb/ft (1)
  • 4.73 (1)
  • 4.81 (1)
  • 4.90 (2)
  • 42.54625 (1)
  • 44.1 lb/100 (1)
  • 44.30 lb;20.09 Kg (1)
  • 44.98375 (1)
  • 456.4 lb/100 (1)
  • 5.20 (2)
  • 5.26 lb/ft (1)
  • 5.41 (1)
  • 5.6699 lb/ft (1)
  • 50 lb/100 (3)
  • 50 lb/EA (1)
  • 50.108 (1)
  • 50.78875 (1)
  • 57 lb/100 ft (1)
  • 57.15 lb/100;126 kg/100 (1)
  • 57.29725 (1)
  • 58 lb/100 (1)
  • 58.7695 (1)
  • 593 Pound per 100 Foot (1)
  • 6.82 lb/ft (1)
  • 60 lb/100 ft (1)
  • 61.4785 (1)
  • 63.5 lb/100 (1)
  • 65 lb/100 ft (1)
  • 68.38 lb/100 (1)
  • 7.13 lb/100 (1)
  • 7.1399 lb/ft (1)
  • 7.27 (1)
  • 7.33 (1)
  • 7.57 (1)
  • 7.67 (2)
  • 7.81 lb/100 (1)
  • 70.5 lb/100 (1)
  • 708 lb/100 ft (1)
  • 73.94 lb/100;163 kg/100 (1)
  • 78 lb/100 ft (1)
  • 8.40 (1)
  • 8.5 lb/100 (1)
  • 8.6 lb/ft (1)
  • 8.89 (1)
  • 8.9 lb (4.0 kg) (1)
  • 80 lb/100 ft (1)
  • 85 Pound per 100 Foot (2)
  • 88.00 lb;39.92 kg (1)
  • 9.45 (1)
  • Show More...

• Cable Size

  

  • #3/0,#4/0 (1)
  • 0.420 To 0.700 In OD (1)
  • 1 In Conduit/Cable (1)
  • 14/2 to 10/3 (1)
  • 3/4 IN Rigid And EMT (1)
  • Rigid: 1 in (1)
  • Rigid: 1 in;EMT: 1 in (2)
  • Rigid: 1-1/4 in (1)
  • Rigid: 3; EMT: 3 (1)
  • Show More...

• Jacket Material

  

  • GRAY PVC (2)
  • PVC (17)
  • Show More...

• Wall Thickness

  

  • .280 (1)
  • .290 (1)
  • .406 (1)
  • 0.06 (3)
  • 0.065 (2)
  • 0.070 to 0.085 in;1.78 to 2.16 mm (1)
  • 0.075 to 0.090 in;1.91 to 2.29 mm (1)
  • 0.08 (4)
  • 0.085 (2)
  • 0.085 to 0.100 in;2.16 to 2.54 mm (2)
  • 0.090 to 0.105 in;2.29 to 2.67 mm (1)
  • 0.095 to 0.110 in;2.41 to 2.79 mm (1)
  • 0.1 (2)
  • 0.104 Inch (2)
  • 0.107 in (1)
  • 0.107 INCH (1)
  • 0.11 (1)
  • 0.115 (3)
  • 0.126 in (1)
  • 0.126 INCH (1)
  • 0.132 (2)
  • 0.133 INCH (2)
  • 0.138 in (1)
  • 0.138 INCH (2)
  • 0.139 in;3.53 mm (1)
  • 0.14 (1)
  • 0.140 to 0.160 in;3.56 to 4.06 mm (3)
  • 0.146 in (1)
  • 0.146 INCH (2)
  • 0.153 (2)
  • 0.17 (1)
  • 0.18 (1)
  • 0.19 (1)
  • 0.193 INCH (3)
  • 0.205 in (1)
  • 0.205 Inch (1)
  • 0.215 (1)
  • 0.215 Inch (1)
  • 0.225 Inch (2)
  • 0.235 (1)
  • 0.245 Inch (1)
  • 0.445 (1)
  • 0.515 (1)
  • 0.79 (1)
  • Show More...

• Insulation Material

  

  • Aluminum (2)
  • Silicon Bronze (5)
  • Thermoplastic (9)
  • Thermoplastic Nylon (4)
  • THHN (2)
  • Show More...

• Hub Size

  

  • 1 (4)
  • 1 in (3)
  • 1 INCH (12)
  • 1" (1)
  • 1" to 1/2" (1)
  • 1" to 3/4" (1)
  • 1/2 (2)
  • 1/2 in (1)
  • 1/2 INCH (7)
  • 1/2" (1)
  • 1/4 (1)
  • 1-1/2 (3)
  • 1-1/2 INCH (14)
  • 1-1/2" (1)
  • 1-1/2" to 1/2" (1)
  • 1-1/2" to 3/4" (1)
  • 1-1/4 (4)
  • 1-1/4 - 1-1/2 (1)
  • 1-1/4 In, 1-1/2 In (1)
  • 1-1/4 INCH (7)
  • 1-1/4" (1)
  • 1-1/4" to 1" (1)
  • 2 (5)
  • 2 in (1)
  • 2 INCH (11)
  • 2" (1)
  • 2" to 1" (1)
  • 2" to 1-1/2" (1)
  • 2-1/2 (1)
  • 2-1/2 In, 3 In (2)
  • 3 in (2)
  • 3/4 (1)
  • 3/4 in (3)
  • 3/4 INCH (15)
  • 3/4" (1)
  • 3-1/2 - 4 (1)
  • 3-1/2 In, 4 In (2)
  • 4 in (1)
  • Show More...

• Conductor Material

  

  • Copper (19)
  • CU (39)
  • Show More...

• Number Of Holes

  

  • 0 (12)
  • 1 (3)
  • 2 (1)
  • 3 (1)
  • Show More...

• Package Type

  

  • Coil (12)
  • Industructo Box (2)
  • Reel (1)
  • Show More...

• Number Of Knockouts

  

  • 1 (1)
  • 10 (1)
  • 16 (2)
  • 2 (1)
  • 22 (1)
  • 24 (1)
  • 8 (1)
  • Show More...

• Category Description

  

  • 4 SQ BOXES (10)
  • ALL PLASTIBOND FITTINGS (83)
  • ANCHORS & ANCHOR KITS (2)
  • BEAM, RA, EDGE, & PARALLEL CLAMPS (84)
  • BITS, BLADES, AND HOLE SAWS (2)
  • BOX SUPPORT (4)
  • BX & MC (58)
  • CABLE & PIPE TRANSITS (14)
  • CADDY (STRAPS ONLY) (17)
  • Conduit & Raceways (1)
  • CONDUIT HANGERS/STAND OFF STRAPS (40)
  • CORD CONNECTORS & CORD GRIPS (4)
  • COUPLINGS, ADAPTERS, REDUCERS, BUSHINGS, & CAPS (48)
  • DIECAST EMT FITTINGS (129)
  • Electrical Metallic Tubing (EMT) (1)
  • EMT Conduit (7)
  • EMT ELBOWS (26)
  • EMT STRAPS (4)
  • FASTENERS (4)
  • FLEX & MC FITTINGS (8)
  • FLOOR BOXES (4)
  • FORM 5 CONDULETS, COVERS, & GASKETS (19)
  • FORM 7, 8, CONDULETS, COVERS, & GASKETS (38)
  • Fuses & Fuse Accessories (46)
  • GRC Conduit (10)
  • HAND TOOLS (25)
  • HAZARDOUS LOCATION FITTINGS (9)
  • IMC Conduit (9)
  • Liquid Tight (34)
  • Locknuts, Bushings, Re-Bushings, Re-Washers, Threaded Plugs, Knockout Plugs (57)
  • METALLIC FITTINGS (13)
  • MISC FITTINGS (3)
  • NON-METALLIC FITTINGS (3)
  • OCTAGON BOXES (1)
  • Panduit & Wiremold Metallic & Non-Metallic Raceways (1)
  • Plastibond, Fiberglass Conduit & Fittings (1)
  • PLASTIC BOXES (2)
  • RIGID COUPLINGS (28)
  • RIGID ELBOWS (42)
  • RIGID NIPPLES (146)
  • RIGID STRAPS & CLAMPBACKS (1)
  • Screws, Bolts, Staples, Jack Chains, Washers & TY-Raps (5)
  • SERVICE ENTRANCE FITTINGS: Weatherheads & Grounding Fittings & Ground Rods (7)
  • Stainless Rigid Conduit (36)
  • Stainless Steel EMT Conduit (51)
  • STEEL BOXES & COVERS (47)
  • STEEL EMT FITTINGS (106)
  • STEEL GREENFIELD (21)
  • STEEL JUNCTION BOXES (1)
  • STRUT CHANNEL (5)
  • STRUT STRAPS (85)
  • SURGE SUPRESSION PRODUCTS (1)
  • SWITCH BOXES (11)
  • TEMP. POWER PANELS & ACCESSORIES (3)
  • Under Counter Fixtures (4)
  • Watertight Hub, 3-PIECE COUPLINGS, THREADLESS COUPLINGS AND THREADLESS CONNECTOR (19)
  • Show More...

• Applicable Standard

  

  • ANSI C80.1 (43)
  • ANSI C80.1, Federal Specification WW-C-563 (34)
  • ANSI C80.1, NEMA (70)
  • ANSI C80.1, NEMA RN-1 (7)
  • ANSI C80.3, Fed Spec WW-C-563 (3)
  • ANSI C80.3, Federal Specification WW-C-563 (5)
  • ANSI C80.3, WW-C-563 (21)
  • ISO 9001 (14)
  • Show More...

• Used On

  

  • CONDUIT (2)
  • EMT CONDUIT (3)
  • RIGID CONDUIT (80)
  • RIGID/IMC CONDUIT (1)
  • Show More...

• Construction

  

  • 1 (1)
  • 2-Piece (9)
  • Conduit Hanger Assembly (1)
  • Die-Cast (3)
  • Drawn (17)
  • Number Of Conductors (1)
  • ONE PIECE (2)
  • One piece hanger with nut and bolt (8)
  • Pre-galvinized steel (1)
  • Rugged Steel (2)
  • TWO PIECE (74)
  • Welded (24)
  • Show More...

• Bend Angle

  

  • 05156 (8)
  • 15 Degree (4)
  • 22 Degree (3)
  • 22-1/2 IN (4)
  • 30 A (1)
  • 30 Degree (7)
  • 37373 (8)
  • 45 DEG (7)
  • 45 Degree (12)
  • 90 Degree (50)
  • Show More...

• Standard Package

  

  • 1 (1)
  • 1 PER CASE (71)
  • 10 (6)
  • 10 PER CARTON (22)
  • 10 PER CASE (5)
  • 100 PER CASE (1)
  • 100 W (3)
  • 12 (5)
  • 12 PER CASE (1)
  • 1270 Foot (2)
  • 15 PER CASE (2)
  • 150 Ft (1)
  • 170 Foot per Bundle (1)
  • 190 Ft (3)
  • 2 (1)
  • 2 PER CASE (1)
  • 20 (3)
  • 20 PER CASE (4)
  • 2170 Foot (2)
  • 25 (14)
  • 25 PER CARTON (39)
  • 25 PER CASE (40)
  • 250 PER CASE (1)
  • 250 VAC (1)
  • 2710 Foot (2)
  • 28 Per Case (1)
  • 3 in (1)
  • 3 PER CARTON (2)
  • 30 (1)
  • 30 PER CASE (4)
  • 300 Foot per Bundle (1)
  • 330 Ft (2)
  • 35 per Case (2)
  • 370 Ft (2)
  • 380 Foot per Bundle (1)
  • 4 PER CARTON (2)
  • 4 per Case (2)
  • 40 PER CASE (1)
  • 5 PER CARTON (9)
  • 50 FT (5)
  • 50 PER CARTON (3)
  • 50 PER CASE (15)
  • 6 (1)
  • 6 PER CARTON (2)
  • 610 Foot (2)
  • 8 PER CASE (1)
  • 8 W (3)
  • 910 Foot (4)
  • BULK (15)
  • Show More...

• Mounting

  

  • 1/2 In Setback VP Bracket (1)
  • Between Enclosure and Conduit (6)
  • Bolt (1)
  • BOX (1)
  • CHANNEL (51)
  • Commercial / Institutional Buildings / Structures - Commercial / Institutional Buildings / Structures - Other (3)
  • EAR (2)
  • Hold Tite, Ear (1)
  • No bracket (7)
  • SCREW (1)
  • Screw-In (10)
  • Slotted cover holes for nails or screws (1)
  • Snap In Mount (2)
  • VMS Bracket (1)
  • VS Bracket (1)
  • Show More...

• Type

  

  • 2-HOLE (2)
  • 45 DEG Conduit Elbow (6)
  • 90 DEG Conduit Elbow (12)
  • 90 DEG Gland Compression Short Connector (1)
  • AC (1)
  • AC-90® Steel Armored Cable Type AC (1)
  • Adjustable mud ring (1)
  • Aluminum Ground Clamp (2)
  • BAG (1)
  • Bar Hangers (3)
  • Beam Clamp with Conduit Clip (1)
  • Beam Clamps (3)
  • Benfield® Head Iron Conduit Bender (1)
  • Blank Clip Cover With Screw (3)
  • Blank Cover With Screw (3)
  • Bolt on accessories (6)
  • BOX (6)
  • BS-A Series Domed Top Design Cover (4)
  • Cable and conduit hanger (9)
  • Cable Caps (2)
  • Cable conduit to wire fastener (1)
  • Cable Strap (1)
  • Cable/Conduit to Stud (3)
  • Carbide Tipped Hole Cutter (2)
  • C-clamp (1)
  • CLAMP (2)
  • Clamp, RC Beam (2)
  • Clamps and Clips (2)
  • Close (2)
  • Close Length Conduit Nipple (10)
  • COMBINATION (1)
  • COMPRESSION (2)
  • Compression Couplings & Connectors (4)
  • CONDUIT (4)
  • Conduit and Box Support Fastener (1)
  • Conduit Bender (1)
  • Conduit Bender Handle (1)
  • Conduit Body Assemblies (18)
  • Conduit Body Cover With Gasket (5)
  • Conduit body, cover and gasket (8)
  • Conduit Body;Rigid (41)
  • Conduit cable fastener and support (1)
  • Conduit Clip (1)
  • Conduit Coupling (18)
  • Conduit Elbow (21)
  • Conduit Elbow - Standard Radius (1)
  • CONDUIT HANGER (6)
  • CONDUIT HANGER WITH BOLT (1)
  • Conduit Hangers (17)
  • Conduit Hangers with Bolt and Nut (4)
  • Conduit hub (4)
  • Conduit Locknut (1)
  • Conduit Nipple (82)
  • Conduit plug (4)
  • Conduit Straps & Hangers (1)
  • Conduit to beam fastener (7)
  • Conduit to conduit fastener (1)
  • CONDUIT TO STRUT (9)
  • Conduit to stud fastener (1)
  • Conduit trapeze support (4)
  • Conduit, Cable & Pipe Supports (7)
  • Conduit-PVC Coated (4)
  • COUPLING (25)
  • COVER (4)
  • Dual Universal Strap (1)
  • EDGE (2)
  • Edge Type Clamp (4)
  • eFab (3)
  • EMT (14)
  • EMT Conduit Compression Coupling (13)
  • EMT Conduit Fittings (15)
  • EMT Conduit Set Screw Coupling (7)
  • EMT Conduit Straight Compression Connector (4)
  • Expansion coupling (6)
  • Extension Ring (1)
  • Extension Rings (1)
  • FEMALE/FEMALE (1)
  • Fish Tape (2)
  • Flex (4)
  • Flexible Steel Conduit (1)
  • Flush Service (4)
  • FMC-RWS (14)
  • FMC-SWp (2)
  • Foam conduit piston for IMC and Rigid (4)
  • Foam piston for all conduit types (5)
  • Gang box (2)
  • Gang Boxes (3)
  • Gasket for use with FM7 conduit bodies. (1)
  • Ground Hub Swing Type (3)
  • Grounding Connectors-Straight (3)
  • Hanger (7)
  • Hanger, Conduit and Pipe (1)
  • Hangers (1)
  • Heavy Duty Bronze Ground Clamps (2)
  • Insulating Bushing (1)
  • Integral gasket cover (2)
  • LA (4)
  • Liquid Tight Flexible Metallic Conduit (4)
  • Liquidtight connector (8)
  • Liquidtight Flexible Metal Conduit (4)
  • Locknut for Conduit Fitting (2)
  • Locknuts (16)
  • LTM-UL (10)
  • Manual Knockout Set (1)
  • Masonry Box (7)
  • Masonry Boxes (5)
  • MC (43)
  • MC Tuff® Lightweight Steel Cable (1)
  • MCAP HCF (1)
  • MCMN (1)
  • MC-Plus® Neutral Per Phase Steel Armored Cable (1)
  • MC-Stat® Steel Cable (2)
  • Metallic Liquidtight Fittings (3)
  • MN (1)
  • Multi-grip and offset pipe clamp (4)
  • Nipple (4)
  • Non-gangable switch box (1)
  • NPP (2)
  • O.D. pipe and conduit clamp (15)
  • Octagon outlet box (5)
  • Octogonal Boxes (3)
  • One Hole Service Entrance Strap (1)
  • Other enclosure accessories (2)
  • Outlet Box Covers (1)
  • Outlet Boxes (5)
  • PARALLEL (3)
  • Pipe clamps and accessories (4)
  • Pipe Hanger (1)
  • Pipe Straps, Pipe Clamps & Hangers (Series 700) (43)
  • Pipe Straps, Pipe Clamps and Hangers (2)
  • PIPE/EMT CONDUIT TO STRUT (7)
  • PIPE/RIGID CONDUIT TO STRUT (10)
  • Pipe/Tube to Strut (4)
  • PLUG (1)
  • PolyTuff® II Liquidtight Tubing (1)
  • PolyTuff® Non-Metallic Liquidtight Fittings (2)
  • PolyTuff® SwivelLok® Non-Metallic Liquidtight Fittings (1)
  • Pre-assembled O.D. pipe and conduit clamp (32)
  • Pre-assembled thinwall conduit clamp (1)
  • Raceway (3)
  • Raintight compression coupling (9)
  • Recessed Head Close-Up Plug (3)
  • Recessed Service (2)
  • Reducing Bushing (7)
  • Reducing Bushings (3)
  • Reducing Washer (6)
  • Reducing Washer for Conduit Systems (2)
  • Replacement Die for SPEED PUNCH® Knockout Punches (3)
  • Replacement Punch for SPEED PUNCH® Knockout Punches (1)
  • RIGHT ANGLE (12)
  • Right Angle Conduit Clamp (1)
  • RIGID (7)
  • Rigid/IMC and EMT conduit (8)
  • Rigid/IMC Conduit Fittings (1)
  • ROUND BEND (3)
  • Round Boxes (1)
  • Screw Gun Brackets and Accessories (1)
  • Sealing Gasket Assembly for Liquidtight Flexible Metal Conduit Connectors (2)
  • Sealing Lock Nut (1)
  • Sealing Locknut (6)
  • SET SCREW (1)
  • Snap Close Clamps (9)
  • Snap-on (4)
  • SPECIAL RADIUS (16)
  • SPEED PUNCH® replacement die (2)
  • SQUARE (1)
  • Square Boxes (1)
  • Square Corner Switch Box (1)
  • Square Head Close-Up Plug (2)
  • Square outlet box (11)
  • Squeeze Connectors (6)
  • Stainless Steel LB Conduit Bodies (1)
  • Stainless Steel Rigid Conduit (3)
  • Stainless Steel STRUT CLAMP (3)
  • Stainless Steel T Conduit Body (1)
  • STANDARD RADIUS (22)
  • STRAIGHT (77)
  • Strut (18)
  • Strut & Strut Accessories (5)
  • Strut pipe clamps and accessories (1)
  • Stud fastener and accessories (2)
  • Switch box (4)
  • Switch Boxes (4)
  • T-bar fastener and spacers (1)
  • Thinwall conduit clamp (1)
  • THREADED (3)
  • THREADED FEMALE (12)
  • Three Piece Knockout Seal (2)
  • Three-Piece Couplings (4)
  • Through Stud Cable/Conduit Supports (1)
  • Traditional Lightweight Type MC Cable With Ground And Neutral (1)
  • Two Gang Commercial Metal Recessed TV Box (1)
  • Two Hole Pipe Strap (1)
  • Type C Conduit Outlet Body (3)
  • Type LB Conduit Outlet Body (5)
  • Type LL Conduit Outlet Body (2)
  • Type LR Conduit Outlet Body (3)
  • Vibration and cushion clamp (1)
  • Wedge nut cover with integral gasket (1)
  • Wire Mesh Strain Relief (2)
  • Show More...